summaryrefslogtreecommitdiffstats
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)4-4/+4
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-21Merge tag 'pwm/for-6.2-rc1' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various changes across the board, mostly improvements and cleanups" * tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits) pwm: pca9685: Convert to i2c's .probe_new() pwm: sun4i: Propagate errors in .get_state() to the caller pwm: Handle .get_state() failures pwm: sprd: Propagate errors in .get_state() to the caller pwm: rockchip: Propagate errors in .get_state() to the caller pwm: mtk-disp: Propagate errors in .get_state() to the caller pwm: imx27: Propagate errors in .get_state() to the caller pwm: cros-ec: Propagate errors in .get_state() to the caller pwm: crc: Propagate errors in .get_state() to the caller leds: qcom-lpg: Propagate errors in .get_state() to the caller drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller pwm/tracing: Also record trace events for failed API calls pwm: Make .get_state() callback return an error code pwm: pxa: Enable for MMP platform pwm: pxa: Add reference manual link and limitations pwm: pxa: Use abrupt shutdown mode pwm: pxa: Remove clk enable/disable from pxa_pwm_config pwm: pxa: Set duty cycle to 0 when disabling PWM pwm: pxa: Remove pxa_pwm_enable/disable pwm: mediatek: Add support for MT7986 ...
2022-12-17Merge tag 'leds-6.2-rc1' of ↵Linus Torvalds10-48/+44
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Lee Jones offered his help with maintaining LEDs, thanks a lot. Plus, there are some bugfixes as a bonus" * tag 'leds-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: MAINTAINERS: include dt-bindings headers leds: qcom,pm8058-led: Convert to DT schema leds: use sysfs_emit() to instead of scnprintf() leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3} MAINTAINERS: Add additional co-maintainer to LEDs leds: lp5523: fix out-of-bounds bug in lp5523_selftest() dt-bindings: leds: Add 'cpuX' to 'linux,default-trigger' led: qcom-lpg: Fix sleeping in atomic leds: max8997: Don't error if there is no pdata leds: lp55xx: remove variable j leds-pca955x: Remove the unused function pca95xx_num_led_regs()
2022-12-15Merge tag 'gpio-updates-for-v6.2' of ↵Linus Torvalds2-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have a new GPIO multiplexer driver, bunch of driver updates and refactoring in the core GPIO library. GPIO core: - teach gpiolib to work with software nodes for HW description - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on the number of GPIOS since the allocation became entirely dynamic - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC controller, Freescale PCIe and Ethernet controller, Himax LCDs and Mediatek mt2701 - refactor OF quirk code - some general refactoring of the OF and ACPI code, adding new helpers, minor tweaks and fixes, making fwnode usage consistent etc. GPIO uAPI: - fix an issue where the user-space can trigger a NULL-pointer dereference in the kernel by opening a device file, forcing a driver unbind and then calling one of the syscalls on the associated file descriptor New drivers: - add gpio-latch: a new GPIO multiplexer based on latches connected to other GPIOs Driver updates: - convert i2c GPIO expanders to using .probe_new() - drop the gpio-sta2x11 driver - factor out common code for the ACCES IDIO-16 family of controllers and use this new library wherever applicable in drivers - add DT support to gpio-hisi - allow building gpio-davinci as a module and increase its maxItems property - add support for a new model to gpio-pca9570 - other minor changes to various drivers" * tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits) gpio: sim: set a limit on the number of GPIOs gpiolib: protect the GPIO device against being dropped while in use by user-space gpiolib: cdev: fix NULL-pointer dereferences gpiolib: Provide to_gpio_device() helper gpiolib: Unify access to the device properties gpio: Do not include <linux/kernel.h> when not really needed. gpio: pcf857x: Convert to i2c's .probe_new() gpio: pca953x: Convert to i2c's .probe_new() gpio: max732x: Convert to i2c's .probe_new() dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names gpiolib: ensure that fwnode is properly set gpio: sl28cpld: Replace irqchip mask_invert with unmask_base gpiolib: of: Use correct fwnode for DT-probed chips gpiolib: of: Drop redundant check in of_mm_gpiochip_remove() gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode gpiolib: add support for software nodes gpiolib: consolidate GPIO lookups gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes gpiolib: acpi: change acpi_find_gpio() to accept firmware node ...
2022-12-07leds: use sysfs_emit() to instead of scnprintf()ye xingchen5-14/+14
Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-12-07leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3}Luca Weiss1-1/+2
The current setting lives in bits 4:2 (as also defined by the mask) but the current limit defines in the driver use bits 2:0 which should be shifted over so they don't get masked out completely (except for 17.5mA which became 10mA). Now checking /sys/kernel/debug/regmap/1-0068/registers shows that the current limit is applied correctly and doesn't take the default b000 = 42mA. Fixes: fa877cf1abb9 ("leds: is31fl319x: Add support for is31fl319{0,1,3} chips") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-12-06leds: qcom-lpg: Propagate errors in .get_state() to the callerUwe Kleine-König1-4/+4
.get_state() can return an error indication. Make use of it to propagate failing hardware accesses. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221130152148.2769768-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-06pwm: Make .get_state() callback return an error codeUwe Kleine-König1-6/+8
.get_state() might fail in some cases. To make it possible that a driver signals such a failure change the prototype of .get_state() to return an error code. This patch was created using coccinelle and the following semantic patch: @p1@ identifier getstatefunc; identifier driver; @@ struct pwm_ops driver = { ..., .get_state = getstatefunc ,... }; @p2@ identifier p1.getstatefunc; identifier chip, pwm, state; @@ -void +int getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { ... - return; + return 0; ... } plus the actual change of the prototype in include/linux/pwm.h (plus some manual fixing of indentions and empty lines). So for now all drivers return success unconditionally. They are adapted in the following patches to make the changes easier reviewable. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-11-09leds: lgm-sso: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov1-3/+2
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-09leds: gpio: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov1-3/+2
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-28leds: lp5523: fix out-of-bounds bug in lp5523_selftest()Maarten Zanders1-12/+15
When not all LED channels of the led chip are configured, the sysfs selftest functionality gives erroneous results and tries to test all channels of the chip. There is a potential for LED overcurrent conditions since the test current will be set to values from out-of-bound regions. It is wrong to use pdata->led_config[i].led_current to skip absent channels as led_config[] only contains the configured LED channels. Instead of iterating over all the physical channels of the device, loop over the available LED configurations and use led->chan_nr to access the correct i2c registers. Keep the zero-check for the LED current as existing users might depend on this to disable a channel. Reported-by: Arne Staessen <a.staessen@televic.com> Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-10-24leds: simatic-ipc-leds-gpio: fix incorrect LED to GPIO mappingHenning Schild1-6/+6
For apollolake the mapping between LEDs and GPIO pins was off because of a refactoring when we introduced a new device model. In addition to the reordering the indices in the lookup table need to be updated as well. Fixes: a97126265dfe ("leds: simatic-ipc-leds-gpio: add new model 227G") Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20221024092027.4529-1-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-10-22led: qcom-lpg: Fix sleeping in atomicDmitry Baryshkov1-7/+11
lpg_brighness_set() function can sleep, while led's brightness_set() callback must be non-blocking. Change LPG driver to use brightness_set_blocking() instead. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0 preempt_count: 101, expected: 0 INFO: lockdep is turned off. CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.1.0-rc1-00014-gbe99b089c6fc-dirty #85 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x88/0xb4 dump_stack+0x18/0x34 __might_resched+0x170/0x254 __might_sleep+0x48/0x9c __mutex_lock+0x4c/0x400 mutex_lock_nested+0x2c/0x40 lpg_brightness_single_set+0x40/0x90 led_set_brightness_nosleep+0x34/0x60 led_heartbeat_function+0x80/0x170 call_timer_fn+0xb8/0x340 __run_timers.part.0+0x20c/0x254 run_timer_softirq+0x3c/0x7c _stext+0x14c/0x578 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x164/0x170 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x64/0x68 cpuidle_enter_state+0xc8/0x380 cpuidle_enter+0x38/0x50 do_idle+0x244/0x2d0 cpu_startup_entry+0x24/0x30 rest_init+0x128/0x1a0 arch_post_acpi_subsys_init+0x0/0x18 start_kernel+0x6f4/0x734 __primary_switched+0xbc/0xc4 Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-10-22leds: max8997: Don't error if there is no pdataPaul Cercueil1-6/+1
The driver works just fine if no platform data is supplied. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-10-21leds: lp55xx: remove variable jColin Ian King1-2/+1
The variable j being incremented but it is never referenced, it is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-10-21leds-pca955x: Remove the unused function pca95xx_num_led_regs()Jiapeng Chong1-6/+0
The function pca95xx_num_led_regs() is defined in the leds-pca955x.c file, but not called elsewhere, so delete this unused function. drivers/leds/leds-pca955x.c:149:19: warning: unused function 'pca95xx_num_led_regs'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2411 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-10-14Merge tag 'leds-6.1-rc1' of ↵Linus Torvalds1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "This is very quiet release for LEDs, pca963 got blinking support and that's pretty much it" * tag 'leds-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca963: fix misleading indentation dt-bindings: leds: Document mmc trigger leds: pca963x: fix blink with hw acceleration
2022-10-05Merge tag 'platform-drivers-x86-v6.1-1' of ↵Linus Torvalds1-5/+37
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD Platform Management Framework (PMF) driver with AMT and QnQF support - AMD PMC: Improved logging for debugging s2idle issues - Big refactor of the ACPI/x86 backlight handling, ensuring that we only register 1 /sys/class/backlight device per LCD panel - Microsoft Surface: - Surface Laptop Go 2 support - Surface Pro 8 HID sensor support - Asus WMI: - Lots of cleanups - Support for TUF RGB keyboard backlight control - Add support for ROG X13 tablet mode - Siemens Simatic: IPC227G and IPC427G support - Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support - tools/power/x86/intel-speed-select: Various improvements - Various cleanups - Various small bugfixes * tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits) platform/x86: use PLATFORM_DEVID_NONE instead of -1 platform/x86/amd: pmc: Dump idle mask during "check" stage instead platform/x86/intel/wmi: thunderbolt: Use dev_groups callback platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks platform/surface: Split memcpy() of struct ssam_event flexible array platform/x86: compal-laptop: Get rid of a few forward declarations platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf() platform/x86: dell-smbios-base: Use sysfs_emit() platform/x86/amd/pmf: Remove unused power_delta instances platform/x86/amd/pmf: install notify handler after acpi init Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF platform/x86/amd/pmf: Add sysfs to toggle CnQF platform/x86/amd/pmf: Add support for CnQF platform/x86/amd: pmc: Fix build without debugfs platform/x86: hp-wmi: Support touchpad on/off platform/x86: int3472/discrete: Drop a forward declaration platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static platform/x86: wmi: Drop forward declaration of static functions platform/x86: toshiba_acpi: Remove duplicate include platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading ...
2022-09-26leds: pca963: fix misleading indentationPavel Machek1-1/+1
I'm getting warnings: /tmp/next/build/drivers/leds/leds-pca963x.c: In function 'pca963x_register_leds': /tmp/next/build/drivers/leds/leds-pca963x.c:355:3: error: this 'if' clause does not guard... +[-Werror=misleading-indentation] 355 | if (hw_blink) | ^~ /tmp/next/build/drivers/leds/leds-pca963x.c:357:4: note: ...this statement, but the latter is +misleadingly indented as if it were guarded by the 'if' 357 | led->blinking = false; | ^~~ cc1: all warnings being treated as errors Fix the indentation to make them go away. Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-09-21leds: pca963x: fix blink with hw accelerationBernardo Rodrigues1-2/+20
LEDs would behave differently depending on the blink hardware acceleration configuration. This commit will make LEDs respond exactly the same independently of the hardware acceleration status. In other words, if you had two pca963x, side by side, one with blink hardware acceleration "ON" and the other "OFF; and performed some arbitrary sequence of API calls (e.g. turn on/off, change brightness, change blink mode, etc.) you probably would end with not matching LED states. 'pca963x software blink' and 'leds-gpio' behavior were used as reference. Actual chip used to validate this change: pca9634 Some of the unmatched behaviors being fixed are (when hw blink was "ON") - Leds would stop blinking when the brightness was changed. - Leds would persist their blinking mode even after being turned off (brightness = 0). - Leds would only blink if another led was solid (pca963x will be forced out of low power) Signed-off-by: Bernardo Rodrigues <bernardocrodrigues@live.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-09-10leds: simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table staticHans de Goede1-1/+1
simatic_ipc_led_gpio_table is only used inside simatic-ipc-leds-gpio.c, make it static. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220910085836.84962-1-hdegoede@redhat.com
2022-09-01leds: simatic-ipc-leds-gpio: add new model 227GHenning Schild1-5/+37
This adds support of the Siemens Simatic IPC227G. Its LEDs are connected to GPIO pins provided by the gpio-f7188x module. We make sure that gets loaded, if not enabled in the kernel config no LED support will be available. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20220825104422.14156-6-henning.schild@siemens.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König25-72/+26
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16leds: lm3601x: Improve error reporting for problems during .remove()Uwe Kleine-König1-3/+8
Returning an error value in an i2c remove callback results in a generic error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. So instead of triggering the generic i2c error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making i2c remove callbacks return void. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16leds: lm3601x: Don't use mutex after it was destroyedUwe Kleine-König1-2/+0
The mutex might still be in use until the devm cleanup callback devm_led_classdev_flash_release() is called. This only happens some time after lm3601x_remove() completed. Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed") Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16leds: lm3697: Remove duplicated error reporting in .remove()Uwe Kleine-König1-3/+1
Returning an error value from an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. As lm3697_remove() already emits an error message on failure and the additional error message by the i2c core doesn't add any useful information, don't pass the error value up the stack. Instead continue to clean up and return 0. This patch is a preparation for making i2c remove callbacks return void. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-08Merge tag 'leds-5.20-rc1' of ↵Linus Torvalds7-198/+675
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "A new driver for bcm63138, is31fl319x updates, fixups for multicolor. The clevo-mail driver got disabled, it needs an API fix" * tag 'leds-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (23 commits) leds: is31fl319x: use simple i2c probe function leds: is31fl319x: Fix devm vs. non-devm ordering leds: is31fl319x: Make use of dev_err_probe() leds: is31fl319x: Make use of device properties leds: is31fl319x: Cleanup formatting and dev_dbg calls leds: is31fl319x: Add support for is31fl319{0,1,3} chips leds: is31fl319x: Move chipset-specific values in chipdef struct leds: is31fl319x: Use non-wildcard names for vars, structs and defines leds: is31fl319x: Add missing si-en compatibles dt-bindings: leds: pwm-multicolor: document max-brigthness leds: turris-omnia: convert to use dev_groups leds: leds-bcm63138: get rid of LED_OFF leds: add help info about BCM63138 module name dt-bindings: leds: leds-bcm63138: unify full stops in descriptions dt-bindings: leds: lp50xx: fix LED children names dt-bindings: leds: class-multicolor: reference class directly in multi-led node leds: bcm63138: add support for BCM63138 controller dt-bindings: leds: add Broadcom's BCM63138 controller leds: clevo-mail: Mark as broken pending interface fix leds: pwm-multicolor: Support active-low LEDs ...
2022-08-02leds: is31fl319x: use simple i2c probe functionAndy Shevchenko1-3/+2
The i2c probe functions here don't use the id information provided in their second argument, so the single-parameter i2c probe function ("probe_new") can be used instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Fix devm vs. non-devm orderingAndy Shevchenko1-23/+9
When non-devm resources are allocated they mustn't be followed by devm allocations, otherwise it will break the tear down ordering and might lead to crashes or other bugs during ->remove() stage. Fix this by wrapping mutex_destroy() call with devm_add_action_or_reset(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Make use of dev_err_probe()Andy Shevchenko1-20/+13
Simplify the error handling in probe function by switching from dev_err() to dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Make use of device propertiesAndy Shevchenko2-25/+21
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Cleanup formatting and dev_dbg callsVincent Knecht1-13/+9
Fix remaining non-standard place for comments. Remove remaining dev_dbg after regmap_read in is31fl3196_brightness_set. Remove __func__ in dev_dbg calls, instead adding "channel" string to describe the first displayed value. Change remaining container_of() call to be on one line, as well as a few others. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Add support for is31fl319{0,1,3} chipsVincent Knecht1-14/+147
Set specific chipset structs values for is31fl319{0,1,3} so that those chips can actually work. Datasheets: https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Move chipset-specific values in chipdef structVincent Knecht1-83/+125
Allow setting chips' specifics in chipdef struct by adding fields for: - the reset register address - a pointer to a regmap_config struct - a pointer to a brightness_set function - current default, min and max values - a boolean to distinguish 319{0,1,3} and 319{6,9} chips and use those fields in places where distinction has to be made. The fields for 319{0,1,3} still point to 319{6,9} values. No functional change. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Use non-wildcard names for vars, structs and definesVincent Knecht1-71/+71
In order to add real support for is31fl3190, is31fl3191 and is31fl3193, rename variant-dependent elements to not use 319X where needed. 3190 suffix is used for is31fl3190, is31fl3191 and is31fl3193 circuits. 3196 suffix is used for is31fl3196 and is31fl3199. Those two groups have different register maps, current settings and even a different interpretation of the software shutdown bit: https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf Rename variables, structures and defines in preparation of the splitting. No functional nor behaviour change. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Add missing si-en compatiblesVincent Knecht1-0/+8
Add si-en compatibles for all chip variants. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-30leds: turris-omnia: convert to use dev_groupsGreg Kroah-Hartman1-3/+1
The driver core supports the ability to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting this driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Cc: Pavel Machek <pavel@ucw.cz> Cc: linux-leds@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: leds-bcm63138: get rid of LED_OFFRafał Miłecki1-2/+1
The whole "enum led_brightness" is marked as obsolete. Replace it with a (non-)zero check. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: add help info about BCM63138 module nameRafał Miłecki1-0/+2
It's what we do for all other LEDs drivers. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: bcm63138: add support for BCM63138 controllerRafał Miłecki3-0/+321
It's a new controller first introduced in BCM63138 SoC. Later it was also used in BCM4908, some BCM68xx and some BCM63xxx SoCs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: clevo-mail: Mark as broken pending interface fixPavel Machek1-3/+3
Setting blink rate using brightness is unusual and should be fixed. Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: pwm-multicolor: Support active-low LEDsEmil Renner Berthing1-0/+5
Add support for LEDs wired up to light when the PWM output is low, just like the regular PWM LEDs. Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: pwm-multicolor: Don't show -EPROBE_DEFER as errorsEmil Renner Berthing1-2/+1
When requesting a PWM it might return -EPROBE_DEFER if it hasn't probed yet. This is not an error, so just propagate the -EPROBE_DEFER without logging anything. There is already dev_err_probe for exactly this situation. Fixes: 9fa2762110dd ("leds: Add PWM multicolor driver") Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: clevo-mail: fix Kconfig "its" grammarRandy Dunlap1-1/+1
Use the possessive "its" instead of the contraction "it's" where appropriate. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-14leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driverHenning Schild4-80/+113
On Apollo Lake the pinctrl drivers will now come up without ACPI. Use that instead of open coding it. Create a new driver for that which can later be filled with more GPIO based models, and which has different dependencies. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-14leds: simatic-ipc-leds: Convert to use P2SB accessorHenning Schild2-7/+8
Since we have a common P2SB accessor in tree we may use it instead of open coded variants. Replace custom code by p2sb_bar() call. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org>
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-24leds: qcom-lpg: Require pattern to follow documentationBjorn Andersson1-5/+38
The leds-trigger-pattern documentation describes how the brightness of the LED should transition linearly from one brightness value to the next, over the given delta_t. But the pattern engine in the Qualcomm LPG hardware only supports holding the brightness for each entry for the period. This subset of patterns can be represented in the leds-trigger-pattern by injecting zero-time transitions after each entry in the pattern, resulting in a pattern that pattern that can be rendered by the LPG. Rework LPG pattern interface to require these zero-time transitions, to make it comply with this subset of patterns and reject the patterns it can't render. Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-07leds: lp50xx: Remove duplicated error reporting in .remove()Uwe Kleine-König1-3/+1
Returning an error value from an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. As stk3310_set_state() already emits an error message on failure and the additional error message by the i2c core doesn't add any useful information, don't pass the error value up the stack. Instead continue to clean up and return 0. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-07leds: qcom-lpg: add missing PWM dependencyJohan Hovold1-0/+1
The Qualcomm LPG driver fails to probe unless PWM support is enabled so add the missing Kconfig dependency. Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-26 12:04:44 +0000