summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2017-09-25irqchip/mips-gic: Use effective affinity to unmaskPaul Burton1-2/+5
Commit 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") adjusted the way we handle masking interrupts to set & clear the interrupt's bit in each pcpu_mask. This allows us to avoid needing to read the GIC mask registers and perform a bitwise and of their values with the pending & pcpu_masks. Unfortunately this didn't quite work for IPIs, which were mapped to a particular CPU/VP during initialisation but never set the affinity or effective_affinity fields of their struct irq_desc. This led to them losing their affinity when gic_unmask_irq() was called for them, and they'd all become affine to cpu0. Fix this by: 1) Setting the effective affinity of interrupts in gic_shared_irq_domain_map(), which is where we actually map an interrupt to a CPU/VP. This ensures that the effective affinity mask is always valid, not just after explicitly setting affinity. 2) Using an interrupt's effective affinity when unmasking it, which prevents gic_unmask_irq() from unintentionally changing which pcpu_mask includes an interrupt. Fixes: 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20170922062440.23701-3-paul.burton@imgtec.com
2017-09-25irqchip/mips-gic: Fix shifts to extract register fieldsPaul Burton1-3/+3
The MIPS GIC driver is incorrectly using __fls to shift registers, intending to shift to the least significant bit of a value based upon its mask but instead shifting off all but the value's top bit. It should actually be using __ffs to shift to the first, not last, bit of the value. Apparently the system I used when testing commit 3680746abd87 ("irqchip: mips-gic: Convert remaining shared reg access to new accessors") and commit b2b2e584ceab ("irqchip: mips-gic: Clean up mti, reserved-cpu-vectors handling") managed to work correctly despite this issue, but not all systems do... Fixes: 3680746abd87 ("irqchip: mips-gic: Convert remaining shared reg access to new accessors") Fixes: b2b2e584ceab ("irqchip: mips-gic: Clean up mti, reserved-cpu-vectors handling") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20170922062440.23701-2-paul.burton@imgtec.com
2017-09-19irqchip.mips-gic: Fix shared interrupt mask writesPaul Burton1-3/+3
The write_gic_smask() & write_gic_rmask() functions take a shared interrupt number as a parameter, but we're incorrectly providing them a bitmask with the shared interrupt's bit set. This effectively means that we mask or unmask the shared interrupt 1<<n rather than shared interrupt n, and as a result likely drop interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 68898c8765f4 ("irqchip: mips-gic: Drop gic_(re)set_mask() functions") Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-19irqchip/gic-v4: Fix building with ancient gccArnd Bergmann1-3/+9
gcc-4.5 and earlier don't like named initializers for anonymous union members: drivers/irqchip/irq-gic-v4.c: In function 'its_map_vlpi': drivers/irqchip/irq-gic-v4.c:176:3: error: unknown field 'map' specified in initializer drivers/irqchip/irq-gic-v4.c:176:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:176:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c: In function 'its_get_vlpi': drivers/irqchip/irq-gic-v4.c:192:3: error: unknown field 'map' specified in initializer drivers/irqchip/irq-gic-v4.c:192:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:192:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c: In function 'its_prop_update_vlpi': drivers/irqchip/irq-gic-v4.c:208:3: error: unknown field 'config' specified in initializer drivers/irqchip/irq-gic-v4.c:208:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:208:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c:208:3: error: initialization makes pointer from integer without a cast This is fairly easy to work around, by using extra curly braces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-19irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()zijun_hu1-4/+4
get_cpu_number() doesn't use existing helper to iterate over possible CPUs, It will cause an error in case of discontinuous @cpu_possible_mask such as 0b11110001, which can result from a core having failed to come up on a SMP machine. Fixed by using existing helper for_each_possible_cpu(). Signed-off-by: zijun_hu <zijun_hu@htc.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds2-436/+182
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds31-241/+2266
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt subsystem delivers this time: - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support - Initial GIC-V4 support - Consolidation of the FSL MSI support - Utilize the effective affinity interface in various ARM irqchip drivers - Yet another interrupt chip driver (UniPhier AIDET) - Bulk conversion of the irq chip driver to use %pOF - The usual small fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) irqchip/ls-scfg-msi: Add MSI affinity support irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support irqchip/ls-scfg-msi: Add LS1046a MSI support arm64: dts: ls1046a: Add MSI dts node arm64: dts: ls1043a: Share all MSIs arm: dts: ls1021a: Share all MSIs arm64: dts: ls1043a: Fix typo of MSI compatible string arm: dts: ls1021a: Fix typo of MSI compatible string irqchip/ls-scfg-msi: Fix typo of MSI compatible strings irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask irqchip/mmp: Make mmp_intc_conf const irqchip/gic: Make irq_chip const irqchip/gic-v3: Advertise GICv4 support to KVM irqchip/gic-v4: Enable low-level GICv4 operations irqchip/gic-v4: Add some basic documentation irqchip/gic-v4: Add VLPI configuration interface irqchip/gic-v4: Add VPE command interface irqchip/gic-v4: Add per-VM VPE domain creation irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared ...
2017-09-04irqchip: mips-gic: Let the core set struct irq_common_data affinityPaul Burton1-2/+1
gic_set_affinity() manually copies the provided cpumask to the struct irq_common_data affinity field, returning IRQ_SET_MASK_OK_NOCOPY in order to prevent the core code from doing that. We can instead simply let the core code do it for us, by returning IRQ_SET_MASK_OK instead of IRQ_SET_MASK_OK_NOCOPY & doing the copy ourselves. [ralf@linux-mips.org: Resolve merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17056/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Use cpumask_first_and() in gic_set_affinity()Paul Burton1-6/+6
Currently in gic_set_affinity() we calculate a temporary cpumask holding the intersection of the provided cpumask & the CPUs that are online, then we call cpumask_first twice on it to find the first such CPU. Since we don't need the temporary cpumask for anything else & we only care about the first CPU that's both online & in the provided cpumask, we can instead use cpumask_first_and to find that CPU & drop the temporary mask. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17110/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Clean up mti, reserved-cpu-vectors handlingPaul Burton1-7/+7
When parsing mti,reserved-cpu-vectors we generate a mask of all bits that have been declared reserved, the loop through starting from bit 2 to find one that isn't reserved (ie. is zero). This patch accomplishes the same task more simply by: - Inititialising the reserved mask to 0x3 (ie. the 2 software interrupts). This means we don't need to skip them later as the loop previously has. - Replacing the loop checking for zero bits with find_first_zero_bit, which fits our needs now that the 2 software interrupts are marked reserved. This requires that the type of reserved is changed to unsigned long so that it's suitable for use with bitmap functions. - Replacing the magic number 8 with the hamming weight of the ST0_IM field - ie. the number of bits that a MIPS CPU has for interrupt inputs. This is still a compile-time constant 8, but makes it clearer why it's 8. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17054/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*Paul Burton1-21/+31
This patch avoids the need to read the GIC_SH_MASK* registers when decoding shared interrupts by setting & clearing the interrupt's bit in the appropriate CPU's pcpu_masks entry when masking or unmasking the interrupt. This effectively means that whilst an interrupt is masked we clear its bit in all pcpu_masks, which causes gic_handle_shared_int() to ignore it on all CPUs without needing to check GIC_SH_MASK*. In essence, we add a little overhead to masking or unmasking interrupts but in return reduce the overhead of the far more common task of decoding interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17109/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Make pcpu_masks a per-cpu variablePaul Burton1-9/+8
Define the pcpu_masks variable using the kernel's standard per-cpu variable support, rather than an open-coded array of structs containing bitmaps. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17052/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Inline gic_basic_init()Paul Burton1-27/+19
gic_basic_init() is now a fairly short function that is only called in one place. Inline it into gic_of_init() to help readability. [ralf@linux-mips.org: Resolved conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17051/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Inline __gic_init()Paul Burton1-60/+55
The __gic_init() function is only called from gic_of_init() now that the non-DT path has been removed. In order to simplify the code & aid readability, fold __gic_init() into gic_of_init(). This provides us with the ability to return an error code, which __gic_init() was previously unable to do. As such the irq_domain_add_*() error paths are modified to print & return an error rather than panic(). [ralf@linux-mips.org: Resoled reject.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17050/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Move gic_get_c0_*_int() to asm/mips-gic.hPaul Burton1-1/+0
The linux/irqchip/mips-gic.h header is now almost empty. Move the declarations of gic_get_c0_compare_int(), gic_get_c0_perfcount_int() & gic_get_c0_fdc_int() to asm/mips-gic.h in order to close in on being able to delete the former header. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17046/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_presentPaul Burton1-2/+0
Nothing uses the global gic_present variable anymore; mips_gic_present() should be used instead. Remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17045/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_init()Paul Burton1-7/+0
All in-tree platforms now probe the GIC driver using device tree, and as such nothing calls gic_init() any longer. Remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17043/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove __gic_irq_dispatch() forward declarationPaul Burton1-2/+0
We provide a forward declaration of the __gic_irq_dispatch() function for no apparent reason. Remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17042/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_get_usm_range()Paul Burton1-14/+0
The MIPS VDSO code is no longer reliant upon the irqchip driver to provide the address of the GIC's user-visible section via gic_get_usm_range(). Remove the now-dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17041/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Move various definitions to the driverPaul Burton1-0/+16
Move the definitions of macros used to convert between hardware IRQ numbers & shared or local interrupt numbers into the irqchip driver, which is all that should ever need to care about them. Remove GIC_CPU_TO_VEC_OFFSET() in the process since it's never used. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17039/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Convert remaining local reg access to new accessorsPaul Burton1-56/+12
Convert the remaining accesses to registers in the GIC VP-local & VP-other register blocks to use the new accessor functions provided by asm/mips-gic.h, resulting in code which is often shorter & easier to read. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17036/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Convert local int mask access to new accessorsPaul Burton1-7/+7
Use the new accessor functions provided by asm/mips-gic.h to access masks controlling local interrupts, resulting in code which is often shorter & easier to read. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17035/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Convert remaining shared reg access to new accessorsPaul Burton1-8/+8
Convert the remaining accesses to registers in the GIC shared register block to use the new accessor functions provided by asm/mips-gic.h, resulting in code which is often shorter & easier to read. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17034/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_map_to_vpe()Paul Burton1-9/+2
Remove the gic_map_to_vpe() function in favour of using the new write_gic_map_vp() accessor function which isn't any more complex to use & allows us to drop a level of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_map_to_pin()Paul Burton1-7/+1
Remove the gic_map_to_pin() function in favour of using the new write_gic_map_pin() accessor function which isn't any more complex to use & allows us to drop a level of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17032/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_set_dual_edge()Paul Burton1-23/+5
Remove the gic_set_dual_edge() function in favour of using the new change_gic_dual() accessor function which provides equivalent functionality. This also allows us to remove the gic_update_bits() function which gic_set_dual_edge() was the last user of, along with the GIC_INTR_OFS() & GIC_INTR_BIT() macros. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17031/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_set_trigger()Paul Burton1-13/+6
Remove the gic_set_trigger() function in favour of using the new change_gic_trig() accessor function which provides equivalent functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17030/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_set_polarity()Paul Burton1-12/+5
Remove the gic_set_polarity() function in favour of using the new change_gic_pol() accessor function which provides equivalent functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17029/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Drop gic_(re)set_mask() functionsPaul Burton1-15/+3
The gic_set_mask() & gic_reset_mask() functions are now no more convenient to call than the write_gic_smask() or write_gic_rmask() accessor functions. Remove the layer of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17028/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Simplify gic_local_irq_domain_map()Paul Burton1-41/+16
Simplify gic_local_irq_domain_map() by: - Moving the check for invalid IRQs outside of the loop. - Moving the decision about whether to use gic_cpu_pin or timer_cpu_pin outside of the loop. - Using the new write_gic_vo_map() accessor function to avoid the need to handle each map register separately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17027/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Simplify shared interrupt pending/mask readsPaul Burton1-18/+11
Simplify the reads of the bitmaps indicating pending & masked interrupts in gic_handle_shared_int() using the __ioread32_copy() & __ioread64_copy() helper functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17026/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_read_local_vp_id()Paul Burton1-8/+0
Nothing needs gic_read_local_vp_id() any longer, so remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17024/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove counter access functionsPaul Burton1-95/+0
The MIPS GIC clocksource driver is no longer using the accessor functions provided by the irqchip driver, so remove them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-31Merge tag 'irqchip-4.14' of ↵Thomas Gleixner25-236/+2219
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.14 from Marc Zyngier: - irqchip-specific part of the monster GICv4 series - new UniPhier AIDET irqchip driver - new variants of some Freescale MSI widget - blanket removal of of_node->full_name in printk - random collection of fixes
2017-08-31irqchip/ls-scfg-msi: Add MSI affinity supportMinghuan Lian1-5/+63
For LS1046a and LS1043a v1.1, the MSI controller has 4 MSIRs and 4 GIC SPI interrupts which can be associated with different Core. So we can support affinity to improve the performance. The MSI message data is a byte for Layerscape MSI. 7 6 5 4 3 2 1 0 | - | IBS | SRS | SRS bit0-1 is to select a MSIR which is associated with a CPU. IBS bit2-6 of ls1046, bit2-4 of ls1043a v1.1 is to select bit of the MSIR. With affinity, only bits of MSIR0(srs=0 cpu0) are available. All other bits of the MSIR1-3(cpu1-3) are reserved. The MSI hwirq always equals bit index of the MSIR0. When changing affinity, MSI message data will be appended corresponding SRS then MSI will be moved to the corresponding core. But in affinity mode, there is only 8 MSI interrupts for a controller of LS1043a v1.1. It cannot meet the requirement of the some PCIe devices such as 4 ports Ethernet card. In contrast, without affinity, all MSIRs can be used for core 0, the MSI interrupts can up to 32. So the parameter is added to control affinity mode. "lsmsi=no-affinity" will disable affinity and increase MSI interrupt number. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI supportMinghuan Lian1-6/+39
A MSI controller of LS1043a v1.0 only includes one MSIR and is assigned one GIC interrupt. In order to support affinity, LS1043a v1.1 MSI is assigned 4 MSIRs and 4 GIC interrupts. But the MSIR has the different offset and only supports 8 MSIs. The bits between variable bit_start and bit_end in structure ls_scfg_msir are used to show 8 MSI interrupts. msir_irqs and msir_base are added to describe the difference of MSI between LS1043a v1.1 and other SoCs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/ls-scfg-msi: Add LS1046a MSI supportMinghuan Lian1-35/+130
LS1046a includes 4 MSIRs, each MSIR is assigned a dedicate GIC SPI interrupt and provides 32 MSI interrupts. Compared to previous MSI, LS1046a's IBS(interrupt bit select) shift is changed to 2 and total MSI interrupt number is changed to 128. The patch adds structure 'ls_scfg_msir' to describe MSIR setting and 'ibs_shift' to store the different value between the SoCs. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/ls-scfg-msi: Fix typo of MSI compatible stringsMinghuan Lian1-2/+4
The patch is to fix typo of the Layerscape SCFG MSI dts compatible strings. "1" is replaced by "l". Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_maskFlorian Fainelli1-6/+4
Initialization of irq_fwd_mask was done using __raw_writel() which happens to work for all cases except when using ARM BE8 which requires writel() (with the proper swapping). Move the initialization of the irq_fwd_mask till later when we have correctly defined our I/O accessors. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/mmp: Make mmp_intc_conf constBhumika Goyal1-2/+2
Make these const as they are only used during a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct mmp_intc_conf s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct mmp_intc_conf s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic: Make irq_chip constBhumika Goyal1-1/+1
Make this const as it is only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3: Advertise GICv4 support to KVMMarc Zyngier1-0/+2
As KVM needs to know about the availability of GICv4 to enable direct injection of interrupts, let's advertise the feature in the gic_kvm_info structure. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v4: Enable low-level GICv4 operationsMarc Zyngier3-2/+16
Get the show on the road... Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v4: Add some basic documentationMarc Zyngier1-0/+71
Do a braindump of the way things are supposed to work. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v4: Add VLPI configuration interfaceMarc Zyngier1-0/+42
Add the required interfaces to map, unmap and update a VLPI. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v4: Add VPE command interfaceMarc Zyngier1-0/+25
Add the required interfaces to schedule a VPE and perform a VINVALL command. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v4: Add per-VM VPE domain creationMarc Zyngier1-0/+74
When creating a VM, it is very convenient to have an irq domain containing all the doorbell interrupts associated with that VM (each interrupt representing a VPE). Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Set implementation defined bit to enable VLPIsMarc Zyngier1-2/+5
A long time ago, GITS_CTLR[1] used to be called GITC_CTLR.EnableVLPI. It has been subsequently deprecated and is now an "Implementation Defined" bit that may ot may not be set for GICv4. Brilliant. And the current crop of the FastModel requires that bit for VLPIs to be enabled. Oh well... Let's set it and find out what breaks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Allow doorbell interrupts to be injected/clearedMarc Zyngier1-0/+31
While the doorbell interrupts are usually driven by the HW itself, having a way to trigger them independently has proved to be a really useful debug feature. As it is actually very little code, let's add it to the VPE irqchip operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Move pending doorbell after VMOVPMarc Zyngier1-2/+32
After moving a VPE from a redistributor to another, we're still left with a potential pending doorbell interrupt on the old redistributor. That interrupt should be moved to the new one to be either cleared or take, depending on what the hypervisor wishes to do. So let's move it right after having execited VMOVP. This doesn't add much cost in the !DirectLPI case (we trade a DISCARD for a MOVI), and the cost of the DIRECTLPI case should be minimal (two extra MMIO accesses). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 16:11:59 +0000