summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches1-1/+1
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-1331/+0
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds3-0/+105
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-13memblock: implement for_each_reserved_mem_region() using __next_mem_region()Mike Rapoport1-1/+1
Iteration over memblock.reserved with for_each_reserved_mem_region() used __next_reserved_mem_region() that implemented a subset of __next_mem_region(). Use __for_each_mem_range() and, essentially, __next_mem_region() with appropriate parameters to reduce code duplication. While on it, rename for_each_reserved_mem_region() to for_each_reserved_mem_range() for consistency. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-10Merge branch 'irq/mstar' into irq/irqchip-nextMarc Zyngier3-0/+208
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-10irqchip/irq-mst: Add MStar interrupt controller supportMark-PK Tsai3-0/+208
Add MStar interrupt controller support using hierarchy irq domain. Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Daniel Palmer <daniel@thingy.jp> Link: https://lore.kernel.org/r/20200902063344.1852-2-mark-pk.tsai@mediatek.com
2020-10-10Merge branch 'irq/irqchip-fixes' into irq/irqchip-nextMarc Zyngier3-6/+6
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-06Merge branch 'irq/qcom-pdc-wakeup' into irq/irqchip-nextMarc Zyngier1-2/+12
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-06irqchip/qcom-pdc: Reset PDC interrupts during initMaulik Shah1-1/+10
Kexec can directly boot into a new kernel without going to complete reboot. This can leave the previous kernel's configuration for PDC interrupts as is. Clear previous kernel's configuration during init by setting interrupts in enable bank to zero. The IRQs specified in qcom,pdc-ranges property are the only ones that can be used by the new kernel so clear only those IRQs. The remaining ones may be in use by a different kernel and should not be set by new kernel. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-7-git-send-email-mkshah@codeaurora.org
2020-10-06irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flagMaulik Shah1-1/+2
Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag to enable/unmask the wakeirqs during suspend entry. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-6-git-send-email-mkshah@codeaurora.org
2020-09-28Merge branch 'irq/ipi-as-irq', remote-tracking branches 'origin/irq/dw' and ↵Marc Zyngier4-12/+431
'origin/irq/owl' into irq/irqchip-next Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-25irqchip: Add Actions Semi Owl SIRQ controllerCristian Ciocaltea2-0/+360
This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700 and S900) and provides support for handling up to 3 external interrupt lines. Each line can be independently configured as interrupt and triggers on either of the edges or either of the levels. Additionally, each line can also be masked individually. Co-developed-by: Parthiban Nallathambi <pn@denx.de> Co-developed-by: Saravanan Sekar <sravanhome@gmail.com> Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1a010ef0eb78831b5657d74a0fcdef7a8efb2ec4.1600114378.git.cristian.ciocaltea@gmail.com
2020-09-25irqchip/dw-apb-ictl: Add primary interrupt controller supportZhen Lei2-9/+65
Add support to use dw-apb-ictl as primary interrupt controller. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> [maz: minor fixups] Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Haoyu Lv <lvhaoyu@huawei.com> Link: https://lore.kernel.org/r/20200924071754.4509-4-thunder.leizhen@huawei.com
2020-09-25irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domainsZhen Lei1-8/+11
Add the required abstractions that will help introducing hierarchical domain support to the dw-apb-ictl driver. No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> [maz: commit message, some cleanups] Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Haoyu Lv <lvhaoyu@huawei.com> Link: https://lore.kernel.org/r/20200924071754.4509-3-thunder.leizhen@huawei.com
2020-09-24irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without ↵Jonathan Cameron1-1/+6
processor or memory Note this crash is present before any of the patches in this series, but as explained below it is highly unlikely anyone is shipping a firmware that causes it. Tests were done using an overriden SRAT. On ARM64, the gic-v3 driver directly parses SRAT to locate GIC Interrupt Translation Service (ITS) Affinity Structures. This is done much later in the boot than the parses of SRAT which identify proximity domains. As a result, an ITS placed in a proximity domain that is not defined by another SRAT structure will result in a NUMA node that is not completely configured and a crash. ITS [mem 0x202100000-0x20211ffff] ITS@0x0000000202100000: Using ITS number 0 Unable to handle kernel paging request at virtual address 0000000000001a08 ... Call trace: __alloc_pages_nodemask+0xe8/0x338 alloc_pages_node.constprop.0+0x34/0x40 its_probe_one+0x2f8/0xb18 gic_acpi_parse_madt_its+0x108/0x150 acpi_table_parse_entries_array+0x17c/0x264 acpi_table_parse_entries+0x48/0x6c acpi_table_parse_madt+0x30/0x3c its_init+0x1c4/0x644 gic_init_bases+0x4b8/0x4ec gic_acpi_init+0x134/0x264 acpi_match_madt+0x4c/0x84 acpi_table_parse_entries_array+0x17c/0x264 acpi_table_parse_entries+0x48/0x6c acpi_table_parse_madt+0x30/0x3c __acpi_probe_device_table+0x8c/0xe8 irqchip_init+0x3c/0x48 init_IRQ+0xcc/0x100 start_kernel+0x33c/0x548 ACPI 6.3 allows any set of Affinity Structures in SRAT to define a proximity domain. However, as we do not see this crash, we can conclude that no firmware is currently placing an ITS in a node that is separate from those containing memory and / or processors. We could modify the SRAT parsing behavior to identify the existence of Proximity Domains unique to the ITS structures, and handle them as a special case of a generic initiator (once support for those merges). This patch avoids the complexity that would be needed to handle this corner case, by not allowing the ITS entry parsing code to instantiate new NUMA Nodes. If one is encountered that does not already exist, then NO_NUMA_NODE is assigned and a warning printed just as if the value had been greater than allowed NUMA Nodes. "SRAT: Invalid NUMA node -1 in ITS affinity" Whilst this does not provide the full flexibility allowed by ACPI, it does fix the problem. We can revisit a more sophisticated solution if needed by future platforms. Change is simply to replace acpi_map_pxm_to_node with pxm_to_node reflecting the fact a new mapping is not created. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-17Merge remote-tracking branch 'origin/irq/gic-retrigger' into irq/irqchip-nextMarc Zyngier3-2/+28
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/ipi-as-irq' into irq/irqchip-nextMarc Zyngier6-312/+548
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/gic-v3-nmi-ns' into irq/irqchip-nextMarc Zyngier1-14/+46
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/dev_err_probe' into irq/irqchip-nextMarc Zyngier4-26/+12
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/misc-5.10' into irq/irqchip-nextMarc Zyngier1-2/+2
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Cleanup Franken-GIC handlingMarc Zyngier1-29/+12
Introduce a static key identifying Samsung's unique creation, allowing to replace the indirect call to compute the base addresses with a simple test on the static key. Faster, cheaper, negative diffstat. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Provide mask/unmask dummy methods for IPIsMarc Zyngier1-0/+2
Although it doesn't seem possible to disable individual mailbox interrupts, we still need to provide some callbacks. Fixes: 09eb672ce4fb ("irqchip/bcm2836: Configure mailbox interrupts as standard interrupts") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/armada-370-xp: Configure IPIs as standard interruptsMarc Zyngier1-84/+178
To introduce IPIs as standard interrupts to the Armada 370-XP driver, let's allocate a completely separate irqdomain and irqchip combo that lives parallel to the "standard" one. This effectively should be modelled as a chained interrupt controller, but the code is in such a state that it is pretty hard to shoehorn, as it would require the rewrite of the MSI layer as well. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/hip04: Configure IPIs as standard interruptsMarc Zyngier1-49/+40
In order to switch the hip04 driver to provide standard interrupts for IPIs, rework the way interrupts are allocated, making sure the irqdomain covers the SGIs as well as the rest of the interrupt range. The driver is otherwise so old-school that it creates all interrupts upfront (duh!), so there is hardly anything else to change, apart from communicating the IPIs to the arch code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Configure mailbox interrupts as standard interruptsMarc Zyngier1-26/+125
In order to switch the bcm2836 driver to privide standard interrupts for IPIs, it first needs to stop lying about the way things work. The mailbox interrupt is actually a multiplexer, with enough bits to store 32 pending interrupts per CPU. So let's turn it into a chained irqchip. Once this is done, we can instanciate the corresponding IPIs, and pass them to the architecture code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic-common: Don't enable SGIs by defaultMarc Zyngier1-3/+0
The architecture code now enables the IPIs as required, so no need to enable SGIs by default in the GIC code. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Configure SGIs as standard interruptsMarc Zyngier1-41/+87
Change the way we deal with GIC SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Refactor SMP configurationMarc Zyngier1-36/+40
As we are about to change quite a lot of the SMP support code, let's start by moving it around so that it minimizes the amount of #ifdefery. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic-v3: Configure SGIs as standard interruptsMarc Zyngier1-43/+51
Change the way we deal with GICv3 SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip: Add sl28cpld interrupt controller supportMichael Walle3-0/+105
Add support for the interrupt controller inside the sl28 CPLD management controller. The interrupt controller can handle at most 8 interrupts and is really simplistic and consists only of an interrupt mask and an interrupt pending register. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCsSuman Anna2-1/+10
The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP, commonly called ICSSG. The PRUSS INTC present within the ICSSG supports more System Events (160 vs 64), more Interrupt Channels and Host Interrupts (20 vs 10) compared to the previous generation PRUSS INTC instances. The first 2 and the last 10 of these host interrupt lines are used by the PRU and other auxiliary cores and sub-modules within the ICSSG, with 8 host interrupts connected to MPU. The host interrupts 5, 6, 7 are also connected to the other ICSSG instances within the SoC and can be partitioned as per system integration through the board dts files. Enhance the PRUSS INTC driver to add support for this ICSSG INTC instance. Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Implement irq_{get, set}_irqchip_state opsDavid Lechner1-0/+40
This implements the irq_get_irqchip_state and irq_set_irqchip_state callbacks for the TI PRUSS INTC driver. The set callback can be used by drivers to "kick" a PRU by injecting a PRU system event. Co-developed-by: Suman Anna <s-anna@ti.com> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Reviewed-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Add logic for handling reserved interruptsSuman Anna1-5/+24
The PRUSS INTC has a fixed number of output interrupt lines that are connected to a number of processors or other PRUSS instances or other devices (like DMA) on the SoC. The output interrupt lines 2 through 9 are usually connected to the main Arm host processor and are referred to as host interrupts 0 through 7 from ARM/MPU perspective. All of these 8 host interrupts are not always exclusively connected to the Arm interrupt controller. Some SoCs have some interrupt lines not connected to the Arm interrupt controller at all, while a few others have the interrupt lines connected to multiple processors in which they need to be partitioned as per SoC integration needs. For example, AM437x and 66AK2G SoCs have 2 PRUSS instances each and have the host interrupt 5 connected to the other PRUSS, while AM335x has host interrupt 0 shared between MPU and TSC_ADC and host interrupts 6 & 7 shared between MPU and a DMA controller. Add logic to the PRUSS INTC driver to ignore both these shared and invalid interrupts. Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interruptsGrzegorz Jaszczyk3-0/+607
The Programmable Real-Time Unit Subsystem (PRUSS) contains a local interrupt controller (INTC) that can handle various system input events and post interrupts back to the device-level initiators. The INTC can support upto 64 input events with individual control configuration and hardware prioritization. These events are mapped onto 10 output interrupt lines through two levels of many-to-one mapping support. Different interrupt lines are routed to the individual PRU cores or to the host CPU, or to other devices on the SoC. Some of these events are sourced from peripherals or other sub-modules within that PRUSS, while a few others are sourced from SoC-level peripherals/devices. The PRUSS INTC platform driver manages this PRUSS interrupt controller and implements an irqchip driver to provide a Linux standard way for the PRU client users to enable/disable/ack/re-trigger a PRUSS system event. The system events to interrupt channels and output interrupts relies on the mapping configuration provided either through the PRU firmware blob (for interrupts routed to PRU cores) or via the PRU application's device tree node (for interrupt routed to the main CPU). In the first case the mappings will be programmed on PRU remoteproc driver demand (via irq_create_fwspec_mapping) during the boot of a PRU core and cleaned up after the PRU core is stopped. Reference counting is used to allow multiple system events to share a single channel and to allow multiple channels to share a single host event. The PRUSS INTC module is reference counted during the interrupt setup phase through the irqchip's irq_request_resources() and irq_release_resources() ops. This restricts the module from being removed as long as there are active interrupt users. The driver currently supports and can be built for OMAP architecture based AM335x, AM437x and AM57xx SoCs; Keystone2 architecture based 66AK2G SoCs and Davinci architecture based OMAP-L13x/AM18x/DA850 SoCs. All of these SoCs support 64 system events, 10 interrupt channels and 10 output interrupt lines per PRUSS INTC with a few SoC integration differences. NOTE: Each PRU-ICSS's INTC on AM57xx SoCs is preceded by a Crossbar that enables multiple external events to be routed to a specific number of input interrupt events. Any non-default external interrupt event directed towards PRUSS needs this crossbar to be setup properly. Co-developed-by: Suman Anna <s-anna@ti.com> Co-developed-by: Andrew F. Davis <afd@ti.com> Co-developed-by: Roger Quadros <rogerq@ti.com> Co-developed-by: David Lechner <david@lechnology.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson2-1331/+0
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13irqchip: Kconfig: Update description for RENESAS_IRQC configLad Prabhakar1-2/+2
irq-renesas-irqc driver is also used on Renesas RZ/G{1,2} SoC's, update the same to reflect the description for RENESAS_IRQC config. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200911100439.19878-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2020-09-13irqchip/gic-v3: Support pseudo-NMIs when SCR_EL3.FIQ == 0Alexandru Elisei1-12/+44
The GIC's internal view of the priority mask register and the assigned interrupt priorities are based on whether GIC security is enabled and whether firmware routes Group 0 interrupts to EL3. At the moment, we support priority masking when ICC_PMR_EL1 and interrupt priorities are either both modified by the GIC, or both left unchanged. Trusted Firmware-A's default interrupt routing model allows Group 0 interrupts to be delivered to the non-secure world (SCR_EL3.FIQ == 0). Unfortunately, this is precisely the case that the GIC driver doesn't support: ICC_PMR_EL1 remains unchanged, but the GIC's view of interrupt priorities is different from the software programmed values. Support pseudo-NMIs when SCR_EL3.FIQ == 0 by using a different value to mask regular interrupts. All the other values remain the same. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200912153707.667731-3-alexandru.elisei@arm.com
2020-09-13irqchip/gic-v3: Spell out when pseudo-NMIs are enabledAlexandru Elisei1-2/+2
When NMIs cannot be enabled, the driver prints a message stating that unambiguously. When they are enabled, the only feedback we get is a message regarding the use of synchronization for ICC_PMR_EL1 writes, which is not as useful for a user who is not intimately familiar with how NMIs are implemented. Let's make it obvious that pseudo-NMIs are enabled. Keep the message about using a barrier for ICC_PMR_EL1 writes, because it has a non-negligible impact on performance. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200912153707.667731-2-alexandru.elisei@arm.com
2020-09-13irqchip/imx-irqsteer: Use dev_err_probe() to simplify error handlingAnson Huang1-6/+3
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1597126576-18383-2-git-send-email-Anson.Huang@nxp.com
2020-09-13irqchip/imx-intmux: Use dev_err_probe() to simplify error handlingAnson Huang1-6/+3
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1597126576-18383-1-git-send-email-Anson.Huang@nxp.com
2020-09-13irqchip/ti-sci: Simplify with dev_err_probe()Krzysztof Kozlowski2-14/+6
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. There is also no need to assign NULL to 'intr->sci' as it is part of devm-allocated memory. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200902174615.24695-1-krzk@kernel.org
2020-09-13irqchip/gic-v3: Describe the SGI rangeMarc Zyngier1-3/+15
As we are about to start making use of SGIs in a more conventional way, let's describe it is the GICv3 list of interrupt types. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-13irqchip/loongson-htvec: Fix initial interrupt clearingHuacai Chen1-2/+2
In htvec_reset() only the first group of initial interrupts is cleared. This sometimes causes spurious interrupts, so let's clear all groups. While at it, fix the nearby comment that to match the reality of what the driver does. Fixes: 818e915fbac518e8c78e1877 ("irqchip: Add Loongson HyperTransport Vector support") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1599819978-13999-2-git-send-email-chenhc@lemote.com
2020-09-13irqchip/ti-sci-intr: Fix unsigned comparison to zeroYueHaibing1-2/+2
ti_sci_intr_xlate_irq() return -ENOENT on fail, p_hwirq should be int type. Fixes: a5b659bd4bc7 ("irqchip/ti-sci-intr: Add support for INTR being a parent to INTR") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20200826035321.18620-1-yuehaibing@huawei.com
2020-09-13irqchip/ti-sci-inta: Fix unsigned comparison to zeroYueHaibing1-2/+2
ti_sci_inta_xlate_irq() return -ENOENT on fail, p_hwirq should be int type. Fixes: 5c4b585d2910 ("irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20200826035430.21060-1-yuehaibing@huawei.com
2020-09-06irqchip/gic-v2, v3: Prevent SW resends entirelyValentin Schneider2-2/+9
The GIC irqchips can now use a HW resend when a retrigger is invoked by check_irq_resend(). However, should the HW resend fail, check_irq_resend() will still attempt to trigger a SW resend, which is still a bad idea for the GICs. Prevent this from happening by setting IRQD_HANDLE_ENFORCE_IRQCTX on all GIC IRQs. Technically per-cpu IRQs do not need this, as their flow handlers never set IRQS_PENDING, but this aligns all IRQs wrt context enforcement: this also forces all GIC IRQ handling to happen in IRQ context (as defined by in_irq()). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-3-valentin.schneider@arm.com
2020-09-06irqchip/git-v3-its: Implement irq_retrigger callback for device-triggered LPIsMarc Zyngier1-0/+6
It is pretty easy to provide a retrigger callback for the ITS, as it we already have the required support in terms of irq_set_irqchip_state(). Note that this only works for device-generated LPIs, and not the GICv4 doorbells, which should never have to be retriggered anyway. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-06irqchip/gic-v2, v3: Implement irq_chip->irq_retrigger()Valentin Schneider2-0/+13
While digging around IRQCHIP_EOI_IF_HANDLED and irq/resend.c, it has come to my attention that the IRQ resend situation seems a bit precarious for the GIC(s). When marking an IRQ with IRQS_PENDING, handle_fasteoi_irq() will bail out and issue an irq_eoi(). Should the IRQ in question be re-enabled, check_irq_resend() will trigger a SW resend, which will go through the flow handler again and issue *another* irq_eoi() on the *same* IRQ activation. This is something the GIC spec clearly describes as a bad idea: any EOI must match a previous ACK. Implement irq_chip.irq_retrigger() for the GIC chips by setting the GIC pending bit of the relevant IRQ. After being called by check_irq_resend(), this will eventually trigger a *new* interrupt which we will handle as usual. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-2-valentin.schneider@arm.com
2020-08-30Merge tag 'irq-urgent-2020-08-30' of ↵Linus Torvalds9-93/+190
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Revert the platform driver conversion of interrupt chip drivers as it turned out to create more problems than it solves. - Fix a trivial typo in the new module helpers which made probing reliably fail. - Small fixes in the STM32 and MIPS Ingenic drivers - The TI firmware rework which had badly managed dependencies and had to wait post rc1" * tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Leave parent IRQ unmasked on suspend irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers arm64: dts: k3-am65: Update the RM resource types arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent. irqchip/ti-sci-intr: Add support for INTR being a parent to INTR dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent firmware: ti_sci: Add support for getting resource with subtype firmware: ti_sci: Drop unused structure ti_sci_rm_type_map firmware: ti_sci: Drop the device id to resource type translation