summaryrefslogtreecommitdiffstats
path: root/drivers/isdn/gigaset
AgeCommit message (Collapse)AuthorFilesLines
2012-04-09isdn/gigaset: use gig_dbg() for debugging outputTilman Schmidt1-1/+1
The "TTY buffer in tty_port" patchset introduced an opencoded debug message in the Gigaset tty device if_close() function. Change it to use the gig_dbg() macro like everywhere else in the driver. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds12-441/+441
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-08TTY: isdn/gigaset, use tty_portJiri Slaby3-31/+21
Let us port the code to use tty_port. We now use open_count and tty from there. This allows us also to use tty_port_tty_set with tty refcounting instead of hand-written locking and logic. Note that tty and open_count are no longer protected by cs->lock. It is protected by tty_port->lock. But since all the places where they were used are now switched to the helpers, we are fine. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Hansjoerg Lipp <hjlipp@web.de> Acked-by: Tilman Schmidt <tilman@imap.cc> Cc: <gigaset307x-common@lists.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: isdn/gigaset, do not set tty->driver_data to NULLJiri Slaby1-91/+14
Close the window in open where driver_data is reset to NULL on each open. It could cause other processes to get invalid retval from the tty->ops operations because of the checks all over the code. With this change we may do other cleanups. Now, the only valid check for tty->driver_data != NULL is in close. This can happen only if open fails at gigaset_get_cs_by_tty or try_module_get. The rest of checks in various tty->ops->* are invalid as driver_data cannot be NULL there. The same holds for cs->open_count. So remove them. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: gigaset307x-common@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove unneeded tty->index checksJiri Slaby1-2/+0
Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove re-assignments to tty_driver membersJiri Slaby1-6/+1
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-27gigaset: Use semicolons to terminate statementsJoe Perches1-4/+4
Commas are not generally used at locations where statement termination semicolons are used. Realign each field set at appropriate indentation. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21isdn: whitespace coding style cleanupJoe Perches12-442/+442
isdn source code uses a not-current coding style. Update the coding style used on a per-line basis so that git diff -w shows only elided blank lines at EOF. Done with emacs and some scripts and some typing. Built x86 allyesconfig. No detected change in objdump -d or size. Signed-off-by: Joe Perches <joe@perches.com>
2011-11-27isdn/gigaset: report ISDN4Linux interface only onceTilman Schmidt1-2/+1
Move the "ISDN4Linux interface" message from device registration, where it is emitted for each device, to driver registration, where it is emitted only once, for consistency with the CAPI variant. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31drivers/isdn: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required.Paul Gortmaker5-0/+5
In preparation of the module.h usage cleanup, call out the header that we need to get EXPORT_SYMBOL variants and THIS_MODULE into scope. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31drivers/isdn: Add module.h to ISDN files implicitly using it.Paul Gortmaker1-0/+1
So that we don't get build failures once the implicit module.h presence is terminated. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-17gigaset: call module_put before restart of if_open()Pavel Shved1-1/+3
if_open() calls try_module_get(), and after an attempt to lock a mutex the if_open() function may return -ERESTARTSYS without putting the module. Then, when if_open() is executed again, try_module_get() is called making the reference counter of THIS_MODULE greater than one at successful exit from if_open(). The if_close() function puts the module only once, and as a result it can't be unloaded. This patch adds module_put call before the return from if_open(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved <shved@ispras.ru> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-04Revert "tty: make receive_buf() return the amout of bytes received"Linus Torvalds1-5/+3
This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41af6a: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41af6a. Milton Miller pointed out the 'unsigned int' issue. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Milton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23Merge branch 'tty-next' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits) serial: 8250_pci: add support for Cronyx Omega PCI multiserial board. tty/serial: Fix break handling for PORT_TEGRA tty/serial: Add explicit PORT_TEGRA type n_tracerouter and n_tracesink ldisc additions. Intel PTI implementaiton of MIPI 1149.7. Kernel documentation for the PTI feature. export kernel call get_task_comm(). tty: Remove to support serial for S5P6442 pch_phub: Support new device ML7223 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter ASoC: Update cx20442 for TTY API change pch_uart: Support new device ML7223 IOH parport: Use request_muxed_region for IT87 probe and lock tty/serial: add support for Xilinx PS UART n_gsm: Use print_hex_dump_bytes drivers/tty/moxa.c: Put correct tty value TTY: tty_io, annotate locking functions TTY: serial_core, remove superfluous set_task_state TTY: serial_core, remove invalid test Char: moxa, fix locking in moxa_write ... Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and drivers/tty/serial/Makefile. I did the hci_ldisc thing as an evil merge, cleaning things up.
2011-04-22tty: make receive_buf() return the amout of bytes receivedFelipe Balbi1-3/+5
it makes it simpler to keep track of the amount of bytes received and simplifies how flush_to_ldisc counts the remaining bytes. It also fixes a bug of lost bytes on n_tty when flushing too many bytes via the USB serial gadget driver. Tested-by: Stefan Bigler <stefan.bigler@keymile.com> Tested-by: Toby Gray <toby.gray@realvnc.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-17isdn: gigaset: Fix set-but-unused variable.David S. Miller1-5/+0
The variable 'offset' is set but unused in write_iso_tasklet(). Just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30kstrtox: convert drivers/isdn/Alexey Dobriyan1-17/+9
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17tty: now phase out the ioctl file pointer for goodAlan Cox1-2/+2
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmset: kill the file pointer argumentAlan Cox2-3/+3
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmget: kill off the passing of the struct fileAlan Cox1-2/+2
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2010-12-31ISDN, Gigaset: Fix memory leak in do_disconnect_req()Jesper Juhl1-0/+1
Hi, In drivers/isdn/gigaset/capi.c::do_disconnect_req() we will leak the memory allocated (with kmalloc) to 'b3cmsg' if the call to alloc_skb() fails. ... b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL); allocation here ------^ if (!b3cmsg) { dev_err(cs->dev, "%s: out of memory\n", __func__); send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); return; } capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, ap->nextMessageNumber++, cmsg->adr.adrPLCI | (1 << 16)); b3cmsg->Reason_B3 = CapiProtocolErrorLayer1; b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL); if (b3skb == NULL) { dev_err(cs->dev, "%s: out of memory\n", __func__); send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); return; leak here ------^ ... This leak is easily fixed by just kfree()'ing the memory allocated to 'b3cmsg' right before we return. The following patch does that. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König3-6/+6
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01isdn/gigaset: improve bas_gigaset USB error reportingTilman Schmidt1-51/+61
Rephrase some USB error messages to make them clearer and more consistent. Downgrade some warning messages that may occur during normal operation to debug messages. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: fix bas_gigaset interrupt read error handlingTilman Schmidt1-13/+93
Rework the handling of USB errors in interrupt input reads to clear halts correctly, delay URB resubmission after errors, limit retries, and improve error recovery. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: unclog bas_gigaset AT response pipeTilman Schmidt1-0/+22
Recover from a lost HD_RECEIVEATDATA_ACK message by sending a zero-length HD_READ_ATMESSAGE command when ev_layer sends "+++". Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: try USB reset for bas_gigaset error recoveryTilman Schmidt1-2/+4
In error_reset(), if sending HD_RESET_INTERRUPT_PIPE to the device fails, try performing an USB reset. Also correct an error in the leading comment. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: bas_gigaset timer cleanupTilman Schmidt1-33/+32
Use setup_timer() and mod_timer() instead of direct assignment to timer structure members, simplify the argument of one timer routine, and make extra sure all timers are stopped during suspend. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: drop obsolete debug optionTilman Schmidt3-30/+1
Remove the debug flag DEBUG_DRIVER and associated code. It doesn't serve any useful purpose anymore. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: correct bas_gigaset rx buffer handlingTilman Schmidt1-3/+5
In transparent data reception, avoid a NULL pointer dereference in case an skbuff cannot be allocated, remove an inappropriate call to the HDLC flush routine, and correct the accounting of received bytes for continued buffers. Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: fix bas_gigaset AT read error handlingTilman Schmidt1-50/+33
Rework the handling of USB errors in AT response reads to fix a possible infinite retry loop and a memory leak, and silence a few overly verbose kernel messages. Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01isdn/gigaset: bas_gigaset locking fixTilman Schmidt1-3/+3
Unlock cs->lock before calling error_hangup() which is marked "cs->lock must not be held". Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07isdn: gigaset: use after freeDan Carpenter1-2/+4
I moved the kfree(cb) below the dereferences. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07isdn: gigaset: add missing unlockDan Carpenter1-0/+1
We should unlock here. This is the only place where we return from the function with the lock held. The caller isn't expecting it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15drivers: isdn: get rid of custom strtoul()Andy Shevchenko1-60/+20
There were two methods isdn_gethex() and isdn_getnum() which are custom implementations of strtoul(). Get rid of them in regard to strict_strtoul() kernel's function. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: gigaset307x-common@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: remove EXPERIMENTAL tag from GIGASET_CAPITilman Schmidt1-2/+2
The CAPI variant of the Gigaset drivers can, in combination with capidrv, now fully replace the legacy ISDN4Linux variant. All reported problems have been fixed. So remove the EXPERIMENTAL tag from the Kconfig option selecting it, and adapt the documentation accordingly to encourage users to switch to it. Impact: documentation/status update, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: fix leaks in error pathTilman Schmidt1-0/+2
Take care to free all previously allocated ressources in the "out of memory" error path of the ISDN_CMD_DIAL branch. Based on an original patch by Dan Carpenter. Impact: bugfix Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: reduce syslog spamTilman Schmidt1-8/+8
Downgrade some error messages which occur frequently during normal operation to debug messages. Impact: logging Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: remove obsolete compile time optionsTilman Schmidt5-18/+0
Remove compile time options in the Gigaset ISDN driver that aren't going to be changed anymore, and an obsolete FIXME comment. Impact: cleanup Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: handle Supplementary Service ListenTilman Schmidt1-1/+26
Add minimal handling for the non-optional CAPI FACILITY_REQ Supplementary Service function Listen. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: improve CAPI message debuggingTilman Schmidt1-11/+16
Provide better control of debugging output for DATA_B3 CAPI messages which tend to occur very frequently. Impact: logging Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: drop debug check on isochronous writeTilman Schmidt1-18/+0
With CONFIG_GIGASET_DEBUG set, every isochronous USB frame after an erroneous one was checked for more errors. This produced only noise messages in practice, so drop it. Impact: cleanup Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: ignore irrelevant device responsesTilman Schmidt2-56/+16
Downgrade the Gigaset driver's reaction to unknown AT responses from the device from warning to debug level, and remove the handling of some device responses which aren't relevant for the driver's operation. Impact: cleanup Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: avoid copying AT commands twiceTilman Schmidt6-134/+85
Change the Gigaset driver's internal write_cmd interface to accept a cmdbuf structure instead of a string. This avoids copying formatted AT commands a second time. Impact: optimization Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: adjust usb_gigaset tty write buffer limitTilman Schmidt1-1/+2
The usb_gigaset driver's write buffer limit was different from those of the others for no good reason. Set it to the same value, derived from the Siemens documentation. Impact: cosmetic Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI connection state storageTilman Schmidt3-53/+180
CAPI applications can handle several connections in parallel, so one connection state per application isn't sufficient. Store the connection state in the channel structure instead. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: encode HLC and BC togetherTilman Schmidt3-38/+52
Adapt to buggy device firmware which accepts setting HLC only in the same command line as BC, by encoding HLC and BC in a single command if both are specified, and rejecting HLC without BC. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI DATA_B3 Delivery ConfirmationTilman Schmidt1-32/+51
The Gigaset CAPI driver handled all DATA_B3_REQ messages as if the Delivery Confirmation flag bit was set, delaying the emission of the DATA_B3_CONF reply until the data was actually transmitted. Some CAPI applications (notably Asterisk) aren't happy with that behaviour. Change it to actually evaluate the Delivery Confirmation flag as described the CAPI specification. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI voice connection encodingTilman Schmidt1-4/+4
Make the Gigaset CAPI driver select L2_VOICE (AT^SBPR=2) as the layer 2 encoding for transparent connections, like the ISDN4Linux variant. L2_BITSYNC (AT^SBPR=0) mutes internal connections and distorts external ones. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 19:28:09 +0000