summaryrefslogtreecommitdiffstats
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2015-02-02leds: leds-gpio: Pass on error codes unmodifiedSoren Brinkmann1-1/+2
Instead of overriding error codes, pass them on unmodified. This way a EPROBE_DEFER is correctly passed to the driver core. This results in the LED driver correctly requesting probe deferral in cases the GPIO controller is not yet available. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reported-and-tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-01-26leds: Add LED Flash class extension to the LED subsystemJacek Anaszewski4-0/+501
Some LED devices support two operation modes - torch and flash. This patch provides support for flash LED devices in the LED subsystem by introducing new sysfs attributes and kernel internal interface. The attributes being introduced are: flash_brightness, flash_strobe, flash_timeout, max_flash_timeout, max_flash_brightness, flash_fault, flash_sync_strobe and available_sync_leds. All the flash related features are placed in a separate module. The modifications aim to be compatible with V4L2 framework requirements related to the flash devices management. The design assumes that V4L2 sub-device can take of the LED class device control and communicate with it through the kernel internal interface. When V4L2 Flash sub-device file is opened, the LED class device sysfs interface is made unavailable. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-01-14leds: leds-mc13783: Use of_get_child_by_name() instead of refcount hackGeert Uytterhoeven1-3/+1
of_find_node_by_name() calls of_node_put() on its "from" parameter. To counter this, mc13xxx_led_probe_dt() calls of_node_get() first. Use of_get_child_by_name() instead to get rid of the refcount hack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-leds@vger.kernel.org Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-01-14leds: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-01-14leds: Don't allow brightness values greater than max_brightnessGabriele Mazzotta1-1/+2
Since commit 4d71a4a12b13 ("leds: Add support for setting brightness in a synchronous way") the value passed to brightness_set() is no longer limited to max_brightness and can be different from the internally saved brightness value. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-01-13leds: netxbig: fix oops at probe timeSimon Guinot1-6/+6
This patch fixes a NULL pointer dereference on led_dat->mode_val. Due to this bug, a kernel oops can be observed at probe time on the LaCie 2Big and 5Big v2 boards: Unable to handle kernel NULL pointer dereference at virtual address 00000008 [...] [<c03f244c>] (netxbig_led_probe) from [<c02c8c6c>] (platform_drv_probe+0x4c/0x9c) [<c02c8c6c>] (platform_drv_probe) from [<c02c72d0>] (driver_probe_device+0x98/0x25c) [<c02c72d0>] (driver_probe_device) from [<c02c7520>] (__driver_attach+0x8c/0x90) [<c02c7520>] (__driver_attach) from [<c02c5c24>] (bus_for_each_dev+0x68/0x94) [<c02c5c24>] (bus_for_each_dev) from [<c02c6408>] (bus_add_driver+0x124/0x1dc) [<c02c6408>] (bus_add_driver) from [<c02c7ac0>] (driver_register+0x78/0xf8) [<c02c7ac0>] (driver_register) from [<c000888c>] (do_one_initcall+0x80/0x1cc) [<c000888c>] (do_one_initcall) from [<c0733618>] (kernel_init_freeable+0xe4/0x1b4) [<c0733618>] (kernel_init_freeable) from [<c058db9c>] (kernel_init+0xc/0xec) [<c058db9c>] (kernel_init) from [<c0009850>] (ret_from_fork+0x14/0x24) [...] This bug was introduced by commit 588a6a99286ae30afb1339d8bc2163517b1b7dd1 ("leds: netxbig: fix attribute-creation race"). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-12-18Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
2014-12-15Merge branch 'for-next' of ↵Linus Torvalds15-80/+645
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu: "We got some cleanup and driver for LP8860 as well as some patches for LED Flash Class" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp8860: Fix module dependency leds: lp8860: Introduce TI lp8860 4 channel LED driver leds: Add support for setting brightness in a synchronous way leds: implement sysfs interface locking mechanism leds: syscon: handle multiple syscon instances leds: delete copy/paste mistake leds: regulator: Convert to devm_regulator_get_exclusive
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds28-29/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-10leds: leds-gpio: Fix the "default-state" property checkFabio Estevam1-1/+1
Commit a43f2cbbb009f9 ("leds: leds-gpio: Make use of device property API") caused a regression by reading the incorrect string for the "default-state" property. Fix the property string check to restore the original behaviour. Fixes: a43f2cbbb009 (leds: leds-gpio: Make use of device property API) Reported-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04leds: leds-gpio: Fix multiple instances registration without 'label' propertyFabio Estevam1-1/+11
Since commit a43f2cbbb009f96 ("leds: leds-gpio: Make use of device property API") it is no longer possible to register multiple gpio leds without passing the 'label' property. According to Documentation/devicetree/bindings/leds/common.txt: "Optional properties for child nodes: - label : The label for this LED. If omitted, the label is taken from the node name (excluding the unit address)." So retrieve the node name when the 'label' property is absent to keep the old behaviour and fix this regression. Fixes: a43f2cbbb009 (leds: leds-gpio: Make use of device property API) Reported-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Grant Likely <grant.likely@linaro.org> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-01leds: lp8860: Fix module dependencyAxel Lin1-1/+2
The driver should select REGMAP_I2C rather than depend on it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-11-19leds: lp8860: Introduce TI lp8860 4 channel LED driverDan Murphy3-0/+502
Introduce the Texas Instruments lp8860 4 channel LED driver. This driver configures the device in display cluster mode as this seems to be the most used configuration at the time of the driver configuration. For more product information please see the link below: http://www.ti.com/product/lp8860-q1 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-11-14leds: Add support for setting brightness in a synchronous wayJacek Anaszewski9-26/+54
There are use cases when setting a LED brightness has to have immediate effect (e.g. setting a torch LED brightness). This patch extends LED subsystem to support such operations. The LED subsystem internal API __led_set_brightness is changed to led_set_brightness_async and new led_set_brightness_sync API is added. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-11-14leds: implement sysfs interface locking mechanismJacek Anaszewski3-6/+47
Add a mechanism for locking LED subsystem sysfs interface. This patch prepares ground for addition of LED Flash Class extension, whose API will be integrated with V4L2 Flash API. Such a fusion enforces introducing a locking scheme, which will secure consistent access to the LED Flash Class device. The mechanism being introduced allows for disabling LED subsystem sysfs interface by calling led_sysfs_disable function and enabling it by calling led_sysfs_enable. The functions alter the LED_SYSFS_DISABLE flag state and must be called under mutex lock. The state of the lock is checked with use of led_sysfs_is_disabled function. Such a design allows for providing immediate feedback to the user space on whether the LED Flash Class device is available or is under V4L2 Flash sub-device control. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-11-14leds: syscon: handle multiple syscon instancesLinus Walleij1-31/+36
Currently the syscon LED driver will only handle LEDs on the first syscon found in the system. But there can be several of them, so augment the driver to traverse all syscon nodes and check for syscon LEDs on them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-11-14leds: delete copy/paste mistakeLinus Walleij1-4/+0
A chunk of text followed the copied license text, ehm, sorry that kind of things happen from time to time. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-11-14leds: regulator: Convert to devm_regulator_get_exclusiveAxel Lin1-13/+5
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-11-06leds: leds-gpio: Fix legacy GPIO number caseGeert Uytterhoeven1-3/+3
In the legacy case, led_dat->gpiod is initialized correctly, but overwritten later by template->gpiod, which is NULL, causing leds-gpio to fail with: gpiod_direction_output: invalid GPIO leds-gpio: probe of leds-gpio failed with error -22 Move the initialization of led_dat->gpiod from template->gpiod up, and always use led_dat->gpiod later, to fix this. Fixes: 5c51277a9ababfa4 (leds: leds-gpio: Add support for GPIO descriptors) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptorsMika Westerberg1-18/+13
Commit 21f2aae91e902aad ("leds: leds-gpio: Add support for GPIO descriptors") already converted most of the driver to use GPIO descriptors. What is still missing is the platform specific hook gpio_blink_set() and board files which pass legacy GPIO numbers to this driver in platform data. In this patch we handle the former and convert gpio_blink_set() to take GPIO descriptor instead. In order to do this we convert the existing four users to accept GPIO descriptor and translate it to legacy GPIO number in the platform code. This effectively "pushes" legacy GPIO number usage from the driver to platforms. Also add comment to the remaining block describing that it is legacy code path and we are getting rid of it eventually. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04leds: leds-gpio: Make use of device property APIRafael J. Wysocki1-37/+26
Make use of device property API in this driver so that both OF and ACPI based system can use the same driver. This change contains material from Max Eliaser and Mika Westerberg. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bryan Wu <cooloney@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04leds: leds-gpio: Add support for GPIO descriptorsMika Westerberg1-35/+45
GPIO descriptors are the preferred way over legacy GPIO numbers nowadays. Convert the driver to use GPIO descriptors internally but still allow passing legacy GPIO numbers from platform data to support existing platforms. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Bryan Wu <cooloney@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman28-29/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-21Merge branch 'for-next' of ↵Linus Torvalds6-26/+40
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED update from Bryan Wu: "Basically we have some bug fixing and clean up and one big thing is we start to merge patch to add support LED Flash class" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: gpio: cleanup the leds-gpio driver led: gpio: Fix possible ZERO_SIZE_PTR pointer dereferencing error. led: gpio: Sort include headers alphabetically leds: Improve and export led_update_brightness leds: trigger: gpio: fix warning in gpio trigger for gpios whose accessor function may sleep leds: lp3944: fix sparse warning leds: avoid using DEVICE_ATTR macro for max_brightness attribute leds: make brightness type consistent across whole subsystem leds: Reorder include directives
2014-10-20leds: drop owner assignment from platform_driversWolfram Sang28-29/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-10Merge tag 'hwmon-for-linus-v3.18' of ↵Linus Torvalds3-0/+141
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for menf21bmc. - convert k10temp, smsc47b397, da9052, da9055 to new hwmon API. - register ntc_thermistor driver with thermal subsystem. - add support for F15h M60h to k10temp driver. - add driver for MEN14F021P00 BMC HWMON driver; this required a merge with tag mfd-hwmon-leds-watchdog-v3.18 * tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ab8500) Call kernel_power_off instead of pm_power_off hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driver hwmon: (ntc_thermistor) Add ntc thermistor to thermal subsystem as a sensor. hwmon: (smsc47b397) Convert to devm_hwmon_device_register_with_groups MAINTAINERS: add entry for the PWM fan driver hwmon: (k10temp) Convert to devm_hwmon_device_register_with_groups hwmon: (k10temp) Add support for F15h M60h hwmon: (da9052) Convert to devm_hwmon_device_register_with_groups hwmon: (da9055) Convert to devm_hwmon_device_register_with_groups hwmon: (ads1015) Use of_property_read_u32 at appropriate places
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds2-13/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-08Merge tag 'drivers-for-linus' of ↵Linus Torvalds3-0/+177
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-10-08Merge tag 'fixes-nc-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "These are bug fixes for harmless problems that were not important enough to get fixed in 3.17. The majority of these are OMAP specific, but there are also a couple for Marvell mvebu, cns3xxx, and others, as well as some updates for the MAINTAINERS file. In particular, Robert Jarzmik and Daniel Mack now volunteered to help out maintaining the PXA platform, Krzysztof Halasa took over the cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic meson platform, and Matthias Brugger is now listed for the mediatek platform he recently contributed" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) MAINTAINERS: update Shawn's email address MAINTAINERS: condense some Tegra related entries MAINTAINERS: add Alexandre Courbot for Tegra MAINTAINERS: CNS3xxx and IXP4xx update. MAINTAINERS: Add maintainers entry for Mediatek SoCs arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500 MAINTAINERS: add a third maintainer to mach-bcm CNS3xxx: Fix PCIe read size limit. CNS3xxx: Fix logical PCIe topology. CNS3xxx: Fix debug UART. MAINTAINERS: Add entry for the Amlogic MesonX SoCs MAINTAINERS: update ARM pxa maintainers ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings ARM: mvebu: Netgear RN102: Use Hardware BCH ECC ARM: Kirkwood: Fix DT based DSA. ARM: OMAP2+: make of_device_ids const ARM: omap2: make arrays containing machine compatible strings const ARM: LPC32xx: Fix reset function ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC ...
2014-09-29leds: gpio: cleanup the leds-gpio driverXiubo Li1-3/+1
Remove stray blank line and space. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-29led: gpio: Fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li1-0/+3
Since we cannot make sure the 'pdata->num_leds' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-29led: gpio: Sort include headers alphabeticallyXiubo Li2-6/+6
If the inlcude headers aren't sorted alphabetically, then the logical choice is to append new ones, however that creates a lot of potential for conflicts or duplicates because every change will then add new includes in the same location. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-26leds: add a driver for syscon-based LEDsLinus Walleij3-0/+177
This makes it possible to create a set of LEDs from a syscon MFD instance, which is lean mean and clean on the ARM reference designs and can replace the Versatile LEDs driver in the long run, as well as other custom syscon LEDs drivers. Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> [Fixed cocinelle warnings] Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-24Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into develBryan Wu3-0/+141
Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
2014-09-24Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into hwmon-nextGuenter Roeck3-0/+141
Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
2014-09-24leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driverAndreas Werner3-0/+141
Added driver to support the 14F021P00 BMC LEDs. The BMC is a Board Management Controller including four LEDs which can be switched on and off. Signed-off-by: Andreas Werner <andreas.werner@men.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe2-13/+4
this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Michael Büsch <m@bues.ch> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-12leds: Improve and export led_update_brightnessJacek Anaszewski2-6/+16
led_update_brightness helper function used to be exploited only locally in the led-class.c module, where its result was being passed to the brightness_show sysfs callback. With the introduction of v4l2-flash subdevice the same functionality becomes required for reading current brightness from a LED device. This patch adds checking of return value of the brightness_get callback and moves the led_update_brightness() function to the LED subsystem public API. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: trigger: gpio: fix warning in gpio trigger for gpios whose accessor ↵Lothar Waßmann1-1/+1
function may sleep When using a GPIO driver whose accessor functions may sleep (e.g. an I2C GPIO extender like PCA9554) the following warning is issued: WARNING: CPU: 0 PID: 665 at drivers/gpio/gpiolib.c:2274 gpiod_get_raw_value+0x3c/0x48() Modules linked in: CPU: 0 PID: 665 Comm: kworker/0:2 Not tainted 3.16.0-karo+ #115 Workqueue: events gpio_trig_work [<c00142cc>] (unwind_backtrace) from [<c00118f8>] (show_stack+0x10/0x14) [<c00118f8>] (show_stack) from [<c001bf10>] (warn_slowpath_common+0x64/0x84) [<c001bf10>] (warn_slowpath_common) from [<c001bf4c>] (warn_slowpath_null+0x1c/0x24) [<c001bf4c>] (warn_slowpath_null) from [<c020a1b8>] (gpiod_get_raw_value+0x3c/0x48) [<c020a1b8>] (gpiod_get_raw_value) from [<c02f68a0>] (gpio_trig_work+0x1c/0xb0) [<c02f68a0>] (gpio_trig_work) from [<c0030c1c>] (process_one_work+0x144/0x38c) [<c0030c1c>] (process_one_work) from [<c0030ef8>] (worker_thread+0x60/0x5cc) [<c0030ef8>] (worker_thread) from [<c0036dd4>] (kthread+0xb4/0xd0) [<c0036dd4>] (kthread) from [<c000f0f0>] (ret_from_fork+0x14/0x24) ---[ end trace cd51a1dad8b86c9c ]--- Fix this by using the _cansleep() variant of gpio_get_value(). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: lp3944: fix sparse warningJacek Anaszewski1-1/+2
Fix sparse warning appeared after changing brightness type in the leds.h from int to enum led_brightness. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: avoid using DEVICE_ATTR macro for max_brightness attributeJacek Anaszewski1-2/+2
Make definition of the brightness related sysfs attributes consistent. The modification entails change of the function name: led_max_brightness_show -> max_brightness_show Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: Reorder include directivesJacek Anaszewski2-7/+9
Reorder include directives so that they are arranged in alphabetical order. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-09leds: Remove ARCH_KIRKWOOD dependencyAndrew Lunn1-2/+2
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Use MACH_KIRKWOOD which will be set when kirkwood is built as part of mach-mvebu. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Link: https://lkml.kernel.org/r/1409417172-6846-5-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-02Revert "leds: convert blink timer to workqueue"Jiri Kosina2-13/+12
This reverts commit 8b37e1bef5a6b60e949e28a4db3006e4b00bd758. It's broken as it changes led_blink_set() in a way that it can now sleep (while synchronously waiting for workqueue to be cancelled). That's a problem, because it's possible that this function gets called from atomic context (tpt_trig_timer() takes a readlock and thus disables preemption). This has been brought up 3 weeks ago already [1] but no proper fix has materialized, and I keep seeing the problem since 3.17-rc1. [1] https://lkml.org/lkml/2014/8/16/128 BUG: sleeping function called from invalid context at kernel/workqueue.c:2650 in_atomic(): 1, irqs_disabled(): 0, pid: 2335, name: wpa_supplicant 5 locks held by wpa_supplicant/2335: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff814c7c92>] rtnl_lock+0x12/0x20 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffffc06e649c>] cfg80211_mgd_wext_siwessid+0x5c/0x180 [cfg80211] #2: (&local->mtx){+.+.+.}, at: [<ffffffffc0817dea>] ieee80211_prep_connection+0x17a/0x9a0 [mac80211] #3: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffc08081ed>] ieee80211_vif_use_channel+0x5d/0x2a0 [mac80211] #4: (&trig->leddev_list_lock){.+.+..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211] CPU: 0 PID: 2335 Comm: wpa_supplicant Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffff8800360b5a50 ffff8800751f76d8 ffffffff8159e97f ffff8800360b5a30 ffff8800751f76e8 ffffffff810739a5 ffff8800751f77b0 ffffffff8106862f ffffffff810685d0 0aa2209200000000 ffff880000000004 ffff8800361c59d0 Call Trace: [<ffffffff8159e97f>] dump_stack+0x4d/0x66 [<ffffffff810739a5>] __might_sleep+0xe5/0x120 [<ffffffff8106862f>] flush_work+0x5f/0x270 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90 [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211] [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211] [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [<ffffffffc06e36c0>] ? cfg80211_wext_giwessid+0x50/0x50 [cfg80211] [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0 [<ffffffff81584fa0>] ? ioctl_standard_iw_point+0x3e0/0x3e0 [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100 [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0 [<ffffffff814cfb29>] dev_ioctl+0x329/0x620 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0 [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520 [<ffffffff815a67fb>] ? sysret_check+0x1b/0x56 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0 [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f wlan0: send auth to 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: authenticated wlan0: associate with 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: RX AssocResp from 00:0b:6b:3c:8c:e4 (capab=0x431 status=0 aid=2) wlan0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: NA wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:0b:6b:3c:8c:e4 ================================= [ INFO: inconsistent lock state ] 3.17.0-rc3 #1 Not tainted --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ((&(&led_cdev->blink_work)->work)){+.?...}, at: [<ffffffff810685d0>] flush_work+0x0/0x270 {SOFTIRQ-ON-W} state was registered at: [<ffffffff81094dbe>] __lock_acquire+0x30e/0x1a30 [<ffffffff81096c81>] lock_acquire+0x91/0x110 [<ffffffff81068608>] flush_work+0x38/0x270 [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211] [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211] [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0 [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0 [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100 [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0 [<ffffffff814cfb29>] dev_ioctl+0x329/0x620 [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0 [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520 [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0 [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f irq event stamp: 493416 hardirqs last enabled at (493416): [<ffffffff81068a5f>] __cancel_work_timer+0x6f/0x100 hardirqs last disabled at (493415): [<ffffffff81067e9f>] try_to_grab_pending+0x1f/0x160 softirqs last enabled at (493408): [<ffffffff81053ced>] _local_bh_enable+0x1d/0x50 softirqs last disabled at (493409): [<ffffffff81054c75>] irq_exit+0xa5/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((&(&led_cdev->blink_work)->work)); <Interrupt> lock((&(&led_cdev->blink_work)->work)); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: (((&tpt_trig->timer))){+.-...}, at: [<ffffffff810b4c50>] call_timer_fn+0x0/0x180 #1: (&trig->leddev_list_lock){.+.?..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffffffff8246eb30 ffff88007c203b00 ffffffff8159e97f ffffffff81a194c0 ffff88007c203b50 ffffffff81599c29 0000000000000001 ffffffff00000001 ffff880000000000 0000000000000006 ffffffff81a194c0 ffffffff81093ad0 Call Trace: <IRQ> [<ffffffff8159e97f>] dump_stack+0x4d/0x66 [<ffffffff81599c29>] print_usage_bug+0x1f4/0x205 [<ffffffff81093ad0>] ? check_usage_backwards+0x140/0x140 [<ffffffff810944d3>] mark_lock+0x223/0x2b0 [<ffffffff81094d60>] __lock_acquire+0x2b0/0x1a30 [<ffffffff81096c81>] lock_acquire+0x91/0x110 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff81068608>] flush_work+0x38/0x270 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90 [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff8109469d>] ? trace_hardirqs_on_caller+0xad/0x1c0 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffff810b4cc5>] call_timer_fn+0x75/0x180 [<ffffffff810b4c50>] ? process_timeout+0x10/0x10 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff810b50ac>] run_timer_softirq+0x1fc/0x2f0 [<ffffffff81054805>] __do_softirq+0x115/0x2e0 [<ffffffff81054c75>] irq_exit+0xa5/0xb0 [<ffffffff810049b3>] do_IRQ+0x53/0xf0 [<ffffffff815a74af>] common_interrupt+0x6f/0x6f <EOI> [<ffffffff8147b56e>] ? cpuidle_enter_state+0x6e/0x180 [<ffffffff8147b732>] cpuidle_enter+0x12/0x20 [<ffffffff8108bba0>] cpu_startup_entry+0x330/0x360 [<ffffffff8158fb51>] rest_init+0xc1/0xd0 [<ffffffff8158fa90>] ? csum_partial_copy_generic+0x170/0x170 [<ffffffff81af3ff2>] start_kernel+0x44f/0x45a [<ffffffff81af399c>] ? set_init_arg+0x53/0x53 [<ffffffff81af35ad>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81af36a0>] x86_64_start_kernel+0xf1/0xf4 Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-08-08Merge tag 'drivers-for-3.17' of ↵Linus Torvalds3-158/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
2014-07-29leds: ipaq-micro: fix sparse non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warnings: drivers/leds/leds-ipaq-micro.c:130:24: warning: symbol 'micro_leds_device_driver' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-07-23leds: add driver for the iPAQ microLinus Walleij3-0/+149
This adds a driver for the iPAQ microcontroller LED. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-07-09leds: atmel-pwm: remove obsolete driverAlexandre Belloni3-158/+0
The leds-atmel-pwm driver is now obsolete. It is not used by any mainlined boards and is replaced by the generic leds_pwm with the pwm-atmel driver using the generic PWM framework. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-03leds: convert blink timer to workqueueVincent Donnefort2-12/+13
This patch converts the blink timer from led-core to workqueue which is more suitable for this kind of non-priority operations. Moreover, timer may lead to errors when a LED setting function use a scheduling function such as pinctrl which is using mutex. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-07-03leds:pca963x: Always initialize MODE2 registerPeter Meerwald1-3/+7
PCA9632 defaults to open-drain PCA9633/4/5 defaults to totem-pole the driver assumed that totem-pole default and didn't actively set the value; the MODE2 register is now written if platform data indicating the mode is given Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>