summaryrefslogtreecommitdiffstats
path: root/drivers/lightnvm
AgeCommit message (Collapse)AuthorFilesLines
2016-07-20block: get rid of bio_rw and READAChristoph Hellwig1-2/+2
These two are confusing leftover of the old world order, combining values of the REQ_OP_ and REQ_ namespaces. For callers that don't special case we mostly just replace bi_rw with bio_data_dir or op_is_write, except for the few cases where a switch over the REQ_OP_ values makes more sense. Any check for READA is replaced with an explicit check for REQ_RAHEAD. Also remove the READA alias for REQ_RAHEAD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: make __nvm_submit_ppa staticMatias Bjørling1-1/+1
The __nvm_submit_ppa() function is not used outside lightnvm core. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: make ppa_list const in nvm_set_rqd_listMatias Bjørling1-3/+5
The passed by reference ppa list in nvm_set_rqd_list() is updated when multiple planes are available. In that case, each PPA plane is incremented when the device side PPA list is created. This prevents the caller to rely on the PPA list to be unmodified after a call. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: fix lun offset calculation for mark blkMatias Bjørling1-1/+1
The gen_mark_blk_bad function marks the wrong block when a block is on a different channel. Fix the index calculation, so that it updates the correct block. Reported-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: make rrpc_map_page call nvm_get_blk outside locksMatias Bjørling2-43/+66
The nvm_get_blk() function is called with rlun->lock held. This is ok when the media manager implementation doesn't go out of its atomic context. However, if a media manager persists its metadata, and guarantees that the block is given to the target, this is no longer a viable approach. Therefore, clean up the flow of rrpc_map_page, and make sure that nvm_get_blk() is called without any locks acquired. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove _unlocked variant of [get/put]_blkMatias Bjørling3-54/+6
The [get/put]_blk API enables targets to get ownership of blocks at runtime. This information is currently not recorded on disk, and the information is therefore lost on power failure. To restore the metadata, the [get/put]_blk must persist its metadata. In that case, we need to control the outer lock, so that we can disable them while updating the on-disk metadata. Fortunately, the _unlocked versions can be removed, which allows us to move the lock into the [get/put]_blk functions. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove unused lists from struct rrpc_blockMatias Bjørling2-17/+0
The ->list, ->open_list, and ->closed_list lists were previously used for statistics. However, their usage have been removed, and thus these can safely be removed. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove nested lock conflict with mmMatias Bjørling1-4/+5
If a media manager tries to initialize it targets upon media manager initialization, the media manager will need to know which target types are available in LightNVM. The lists of which managers and target types are available shares the same lock. Therefore, on initialization, the nvm_lock is taken by LightNVM core, which later leads to a deadlock when target types are enumerated by the media manager. Add an exclusive lock for target types to resolve this conflict. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: move target mgmt into media mgrMatias Bjørling3-159/+196
To enable persistent block management to easily control creation and removal of targets, we move target management into the media manager. The LightNVM core continues to maintain which target types are registered, while the media manager now keeps track of its initialized targets. Two new callbacks for the media manager are introduced. create_tgt and remove_tgt. Note that remove_tgt returns 0 on successfully removing a target, and returns 1 if the target was not found. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: rename gennvm and update descriptionMatias Bjørling3-99/+102
The generic manager should be called the general media manager, and instead of using the rather long name of "gennvm" in front of each data structures, use "gen" instead to shorten it. Update the description of the media manager as well to make the media manager purpose clearer. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove open/close statistics for gennvmMatias Bjørling2-30/+6
The responsibility of the media manager is not to keep track of open/closed blocks. This is better maintained within a target, that already manages this information on writes. Remove the statistics and merge the states NVM_BLK_ST_OPEN and NVM_BLK_ST_CLOSED. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: fix checkpatch terse errorsMatias Bjørling1-2/+5
A couple of small checkpatch fixups to stop it from complaining. ./drivers/lightnvm/core.c:360: WARNING: line over 80 characters ./drivers/lightnvm/core.c:360: ERROR: trailing statements should be on next line ./drivers/lightnvm/core.c:503: WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: remove checkpatch warning for unsigned intsMatias Bjørling2-3/+3
Checkpatch found two incidents where the type was preferred to be written out in full. ./drivers/lightnvm/rrpc.h:184: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' ./drivers/lightnvm/rrpc.h:209: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' ./drivers/lightnvm/rrpc.c:51: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: Make functions not used by ouside staticJohannes Thumshirn2-4/+6
Mark functions not used by ouside of thier implementing file as static. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: add media manager mark_blk helperJavier González1-0/+6
Expose media manager mark_blk() to targets, as done for the rest of the media manager callback functions. Signed-off-by: Javier González <javier@cnexlabs.com> Updated description Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07lightnvm: break the loop when rqd is not nullWenwei Tao1-2/+5
Break the loop when rqd is not null to reduce an unnecessary schedule. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, fs, mm, drivers: use bio set/get op accessorsMike Christie1-3/+3
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: reserved space calculation incorrectJavier González1-1/+1
The nvm_dev->max_pages_per_blk variable was removed in favor of the new nvm->sec_per_blk variable. The ->max_pages_per_blk variable was still used in rrpc_capacity, reporting the reserved capacity to zero. Replace with ->sec_per_blk to calculate the reserved area again. Signed-off-by: Javier González <javier@cnexlabs.com> Updated patch description. Was "lightnvm: eliminate redundant variable" Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: rename nr_pages to nr_ppas on nvm_rqJavier González5-14/+14
The number of ppas contained on a request is not necessarily the number of pages that it maps to neither on the target nor on the device side. In order to avoid confusion, rename nr_pages to nr_ppas since it is what the variable actually contains. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: expose gennvm_mark_blk to targetsMatias Bjørling1-13/+14
Targets can update a block state when having a reference to an in-memory virtual block. In the case that a target does not keep the block metadata in memory, it does not have a way to update this structure. Therefore, expose gennvm_mark_blk() through the media managers ->mark_blk() callback and let targets update the state structure through this callback. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: remove mgt targets on mgt removalMatias Bjørling1-26/+43
Targets associated with a device manager are not freed on device removal. They have to be manually removed before shutdown. Make sure any outstanding targets are freed upon shutdown. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: do not assume sequential lun alloc.Javier González1-3/+2
When doing GC, rrpc calculates the physical LUN to which the rrpc block belongs too. This calculation is based on the assumption that LUNs are assigned sequentially to the LUN list. Use the reference to the LUN instead. This saves us the calculation and allows us to align LUNs in a different manner to, for example, take advantage of devide parallelism. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: rename dma helper functionsJavier González1-8/+8
Until now, the dma pool have been exclusively used to allocate the ppa list being sent to the device. In pblk (upcoming), we use these pools to allocate metadata too. Thus, we generalize the names of some variables on the dma helper functions to make the code more readable. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: do not free unused metadata on rrpcJavier González1-2/+0
rrpc does not save any metadata on a given request. Thus, do not attempt to free the metadata dma region. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: fix out of bound ppa lun id on bb tblMatias Bjørling1-6/+1
The ppa configured for retrieving the bad block table uses the internal lun id to setup the get bad block ppa. This increases monotonically with the number luns available. When configuring a ppa, the channel and lun must be specified separately, leading to an out of bound memory access in gennvm_block_bb when lun id goes beyond the luns available within a channel. Additional, remove out of bound check in gennvm_block_bb(), as it was a buggy to begin with. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: refactor set_bb_tbl for accepting ppa listMatias Bjørling1-1/+1
The set_bb_tbl takes struct nvm_rq and only uses its ppa_list and nr_pages internally. Instead, make these two variables explicit. This allows a user to call it without initializing a struct nvm_rq first. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: move responsibility for bad blk mgmt to targetMatias Bjørling1-19/+16
We move the responsibility of managing the persistent bad block table to the target. The target may choose to mark a block bad or retry writing to it. Never the less, it should be the target that makes the decision and not the media manager. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: make nvm_set_rqd_ppalist() aware of vblksMatias Bjørling2-15/+18
A virtual block enables a block to identify multiple physical blocks. This is useful for metadata where a device media supports multiple planes. In that case, a block, with multiple planes can be managed as a single vblk. Reducing the metadata required by one forth. nvm_set_rqd_ppalist() takes care of expanding a ppa_list with vblks automatically. However, for some use-cases, where only a single physical block is required, the ppa_list should not be expanded. Therefore, add a vblk parameter to nvm_set_rqd_ppalist(), and only expand the ppa_list if vblk is set. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: remove struct factory_blksMatias Bjørling1-34/+28
Now that device ops->get_bb_table no longer uses a callback, the struct factory_blks can be removed. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: refactor device ops->get_bb_tbl()Matias Bjørling3-76/+107
The device ops->get_bb_tbl() takes a callback, that allows the caller to use its own callback function to update its data structures in the returning function. This makes it difficult to send parameters to the callback, and usually is circumvented by small private structures, that both carry the callers state and any flags needed to fulfill the update. Refactor ops->get_bb_tbl() to fill a data buffer with the status of the blocks returned, and let the user call the callback function manually. That will provide the necessary flags and data structures and simplify the logic around ops->get_bb_tbl(). Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: introduce nvm_for_each_lun_ppa() macroMatias Bjørling1-38/+26
Users that wish to iterate all luns on a device. Must create a struct ppa_addr and separate iterators for channels and luns. To set the iterators, two loops are required, one to iterate channels, and another to iterate luns. This leads to decrease in readability. Introduce nvm_for_each_lun_ppa, which implements the nested loop and sets ppa, channel, and lun variable for each loop body, eliminating the boilerplate code. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: refactor dev->online_target to global nvm_targetsSimon A. F. Lund1-22/+25
A target name must be unique. However, a per-device registration of targets is maintained on a dev->online_targets list, with a per-device search for targets upon registration. This results in a name collision when two targets, with the same name, are created on two different targets, where the per-device list is not shared. Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: rename nvm_targets to nvm_tgt_typeSimon A. F. Lund2-10/+10
The functions nvm_register_target(), nvm_unregister_target() and associated list refers to a target type that is being registered by a target type module. Rename nvm_*_targets() to nvm_*_tgt_type(), so that the intension is clear. This enables target instances to use the _nvm_*_targets() naming. Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: store rrpc->soffset in device sector sizeWenwei Tao1-7/+10
Since we mainly use soffset in device sector size, we therefore store this value in rrpc->soffset, instead of the offset in 512byte sector size. This eliminates the "(ilog2(dev->sec_size) - 9)" calculation on each I/O. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Updated patch description. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: calculate rrpc total blocks and sectors up frontWenwei Tao1-4/+2
Calculate rrpc total blocks and sectors up front, make sense to use them. For example, we use rrpc->nr_sects to calculate rrpc area size, but it makes no sense if we don't initialize it up front, since it would be zero until we finish rrpc luns init. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: avoid memory leak when lun_map kcalloc failsMatias Bjørling1-23/+30
A memory leak occurs if the lower page table is initialized and the following dev->lun_map fails on allocation. Rearrange the initialization of lower page table to allow dev->lun_map to fail gracefully without memory leak. Reviewed by: Johannes Thumshirn <jthumshirn@suse.de> Move kfree of dev->lun_map to nvm_free() Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: move block fold outside of get_bb_tbl()Matias Bjørling3-15/+63
The get block table command returns a list of blocks and planes with their associated state. Users, such as gennvm and sysblk, manages all planes as a single virtual block. It was therefore natural to fold the bad block list before it is returned. However, to allow users, which manages on a per-plane block level, to also use the interface, the get_bb_tbl interface is changed to not fold by default and instead let the caller fold if necessary. Reviewed by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: add fpg_size and pfpg_size to struct nvm_devMatias Bjørling2-10/+9
The flash page size (fpg) and size across planes (pfpg) are convenient to know when allocating buffer sizes. This has previously been a calculated in various places. Replace with the pre-calculated values. Reviewed by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: implement nvm_submit_ppa_listMatias Bjørling1-19/+69
The nvm_submit_ppa function assumes that users manage all plane blocks as a single block. Extend the API with nvm_submit_ppa_list to allow the user to send its own ppa list. If the user submits more than a single PPA, the user must take care to allocate and free the corresponding ppa list. Reviewed by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: handle submit_io failureMatias Bjørling1-0/+5
The device ->submit_io() callback might fail to submit I/O to device. In that case, the nvm_submit_ppa function should not wait for completion. Instead return the ->submit_io() error. Reviewed by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-06lightnvm: fix "warning: ‘ret’ may be used uninitialized"Jeff Mahoney1-2/+2
This fixes the following warnings: drivers/lightnvm/sysblk.c:125:9: warning: ‘ret’ may be used uninitialized in this function drivers/lightnvm/sysblk.c:275:15: warning: ‘ret’ may be used uninitialized in this function In both cases, ret is only set from within a loop that may not be entered. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-18lightnvm: do not load L2P table if not supportedJavier González1-1/+1
An Open-Channel SSD can work on two modes: (i) hybrid mode, where the L2P table is maintained both by the host and by the device; and (ii) full host-based, where the L2P table is uniquely maintained by the host. In the advent of a new target implementing the full host-based mode, do not assume that the L2P table must be loaded on the generic media manager; check device properties loaded on the identify command instead. Signed-off-by: Javier González <javier@cnexlabs.com> Moved into the following statement. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-18lightnvm: do not reserve lun on l2p loadingJavier González1-3/+0
When the l2p table is loaded, addresses are checked for the lun they belong to and luns are reserved accordingly. This assumes that metadata is being stored in the backend device to recover the previous target configuration. Since this is not yet implemented, this check collides with some of the core initialization (e.g., sysblock initialization when a page is formed by several sectors). We take this check out and for now rely on that the right target will be created instead. When metadata is stored to recover a target, this check will come natural as part of the recovery strategy. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-18lightnvm: add a bitmap of lunsWenwei Tao3-29/+69
Add a bitmap of luns to indicate the status of luns: inuse/available. When create targets do the necessary check to avoid allocating luns that are already allocated. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Freed dev->lun_map if nvm_core_init later failed in the init process. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-18lightnvm: specify target's logical address areaWenwei Tao5-2/+108
We can create more than one target on a lightnvm device by specifying its begin lun and end lun. But only specify the physical address area is not enough, we need to get the corresponding non- intersection logical address area division from the backend device's logcial address space. Otherwise the targets on the device might use the same logical addresses cause incorrect information in the device's l2p table. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-18Merge branch 'for-4.6/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds4-63/+76
Pull block driver updates from Jens Axboe: "This is the block driver pull request for this merge window. It sits on top of for-4.6/core, that was just sent out. This contains: - A set of fixes for lightnvm. One from Alan, fixing an overflow, and the rest from the usual suspects, Javier and Matias. - A set of fixes for nbd from Markus and Dan, and a fixup from Arnd for correct usage of the signed 64-bit divider. - A set of bug fixes for the Micron mtip32xx, from Asai. - A fix for the brd discard handling from Bart. - Update the maintainers entry for cciss, since that hardware has transferred ownership. - Three bug fixes for bcache from Eric Wheeler. - Set of fixes for xen-blk{back,front} from Jan and Konrad. - Removal of the cpqarray driver. It has been disabled in Kconfig since 2013, and we were initially scheduled to remove it in 3.15. - Various updates and fixes for NVMe, with the most important being: - Removal of the per-device NVMe thread, replacing that with a watchdog timer instead. From Christoph. - Exposing the namespace WWID through sysfs, from Keith. - Set of cleanups from Ming Lin. - Logging the controller device name instead of the underlying PCI device name, from Sagi. - And a bunch of fixes and optimizations from the usual suspects in this area" * 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits) NVMe: Expose ns wwid through single sysfs entry drivers:block: cpqarray clean up brd: Fix discard request processing cpqarray: remove it from the kernel cciss: update MAINTAINERS NVMe: Remove unused sq_head read in completion path bcache: fix cache_set_flush() NULL pointer dereference on OOM bcache: cleaned up error handling around register_cache() bcache: fix race of writeback thread starting before complete initialization NVMe: Create discard zero quirk white list nbd: use correct div_s64 helper mtip32xx: remove unneeded variable in mtip_cmd_timeout() lightnvm: generalize rrpc ppa calculations lightnvm: remove struct nvm_dev->total_blocks lightnvm: rename ->nr_pages to ->nr_sects lightnvm: update closed list outside of intr context xen/blback: Fit the important information of the thread in 17 characters lightnvm: fold get bb tbl when using dual/quad plane mode lightnvm: fix up nonsensical configure overrun checking xen-blkback: advertise indirect segment support earlier ...
2016-03-03lightnvm: generalize rrpc ppa calculationsJavier González2-17/+40
In rrpc, some calculations assume a certain configuration (e.g., 1 LUN, 1 sector per page). The reason behind this was that LightNVM used a simple configuration with QEMU to test core features in the beginning. This patch relaxes these assumptions and generalizes calculation, allowing multiple luns to be used. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03lightnvm: remove struct nvm_dev->total_blocksMatias Bjørling1-5/+1
The struct nvm_dev->total_blocks was only used for calculating total sectors. Remove and instead calculate total sectors from the number of luns and its sectors. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03lightnvm: rename ->nr_pages to ->nr_sectsMatias Bjørling4-23/+21
The struct rrpc->nr_pages can easily be interpreted as the number of flash pages allocated to rrpc, while it is the nr_sects. Make sure that this is reflected from the variable name. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03lightnvm: update closed list outside of intr contextJavier González1-13/+10
When an I/O finishes, full blocks are moved from the open to the closed list - a lock is taken to protect the list. This happens at the moment in the interrupt context, which is not correct. This patch moves this logic to the block workqueue instead, avoiding holding a spinlock without interrupt save in an interrupt context. Signed-off-by: Javier González <javier@cnexlabs.com> Fixes: ff0e498bfa18 ("lightnvm: manage open and closed blocks sepa...") Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>