summaryrefslogtreecommitdiffstats
path: root/drivers/lguest
AgeCommit message (Collapse)AuthorFilesLines
2015-04-22Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds4-34/+86
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "Some virtio internal cleanups, a new virtio device "virtio input", and a change to allow the legacy virtio balloon. Most excitingly, some lguest work! No seriously, I got some cleanup patches" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio: drop virtio_device_is_legacy_only virtio_pci: support non-legacy balloon devices virtio_mmio: support non-legacy balloon devices virtio_ccw: support non-legacy balloon devices virtio: balloon might not be a legacy device virtio_balloon: transitional interface virtio_ring: Update weak barriers to use dma_wmb/rmb virtio_pci_modern: switch to type-safe io accessors virtio_pci_modern: type-safe io accessors lguest: handle traps on the "interrupt suppressed" iret instruction. virtio: drop a useless config read virtio_config: reorder functions Add virtio-input driver. lguest: suppress interrupts for single insn, not range. lguest: simplify lguest_iret lguest: rename i386_head.S in the comments lguest: explicitly set miscdevice's private_data NULL lguest: fix pending interrupt test.
2015-04-01lguest: now needs PCI_DIRECT.Rusty Russell1-1/+1
Since commit 8e7094694396 ("lguest: add a dummy PCI host bridge.") lguest uses PCI, but it needs you to frob the ports directly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-01lguest: handle traps on the "interrupt suppressed" iret instruction.Rusty Russell1-27/+72
Lguest's "iret" is non-atomic, as it needs to restore the interrupt state before the real iret (the guest can't actually suppress interrupts). For this reason, the host discards an interrupt if it occurs in this (1-instruction) window. We can do better, by emulating the iret execution, then immediately setting up the interrupt handler. In fact, we don't need to do much, as emulating the iret and setting up th stack for the interrupt handler basically cancel each other out. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24lguest: suppress interrupts for single insn, not range.Rusty Russell3-8/+7
The last patch reduced our interrupt-suppression region to one address, so simplify the code somewhat. Also, remove the obsolete undefined instruction ranges and the comment which refers to lguest_guest.S instead of head_32.S. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24lguest: explicitly set miscdevice's private_data NULLMartin Kepplinger1-0/+8
There is a proposed change to the miscdevice's behaviour on open(). Currently file->private_data stays NULL, but only because we don't have an open-entry in struct file_operations. This may change so that private_data, more consistently, is always set to struct miscdevice, not only *if* the driver has it's own open() routine and fops-entry, see https://lkml.org/lkml/2014/12/4/939 and commit 94e4fe2cab3d43b3ba7c3f721743006a8c9d913a In short: If we rely on file->private_data being NULL, we should ensure it is NULL ourselves. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-18Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds8-847/+252
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "OK, this has the big virtio 1.0 implementation, as specified by OASIS. On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to double-check the implementation. Then comes the inevitable fixes and cleanups from that work" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits) virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice. virtio_net: unconditionally define struct virtio_net_hdr_v1. tools/lguest: don't use legacy definitions for net device in example launcher. virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined. tools/lguest: use common error macros in the example launcher. tools/lguest: give virtqueues names for better error messages tools/lguest: more documentation and checking of virtio 1.0 compliance. lguest: don't look in console features to find emerg_wr. tools/lguest: don't start devices until DRIVER_OK status set. tools/lguest: handle indirect partway through chain. tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: rename virtio_pci_cfg_cap field to match spec. tools/lguest: fix features_accepted logic in example launcher. tools/lguest: handle device reset correctly in example launcher. virtual: Documentation: simplify and generalize paravirt_ops.txt lguest: remove NOTIFY call and eventfd facility. lguest: remove NOTIFY facility from demonstration launcher. lguest: use the PCI console device's emerg_wr for early boot messages. lguest: always put console in PCI slot #1. ...
2015-02-11lguest: remove NOTIFY call and eventfd facility.Rusty Russell4-213/+9
Disappointing, as this was kind of neat (especially getting to use RCU to manage the address -> eventfd mapping). But now the devices are PCI handled in userspace, we get rid of both the NOTIFY hypercall and the interface to connect an eventfd. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: remove support for lguest bus.Rusty Russell2-543/+0
The demonstration launcher now uses PCI entirely. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add iomem region, where guest page faults get sent to userspace.Rusty Russell4-6/+56
This lets us implement PCI. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: send trap 13 through to userspace.Rusty Russell1-90/+43
We copy 7 bytes at eip for userspace's instruction decode; we have to carefully handle the case where eip is at the end of a page. We can't leave this to userspace since kernel has all the page table decode logic. The decode logic moves to userspace, basically unchanged. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add infrastructure to check mappings.Rusty Russell2-13/+30
We normally abort the guest unconditionally when it gives us a bad address, but in the next patch we want to copy some bytes which may not be mapped. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add infrastructure for userspace to deliver a trap to the guest.Rusty Russell1-0/+19
This is required for instruction emulation to move to userspace. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: write more information to userspace about pending traps.Rusty Russell4-12/+19
This is preparation for userspace handling MMIO and ioport accesses. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add operations to get/set a register from the Launcher.Rusty Russell4-0/+106
We use the ptrace API struct, and we currently don't let them set anything but the normal registers (we'd have to filter the others). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-04x86: Clean up cr4 manipulationAndy Lutomirski1-2/+3
CR4 manipulation was split, seemingly at random, between direct (write_cr4) and using a helper (set/clear_in_cr4). Unfortunately, the set_in_cr4 and clear_in_cr4 helpers also poke at the boot code, which only a small subset of users actually wanted. This patch replaces all cr4 access in functions that don't leave cr4 exactly the way they found it with new helpers cr4_set_bits, cr4_clear_bits, and cr4_set_bits_and_update_boot. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vince Weaver <vince@deater.net> Cc: "hillf.zj" <hillf.zj@alibaba-inc.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/495a10bdc9e67016b8fd3945700d46cfd5c12c2f.1414190806.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-09virtio: allow finalize_features to failMichael S. Tsirkin1-1/+3
This will make it easy for transports to validate features and return failure. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio: assert 32 bit features in transportsMichael S. Tsirkin1-0/+3
At this point, no transports set any of the high 32 feature bits. Since transports generally can't (yet) cope with such bits, add BUG_ON checks to make sure they are not set by mistake. Based on rproc patch by Rusty. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio: add support for 64 bit features.Michael S. Tsirkin1-1/+1
Change u32 to u64, and use BIT_ULL and 1ULL everywhere. Note: transports are unchanged, and only set low 32 bit. This guarantees that no transport sets e.g. VERSION_1 by mistake without proper support. Based on patch by Rusty. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio: use u32, not bitmap for featuresMichael S. Tsirkin1-4/+4
It seemed like a good idea to use bitmap for features in struct virtio_device, but it's actually a pain, and seems to become even more painful when we get more than 32 feature bits. Just change it to a u32 for now. Based on patch by Rusty. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-08-06mm/vmalloc.c: clean up map_vm_area third argumentWANG Chao1-5/+2
Currently map_vm_area() takes (struct page *** pages) as third argument, and after mapping, it moves (*pages) to point to (*pages + nr_mappped_pages). It looks like this kind of increment is useless to its caller these days. The callers don't care about the increments and actually they're trying to avoid this by passing another copy to map_vm_area(). The caller can always guarantee all the pages can be mapped into vm_area as specified in first argument and the caller only cares about whether map_vm_area() fails or not. This patch cleans up the pointer movement in map_vm_area() and updates its callers accordingly. Signed-off-by: WANG Chao <chaowang@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07drivers/lguest/page_tables.c: rename do_set_pte()Andrew Morton1-3/+3
"mm: introduce vm_ops->map_pages()" wants to export a do_set_pte() from core kernel. Rename lguest's do_set_pte() to something more lguest-specific. Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-07x86, asmlinkage, lguest: Pass in globals into assembler statementAndi Kleen1-2/+4
Tell the compiler that the inline assembler statement references lguest_entry. This fixes compile problems with LTO where the variable and the assembler code may end up in different files. Cc: x86@kernel.org Cc: rusty@rustcorp.com.au Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-10-29virtio_ring: change host notification APIHeinz Graalfs1-1/+2
Currently a host kick error is silently ignored and not reflected in the virtqueue of a particular virtio device. Changing the notify API for guest->host notification seems to be one prerequisite in order to be able to handle such errors in the context where the kick is triggered. This patch changes the notify API. The notify function must return a bool return value. It returns false if the host notification failed. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-09-06lguest: fix guest kernel stack overflow when TF bit set.Rusty Russell1-0/+10
The symptoms are that running gdb on a binary causes the guest to overflow the kernels stack (after some period of time), resulting in it finally being killed with a "Bad address" message. Reported-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-09-06lguest: fix BUG_ON() in invalid guest page table.Rusty Russell1-1/+3
If we discover the entry is invalid, we kill the guest, but we must avoid calling gpte_addr() on the invalid pmd, otherwise: kernel BUG at drivers/lguest/page_tables.c:157! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-06-25x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXEDH. Peter Anvin1-1/+1
Bit 1 in the x86 EFLAGS is always set. Name the macro something that actually tries to explain what it is all about, rather than being a tautology. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Gleb Natapov <gleb@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/n/tip-f10rx5vjjm6tfnt8o1wseb3v@git.kernel.org
2013-05-29lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in commentPaul Bolle1-1/+1
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-08lguest: clear cached last cpu when guest_set_pgd() called.Rusty Russell1-0/+1
commit v3.9-rc1-53-g6d0cda9 "lguest: cache last cpu we ran on." missed one case, which causes a triple fault. The guest calls guest_set_pgd() on the top page, and we carefully remap the Switcher text page. But we didn't reset last_host_cpu, so map_switcher_in_guest() thinks the guest's regs and IDT/GDT etc are already mapped. Reported-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-02Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds6-311/+347
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio & lguest updates from Rusty Russell: "Lots of virtio work which wasn't quite ready for last merge window. Plus I dived into lguest again, reworking the pagetable code so we can move the switcher page: our fixmaps sometimes take more than 2MB now..." Ugh. Annoying conflicts with the tcm_vhost -> vhost_scsi rename. Hopefully correctly resolved. * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits) caif_virtio: Remove bouncing email addresses lguest: improve code readability in lg_cpu_start. virtio-net: fill only rx queues which are being used lguest: map Switcher below fixmap. lguest: cache last cpu we ran on. lguest: map Switcher text whenever we allocate a new pagetable. lguest: don't share Switcher PTE pages between guests. lguest: expost switcher_pages array (as lg_switcher_pages). lguest: extract shadow PTE walking / allocating. lguest: make check_gpte et. al return bool. lguest: assume Switcher text is a single page. lguest: rename switcher_page to switcher_pages. lguest: remove RESERVE_MEM constant. lguest: check vaddr not pgd for Switcher protection. lguest: prepare to make SWITCHER_ADDR a variable. virtio: console: replace EMFILE with EBUSY for already-open port virtio-scsi: reset virtqueue affinity when doing cpu hotplug virtio-scsi: introduce multiqueue support virtio-scsi: push vq lock/unlock into virtscsi_vq_done virtio-scsi: pass struct virtio_scsi to virtqueue completion function ...
2013-04-29lguest: rename random32() to prandom_u32()Akinobu Mita1-1/+1
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30lguest: improve code readability in lg_cpu_start.Cosmin Paraschiv1-3/+3
Make the container_of call friendlier and fix some comment slip-ups. Signed-off-by: Cosmin Paraschiv <csmnprschv@gmail.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: map Switcher below fixmap.Rusty Russell1-10/+5
Now we've adjusted all the code, we can simply set switcher_addr to wherever it needs to go below the fixmaps, rather than asserting that it should be so. With large NR_CPUS and PAE, people were hitting the "mapping switcher would thwack fixmap" message. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: cache last cpu we ran on.Rusty Russell2-25/+54
This optimizes the frobbing of our Switcher map. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: map Switcher text whenever we allocate a new pagetable.Rusty Russell2-10/+33
It's always to same, so no need to put in the PTE every time we're about to run. Keep a flag to track whether the pagetable has the Switcher entries allocated, and when allocating always initialize the Switcher text PTE. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: don't share Switcher PTE pages between guests.Rusty Russell3-166/+107
We currently use the whole top PGD entry for the switcher, so we simply share a fixed page of PTEs between all guests (actually, it's one per Host CPU, to ensure isolation between guests). Changes to a scheme where every guest has its own mappings. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: expost switcher_pages array (as lg_switcher_pages).Rusty Russell2-12/+14
We will need this in page_table.c soon. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: extract shadow PTE walking / allocating.Rusty Russell1-69/+101
We want a separate find_pte() function so we can call it for populating the switcher PTE entries. We can also use it in page_writable(). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: make check_gpte et. al return bool.Rusty Russell1-10/+23
This is a bit neater: we can immediately return if a PTE/PGD/PMD entry is invalid (which also kills the guest). It means we don't risk using invalid entries as we reshuffle the code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: assume Switcher text is a single page.Rusty Russell4-18/+19
ie. SHARED_SWITCHER_PAGES == 1. It is well under a page, and it's a minor simplification: it's nice to have *one* simplification in a patch series! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: rename switcher_page to switcher_pages.Rusty Russell3-19/+19
There is a single page with the Switcher in it, but it's followed by 2 pages per Host CPU. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: remove RESERVE_MEM constant.Rusty Russell1-7/+11
We can use switcher_addr directly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: check vaddr not pgd for Switcher protection.Rusty Russell1-21/+16
We currently assume that the Switcher the top pgd; we want to remove this assumption, so check that vaddr is OK, rather then checking pgd index. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: prepare to make SWITCHER_ADDR a variable.Rusty Russell2-10/+12
We currently use the whole top PGD entry for the switcher, but that's hitting the fixmap in some configurations (mainly, large NR_CPUS). Introduce a variable, currently set to the constant. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-07lguest: fix paths in commentsWanlong Gao1-3/+2
After commit 07fe997, lguest tool has already moved from Documentation/virtual/lguest/ to tools/lguest/. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-02-26Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "All trivial, thanks to the stuff which didn't quite make it time" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_console: Initialize guest_connected=true for rproc_serial virtio: use module_virtio_driver. virtio: Add module driver macro for virtio drivers. virtio_console: Use virtio device index to generate port name virtio: make pci_device_id const virtio: make config_ops const virtio-mmio: fix wrong comment about register offset virtio_console: Let unconnected rproc device receive data.
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-11virtio: make config_ops constStephen Hemminger1-1/+1
It is just a table of function pointers, make it const for cleanliness and security reasons. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-18tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-1/+1
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11drivers/lguest: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au>