summaryrefslogtreecommitdiffstats
path: root/drivers/lightnvm
AgeCommit message (Collapse)AuthorFilesLines
2017-02-15lightnvm: set default lun range when no luns are specifiedMatias Bjørling1-0/+5
The create target ioctl takes a lun begin and lun end parameter, which defines the range of luns to initialize a target with. If the user does not set the parameters, it default to only using lun 0. Instead, defaults to use all luns in the OCSSD, as it is the usual behaviour users want. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-15lightnvm: fix off-by-one error on target initializationMatias Bjørling1-2/+2
If one specifies the end lun id to be the absolute number of luns, without taking zero indexing into account, the lightnvm core will pass the off-by-one end lun id to target creation, which then panics during nvm_ioctl_dev_create. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: allow targets to use sysfsJavier González1-0/+9
In order to register through the sysfs interface, a driver needs to know its kobject. On a disk structure, this happens when the partition information is added (device_add_disk), which for lightnvm takes place after the target has been initialized. This means that on target initialization, the kboject has not been created yet. This patch adds a target function to let targets initialize their own kboject as a child of the disk kobject. Signed-off-by: Javier González <javier@cnexlabs.com> Added exit typedef and passed gendisk instead of void pointer for exit. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: free properly on target creation errorJavier González1-1/+1
Fix a memory leak when target creation fails. More specifically, free the entire device structure given to the target (tgt_dev). Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: use end_io callback instead of instanceMatias Bjørling3-11/+6
When the lightnvm core had the "gennvm" layer between the device and the target, there was a need for the core to be able to figure out which target it should send an end_io callback to. Leading to a "double" end_io, first for the media manager instance, and then for the target instance. Now that core and gennvm is merged, there is no longer a need for this, and a single end_io callback will do. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: reduce number of nvm_id groups to oneMatias Bjørling1-9/+3
The number of configuration groups has been limited to one in current code, even if there is support for up to four. With the introduction of the open-channel SSD 1.3 specification, only a single group is exposed onwards. Reflect this in the nvm_id structure. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: cleanup nvm transformation functionsMatias Bjørling1-81/+34
Going from target specific ppa addresses to device was accomplished by first converting target to generic ppa addresses and generic to device addresses. The conversion was either open-coded or used the built-in nvm_trans_* and nvm_map_* functions for conversion. Simplify the interface and cleanup the calls to provide clean functions that now either take a list of ppas or a nvm_rq, and is exposed through: void nvm_ppa_* - target to/from device with a list of PPAs, void nvm_rq_* - target to/from device with a nvm_rq. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: make nvm_map_* return voidMatias Bjørling1-32/+9
The only check there was done was a debugging check. Remove it and replace the return value with void to reduce error checking. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: remove nvm_get_bb_tbl and nvm_set_bb_tblMatias Bjørling1-36/+4
Since the merge of gennvm and core, there is no longer a need for the device specific bad block functions. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: remove nvm_submit_ppa* functionsMatias Bjørling1-109/+0
The nvm_submit_ppa* functions are no longer needed after gennvm and core have been merged. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: collapse nvm_erase_ppa and nvm_erase_blkMatias Bjørling1-31/+26
After gennvm and core have been merged, there are no more callers to nvm_erase_ppa. Therefore collapse the device specific and target specific erase functions. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31lightnvm: merge gennvm with coreMatias Bjørling6-1654/+596
For the first iteration of Open-Channel SSDs, it was anticipated that there could be various media managers on top of an open-channel SSD, such to allow vendors to plug in their own host-side FTLs, without the media manager in between. Now that an Open-Channel SSD is exposed as a traditional block device, there is no longer a need for this. Therefore lets merge the gennvm code with core and simplify the stack. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-13Merge tag 'char-misc-4.10-rc1' of ↵Linus Torvalds1-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
2016-11-29lightnvm: transform target get/set bad blockJavier González3-8/+73
Since targets are given a virtual target device, it is necessary to translate all communication between targets and the backend device. Implement the translation layer for get/set bad block table. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: use target nvm on target-specific ops.Javier González3-13/+18
On target-specific operations pass on nvm_tgt_dev instead of the generic nvm device. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: introduce max_phys_sects helper functionJavier González1-0/+8
Target devices do not have access to the device driver operations. Introduce a helper function that exposes the max. number of physical sectors supported by the underlying device. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: introduce helpers for generic ops in rrpcJavier González3-15/+34
Avoid calling media manager and device-specific operations directly from rrpc. Create helper functions on lightnvm's core instead. Signed-off-by: Javier González <javier@cnexlabs.com> Made it work with null_blk as well. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: eliminate nvm_lun abstraction in mmJavier González5-145/+394
In order to naturally support multi-target instances on an Open-Channel SSD, targets should own the LUNs they get blocks from and manage provisioning internally. This is done in several steps. Since targets own the LUNs the are instantiated on top of and manage the free block list internally, there is no need for a LUN abstraction in the media manager. LUNs are intrinsically managed as in the physical layout (ch:0,lun:0, ..., ch:0,lun:n, ch:1,lun:0, ch:1,lun:n, ..., ch:m,lun:0, ch:m,lun:n) and given to the targets based on the target creation ioctl. This simplifies LUN management and clears the path for a partition manager to sit directly underneath LightNVM targets. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: eliminate nvm_block abstraction on mmJavier González4-283/+189
In order to naturally support multi-target instances on an Open-Channel SSD, targets should own the LUNs they get blocks from and manage provisioning internally. This is done in several steps. A part of this transformation is that targets manage their blocks internally. This patch eliminates the nvm_block abstraction and moves block management to the target logic. The rrpc target is transformed. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: remove debug lun statistics from gennvmJavier González1-19/+0
Since LUNs are managed internally on targets, the media manager has no access to the free LUN lists. Thus, debug functions that show LUN information on the device should not be implemented on the media manager, but rather on the target in itself. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: remove get_lun operation on gennvmJavier González2-24/+12
Since LUNs are managed internally on the target, there is no need for the media manager to implement a get_lun operation. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: move block provisioning to targetsJavier González5-228/+290
In order to naturally support multi-target instances on an Open-Channel SSD, targets should own the LUNs they get blocks from and manage provisioning internally. This is done in several steps. This patch moves the block provisioning inside of the target and removes the get/put block interface from the media manager. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: manage lun partitions internally in mmJavier González2-20/+49
LUNs are exclusively owned by targets implementing a block device FTL. Doing this reservation requires at the moment a 2-way callback gennvm <-> target. The reason behind this is that LUNs were not assumed to always be exclusively owned by targets. However, this design decision goes against I/O determinism QoS (two targets would mix I/O on the same parallel unit in the device). This patch makes LUN reservation as part of the target creation on the media manager. This makes that LUNs are always exclusively owned by the target instantiated on top of them. LUN stripping and/or sharing should be implemented on the target itself or the layers on top. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: remove gen_lun abstractionJavier González2-58/+43
The gen_lun abstraction in the generic media manager was conceived on the assumption that a single target would instantiated on top of it. This has complicated target design to implement multi-instances. Remove this abstraction and move its logic to nvm_lun, which manages physical lun geometry and operations. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: use constant name instead of valueJavier González1-1/+1
There is a constant to refer to free blocks. Use it when marking bad blocks instead of using a constant value Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: remove unnecessary variables in rrpcJavier González2-9/+0
Before vectored I/Os were supported on rrpc, the physical address was stored as part of the nvm_rqd request. This variable become obsolete when the ppa_list was introduced. Cleanup this variable. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: make address conversion functions globalJavier González1-30/+0
Targets are assumed to used the same generic ppa format, where the address is partitioned on ch:lun:block:pg:pl:sec. Thus, make the function in charge of transforming the ppa address from a linear format to the generic one available to all targets. This function will be needed by the media manager in order to do target mapping translations when targets are divided on different physical partitions. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: remove sysfs configuration interfaceJavier González1-134/+0
LightNVM used to be managed and configured through sysfs. Since the introduction of management ioctls this interface is redundant and outdated. Get rid of it. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: rrpc: split bios of size > 256kbJavier González1-0/+2
rrpc cannot handle bios of size > 256kb due to NVMe using a 64 bit bitmap to signal I/O completion. If a larger bio comes, split it explicitly. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: export set bad block tableJavier González4-49/+65
Bad blocks should be managed by block owners. This would be either targets for data blocks or sysblk for system blocks. In order to support this, export two functions: One to mark a block as an specific type (e.g., bad block) and another to update the bad block table on the device. Move bad block management to rrpc. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: do not protect block 0Javier González1-6/+0
Device blocks should be marked by the device and considered as bad blocks by the media manager. Thus, do not make assumptions on which blocks are going to be used by the device. In doing so we might lose valid blocks from the free list. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29lightnvm: enable to send hint to erase commandJavier González4-9/+11
Erases might be subject to host hints. An example is multi-plane programming to erase blocks in parallel. Enable targets to specify this hint. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29nvme: lightnvm: attach lightnvm sysfs to nvme block deviceMatias Bjørling4-248/+2
Previously, LBA read and write were not supported in the lightnvm specification. Now that it supports it, lets use the traditional NVMe gendisk, and attach the lightnvm sysfs geometry export. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10lightnvm: make core.c explicitly non-modularPaul Gortmaker1-8/+6
The Kconfig currently controlling compilation of this code is: drivers/lightnvm/Kconfig:menuconfig NVM drivers/lightnvm/Kconfig: bool "Open-Channel SSD target support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_misc_driver translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We replace module.h with moduleparam.h because this file still uses module params to control behaviour. Also note that MODULE_ALIAS is a no-op for non-modular code. Cc: Matias Bjorling <mb@lightnvm.io> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07Merge branch 'for-4.9/block' of git://git.kernel.dk/linux-blockLinus Torvalds5-34/+258
Pull block layer updates from Jens Axboe: "This is the main pull request for block layer changes in 4.9. As mentioned at the last merge window, I've changed things up and now do just one branch for core block layer changes, and driver changes. This avoids dependencies between the two branches. Outside of this main pull request, there are two topical branches coming as well. This pull request contains: - A set of fixes, and a conversion to blk-mq, of nbd. From Josef. - Set of fixes and updates for lightnvm from Matias, Simon, and Arnd. Followup dependency fix from Geert. - General fixes from Bart, Baoyou, Guoqing, and Linus W. - CFQ async write starvation fix from Glauber. - Add supprot for delayed kick of the requeue list, from Mike. - Pull out the scalable bitmap code from blk-mq-tag.c and make it generally available under the name of sbitmap. Only blk-mq-tag uses it for now, but the blk-mq scheduling bits will use it as well. From Omar. - bdev thaw error progagation from Pierre. - Improve the blk polling statistics, and allow the user to clear them. From Stephen. - Set of minor cleanups from Christoph in block/blk-mq. - Set of cleanups and optimizations from me for block/blk-mq. - Various nvme/nvmet/nvmeof fixes from the various folks" * 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits) fs/block_dev.c: return the right error in thaw_bdev() nvme: Pass pointers, not dma addresses, to nvme_get/set_features() nvme/scsi: Remove power management support nvmet: Make dsm number of ranges zero based nvmet: Use direct IO for writes admin-cmd: Added smart-log command support. nvme-fabrics: Add host_traddr options field to host infrastructure nvme-fabrics: revise host transport option descriptions nvme-fabrics: rework nvmf_get_address() for variable options nbd: use BLK_MQ_F_BLOCKING blkcg: Annotate blkg_hint correctly cfq: fix starvation of asynchronous writes blk-mq: add flag for drivers wanting blocking ->queue_rq() blk-mq: remove non-blocking pass in blk_mq_map_request blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue() block: export bio_free_pages to other modules lightnvm: propagate device_add() error code lightnvm: expose device geometry through sysfs lightnvm: control life of nvm_dev in driver blk-mq: register device instead of disk ...
2016-09-21lightnvm: propagate device_add() error codeArnd Bergmann2-4/+7
device_add() may fail, and all callers are supposed to check the return value, but one new user in lightnvm doesn't: drivers/lightnvm/sysfs.c: In function 'nvm_sysfs_register_dev': drivers/lightnvm/sysfs.c:184:2: error: ignoring return value of 'device_add', declared with attribute warn_unused_result [-Werror=unused-result] This changes the caller to propagate any error codes, which avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 38c9e260b9f9 ("lightnvm: expose device geometry through sysfs") Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21lightnvm: expose device geometry through sysfsSimon A. F. Lund4-7/+245
For a host to access an Open-Channel SSD, it has to know its geometry, so that it writes and reads at the appropriate device bounds. Currently, the geometry information is kept within the kernel, and not exported to user-space for consumption. This patch exposes the configuration through sysfs and enables user-space libraries, such as liblightnvm, to use the sysfs implementation to get the geometry of an Open-Channel SSD. The sysfs entries are stored within the device hierarchy, and can be found using the "lightnvm" device type. An example configuration looks like this: /sys/class/nvme/ └── nvme0n1 ├── capabilities: 3 ├── device_mode: 1 ├── erase_max: 1000000 ├── erase_typ: 1000000 ├── flash_media_type: 0 ├── media_capabilities: 0x00000001 ├── media_type: 0 ├── multiplane: 0x00010101 ├── num_blocks: 1022 ├── num_channels: 1 ├── num_luns: 4 ├── num_pages: 64 ├── num_planes: 1 ├── page_size: 4096 ├── prog_max: 100000 ├── prog_typ: 100000 ├── read_max: 10000 ├── read_typ: 10000 ├── sector_oob_size: 0 ├── sector_size: 4096 ├── media_manager: gennvm ├── ppa_format: 0x380830082808001010102008 ├── vendor_opcode: 0 ├── max_phys_secs: 64 └── version: 1 Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21lightnvm: control life of nvm_dev in driverMatias Bjørling1-27/+8
LightNVM compatible device drivers does not have a method to expose LightNVM specific sysfs entries. To enable LightNVM sysfs entries to be exposed, lightnvm device drivers require a struct device to attach it to. To allow both the actual device driver and lightnvm sysfs entries to coexist, the device driver tracks the lifetime of the nvm_dev structure. This patch refactors NVMe and null_blk to handle the lifetime of struct nvm_dev, which eliminates the need for struct gendisk when a lightnvm compatible device is provided. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21nvme: refactor namespaces to support non-gendisk devicesMatias Bjørling1-0/+2
With LightNVM enabled namespaces, the gendisk structure is not exposed to the user. This prevents LightNVM users from accessing the NVMe device driver specific sysfs entries, and LightNVM namespace geometry. Refactor the revalidation process, so that a namespace, instead of a gendisk, is revalidated. This later allows patches to wire up the sysfs entries up to a non-gendisk namespace. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21lightnvm: NVM should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `nvme_nvm_dev_dma_free': lightnvm.c:(.text+0x23df1a): undefined reference to `dma_pool_free' drivers/built-in.o: In function `nvme_nvm_dev_dma_alloc': lightnvm.c:(.text+0x23df38): undefined reference to `dma_pool_alloc' drivers/built-in.o: In function `nvme_nvm_destroy_dma_pool': lightnvm.c:(.text+0x23df4c): undefined reference to `dma_pool_destroy' drivers/built-in.o: In function `nvme_nvm_create_dma_pool': lightnvm.c:(.text+0x23df7e): undefined reference to `dma_pool_create' and ERROR: "dma_pool_destroy" [drivers/nvme/host/nvme-core.ko] undefined! ERROR: "dma_pool_free" [drivers/nvme/host/nvme-core.ko] undefined! ERROR: "dma_pool_alloc" [drivers/nvme/host/nvme-core.ko] undefined! ERROR: "dma_pool_create" [drivers/nvme/host/nvme-core.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-31miscdevice: Use module_misc_device() macroPrasannaKumar Muralidharan1-18/+1
This patch removes module_init()/module_exit() from driver code by using module_misc_device() macro. All modules in this patch has a print statement which is removed when module_misc_device() macro is used. If undesirable this patch can be dropped entirely, this is the only purpose of making this as a separate patch. Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-20block: get rid of bio_rw and READAChristoph Hellwig1-2/+2
These two are confusing leftover of the old world order, combining values of the REQ_OP_ and REQ_ namespaces. For callers that don't special case we mostly just replace bi_rw with bio_data_dir or op_is_write, except for the few cases where a switch over the REQ_OP_ values makes more sense. Any check for READA is replaced with an explicit check for REQ_RAHEAD. Also remove the READA alias for REQ_RAHEAD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: make __nvm_submit_ppa staticMatias Bjørling1-1/+1
The __nvm_submit_ppa() function is not used outside lightnvm core. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: make ppa_list const in nvm_set_rqd_listMatias Bjørling1-3/+5
The passed by reference ppa list in nvm_set_rqd_list() is updated when multiple planes are available. In that case, each PPA plane is incremented when the device side PPA list is created. This prevents the caller to rely on the PPA list to be unmodified after a call. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: fix lun offset calculation for mark blkMatias Bjørling1-1/+1
The gen_mark_blk_bad function marks the wrong block when a block is on a different channel. Fix the index calculation, so that it updates the correct block. Reported-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: make rrpc_map_page call nvm_get_blk outside locksMatias Bjørling2-43/+66
The nvm_get_blk() function is called with rlun->lock held. This is ok when the media manager implementation doesn't go out of its atomic context. However, if a media manager persists its metadata, and guarantees that the block is given to the target, this is no longer a viable approach. Therefore, clean up the flow of rrpc_map_page, and make sure that nvm_get_blk() is called without any locks acquired. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove _unlocked variant of [get/put]_blkMatias Bjørling3-54/+6
The [get/put]_blk API enables targets to get ownership of blocks at runtime. This information is currently not recorded on disk, and the information is therefore lost on power failure. To restore the metadata, the [get/put]_blk must persist its metadata. In that case, we need to control the outer lock, so that we can disable them while updating the on-disk metadata. Fortunately, the _unlocked versions can be removed, which allows us to move the lock into the [get/put]_blk functions. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove unused lists from struct rrpc_blockMatias Bjørling2-17/+0
The ->list, ->open_list, and ->closed_list lists were previously used for statistics. However, their usage have been removed, and thus these can safely be removed. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove nested lock conflict with mmMatias Bjørling1-4/+5
If a media manager tries to initialize it targets upon media manager initialization, the media manager will need to know which target types are available in LightNVM. The lists of which managers and target types are available shares the same lock. Therefore, on initialization, the nvm_lock is taken by LightNVM core, which later leads to a deadlock when target types are enumerated by the media manager. Add an exclusive lock for target types to resolve this conflict. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: move target mgmt into media mgrMatias Bjørling3-159/+196
To enable persistent block management to easily control creation and removal of targets, we move target management into the media manager. The LightNVM core continues to maintain which target types are registered, while the media manager now keeps track of its initialized targets. Two new callbacks for the media manager are introduced. create_tgt and remove_tgt. Note that remove_tgt returns 0 on successfully removing a target, and returns 1 if the target was not found. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>