summaryrefslogtreecommitdiffstats
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2018-05-24leds: class: ensure workqueue is initialized before setting brightnessLuis Henriques1-2/+8
An application can try to set brightness before all the initialization is done, in particular before the workqueue is initialized with the call to led_init_core(). Here's a WARNING easy to trigger: [ 36.780813] WARNING: CPU: 3 PID: 1411 at ../kernel/workqueue.c:1444 __queue_work+0x37b/0x420 [ 36.780815] Modules linked in: ... [ 36.780868] CPU: 3 PID: 1411 Comm: systemd-backlig Not tainted 4.16.9-1-default #1 openSUSE Tumbleweed (unreleased) [ 36.780868] Hardware name: Dell Inc. Precision 5510/0N8J4R, BIOS 1.6.1 12/11/2017 [ 36.780870] RIP: 0010:__queue_work+0x37b/0x420 [ 36.780871] RSP: 0018:ffffaced048b7d78 EFLAGS: 00010086 [ 36.780873] RAX: 0000000000000000 RBX: ffffffffb3f01440 RCX: 0000000000000000 [ 36.780873] RDX: ffffffffc05a90d8 RSI: 0000000000000000 RDI: ffff8eac7dce2700 [ 36.780874] RBP: ffff8ea547c16400 R08: ffff8ea547800000 R09: ffff8eac7dc22700 [ 36.780875] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000003 [ 36.780876] R13: 0000000000000200 R14: ffffffffc05a90d0 R15: ffff8eac7dce8600 [ 36.780877] FS: 00007f871e61cf40(0000) GS:ffff8eac7dcc0000(0000) knlGS:0000000000000000 [ 36.780878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.780879] CR2: 000055c91115e308 CR3: 0000000883ee0005 CR4: 00000000003606e0 [ 36.780880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 36.780880] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 36.780881] Call Trace: [ 36.780886] queue_work_on+0x81/0x90 [ 36.780889] brightness_store+0x5d/0x90 [ 36.780892] kernfs_fop_write+0x105/0x180 [ 36.780894] __vfs_write+0x26/0x150 [ 36.780897] ? common_file_perm+0x51/0x150 [ 36.780900] ? security_file_permission+0x3c/0xb0 [ 36.780901] vfs_write+0xad/0x1a0 [ 36.780903] SyS_write+0x42/0x90 [ 36.780906] do_syscall_64+0x76/0x140 [ 36.780908] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 36.780910] RIP: 0033:0x7f871dd04c94 [ 36.780910] RSP: 002b:00007ffeb3a57d38 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 36.780912] RAX: ffffffffffffffda RBX: 000055c91115c810 RCX: 00007f871dd04c94 [ 36.780912] RDX: 0000000000000001 RSI: 000055c91115c810 RDI: 0000000000000004 [ 36.780913] RBP: 00007ffeb3a57e10 R08: 0000000000000003 R09: 0000000000000000 [ 36.780914] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [ 36.780914] R13: 000055c911158f30 R14: 000055c90f3a9a4e R15: 0000000000000004 [ 36.780917] Code: 74 18 e8 49 80 00 00 48 85 c0 74 0e 48 8b 40 20 48 3b 68 08 0f 84 c2 fc ff ff 0f 0b 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b e9 82 fd ff ff 83 cd 02 49 8d 57 60 e9 69 fd ff ff 80 3d [ 36.780942] ---[ end trace 1fce4edad54c4017 ]--- This patch initializes and acquires the led_access mutex early in the of_led_classdev_register function, so that any application trying to write to sysfs to set brightness will block until initialization ends. Signed-off-by: Luis Henriques <lhenriques@suse.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-23leds: lm3601x: Introduce the lm3601x LED driverDan Murphy3-0/+497
Introduce the family of LED devices that can drive a torch, strobe or IR LED. The LED driver can be configured with a strobe timer to execute a strobe flash. The IR LED brightness is controlled via the torch brightness register. The data sheet for each the LM36010 and LM36011 LED drivers can be found here: http://www.ti.com/product/LM36010 http://www.ti.com/product/LM36011 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-22leds: sc27xx: Fix return value check in sc27xx_led_probe()Wei Yongjun1-2/+2
In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e081c49e30ec ("leds: Add Spreadtrum SC27xx breathing light controller driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-14leds: Add Spreadtrum SC27xx breathing light controller driverBaolin Wang3-0/+256
This patch adds Spreadtrum SC27xx PMIC series breathing light controller driver, which can support 3 LEDs. Each LED can work at normal PWM mode and breathing mode. Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-03leds: wm831x-status: Use sysfs_match_string() helperAndy Shevchenko1-16/+6
Use sysfs_match_string() helper instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-04-16leds: add LED driver for CR0014114 boardOleh Kravchenko3-0/+329
This patch adds a LED class driver for the RGB LEDs found on the Crane Merchandising System CR0014114 LEDs board. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-03-20leds: Fix wrong dmi_match on PC Engines APU LEDsHans Ulli Kroll1-1/+1
BIOS on APU board doesn't expose board_name property, and thus we have to rely on the product_name instead. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-03-11leds: Extends disk trigger for reads and writesLinus Walleij1-1/+11
This adds two new disk triggers for triggering on reads and writes respectively, named "disk-read" and "disk-write". The use case comes from working on the D-Link DNS-313 NAS box. This features an RGB LED for disk activity. with these two triggers I can couple the green LED to read activity and the red LED to write activity, which gives the appropriate user feedback about what is happening on the disk. When tested it gave exactly the feedback desired. The in-kernel interface is simply changed to pass a bool indicating if the activity is write activity and update each trigger (and the composite "disk-activity" trigger) depending on what is passed in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-19leds: Add more product/board names for PC Engines APU2Timothy Redaelli1-2/+24
PC Engines "legacy" coreboot 4.0.8 changed the product/board name from "APU2" to "apu2". PC Engines "mainline" coreboot uses, instead, "PC Engines apu2" as product/board name. This commit adds the 2 variants ("apu2" and "PC Engines apu2") of product/board name to be compatible with all the APU2 BIOSes. Fixes: 3faee9423ce0 ("leds: Add driver for PC Engines APU/APU2 LEDs") Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-19leds: add driver for support Mellanox regmap LEDs for BMC and x86 platformVadim Pasternak3-0/+291
Driver obtains LED devices according to system configuration and creates devices in form: "devicename:color:function", like The full path is to be: /sys/class/leds/mlxreg\:status\:amber/brightness After timer trigger activation: echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger Attributes for LED blinking will appaer in sysfs infrastructure: /sys/class/leds/mlxreg\:status\:amber/delay_off /sys/class/leds/mlxreg\:status\:amber/delay_on LED setting is controlled through the on-board programmable devices, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-15leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIGVadim Pasternak1-5/+5
It fixes grammatical errors in Kconfig file for LEDS_SYSCON, LEDS_MLXCPLD, LEDS_MC13783, LEDS_NETXBIG. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-12leds: Clarify supported chips by LM355x driverPavel Machek1-4/+4
Clarify which controllers are supported by which driver. Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-12leds: leds-mlxcpld: Allow compilation for 32 bit archVadim Pasternak1-1/+1
It makes leds-mlxcpld available for 32 bit architecture. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge tag 'leds_for_4.16-rc1' of ↵Linus Torvalds11-47/+973
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - introduce LM3692x dual string driver New LED trigger: - introduce a NETDEV trigger leds-lp8860: - various fixes to align with LED framework - add regulator enable during init - DT support related improvements Minor fixes and cleanups to the LED class drivers: - leds-pwm - ledtrig-activity - leds-blinkm - leds-as3645a - ledtrig-transient" * tag 'leds_for_4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: ledtrig-transient: Add SPDX license identifiers leds: lp8860: Various fixes to align with LED framework leds: lp8860: Add DT parsing to retrieve the trigger node dt: bindings: lp8860: Add trigger binding to the lp8860 leds: lp8860: Update the dt parsing for LED labeling dt: bindings: lp8860: Update DT label binding dt: bindings: lp8860: Update bindings for lp8860 leds: as3645a: Fix line over 80 characters leds: as3645a: Fix quoted string split warning leds: lm3692x: Introduce LM3692x dual string driver dt: bindings: lm3692x: Add bindings for lm3692x LED driver leds: trigger: Introduce a NETDEV trigger leds: blinkm: avoid uninitialized data use ledtrig-activity: Grammar s/a immediate/an immediate/ leds: pwm: Remove unneeded header file leds: lp8860: Add regulator enable during init leds: lp8860: Fix linuxdoc format for structure
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-29Merge tag 'mfd-next-4.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for RAVE Supervisory Processor Moved drivers: - Move Realtek Card Reader Driver to Misc New Device Support: - Add support for Pinctrl to axp20x New Functionality: - Add resume support to atmel-flexcom Fix-ups: - Split MFD (mfd) and userspace handlers (platform) in cros_ec - Fix trivial (whitespace, spelling) issue(s) in pcf50633-core - Clean-up error handling in ab8500-debugfs - General tidying up in tmio_core - Kconfig fix-ups for qcom-pm8xxx - Licensing changes (SPDX) to stm32-lptimer, stm32-timers - Device Tree fixups in mc13xxx - Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc, kempld-core, intel_soc_pmic_core.c, ab8500-debugfs" * tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro atmel_flexcom: Support resuming after a chip reset mfd: Remove duplicate includes dt-bindings: mfd: mc13xxx: Add the unit address to sysled mfd: stm32: Adopt SPDX identifier mfd: axp20x: Add pinctrl cell for AXP813 mfd: pm8xxx: Make elegible for COMPILE_TEST mfd: kempld-core: Use resource_size function on resource object mfd: tmio: Move register macros to tmio_core.c mfd: cros ec: spi: Simplify delay handling between SPI messages mfd: palmas: Assign the right powerhold mask for tps65917 mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers() mfd: ti_am335x_tscadc: Remove redundant assignment to node mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed' dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver watchdog: Add RAVE SP watchdog driver mfd: Add driver for RAVE Supervisory Processor serdev: Introduce devm_serdev_device_open() ...
2018-01-11leds: ledtrig-transient: Add SPDX license identifiersShuah Khan1-20/+13
Replace GPL license statements with SPDX GPL-2.0 license identifiers and correct the module license to GPLv2. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lp8860: Various fixes to align with LED frameworkDan Murphy2-9/+6
Update the driver to conform with the LED framework: - use devm_led_classdev_register - destroy mutex on exit - remove dependency on CONFIG_OF in the driver and move to the Kconfig - update the MODULE_LICENSE to GPL v2 - remove setting of MAX brightness as the LED framework does this. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lp8860: Add DT parsing to retrieve the trigger nodeDan Murphy1-0/+4
Add the ability to parse the DT and set the default trigger mode for the LED. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lp8860: Update the dt parsing for LED labelingDan Murphy1-11/+12
Update the DT parsing for the label node so that the label is retrieved from the device child as opposed to being part of the parent. This will align this driver with the LED binding documentation Documentation/devicetree/bindings/leds/common.txt Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: as3645a: Fix line over 80 charactersDan Murphy1-1/+2
Fix the warning for line over 80 characters. WARNING: line over 80 characters 363: FILE: drivers/leds/leds-as3645a.c:363: flash->flash_current = as3645a_current_to_reg(flash, true, brightness_ua); Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: as3645a: Fix quoted string split warningDan Murphy1-2/+2
Fix a warning for a split quoted string across lines. WARNING: quoted string split across lines 459: FILE: drivers/leds/leds-as3645a.c:459: dev_err(dev, "AS3645A not detected " "(model %d rfu %d)\n", model, rfu); Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lm3692x: Introduce LM3692x dual string driverDan Murphy3-0/+401
Introducing the LM3692x Dual-String white LED driver. Data sheet is located http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: trigger: Introduce a NETDEV triggerBen Whitten3-0/+504
This commit introduces a NETDEV trigger for named device activity. Available triggers are link, rx, and tx. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: blinkm: avoid uninitialized data useArnd Bergmann1-0/+4
gcc-8 reports missing error handling in blinkm_detect, when blinkm() fails, tmpargs[] is uninitialized: drivers/leds/leds-blinkm.c: In function 'blinkm_detect': drivers/leds/leds-blinkm.c:555:6: error: 'tmpargs' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds a missing error checks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08ledtrig-activity: Grammar s/a immediate/an immediate/Geert Uytterhoeven1-1/+1
Fixes: 7df4f9a9f0667ee6 ("leds: ledtrig-activity: Add a system activity LED trigger") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: pwm: Remove unneeded header fileFabio Estevam1-1/+0
There is nothing provided by <linux/fb.h> that is used here, so remove this unneeded header file. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lp8860: Add regulator enable during initDan Murphy1-1/+23
Add the regulator enable call during initialization. If init fails then disable the regulator. Also during init the gpio gets set low even on a passing case so add if everything passes then return. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lp8860: Fix linuxdoc format for structureDan Murphy1-1/+1
Fix the linuxdoc format defining the lp8860 structure. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-07leds: core: Fix regression caused by commit 2b83ff96f51dJacek Anaszewski1-1/+2
Commit 2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0") replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink() in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev. Cleansing of the latter ones wasn't required to fix the original issue but wasn't considered harmful. It nonetheless turned out to be so in case when pointer to one or both props is passed to led_blink_set() like in the ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or delay_off arguments to led_blink_setup(), which results either in stopping the software blinking or setting blinking frequency always to 1Hz. Avoid using led_stop_software_blink() and add a single call required to clear LED_BLINK_SW flag, which was the only needed modification to fix the original issue. Fixes 2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0") Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-12-27led: core: Fix brightness setting when setting delay_off=0Matthieu CASTET1-1/+1
With the current code, the following sequence won't work : echo timer > trigger echo 0 > delay_off * at this point we call ** led_delay_off_store ** led_blink_set *** stop timer ** led_blink_setup ** led_set_software_blink *** if !delay_on, led off *** if !delay_off, set led_set_brightness_nosleep <--- LED_BLINK_SW is set but timer is stop *** otherwise start timer/set LED_BLINK_SW flag echo xxx > brightness * led_set_brightness ** if LED_BLINK_SW *** if brightness=0, led off *** else apply brightness if next timer <--- timer is stop, and will never apply new setting ** otherwise set led_set_brightness_nosleep To fix that, when we delete the timer, we should clear LED_BLINK_SW. Cc: linux-leds@vger.kernel.org Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-12-01leds: pm8058: Silence pointer to integer size warningBjorn Andersson1-1/+1
The pointer returned by of_device_get_match_data() doesn't have the same size as u32 on 64-bit architectures, causing a compile warning when compile-testing the driver on such platform. Cast the return value of of_device_get_match_data() to unsigned long and then to u32 to silence this warning. Fixes: 7f866986e705 ("leds: add PM8058 LEDs driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-14Merge tag 'leds_for_4.15rc1' of ↵Linus Torvalds12-22/+608
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - add a driver for PC Engines APU/APU2 LEDs New LED trigger: - add a system activity LED trigger LED core improvements: - replace flags bit shift with BIT() macros Convert timers to use timer_setup() in: - led-core - ledtrig-activity - ledtrig-heartbeat - ledtrig-transient LED class drivers fixes: - lp55xx: fix spelling mistake: 'cound' -> 'could' - tca6507: Remove unnecessary reg check - pca955x: Don't invert requested value in pca955x_gpio_set_value() LED documentation improvements: - update 00-INDEX file" * tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: Add driver for PC Engines APU/APU2 LEDs leds: lp55xx: fix spelling mistake: 'cound' -> 'could' leds: Convert timers to use timer_setup() Documentation: leds: Update 00-INDEX file leds: tca6507: Remove unnecessary reg check leds: ledtrig-heartbeat: Convert timers to use timer_setup() leds: Replace flags bit shift with BIT() macros leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() leds: ledtrig-activity: Add a system activity LED trigger
2017-11-06leds: Add driver for PC Engines APU/APU2 LEDsAlan Mizrahi3-0/+289
This patch implements the driver to support the front panel LEDs for PC Engines APU and APU2 boards. Signed-off-by: Alan Mizrahi <alan@mizrahi.com.ve> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30leds: lp55xx: fix spelling mistake: 'cound' -> 'could'Arvind Yadav1-1/+1
Trivial fix to spelling mistakes in 'lp5523_init_program_engine'. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-10-25leds: Convert timers to use timer_setup()Kees Cook3-15/+18
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Willy Tarreau <w@1wt.eu> Cc: linux-leds@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-10-09leds: tca6507: Remove unnecessary reg checkChristos Gkekas1-1/+1
Variable reg is unsigned so checking whether it is less than zero is not necessary. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-10-06leds: ledtrig-heartbeat: Convert timers to use timer_setup()Kees Cook1-6/+10
Instead of using .data directly, convert to from_timer. Since the trigger_data is allocated separately, the led_cdev must be explicitly tracked for the callback. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Zhang Bo <bo.zhang@nxp.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-leds@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-10-06leds: pca955x: Don't invert requested value in pca955x_gpio_set_value()Andrew Jeffery1-5/+12
The PCA9552 lines can be used either for driving LEDs or as GPIOs. The manual states that for LEDs, the operation is open-drain: The LSn LED select registers determine the source of the LED data. 00 = output is set LOW (LED on) 01 = output is set high-impedance (LED off; default) 10 = output blinks at PWM0 rate 11 = output blinks at PWM1 rate For GPIOs it suggests a pull-up so that the open-case drives the line high: For use as output, connect external pull-up resistor to the pin and size it according to the DC recommended operating characteristics. LED output pin is HIGH when the output is programmed as high-impedance, and LOW when the output is programmed LOW through the ‘LED selector’ register. The output can be pulse-width controlled when PWM0 or PWM1 are used. Now, I have a hardware design that uses the LED controller to control LEDs. However, for $reasons, we're using the leds-gpio driver to drive the them. The reasons are here are a tangent but lead to the discovery of the inversion, which manifested as the LEDs being set to full brightness at boot when we expected them to be off. As we're driving the LEDs through leds-gpio, this means wending our way through the gpiochip abstractions. So with that in mind we need to describe an active-low GPIO configuration to drive the LEDs as though they were GPIOs. The set() gpiochip callback in leds-pca955x does the following: ... if (val) pca955x_led_set(&led->led_cdev, LED_FULL); else pca955x_led_set(&led->led_cdev, LED_OFF); ... Where LED_FULL = 255. pca955x_led_set() in turn does: ... switch (value) { case LED_FULL: ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_ON); break; ... Where PCA955X_LS_LED_ON is defined as: #define PCA955X_LS_LED_ON 0x0 /* Output LOW */ So here we have some type confusion: We've crossed domains from GPIO behaviour to LED behaviour without accounting for possible inversions in the process. Stepping back to leds-gpio for a moment, during probe() we call create_gpio_led(), which eventually executes: if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { state = gpiod_get_value_cansleep(led_dat->gpiod); if (state < 0) return state; } else { state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); } ... ret = gpiod_direction_output(led_dat->gpiod, state); In the devicetree the GPIO is annotated as active-low, and gpiod_get_value_cansleep() handles this for us: int gpiod_get_value_cansleep(const struct gpio_desc *desc) { int value; might_sleep_if(extra_checks); VALIDATE_DESC(desc); value = _gpiod_get_raw_value(desc); if (value < 0) return value; if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; return value; } _gpiod_get_raw_value() in turn calls through the get() callback for the gpiochip implementation, so returning to our get() implementation in leds-pca955x we find we extract the raw value from hardware: static int pca955x_gpio_get_value(struct gpio_chip *gc, unsigned int offset) { struct pca955x *pca955x = gpiochip_get_data(gc); struct pca955x_led *led = &pca955x->leds[offset]; u8 reg = pca955x_read_input(pca955x->client, led->led_num / 8); return !!(reg & (1 << (led->led_num % 8))); } This behaviour is not symmetric with that of set(), where the val is inverted by the driver. Closing the loop on the GPIO_ACTIVE_LOW inversions, gpiod_direction_output(), like gpiod_get_value_cansleep(), handles it for us: int gpiod_direction_output(struct gpio_desc *desc, int value) { VALIDATE_DESC(desc); if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; else value = !!value; return _gpiod_direction_output_raw(desc, value); } All-in-all, with a value of 'keep' for default-state property in a leds-gpio child node, the current state of the hardware will in-fact be inverted; precisely the opposite of what was intended. Rework leds-pca955x so that we avoid the incorrect inversion and clarify the semantics with respect to GPIO. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Matt Spinler <mspinler@linux.vnet.ibm.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-10-06leds: ledtrig-activity: Add a system activity LED triggerWilly Tarreau3-0/+283
The "activity" trigger was inspired by the heartbeat one, but aims at providing instant indication of the immediate CPU usage. Under idle condition, it flashes 10ms every second. At 100% usage, it flashes 90ms every 100ms. The blinking frequency increases from 1 to 10 Hz until either the load is high enough to saturate one CPU core or 50% load is reached on a single-core system. Then past this point only the duty cycle increases from 10 to 90%. This results in a very visible activity reporting allowing one to immediately tell whether a machine is under load or not, making it quite suitable to be used in clusters. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-23as3645a: Unregister indicator LED on device unbindSakari Ailus1-0/+1
The indicator LED was registered in probe but was not removed in driver remove callback. Fix this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-23as3645a: Use integer numbers for parsing LEDsSakari Ailus1-2/+24
Use integer numbers for LEDs, 0 is the flash and 1 is the indicator. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-23as3645a: Use ams,input-max-microamp as documented in DT bindingsSakari Ailus1-1/+1
DT bindings document the property "ams,input-max-microamp" that limits the chip's maximum input current. The driver and the DTS however used "peak-current-limit" property. Fix this by using the property documented in DT binding documentation. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig2-2/+2
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-07Merge tag 'leds_for_4.14' of ↵Linus Torvalds12-94/+329
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED class drivers improvements: leds-pca955x: - add Device Tree support and bindings - use devm_led_classdev_register() - add GPIO support - prevent crippled LED class device name - check for I2C errors leds-gpio: - add optional retain-state-shutdown DT property - allow LED to retain state at shutdown leds-tlc591xx: - merge conditional tests - add missing of_node_put leds-powernv: - delete an error message for a failed memory allocation in powernv_led_create() leds-is31fl32xx.c - convert to using custom %pOF printf format specifier Constify attribute_group structures in: - leds-blinkm - leds-lm3533 Make several arrays static const in: - leds-aat1290 - leds-lp5521 - leds-lp5562 - leds-lp8501" * tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: check for I2C errors leds: gpio: Allow LED to retain state at shutdown dt-bindings: leds: gpio: Add optional retain-state-shutdown property leds: powernv: Delete an error message for a failed memory allocation in powernv_led_create() leds: lp8501: make several arrays static const leds: lp5562: make several arrays static const leds: lp5521: make several arrays static const leds: aat1290: make array max_mm_current_percent static const leds: pca955x: Prevent crippled LED device name leds: lm3533: constify attribute_group structure dt-bindings: leds: add pca955x leds: pca955x: add GPIO support leds: pca955x: use devm_led_classdev_register leds: pca955x: add device tree support leds: Convert to using %pOF instead of full_name leds: blinkm: constify attribute_group structures. leds: tlc591xx: add missing of_node_put leds: tlc591xx: merge conditional tests
2017-09-05media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependencyArnd Bergmann1-0/+1
We get a link error when V4L2_FLASH_LED_CLASS=m and AS3645A is built-in: drivers/leds/leds-as3645a.o: In function `as3645a_v4l2_setup': leds-as3645a.c:(.text+0x258): undefined reference to `v4l2_flash_init' leds-as3645a.c:(.text+0x284): undefined reference to `v4l2_flash_indicator_init' leds-as3645a.c:(.text+0x2a4): undefined reference to `v4l2_flash_release' drivers/leds/leds-as3645a.o: In function `as3645a_remove': leds-as3645a.c:(.text+0x784): undefined reference to `v4l2_flash_release' This adds the same Kconfig dependency that the other V4L2 flash drivers in drivers/leds use, to avoid that broken configuration. Fixes: a56ba8fbcb55 ("media: leds: as3645a: Add LED flash class driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-30leds: pca955x: check for I2C errorsCédric Le Goater1-31/+83
This should also allow probing to fail when a pca955x chip is not found on a I2C bus. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 06:40:35 +0000