summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2022-08-18Merge tag 'irqchip-fixes-6.0-1' of ↵Thomas Gleixner5-28/+33
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - A bunch of small fixes for the recently merged LoongArch drivers - A leftover from the non-SMP IRQ affinity rework affecting the Hyper-V IOMMU code Link: https://lore.kernel.org/r/20220812125910.2227338-1-maz@kernel.org
2022-08-12irqchip/loongson-liointc: Fix an error handling path in liointc_init()Christophe JAILLET1-1/+1
All errors lead to the error handling path, except the one dealing with "reg-names" in DT. Fix it and release some resources before returning if this test fails. Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [maz: fix commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1a6d74ab70712279023aa7bdbd31bd3aec103bc0.1659382063.git.christophe.jaillet@wanadoo.fr
2022-08-09irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuseMarc Zyngier5-5/+6
The recently merged LoongArch drivers paper over the lack of topology information by creating a bunch of fwnodes for the irqchips. So far, so good. However, irq_domain_alloc_fwnode() is supposed to take a PA, and not a kernel VA blindly cast as a PA, potentially disclosing kernel VAs to userspace. In some other cases, even NULL is used as the PA, which is entertaining. Fix this by using the actual PA of the block when available, and switch to a named fwnode in the other cases. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn> Link: https://lore.kernel.org/r/20220808105020.2689757-1-maz@kernel.org
2022-08-08irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPIHuacai Chen1-19/+19
MIPS doesn't declare find_pch_pic(), which makes a build warning: >> drivers/irqchip/irq-loongson-pch-pic.c:51:5: warning: no previous prototype for function 'find_pch_pic' [-Wmissing-prototypes] int find_pch_pic(u32 gsi) ^ drivers/irqchip/irq-loongson-pch-pic.c:51:1: note: declare 'static' if the function is not intended to be used outside of this translation unit int find_pch_pic(u32 gsi) ^ static 1 warning generated. Move find_pch_pic() into CONFIG_ACPI which only used by LoongArch to fix the warning. BTW, remove the duplicated declaration of find_pch_pic() in irq.h. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220808093205.3658485-1-chenhuacai@loongson.cn
2022-08-06Merge tag 'riscv-for-linus-5.20-mw0' of ↵Linus Torvalds2-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Enabling the FPU is now a static_key - Improvements to the Svpbmt support - CPU topology bindings for a handful of systems - Support for systems with 64-bit hart IDs - Many settings have been enabled in the defconfig, including both support for the StarFive systems and many of the Docker requirements There are also a handful of cleanups and improvements, as usual. * tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits) riscv: enable Docker requirements in defconfig riscv: convert the t-head pbmt errata to use the __nops macro riscv: introduce nops and __nops macros for NOP sequences RISC-V: Add fast call path of crash_kexec() riscv: mmap with PROT_WRITE but no PROT_READ is invalid riscv/efi_stub: Add 64bit boot-hartid support on RV64 riscv: cpu: Add 64bit hartid support on RV64 riscv: smp: Add 64bit hartid support on RV64 riscv: spinwait: Fix hartid variable type riscv: cpu_ops_sbi: Add 64bit hartid support on RV64 riscv: dts: sifive: "fix" pmic watchdog node name riscv: dts: canaan: Add k210 topology information riscv: dts: sifive: Add fu740 topology information riscv: dts: sifive: Add fu540 topology information riscv: dts: starfive: Add JH7100 CPU topology RISC-V: Add CONFIG_{NON,}PORTABLE riscv: config: enable SOC_STARFIVE in defconfig riscv: dts: microchip: Add mpfs' topology information riscv: Kconfig.socs: Add comments riscv: Kconfig.erratas: Add comments ...
2022-08-05Merge tag 'asm-generic-6.0' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three independent sets of changes: - Sai Prakash Ranjan adds tracing support to the asm-generic version of the MMIO accessors, which is intended to help understand problems with device drivers and has been part of Qualcomm's vendor kernels for many years - A patch from Sebastian Siewior to rework the handling of IRQ stacks in softirqs across architectures, which is needed for enabling PREEMPT_RT - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of the code behind that, after the last users of this old interface made it in through the netdev, scsi, media and staging trees" * tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: asm-generic: fcntl: Fix typo 'the the' in comment arch/*/: remove CONFIG_VIRT_TO_BUS soc: qcom: geni: Disable MMIO tracing for GENI SE serial: qcom_geni_serial: Disable MMIO tracing for geni serial asm-generic/io: Add logging support for MMIO accessors KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM lib: Add register read/write tracing support drm/meson: Fix overflow implicit truncation warnings irqchip/tegra: Fix overflow implicit truncation warnings coresight: etm4x: Use asm-generic IO memory barriers arm64: io: Use asm-generic high level MMIO accessors arch/*: Disable softirq stacks on PREEMPT_RT.
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-04irqchip/loongson-eiointc: Fix a build warningHuacai Chen1-1/+1
Make acpi_get_vec_parent() be a static function, to avoid: drivers/irqchip/irq-loongson-eiointc.c:289:20: warning: no previous prototype for 'acpi_get_vec_parent' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220804025457.213979-1-chenhuacai@loongson.cn
2022-08-04irqchip/loongson-eiointc: Fix irq affinity settingHuacai Chen1-2/+6
In multi-node case, csr_any_send() should set EIOINTC_REG_ENABLE of the first core of target node, not the first core of the whole. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220804025421.211958-1-chenhuacai@loongson.cn
2022-08-02Merge tag 'arm-newsoc-6.0' of ↵Linus Torvalds3-0/+288
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM new SoC support from Arnd Bergmann: "This adds initial support for two SoC families that have been under review for a while. In both cases, the origonal idea was to have a minimally functional version, but we ended up leaving out the clk drivers that are still under review and will be merged through the corresponding subsystem tree. The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and based on the 32-bit NPCM7xx family but is now getting added to arch/arm64 as well. Sunplus SP7021, also known as Plus1, is a general-purpose System-in-Package design based on the 32-bit Cortex-A7 SoC on the main chip, plus an I/O chip and memory in the same" * tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE arm64: defconfig: Add Nuvoton NPCM family support arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add maintainer reset: npcm: Add NPCM8XX support dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: using syscon instead of device data ARM: dts: nuvoton: add reset syscon property dt-bindings: reset: npcm: add GCR syscon property dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-bindings: timer: npcm: Add npcm845 compatible string ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig ARM: sunplus: Add initial support for Sunplus SP7021 SoC irqchip: Add Sunplus SP7021 interrupt controller driver ...
2022-08-01Merge tag 'irq-core-2022-08-01' of ↵Linus Torvalds15-360/+1870
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for interrupt core and drivers: Core: - Fix a few inconsistencies between UP and SMP vs interrupt affinities - Small updates and cleanups all over the place New drivers: - LoongArch interrupt controller - Renesas RZ/G2L interrupt controller Updates: - Hotpath optimization for SiFive PLIC - Workaround for broken PLIC edge triggered interrupts - Simall cleanups and improvements as usual" * tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) irqchip/mmp: Declare init functions in common header file irqchip/mips-gic: Check the return value of ioremap() in gic_of_init() genirq: Use for_each_action_of_desc in actions_show() irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch irqchip: Add LoongArch CPU interrupt controller support irqchip: Add Loongson Extended I/O interrupt controller support irqchip/loongson-liointc: Add ACPI init support irqchip/loongson-pch-msi: Add ACPI init support irqchip/loongson-pch-pic: Add ACPI init support irqchip: Add Loongson PCH LPC controller support LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain LoongArch: Use ACPI_GENERIC_GSI for gsi handling genirq/generic_chip: Export irq_unmap_generic_chip ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback APCI: irq: Add support for multiple GSI domains LoongArch: Provisionally add ACPICA data structures irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains irqdomain: Report irq number for NOMAP domains irqchip/gic-v3: Fix comment typo dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC ...
2022-07-25Merge branch irq/misc-5.20 into irq/irqchip-nextMarc Zyngier2-1/+5
* irq/misc-5.20: : . : Misc IRQ changes for 5.20: : : - Let irq_set_chip_handler_name_locked() take a const struct irq_chip * : : - Convert the ocelot irq_chip to being immutable (depends on the above) : : - Tidy-up the NOMAP irqdomain API variant : : - Teach action_show() to use for_each_action_of_desc() : : - Check ioremap() return value in the MIPS GIC driver : : - Move MMP driver init function declarations into the common .h : : - The obligatory typo fixes : . irqchip/mmp: Declare init functions in common header file irqchip/mips-gic: Check the return value of ioremap() in gic_of_init() genirq: Use for_each_action_of_desc in actions_show() irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains irqdomain: Report irq number for NOMAP domains irqchip/gic-v3: Fix comment typo pinctrl: ocelot: Make irq_chip immutable genirq: Allow irq_set_chip_handler_name_locked() to take a const irq_chip Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-24irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()William Dean1-0/+4
The function ioremap() in gic_of_init() can fail, so its return value should be checked. Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: William Dean <williamsukatube@163.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220723100128.2964304-1-williamsukatube@163.com
2022-07-20Merge branch irq/loongarch into irq/irqchip-nextMarc Zyngier10-162/+1164
* irq/loongarch: : . : Merge the long awaited IRQ support for the LoongArch architecture. : : From the cover letter: : : "Currently, LoongArch based processors (e.g. Loongson-3A5000) : can only work together with LS7A chipsets. The irq chips in : LoongArch computers include CPUINTC (CPU Core Interrupt : Controller), LIOINTC (Legacy I/O Interrupt Controller), : EIOINTC (Extended I/O Interrupt Controller), PCH-PIC (Main : Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt : Controller in LS7A chipset) and PCH-MSI (MSI Interrupt Controller)." : : Note that this comes with non-official, arch private ACPICA : definitions until the official ACPICA update is realeased. : . irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch irqchip: Add LoongArch CPU interrupt controller support irqchip: Add Loongson Extended I/O interrupt controller support irqchip/loongson-liointc: Add ACPI init support irqchip/loongson-pch-msi: Add ACPI init support irqchip/loongson-pch-pic: Add ACPI init support irqchip: Add Loongson PCH LPC controller support LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain LoongArch: Use ACPI_GENERIC_GSI for gsi handling genirq/generic_chip: Export irq_unmap_generic_chip ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback APCI: irq: Add support for multiple GSI domains LoongArch: Provisionally add ACPICA data structures Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-20irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArchJianmin Lv1-0/+37
For LoongArch, ACPI_IRQ_MODEL_LPIC is introduced, and then the callback acpi_get_gsi_domain_id and acpi_gsi_to_irq_fallback are implemented. The acpi_get_gsi_domain_id callback returns related fwnode handle of irqdomain for different GSI range. The acpi_gsi_to_irq_fallback will create new mapping for gsi when the mapping of it is not found. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-14-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip: Add LoongArch CPU interrupt controller supportHuacai Chen3-0/+122
LoongArch CPUINTC stands for CSR.ECFG/CSR.ESTAT and related interrupt controller that described in Section 7.4 of "LoongArch Reference Manual, Vol 1". For more information please refer Documentation/loongarch/irq- chip-model.rst. LoongArch CPUINTC has 13 interrupt sources: SWI0~1, HWI0~7, IPI, TI (Timer) and PCOV (PMC). IRQ mappings of HWI0~7 are configurable (can be created from DT/ACPI), but IPI, TI (Timer) and PCOV (PMC) are hardcoded bits, so we expose the fwnode_handle to map them, and get mapped irq by irq_create_mapping when using them. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-13-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip: Add Loongson Extended I/O interrupt controller supportHuacai Chen3-0/+406
EIOINTC stands for "Extended I/O Interrupts" that described in Section 11.2 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Loongson-3A5000 has 4 cores per NUMA node, and each NUMA node has an EIOINTC; while Loongson-3C5000 has 16 cores per NUMA node, and each NUMA node has 4 EIOINTCs. In other words, 16 cores of one NUMA node in Loongson-3C5000 are organized in 4 groups, each group connects to an EIOINTC. We call the "group" here as an EIOINTC node, so each EIOINTC node always includes 4 cores (both in Loongson-3A5000 and Loongson- 3C5000). Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-12-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip/loongson-liointc: Add ACPI init supportHuacai Chen1-75/+128
LIOINTC stands for "Legacy I/O Interrupts" that described in Section 11.1 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-11-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip/loongson-pch-msi: Add ACPI init supportHuacai Chen2-43/+86
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in Section 5 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-10-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip/loongson-pch-pic: Add ACPI init supportHuacai Chen2-32/+147
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in Section 5 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-9-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip: Add Loongson PCH LPC controller supportHuacai Chen3-0/+214
PCH-LPC stands for "LPC Interrupts" that described in Section 24.3 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-8-git-send-email-lvjianmin@loongson.cn
2022-07-20APCI: irq: Add support for multiple GSI domainsMarc Zyngier2-12/+24
In an unfortunate departure from the ACPI spec, the LoongArch architecture split its GSI space across multiple interrupt controllers. In order to be able to reuse the core code and prevent architectures from reinventing an already square wheel, offer the arch code the ability to register a dispatcher function that will return the domain fwnode for a given GSI. The ARM GIC drivers are updated to support this (with a single domain, as intended). Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1658314292-35346-3-git-send-email-lvjianmin@loongson.cn
2022-07-19riscv: cpu: Add 64bit hartid support on RV64Sunil V L2-6/+8
The hartid can be a 64bit value on RV64 platforms. Add support for 64bit hartid in riscv_of_processor_hartid() and update its callers. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220527051743.2829940-5-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-19Merge branch irq/renesas-irqc into irq/irqchip-nextMarc Zyngier3-0/+402
* irq/renesas-irqc: : . : New Renesas RZ/G2L IRQC driver from Lad Prabhakar, equipped with : its companion GPIO driver. : . dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC gpio: thunderx: Don't directly include asm-generic/msi.h pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Document the properties to handle GPIO IRQ gpio: gpiolib: Allow free() callback to be overridden irqchip: Add RZ/G2L IA55 Interrupt Controller driver dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller gpio: Remove dynamic allocation from populate_parent_alloc_arg() Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-19irqchip/gic-v3: Fix comment typoJason Wang1-1/+1
The double `the' is duplicated in line 1786, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220715051258.28889-1-wangborong@cdjrlc.com
2022-07-10Merge tag 'irq_urgent_for_v5.19_rc6' of ↵Linus Torvalds3-12/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Gracefully handle failure to request MMIO resources in the GICv3 driver - Make a static key static in the Apple AIC driver - Fix the Xilinx intc driver dependency on OF_ADDRESS * tag 'irq_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/apple-aic: Make symbol 'use_fast_ipi' static irqchip/xilinx: Add explicit dependency on OF_ADDRESS irqchip/gicv3: Handle resource request failure consistently
2022-07-10Merge branch irq/plic-masking into irq/irqchip-nextMarc Zyngier4-67/+101
* irq/plic-masking: : . : SiFive PLIC optimisations from Samuel Holland: : : "This series removes the spinlocks and cpumask operations from the PLIC : driver's hot path. As far as I know, using the priority to mask : interrupts is an intended usage and will work on all existing : implementations. [...]" : . irqchip/sifive-plic: Separate the enable and mask operations irqchip/sifive-plic: Make better use of the effective affinity mask PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu() genirq: Provide an IRQ affinity mask in non-SMP configs genirq: Return a const cpumask from irq_data_get_affinity_mask genirq: Add and use an irq_data_update_affinity helper genirq: Refactor accessors to use irq_data_get_affinity_mask genirq: Drop redundant irq_init_effective_affinity genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMP genirq: GENERIC_IRQ_IPI depends on SMP irqchip/mips-gic: Only register IPI domain when SMP is enabled Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-10irqchip/sifive-plic: Separate the enable and mask operationsSamuel Holland1-21/+34
The PLIC has two per-IRQ checks before sending an IRQ to a hart context. First, it checks that the IRQ's priority is nonzero. Then, it checks that the enable bit is set for that combination of IRQ and context. Currently, the PLIC driver sets both the priority value and the enable bit in its (un)mask operations. However, modifying the enable bit is problematic for two reasons: 1) The enable bits are packed, so changes are not atomic and require taking a spinlock. 2) The following requirement from the PLIC spec, which explains the racy (un)mask operations in plic_irq_eoi(): If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. Both of these problems are solved by using the priority value to mask IRQs. Each IRQ has a separate priority register, so writing the priority value is atomic. And since the enable bit remains set while an IRQ is masked, the EOI operation works normally. The enable bits are still used to control the IRQ's affinity. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701202440.59059-3-samuel@sholland.org
2022-07-10irqchip/sifive-plic: Make better use of the effective affinity maskSamuel Holland2-18/+10
The PLIC driver already updates the effective affinity mask in its .irq_set_affinity callback. Take advantage of that information to only touch bits (and take spinlocks) for the specific relevant hart contexts. First, make sure the effective affinity mask is set before IRQ startup. Then, since this mask already takes priv->lmask into account, checking that mask later is no longer needed (and handler->present is equivalent to the bit being set in priv->lmask). Finally, when (un)masking or changing affinity, only clear/set the enable bits in the specific old/new context(s). The cpumask operations in plic_irq_unmask() are not needed because they duplicate the code in plic_set_affinity(). Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701202440.59059-2-samuel@sholland.org
2022-07-10Merge branch irq/affinity-nosmp into irq/plic-maskingMarc Zyngier3-37/+66
* irq/affinity-nosmp: : . : non-SMP IRQ affinity fixes courtesy of Samuel Holland: : : "This series solves some inconsistency with how IRQ affinity masks are : handled between SMP and non-SMP configurations. : : In non-SMP configs, an IRQ's true affinity is always cpumask_of(0), so : irq_{,data_}get_affinity_mask now return that, instead of returning an : uninitialized per-IRQ cpumask. This change makes iterating over the : affinity mask do the right thing in both SMP and non-SMP configurations. : : To accomplish that: : - patches 1-3 disable some library code that was broken anyway on !SMP : - patches 4-7 refactor the code so that irq_{,data_}get_affinity_mask : can return a const cpumask, since that is what cpumask_of provides : - patch 8 drops the per-IRQ cpumask and replaces it with cpumask_of(0)" : . PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu() genirq: Provide an IRQ affinity mask in non-SMP configs genirq: Return a const cpumask from irq_data_get_affinity_mask genirq: Add and use an irq_data_update_affinity helper genirq: Refactor accessors to use irq_data_get_affinity_mask genirq: Drop redundant irq_init_effective_affinity genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMP genirq: GENERIC_IRQ_IPI depends on SMP irqchip/mips-gic: Only register IPI domain when SMP is enabled Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-10Merge branch irq/stm32-exti-updates into irq/irqchip-nextMarc Zyngier1-126/+124
* irq/stm32-exti-updates: : . : stm32-exti updates courtesy of Antonio Borneo: : : "This series address some code fix for irq-stm32-exti driver and : simplifies the table that remaps the interrupts from exti to gic." : : Also comes with an additional change to irq_chip_request_resources_parent(), : making it possible to omit the callback in hierarchies. : . irqchip/stm32-exti: Simplify irq description table irqchip/stm32-exti: Read event trigger type from event_trg register irqchip/stm32-exti: Tag emr register as undefined for stm32mp15 irqchip/stm32-exti: Prevent illegal read due to unbounded DT value irqchip/stm32-exti: Fix irq_mask/irq_unmask for direct events irqchip/stm32-exti: Fix irq_set_affinity return value genirq: Don't return error on missing optional irq_request_resources() Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-10irqchip: Add RZ/G2L IA55 Interrupt Controller driverLad Prabhakar3-0/+402
Add a driver for the Renesas RZ/G2L Interrupt Controller. This supports external pins being used as interrupts. It supports one line for NMI, 8 external pins and 32 GPIO pins (out of 123) to be used as IRQ lines. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220707182314.66610-4-prabhakar.mahadev-lad.rj@bp.renesas.com
2022-07-08irqchip: Add Sunplus SP7021 interrupt controller driverQin Jian3-0/+288
Add interrupt controller driver for Sunplus SP7021 SoC. This is the interrupt controller in P-chip which collects all interrupt sources in P-chip and routes them to parent interrupt controller in C-chip. Signed-off-by: Qin Jian <qinjian@cqplus1.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-07genirq: Add and use an irq_data_update_affinity helperSamuel Holland1-2/+2
Some architectures and irqchip drivers modify the cpumask returned by irq_data_get_affinity_mask, usually by copying in to it. This is problematic for uniprocessor configurations, where the affinity mask should be constant, as it is known at compile time. Add and use a setter for the affinity mask, following the pattern of irq_data_update_effective_affinity. This allows the getter function to return a const cpumask pointer. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Xen bits Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701200056.46555-7-samuel@sholland.org
2022-07-07genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMPSamuel Holland1-7/+7
An IRQ's effective affinity can only be different from its configured affinity if there are multiple CPUs. Make it clear that this option is only meaningful when SMP is enabled. Most of the relevant code in irqdesc.c is already hidden behind CONFIG_SMP anyway. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701200056.46555-4-samuel@sholland.org
2022-07-07genirq: GENERIC_IRQ_IPI depends on SMPSamuel Holland1-1/+1
The generic IPI code depends on the IRQ affinity mask being allocated and initialized. This will not be the case if SMP is disabled. Fix up the remaining driver that selected GENERIC_IRQ_IPI in a non-SMP config. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701200056.46555-3-samuel@sholland.org
2022-07-07irqchip/mips-gic: Only register IPI domain when SMP is enabledSamuel Holland2-27/+56
The MIPS GIC irqchip driver may be selected in a uniprocessor configuration, but it unconditionally registers an IPI domain. Limit the part of the driver dealing with IPIs to only be compiled when GENERIC_IRQ_IPI is enabled, which corresponds to an SMP configuration. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701200056.46555-2-samuel@sholland.org
2022-07-07irqchip/stm32-exti: Simplify irq description tableAntonio Borneo1-119/+101
Having removed the event trigger type from struct stm32_desc_irq makes worthless keep using a struct. Replace the struct by a single dimension array and use 8 bit type to reduce the overal memory footprint. On armv7a this patch reduces by 7% the size of the driver, from text data bss dec hex filename 6977 424 4 7405 1ced irq-stm32-exti.o to 6449 424 4 6877 1add irq-stm32-exti.o Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220606162757.415354-7-antonio.borneo@foss.st.com
2022-07-07irqchip/stm32-exti: Read event trigger type from event_trg registerAntonio Borneo1-84/+96
The flag reporting whether an event is 'direct' or 'configurable' is available in the read-only registers EVENT_TRG. Drop this redundant information from the struct stm32_desc_irq and use the proper bit from EVENT_TRG register. On armv7a this patch reduces by 3% the size of the driver, from text data bss dec hex filename 7233 424 4 7661 1ded irq-stm32-exti.o to 6977 424 4 7405 1ced irq-stm32-exti.o Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220606162757.415354-6-antonio.borneo@foss.st.com
2022-07-07irqchip/stm32-exti: Tag emr register as undefined for stm32mp15Alexandre Torgue1-4/+5
The reference manual RM0436 of stm32mp15 till version v4.0 was erroneously reporting the Event Mask Registers (EMR) for the Cortex-A CPUs. These registers have been removed from v5.0 of the manual and the corresponding offsets have been marked as 'Reserved'. Prevent accessing these reserved addresses by tagging the EMR offsets as UNDEF_REG and modifying the code to handle this case. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220606162757.415354-5-antonio.borneo@foss.st.com
2022-07-07irqchip/stm32-exti: Prevent illegal read due to unbounded DT valueAntonio Borneo1-0/+3
The value hwirq is received from DT. If it exceeds the maximum valid value it causes the code to address unexisting irq chips reading outside the array boundary. Check the value of hwirq before using it. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220606162757.415354-4-antonio.borneo@foss.st.com
2022-07-07irqchip/stm32-exti: Fix irq_mask/irq_unmask for direct eventsLoic Pallardy1-2/+2
The driver has to mask/unmask the corresponding flag in the Interrupt Mask Register (IMR). This is already done for configurable event, while direct events only forward the mask/unmask request to the parent. Use the existing stm32_exti_h_mask()/stm32_exti_h_unmask() for direct events too. Signed-off-by: Loic Pallardy <loic.pallardy@foss.st.com> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220606162757.415354-3-antonio.borneo@foss.st.com
2022-07-07irqchip/stm32-exti: Fix irq_set_affinity return valueLudovic Barre1-1/+1
When there is no parent, there is no specific action to do in stm32-exti irqchip. In such case, it's incorrect returning an error. Let irq_set_affinity to return IRQ_SET_MASK_OK_DONE when there is no parent. Signed-off-by: Ludovic Barre <ludovic.barre@foss.st.com> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220606162757.415354-2-antonio.borneo@foss.st.com
2022-07-01irqchip/sifive-plic: Fix T-HEAD PLIC edge trigger handlingSamuel Holland1-1/+1
The T-HEAD PLIC ignores additional edges seen while an edge-triggered interrupt is being handled. Because of this behavior, the driver needs to complete edge-triggered interrupts in the .irq_ack callback before handling them, instead of in the .irq_eoi callback afterward. Otherwise, it could miss some interrupts. Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220630100241.35233-5-samuel@sholland.org
2022-07-01irqchip/sifive-plic: Add support for Renesas RZ/Five SoCLad Prabhakar1-4/+74
The Renesas RZ/Five SoC has a RISC-V AX45MP AndesCore with NCEPLIC100. The NCEPLIC100 supports both edge-triggered and level-triggered interrupts. In case of edge-triggered interrupts NCEPLIC100 ignores the next interrupt edge until the previous completion message has been received and NCEPLIC100 doesn't support pending interrupt counter, hence losing the interrupts if not acknowledged in time. So the workaround for edge-triggered interrupts to be handled correctly and without losing is that it needs to be acknowledged first and then handler must be run so that we don't miss on the next edge-triggered interrupt. This patch adds a new compatible string for NCEPLIC100 (from Andes Technology) interrupt controller found on Renesas RZ/Five SoC and adds quirk bits to priv structure and implements PLIC_QUIRK_EDGE_INTERRUPT quirk to change the interrupt flow. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220630100241.35233-3-samuel@sholland.org
2022-07-01irqchip/apple-aic: Make symbol 'use_fast_ipi' staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/irqchip/irq-apple-aic.c:231:1: warning: symbol 'use_fast_ipi' was not declared. Should it be static? This symbol is not used outside of irq-apple-aic.c, so marks it static. Fixes: 2cf68211664a ("irqchip/apple-aic: Add Fast IPI support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220618072824.562350-1-weiyongjun1@huawei.com
2022-07-01irqchip/xilinx: Add explicit dependency on OF_ADDRESSJamie Iles1-1/+1
Commit b84dc7f0e364 ("irqchip/xilinx: Remove microblaze+zynq dependency") relaxed the dependencies on the Xilinx interrupt controller to be OF only, but some OF architectures (s390 for example) do not support OF_ADDRESS and so a build of the driver will result in undefined references to of_iomap/iounmap and friends. Fixes: b84dc7f0e364 ("irqchip/xilinx: Remove microblaze+zynq dependency") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220630111008.3838307-1-jamie@jamieiles.com
2022-06-28irqchip: or1k-pic: Undefine mask_ack for level triggered hardwareStafford Horne1-1/+0
The mask_ack operation clears the interrupt by writing to the PICSR register. This we don't want for level triggered interrupt because it does not actually clear the interrupt on the source hardware. This was causing issues in qemu with multi core setups where interrupts would continue to fire even though they had been cleared in PICSR. Just remove the mask_ack operation. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-06-16irqchip/gicv3: Handle resource request failure consistentlyRobin Murphy1-10/+31
Due to a silly oversight on my part, making the simple switch to of_io_request_and_map() in the DT path inadvertently introduced divergent behaviour, whereby failng to request an iomem region now becomes fatal for DT, vs. being silently ignored for ACPI. Refactor a bit harder, so that request errors are non-fatal in both paths as intended, but also consistently reported as well. Reported-by: Matt Ranostay <mranostay@ti.com> Fixes: 2b2cd74a06c3 ("irqchip/gic-v3: Claim iomem resources") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/5f2b57a0131f3082fae9d3002d360bf784ccb092.1655387206.git.robin.murphy@arm.com
2022-06-15irqchip/tegra: Fix overflow implicit truncation warningsSai Prakash Ranjan1-5/+5
Fix -Woverflow warnings for tegra irqchip driver which is a result of moving arm64 custom MMIO accessor macros to asm-generic function implementations giving a bonus type-checking now and uncovering these overflow warnings. drivers/irqchip/irq-tegra.c: In function ‘tegra_ictlr_suspend’: drivers/irqchip/irq-tegra.c:151:18: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); ^ Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 17:12:56 +0000