summaryrefslogtreecommitdiffstats
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2019-03-30leds: trigger: netdev: use memcpy in device_name_storeRasmus Villemoes1-1/+2
If userspace doesn't end the input with a newline (which can easily happen if the write happens from a C program that does write(fd, iface, strlen(iface))), we may end up including garbage from a previous, longer value in the device_name. For example # cat device_name # printf 'eth12' > device_name # cat device_name eth12 # printf 'eth3' > device_name # cat device_name eth32 I highly doubt anybody is relying on this behaviour, so switch to simply copying the bytes (we've already checked that size is < IFNAMSIZ) and unconditionally zero-terminate it; of course, we also still have to strip a trailing newline. This is also preparation for future patches. Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-30leds: pca9532: fix a potential NULL pointer dereferenceKangjie Lu1-2/+6
In case of_match_device cannot find a match, return -EINVAL to avoid NULL pointer dereference. Fixes: fa4191a609f2 ("leds: pca9532: Add device tree support") Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-26leds: trigger: netdev: fix refcnt leak on interface renameRafał Miłecki1-8/+5
Renaming a netdev-trigger-tracked interface was resulting in an unbalanced dev_hold(). Example: > iw phy phy0 interface add foo type __ap > echo netdev > trigger > echo foo > device_name > ip link set foo name bar > iw dev bar del [ 237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1 [ 247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1 [ 257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1 Above problem was caused by trigger checking a dev->name which obviously changes after renaming an interface. It meant missing all further events including the NETDEV_UNREGISTER which is required for calling dev_put(). This change fixes that by: 1) Comparing device struct *address* for notification-filtering purposes 2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change) Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-10Merge tag 'platform-drivers-x86-v5.1-1' of ↵Linus Torvalds1-0/+19
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: - use MODULE_DEVICE_TABLE across several wmi drivers, keeping wmi_device_id and MODULE_ALIAS() declarations in sync - add several Ideapad models to the no_hw_rfkill list - add support for new Mellanox platforms, including new fan and LED functionality - address Dell keyboard backlight change event and power button release issues - update dell_rbu to use appropriate memory allocation mechanisms - several small fixes and Ice Lake support for intel_pmc_core - fix a suspend regression for Cherry Trail based devices in intel_int0002_vgpio - a few other routine fixes * tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits) MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list platform/x86: mlx-platform: Fix access mode for fan_dir attribute platform/x86: mlx-platform: Add UID LED for the next generation systems platform/x86: mlx-platform: Add extra CPLD for next generation systems platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE() platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h modpost: file2alias: define size of alias platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown platform/x86: intel_pmc_core: Add Package cstates residency info platform/x86: intel_pmc_core: Add ICL platform support ...
2019-03-04Merge tag 'leds-for-5.1-rc1' of ↵Linus Torvalds5-23/+182
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - finalize previously announced support for initialization of pattern triggers from Device Tree - fix for null deref on firmware load failure in leds-lp55xx-common.c * tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: lp55xx: fix null deref on firmware load failure leds: trigger: timer: Add initialization from Device Tree leds: trigger: oneshot: Add initialization from Device Tree leds: trigger: pattern: Add pattern initialization from Device Tree leds: Add helper for getting default pattern from Device Tree dt-bindings: leds: Add pattern initialization from Device Tree
2019-02-23leds: mlxreg: Add support for capability registerVadim Pasternak1-0/+19
Add support for capability register in order to distinct between the systems with minor LED configuration differences. It reduces the amount of code describing systems' LED configuration. For example one system can be equipped with six LED, while the other with only four. Reading this information from the capability registers allows to use the same LED structure for such systems and set the relevant configuration dynamically based on capability register content. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-14leds: lp55xx: fix null deref on firmware load failureMichal Kazior1-2/+2
I've stumbled upon a kernel crash and the logs pointed me towards the lp5562 driver: > <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2 > <4>[306013.894990] lp5562 0-0030: Falling back to user helper > ... > <3>[306073.924886] lp5562 0-0030: firmware request failed > <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000 > <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58 > <4>[306074.255539] LR is at release_firmware+0x6c/0x138 > ... After taking a look I noticed firmware_release() could be called with either NULL or a dangling pointer. Fixes: 10c06d178df11 ("leds-lp55xx: support firmware interface") Signed-off-by: Michal Kazior <michal@plume.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-17leds: lp5523: fix a missing check of return value of lp55xx_readKangjie Lu1-1/+3
When lp55xx_read() fails, "status" is an uninitialized variable and thus may contain random value; using it leads to undefined behaviors. The fix inserts a check for the return value of lp55xx_read: if it fails, returns with its error code. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16leds: trigger: timer: Add initialization from Device TreeKrzysztof Kozlowski1-0/+34
Allow initialization of delays used in timer trigger from Device Tree property. This is especially useful for embedded systems where the trigger might be used early, before bringing up user-space. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16leds: trigger: oneshot: Add initialization from Device TreeKrzysztof Kozlowski1-2/+36
Allow initialization of delays used in oneshot trigger from Device Tree property. This is especially useful for embedded systems where the trigger might be used early, before bringing up user-space. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16leds: trigger: pattern: Add pattern initialization from Device TreeKrzysztof Kozlowski1-19/+80
Allow initialization of pattern used in pattern trigger from Device Tree property. This is especially useful for embedded systems where the pattern trigger would be used to indicate the process of boot status in a nice, user-friendly blinking way. This initialization pattern will be used till user-space is brought up and sets its own pattern, indicating the boot status is for example finished. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16leds: Add helper for getting default pattern from Device TreeKrzysztof Kozlowski1-0/+30
Multiple LED triggers might need to access default pattern so add a helper for that. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-25Merge tag 'leds-for-4.21-rc1' of ↵Linus Torvalds5-27/+19
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "There are several few-liners, where most of them are fixes and improvments. One thing standing out is ground preparation for inititializing trigger parameters via Device Tree. We introduce LED_INIT_DEFAULT_TRIGGER flag for that purpose and set it when default trigger is matched. It indicates that trigger should parse DT properties to retrieve the initialization data when set as default one" * tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought after class led: triggers: Add LED_INIT_DEFAULT_TRIGGER flag led: triggers: Break the for loop after default trigger is found leds: pwm: Use OF variant of LED registering function leds: pwm: Simplify with resource-managed devm_led_classdev_register() leds: gpio: Drop unneeded manual of_node assignment leds: 88pm860x: Use of_node_name_eq for node name comparisons leds: powernv: add of_node_put()
2018-12-10led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought ↵Krzysztof Kozlowski1-1/+3
after class Trigger driver can be initialized after the LED class device driver. In such case led_trigger_set_default() won't be called and flag LED_INIT_DEFAULT_TRIGGER should be set from led_trigger_register(). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-10led: triggers: Add LED_INIT_DEFAULT_TRIGGER flagJacek Anaszewski1-0/+1
Add the flag LED_INIT_DEFAULT_TRIGGER for indicating that trigger being set is a default trigger for the LED class device, and thus it should be initialized with settings provided in the fwnode. Set the flag in the led_trigger_set_default(). It is expected to be cleared in the activate() op of a trigger after trigger fwnode initialization data is parsed and applied. This should happen only once after LED class device registration, to allow leaving triggers in the idle state on re-apply and let the users apply their own settings without interference from the default ones. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-10led: triggers: Break the for loop after default trigger is foundJacek Anaszewski1-1/+3
It is of no avail to continue iterating through registered triggers in the led_trigger_set_default() after the trigger to set has been found. Add "break" statement to fix this omission. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-08leds: pwm: Use OF variant of LED registering functionKrzysztof Kozlowski1-1/+1
The PWM leds can be instantiated from Device Tree so pass the respective device node to LED core. This provides the LED system with proper device node and exposes it through uevent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-08leds: pwm: Simplify with resource-managed devm_led_classdev_register()Krzysztof Kozlowski1-20/+2
Simplify the exit path with resource-managed version of registering LED class device. The code should be functionally the same, except that on device removal the led_pwm_priv->num_leds is not decremented to zero (which should not have any effect as device is going away). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-08leds: gpio: Drop unneeded manual of_node assignmentKrzysztof Kozlowski1-1/+0
This reverts the main change of commit bff23714bc36 ("leds: leds-gpio: Set of_node for created LED devices") because of_node assignment is handled by core since commit 7ea79ae86c28 ("leds: gpio: use OF variant of LED registering function"). Basically the code was overwriting the of_node with same value. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-06leds: 88pm860x: Use of_node_name_eq for node name comparisonsRob Herring1-1/+1
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which this is. Cc: linux-leds@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-11-28leds: trigger: Introduce audio mute LED triggerTakashi Iwai3-0/+52
This patch adds a new LED trigger for coupling the audio mixer change with the LED on laptops or other devices. Currently there are two trigger types, "audio-mute" and "audio-micmute". The audio driver triggers the LED brightness change via ledtrig_audio_set() call with the proper type (either mute or mic-mute). OTOH, the consumers may call ledtrig_audio_get() for the initial brightness value that may have been set by the audio driver beforehand. This new stuff will be used by HD-audio codec driver and some platform drivers (thinkpad_acpi and dell-laptop, also upcoming huawei-wmi). Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-21leds: powernv: add of_node_put()Yangtao Li1-3/+9
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. powernv_led_probe() doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-11-08Merge tag 'led-fixes-for-4.20-rc2' of ↵Linus Torvalds1-19/+8
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: "All three fixes are related to the newly added pattern trigger: - remove mutex_lock() from timer callback, which would trigger problems related to sleeping in atomic context, the removal is harmless since mutex protection turned out to be redundant in this case - fix pattern parsing to properly handle intervals with brightness == 0 - fix typos in the ABI documentation" * tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: Documentation: ABI: led-trigger-pattern: Fix typos leds: trigger: Fix sleeping function called from invalid context Fix pattern handling optimalization
2018-11-07leds: trigger: Fix sleeping function called from invalid contextBaolin Wang1-16/+4
We will meet below issue due to mutex_lock() is called in interrupt context. The mutex lock is used to protect the pattern trigger data, but before changing new pattern trigger data (pattern values or repeat value) by users, we always cancel the timer firstly to clear previous patterns' performance. That means there is no race in pattern_trig_timer_function(), so we can drop the mutex lock in pattern_trig_timer_function() to avoid this issue. Moreover we can move the timer cancelling into mutex protection, since there is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function(). BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) [<c020f19c>] (unwind_backtrace) from [<c020aecc>] (show_stack+0x10/0x14) [<c020aecc>] (show_stack) from [<c07affb8>] (dump_stack+0x7c/0x9c) [<c07affb8>] (dump_stack) from [<c02417d4>] (___might_sleep+0xf4/0x158) [<c02417d4>] (___might_sleep) from [<c07c92c4>] (mutex_lock+0x18/0x60) [<c07c92c4>] (mutex_lock) from [<c067b28c>] (pattern_trig_timer_function+0x1c/0x11c) [<c067b28c>] (pattern_trig_timer_function) from [<c027f6fc>] (call_timer_fn+0x1c/0x90) [<c027f6fc>] (call_timer_fn) from [<c027f944>] (expire_timers+0x94/0xa4) [<c027f944>] (expire_timers) from [<c027fc98>] (run_timer_softirq+0x108/0x15c) [<c027fc98>] (run_timer_softirq) from [<c02021cc>] (__do_softirq+0x1d4/0x258) [<c02021cc>] (__do_softirq) from [<c0224d24>] (irq_exit+0x64/0xc4) [<c0224d24>] (irq_exit) from [<c0268dd0>] (__handle_domain_irq+0x80/0xb4) [<c0268dd0>] (__handle_domain_irq) from [<c045e1b0>] (gic_handle_irq+0x58/0x90) [<c045e1b0>] (gic_handle_irq) from [<c02019f8>] (__irq_svc+0x58/0x74) Exception stack(0xeb483f60 to 0xeb483fa8) 3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408 3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98 3fa0: 60020013 ffffffff [<c02019f8>] (__irq_svc) from [<c0207e98>] (arch_cpu_idle+0x1c/0x38) [<c0207e98>] (arch_cpu_idle) from [<c0247ca8>] (do_idle+0x138/0x268) [<c0247ca8>] (do_idle) from [<c0248050>] (cpu_startup_entry+0x18/0x1c) [<c0248050>] (cpu_startup_entry) from [<402022ec>] (0x402022ec) Fixes: 5fd752b6b3a2 ("leds: core: Introduce LED pattern trigger") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-26leds: gpio: set led_dat->gpiod pointer for OF defined GPIO ledsLiviu Dudau1-0/+2
Commit 45d4c6de4e49 ("leds: gpio: Try to lookup gpiod from device") removed the common code path that set the led_dat->gpiod pointer in create_gpio_led(), but only added it back for the devices that have a valid gpio_led_platform_data structure. Calling gpio_leds_create() in gpio_led_probe() is not enough to get a valid gpiod pointer. Fortunately enough, gpio_leds_create() already gets the needed pointer, we just need to assign it to the relevant gpio_led_data structure. Fixes: 45d4c6de4e49 ("leds: gpio: Try to lookup gpiod from device") Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-25Fix pattern handling optimalizationPavel Machek1-3/+4
Check for zero duration before skipping step. This fixes pattern echo "0 1000 10 2550 0 1000" > pattern which should do [ .-xXx-.] but does [ Xx-.] Signed-off-by: Pavel Machek <pavel@ucw.cz> Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11leds: sc27xx: Add pattern_set/clear interfaces for LED controllerBaolin Wang1-0/+121
This patch implements the 'pattern_set'and 'pattern_clear' interfaces to support SC27XX LED breathing mode. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.c> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11leds: core: Introduce LED pattern triggerBaolin Wang3-0/+419
This patch adds a new LED trigger that LED device can configure to employ software or hardware pattern engine. Consumers can write 'pattern' file to enable the software pattern which alters the brightness for the specified duration with one software timer. Moreover consumers can write 'hw_pattern' file to enable the hardware pattern for some LED controllers which can autonomously control brightness over time, according to some preprogrammed hardware patterns. Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-10leds: add Panasonic AN30259A supportSimon Shields3-0/+379
AN30259A is a 3-channel LED driver which uses I2C. It supports timed operation via an internal PWM clock, and variable brightness. This driver offers support for basic hardware-based blinking and brightness control. The datasheet is freely available: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf Signed-off-by: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-10leds: gpio: Try to lookup gpiod from deviceLinus Walleij1-30/+62
This augments the GPIO lookup code in the GPIO LEDs to attempt to look up a GPIO descriptor from the device with index. This makes it possible to use GPIO machine look-up tables and stop passing global GPIO numbers through platform data. Using this we can stepwise convert existing board files to use machine descriptor tables and then eventually drop the legacy GPIO support and only include <linux/gpio/consumer.h> and use descriptors exclusively. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-08leds: pwm: silently error out on EPROBE_DEFERJerome Brunet1-2/+3
When probing, if we fail to get the pwm due to probe deferal, we shouldn't print an error message. Just be silent in this case. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-08-28leds: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-leds@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-08-06leds: ns2: Change unsigned to unsigned intKitone Elvis Peter1-2/+2
Use unsigned int, because it's preferred to unsigned. Signed-off-by: Kitone Elvis Peter <elviskitone@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: gpio trigger: simplifications from core changesUwe Kleine-König1-62/+25
The trigger core learned error handling for the activate callback and to handle device attributes. Also make use of the module_led_trigger() helper to simplify trigger registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: backlight trigger: simplifications from core changesUwe Kleine-König1-43/+19
Use the new module_led_trigger() helper. Also use attribute support from the trigger core. Drop error message on allocation failure as kzalloc() already screams loudly when failing. Use wrappers to get and set trigger data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: activity trigger: simplifications from core changesUwe Kleine-König1-22/+16
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and the accessor function to get and set trigger_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: default-on trigger: make use of module_led_trigger()Uwe Kleine-König1-13/+1
This removes some boilerplate from the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: heartbeat trigger: simplifications from core changesUwe Kleine-König1-22/+19
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and the accessor function to get and set trigger_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: oneshot trigger: simplifications from core changesUwe Kleine-König1-63/+26
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and do some minor coding style improvements. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: transient trigger: simplifications from core changesUwe Kleine-König1-68/+30
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: timer trigger: simplifications from core changesUwe Kleine-König1-40/+13
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .trigger_data being non-NULL can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: netdev trigger: simplifications from core changesUwe Kleine-König1-68/+31
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for trigger_data being non-NULL can go away. (It was broken before because the core didn't clear .trigger_data, so it might have been non-NULL even if .activate() failed before.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: handle .trigger_data and .activated() in the coreUwe Kleine-König1-0/+3
This helps keeping these two fields consistent and drivers don't need to care for this themselves any more. Note that .activated isn't set to true automatically because that might confuse some triggers when deactivating (e.g. ledtrig-gpio). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: add device attribute supportUwe Kleine-König1-0/+12
As many triggers use device attributes, add support for these in led_trigger_set which allows simplifying the drivers accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: let struct led_trigger::activate() return an error codeUwe Kleine-König10-28/+63
Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: make the MODULE_LICENSE string match the actual licenseUwe Kleine-König6-12/+8
These files are licensed under GPL version 2 only. So use "GPL v2" instead of "GPL" (which means v2 or later). Also remove an empty (but commented) line at the end of the license header which nicely proves in the context that the drivers are really v2 only :-) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lm3692x: Support LED sync configurationDan Murphy1-38/+120
The LM36922 has one output but can sync current to 2 LED strings. The user may only use one sync so the other syncs need to be disabled. The LM36923 has 3 LED syncs. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lm3692x: Change DT calls to fwnode callsDan Murphy1-17/+21
Update the code to use the fwnode calls as opposed to ARM DT node api's. This allows the device to be used with either DT configurations or ACPI definitions. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lm3692x: Update license header to SPDXDan Murphy1-14/+3
Update the license header to the current SPDX licensing format. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: max8997: use mode when calling max8997_led_set_modeColin Ian King1-1/+1
Variable mode is assigned to pdata->led_pdata->mode[led->id] and yet is not being used when calling function max8997_led_set_mode. Fix this by using mode when calling max8997_led_set_mode. Cleans up clang warning: warning: variable 'mode' set but not used [-Wunused-but-set-variable] Fixes: 8584cb82f151 ("leds: Add suuport for MAX8997-LED driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 22:29:51 +0000