summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2013-11-14Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-3/+148
Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-12Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-12/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ changes from Ingo Molnar: "The biggest change this cycle are the softirq/hardirq stack interaction and nesting fixes, cleanups and reorganizations from Frederic. This is the longer followup story to the softirq nesting fix that is already upstream (commit ded797547548: "irq: Force hardirq exit's softirq processing on its own stack")" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro powerpc: Tell about irq stack coverage x86: Tell about irq stack coverage irq: Optimize softirq stack selection in irq exit irq: Justify the various softirq stack choices irq: Improve a bit softirq debugging irq: Optimize call to softirq on hardirq exit irq: Consolidate do_softirq() arch overriden implementations x86/irq: Correct comment about i8259 initialization
2013-11-11Merge tag 'dt-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
2013-11-07irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macroAxel Lin1-12/+10
This patch converts irq-bcm2835 driver to use the new IRQCHIP_DECLARE and irqchip_init. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-09-30irqchip: armada-370-xp: implement MSI supportThomas Petazzoni1-1/+181
This commit introduces the support for the MSI interrupts in the armada-370-xp interrupt controller driver. It registers an MSI chip to the MSI chip registry, which will be used by the Marvell PCIe host controller driver. The MSI interrupts use the 16 high doorbells, and are therefore notified using IRQ1 of the main interrupt controller. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30irqchip: armada-370-xp: properly request resourcesThomas Petazzoni1-4/+16
Instead of using of_iomap(), we now use of_address_to_resource(), request_mem_region() and ioremap(). This allows the corresponding I/O regions to be properly requested and visible in /proc/iomem. The main motivation for this change is that the introduction of the MSI support requires us to get the physical address of the main interrupt controller registers, so we will need the corresponding 'struct resource' anyway. We also take this opportunity to change a panic() to BUG_ON(), in order to be consistent with the rest of the driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Daniel Price <daniel.price@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-23ARM: GIC: interface to send a SGI directlyNicolas Pitre1-0/+14
The regular gic_raise_softirq() takes as input a CPU mask which is not adequate when we need to send an IPI to a CPU which is not represented in the kernel to GIC mapping. That is the case with the b.L switcher when GIC migration to the inbound CPU has not yet occurred. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23ARM: GIC: function to retrieve the physical address of the SGIRNicolas Pitre1-0/+29
In order to have early assembly code signal other CPUs in the system, we need to get the physical address for the SGIR register used to send IPIs. Because the register will be used with a precomputed CPU interface ID number, there is no need for any locking in the assembly code where this register is written to. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-17Merge branch 'iks_for_rmk' of git://git.linaro.org/people/nico/linux into ↵Russell King1-3/+105
devel-stable Nicolas Pitre writes: This is the first part of the patch series adding IKS (In-Kernel Switcher) support for big.LITTLE system architectures. This consists of the core patches only. Extra patches to come later will introduce various optimizations and tracing support. Those patches were posted on the list a while ago here: http://news.gmane.org/group/gmane.linux.ports.arm.kernel/thread=253942
2013-09-17irqchip: vic: Parse interrupt and resume masks from device treeTomasz Figa1-1/+6
This patch extends vic_of_init to parse valid interrupt sources and resume sources masks from device tree. If mask values are not specified in device tree, all sources are assumed to be valid, as before this patch. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-09-09Merge tag 'late-for-linus' of ↵Linus Torvalds2-0/+496
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ...
2013-09-09Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver update from Kevin Hilman: "This contains the ARM SoC related driver updates for v3.12. The only thing this cycle are core PM updates and CPUidle support for ARM's TC2 big.LITTLE development platform" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()
2013-09-09Merge tag 'metag-for-v3.12' of ↵Linus Torvalds3-0/+505
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull metag architecture changes from James Hogan: - Device tree updates for TZ1090 GPIO drivers merged via GPIO tree. - Add driver for ImgTec PDC irqchip as found in TZ1090 SoC. - Add linux-metag mailing list to MAINTAINERS file. * tag 'metag-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: irq-imgpdc: add ImgTec PDC irqchip driver MAINTAINERS: add linux-metag mailing list metag: tz1090: instantiate gpio-tz1090-pdc metag: tz1090: select and instantiate gpio-tz1090 metag: tz1090: select and instantiate irq-imgpdc
2013-09-06Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-43/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-08-29Merge tag 'mmp-irq' of ↵Olof Johansson2-0/+496
git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into late/all From Haojian Zhuang: Move irq driver out of mach-mmp to support multiplatform * tag 'mmp-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux: irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver
2013-08-29irqchip: sirf: move from legacy mode to linear irqdomainBarry Song1-8/+10
the series of patches for irqdomain core in 3.11 has broken sirf irq which uses legacy mapping. all users fail in the new kernel while setupping irq. this patch moves to linear irqdomain and drop old legacy irqdomain codes since we don't need it any more, and at the same time, it also fixes the broken interrupts of sirfsoc in 3.11. on the other hand, we actually only have 64 interrupt sources for prima2 and atlas6, but there are 128 interrupt souces for marco which uses GIC. in the legacy codes, sirf gpio also uses legacy irqdomain, so to make gpio interrupt mapping not depend on the prima2/atlas6/marco an use unified marco,we enlarge prima2/atlas6 interrupt number to 128. here we don't need this workaround any more as sirf gpio also moved to linear mode before. so we move SIRFSOC_NUM_IRQS back to 64 too. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-28drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()Nicolas Pitre1-0/+6
When processors are about to hit low power states, the assertion of standbywfi signal, triggered by the wfi instruction, is essential to entering low power modes. If an IRQ is pending on the processor at the time wfi is issued, the wfi instruction completes and the processor restarts execution without asserting the standbywfi signal. Depending on the platform power controller HW this behaviour can be acceptable or not; if this behaviour must be prevented software should be provided with a way to disable the routing of interrupts to the core IRQ pins. On systems where raw GIC distributor interrupts are connected to the power controller as wake-up events (hence the power controller still senses IRQs and can wake up cores upon IRQ pending), the GIC CPU interface can be disabled on power down, so that the GIC CPU IF output is gated and wfi cannot complete, thereby preventing the standbywfi issue. This patch adds a simple function to the GIC driver that allows to disable the GIC CPU IF from power down procedures. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [rewrote commit log] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-24irqchip: mmp: avoid to include irqs head fileHaojian Zhuang1-24/+21
Since <mach/irqs.h> in irq-mmp.c blocks the multiplatform build, remove it instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-08-24ARM: mmp: avoid to include head file in mach-mmpHaojian Zhuang1-14/+1
pxa910_set_wake() & mmp2_set_wake() are both declared in head files of arch/arm/mach-mmp/include/mach directory. If we include these head files in irq-mmp driver, it blocks the multiplatform build. So adjust the code. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-08-24irqchip: mmp: support irqchipHaojian Zhuang1-115/+165
Support IRQCHIP & CONFIG_MULTI_IRQ_HANDLER in irq-mmp driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Daniel Drake <dsd@laptop.org>
2013-08-24irqchip: move mmp irq driverHaojian Zhuang2-0/+462
Move irq-mmp driver from mach-mmp directory into irqchip directory. It's used to support multiple platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-08-22Merge tag 'samsung-cleanup-1' of ↵Kevin Hilman1-43/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup From Kukjin Kim: samsung cleanup for v3.12 - cleanup non-dt stuff in exynos - remove 0x from exynos dt files - remove unused codes * tag 'samsung-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() ARM: dts: Remove '0x's from Exynos5440 DTS file ARM: dts: Remove '0x's from Exynos5420 DTS file ARM: dts: Remove '0x's from Exynos5250 DTS file ARM: dts: Remove '0x's from Exynos4x12 DTSI file ARM: dts: Remove '0x's from Exynos4210 DTSI file ARM: EXYNOS: Cleanup common.h file irqchip: exynos: cleanup non-DT stuff in exynos-combiner Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-21irq-imgpdc: add ImgTec PDC irqchip driverJames Hogan3-0/+505
Add irqchip driver for the ImgTec PowerDown Controller (PDC) as found in the TZ1090. The PDC has a number of general system wakeup (SysWake) interrupts (which would for example be connected to a power button or an external peripheral), and a number of peripheral interrupts which can also wake the system but are connected straight to specific low-power peripherals (such as RTC or Infrared). It has a single interrupt output for SysWakes, and individual interrupt outputs for each peripheral. The driver demuxes the SysWake interrupt line, and passes the peripheral interrupts straight through. It also handles the set_wake interrupt operation to enable/disable the appropriate wake event bits. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: linux-metag@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
2013-07-30ARM: bL_switcher: do not hardcode GIC IDs in the codeNicolas Pitre1-0/+21
Currently, GIC IDs are hardcoded making the code dependent on the 4+4 b.L configuration. Let's allow for GIC IDs to be discovered upon switcher initialization to support other b.L configurations such as the 1+1 one, or 2+3 as on the VExpress TC2. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-07-30ARM: gic: add CPU migration supportNicolas Pitre1-3/+84
This is required by the big.LITTLE switcher code. The gic_migrate_target() changes the CPU interface mapping for the current CPU to redirect SGIs to the specified interface, and it also updates the target CPU for each interrupts to that CPU interface if they were targeting the current interface. Finally, pending SGIs for the current CPU are forwarded to the new interface. Because Linux does not use it, the SGI source information for the forwarded SGIs is not preserved. Neither is the source information for the SGIs sent by the current CPU to other CPUs adjusted to match the new CPU interface mapping. The required registers are banked so only the target CPU could do it. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-07-16irqchip: exynos: cleanup non-DT stuff in exynos-combinerKukjin Kim1-43/+1
For EXYNOS SoCs, only can support for DT so removes non-DT stuff in exynos-combiner. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-14clocksource+irqchip: delete __cpuinit usage from all related filesPaul Gortmaker1-4/+4
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/clocksource and drivers/irqchip uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-13Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds5-4/+124
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: - core fix for missing round up in the generic irq chip implementation - new irq chip for MOXA SoCs - a few fixes and cleanups in the irqchip drivers * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Add support for MOXA ART SoCs genirq: generic chip: Use DIV_ROUND_UP to calculate numchips irqchip: nvic: Fix wrong num_ct argument for irq_alloc_domain_generic_chips() irqchip: sun4i: Staticize sun4i_irq_ack() irqchip: vt8500: Staticize local symbols
2013-07-05irqchip: Add support for MOXA ART SoCsJonas Jensen2-0/+118
This patch adds an irqchip driver for the main interrupt controller found on MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Cc: grant.likely@secretlab.ca Cc: thomas.petazzoni@free-electrons.com Cc: arnd@arndb.de Cc: u.kleine-koenig@pengutronix.de Cc: linux@arm.linux.org.uk Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1372941531-6393-1-git-send-email-jonas.jensen@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-05irqchip: nvic: Fix wrong num_ct argument for irq_alloc_domain_generic_chips()Axel Lin1-1/+1
The third parameter of irq_alloc_domain_generic_chips() is the number of irq_chip_type instances associated with these chips rather than numbanks. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: kernel@pengutronix.de Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-05irqchip: sun4i: Staticize sun4i_irq_ack()Axel Lin1-1/+1
sun4i_irq_ack() is only referenced in this file, so make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1373010070.14756.2.camel@phoenix Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-05irqchip: vt8500: Staticize local symbolsAxel Lin1-2/+4
This driver is converted to use IRQCHIP_DECLARE and irqchip_init. vt8500_handle_irq() and vt8500_irq_init() are only referenced in this file, so make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Olof Johansson <olof@lixom.net> Link: http://lkml.kernel.org/r/1372995229.4038.1.camel@phoenix Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-02Merge branch 'irq-core-for-linus' of ↵Linus Torvalds6-4/+526
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq changes from Ingo Molnar: "The main changes: - generic-irqchip driver additions, cleanups and fixes - 3 new irqchip drivers: ARMv7-M NVIC, TB10x and Marvell Orion SoCs - irq_get_trigger_type() simplification and cross-arch cleanup - various cleanups, simplifications - documentation updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) softirq: Use _RET_IP_ genirq: Add the generic chip to the genirq docbook genirq: generic-chip: Export some irq_gc_ functions genirq: Fix can_request_irq() for IRQs without an action irqchip: exynos-combiner: Staticize combiner_init irqchip: Add support for ARMv7-M NVIC irqchip: Add TB10x interrupt controller driver irqdomain: Use irq_get_trigger_type() to get IRQ flags MIPS: octeon: Use irq_get_trigger_type() to get IRQ flags arm: orion: Use irq_get_trigger_type() to get IRQ flags mfd: stmpe: use irq_get_trigger_type() to get IRQ flags mfd: twl4030-irq: Use irq_get_trigger_type() to get IRQ flags gpio: mvebu: Use irq_get_trigger_type() to get IRQ flags genirq: Add irq_get_trigger_type() to get IRQ flags genirq: Irqchip: document gcflags arg of irq_alloc_domain_generic_chips genirq: Set irq thread to RT priority on creation irqchip: Add support for Marvell Orion SoCs genirq: Add kerneldoc for irq_disable. genirq: irqchip: Add mask to block out invalid irqs genirq: Generic chip: Add linear irq domain support ...
2013-07-02Merge tag 'dt-for-linus' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree changes from Arnd Bergmann: "These changes from 30 individual branches for the most part update device tree files, but there are also a few source code changes that have crept in this time, usually in order to atomically move over a driver from using hardcoded data to DT probing. A number of platforms change their DT files to use the C preprocessor, which is causing a bit of churn, but that is hopefully only this once" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits) ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string ARM: Kirkwood: Fix the internal register ranges translation ARM: dts: bcm281xx: change comment to C89 style ARM: mmc: bcm281xx SDHCI driver (dt mods) ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support arm: mvebu: enable mini-PCIe connectors on Armada 370 RD ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ...
2013-07-02Merge tag 'fixes-non-critical-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann: "These are various bug fixes that were not considered important enough for merging into 3.10. The majority of the ARM fixes are for the OMAP and at91 platforms, and there is another set of bug fixes for device drivers that resolve 'randconfig' build errors and that the subsystem maintainers either did not pick up or preferred to get merged through the arm-soc tree." * tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: at91/PMC: use at91_usb_rate() for UTMI PLL ARM: at91/PMC: fix at91sam9n12 USB FS init ARM: at91/PMC: at91sam9n12 family has a PLLB ARM: at91/PMC: sama5d3 family doesn't have a PLLB ARM: tegra: fix section mismatch in tegra_pmc_parse_dt ARM: mxs: don't select HAVE_PWM ARM: mxs: stub out mxs_pm_init for !CONFIG_PM cpuidle: calxeda: select ARM_CPU_SUSPEND ARM: mvebu: fix length of ethernet registers in mv78260 dtsi ARM: at91: cpuidle: Fix target_residency ARM: at91: fix at91_extern_irq usage for non-dt boards ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change X.509: do not emit any informational output mtd: omap2: allow bulding as a module [SCSI] nsp32: use mdelay instead of large udelay constants hwrng: bcm2835: fix MODULE_LICENSE tag ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED ARM: at91: Fix link breakage when !CONFIG_PHYLIB MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES ...
2013-06-28irqchip: exynos-combiner: Staticize combiner_initSachin Kamat1-4/+4
combiner_init() is referenced only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: kgene.kim@samsung.com Cc: t.figa@samsung.com Cc: arnd@arndb.de Cc: patches@linaro.org Link: http://lkml.kernel.org/r/1372246597-32323-2-git-send-email-sachin.kamat@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-26irqchip: Add support for ARMv7-M NVICUwe Kleine-König3-0/+123
This interrupt controller is integrated in all Cortex-M3 and Cortex-M4 machines. Support for this controller appeared in Catalin's Cortex tree based on 2.6.33 but was nearly completely rewritten. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-arm-kernel@lists.infradead.org Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: kernel@pengutronix.de Link: http://lkml.kernel.org/r/1372231128-11802-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-25irqchip: Add TB10x interrupt controller driverChristian Ruppert3-0/+201
The SOC interrupt controller driver for the Abilis Systems TB10x series of SOCs based on ARC700 CPUs. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: devicetree-discuss@lists.ozlabs.org Link: http://lkml.kernel.org/r/1372177797-9458-1-git-send-email-christian.ruppert@abilis.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "These are two fixes that came in this week, one for a regression we introduced in 3.10 in the GIC interrupt code, and the other one fixes a typo in newly introduced code" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
2013-06-21Merge tag 'renesas-dt2-for-v3.11' of ↵Arnd Bergmann1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Second Round of Renesas ARM-based SoC DT updates for v3.11 * Increased DT coverage for renesas-intc-irqpin by Guennadi Liakhovetski * Clean up of address format used in sh73a0 dtsi file by Guennadi Liakhovetski * tag 'renesas-dt2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: shmobile: sh73a0: remove "0x" prefix from DT node names irqchip: renesas-intc-irqpin: DT binding for sense bitfield width Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN caseShawn Guo1-1/+1
Commit c011470 (irqchip: gic: Perform the gic_secondary_init() call via CPU notifier) moves gic_secondary_init() that used to be called in .smp_secondary_init hook into a notifier call. But it changes the system behavior a little bit. Before the commit, gic_cpu_init() is called not only when kernel brings up the secondary cores but also when system resuming procedure hot-plugs the cores back to kernel. While after the commit, the function will not be called in the latter case, where the 'action' will not be CPU_STARTING but CPU_STARTING_FROZEN. This behavior difference at least causes the following suspend/resume regression on imx6q. $ echo mem > /sys/power/state PM: Syncing filesystems ... done. PM: Preparing system for mem sleep mmc1: card e624 removed Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 5.930 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.343 msecs PM: noirq suspend of devices complete after 0.828 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17) Task dump for CPU 1: swapper/1 R running 0 0 1 0x00000000 Backtrace: [<bf895ff4>] (0xbf895ff4) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <8007ccdc> Task dump for CPU 2: swapper/2 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <00000002> Task dump for CPU 3: swapper/3 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Fix the regression by checking 'action' being CPU_STARTING_FROZEN to have gic_cpu_init() called for secondary cores when system resumes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19ARM: shmobile: irqpin: add a DT property to enable masking on parentGuennadi Liakhovetski1-2/+5
To disable spurious interrupts, that get triggered on certain hardware, the irqpin driver masks them on the parent interrupt controller. To specify such broken devices a .control_parent parameter can be provided in the platform data. In the DT case we need a property, to do the same. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-18irqchip: renesas-intc-irqpin: DT binding for sense bitfield widthGuennadi Liakhovetski1-0/+4
Most Renesas irqpin controllers have 4-bit sense fields, however, some have different widths. This patch adds a DT binding to optionally specify such non-standard values. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-14Merge tag 'omap-for-v3.11/fixes-non-critical-signed' of ↵Olof Johansson3-12/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical From Tony Lindgren: Non-critical fixes for omaps for v3.11 merge window. * tag 'omap-for-v3.11/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap-usb-host: Fix memory leaks ARM: OMAP2+: Fix serial init for device tree based booting arm/omap: use const char properly ARM: OMAP2+: devices: Do not print error when dss_hdmi hwmod lookup fails ARM: OMAP2+: devices: Do not print error when DMIC hwmod lookup fails ARM: OMAP2+: devices: Do not print error when McPDM hwmod lookup fails ARM: OMAP: add vdds_sdi supply for omapdss_sdi.0 ARM: OMAP: add vdds_dsi supply for omapdss_dpi.0 ARM: OMAP: fix dsi regulator names + Linux 3.10-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11irqchip: Add support for Marvell Orion SoCsSebastian Hesselbarth3-0/+198
This patch adds an irqchip driver for the main interrupt controller found on Marvell Orion SoCs (Kirkwood, Dove, Orion5x, Discovery Innovation). Corresponding device tree documentation is also added. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: John Stultz <john.stultz@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1370536034-23956-2-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-08Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2-2/+2
Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
2013-06-08irqchip: Return -EPERM for reserved IRQsGrant Likely2-2/+2
The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-06irqchip: renesas-irqc: Fix irqc_probe error handlingAxel Lin1-2/+2
The code in goto err3 path is wrong because it will call fee_irq() with k == 0, which means it does free_irq(p->irq[-1].requested_irq, &p->irq[-1]); Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-03ARM: mxs: icoll: Fix interrupts gpio bank 0Markus Pargmann1-10/+4
The mxs interrupt controller does not support polling for interrupts, but the driver still does it, which is a relict from pre-MULTI_IRQ_HANDLER times. The existing code assumes that 0x7f means no interrupt, but this value is an actually valid irq number, namely gpio bank 0's irq. This results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. This patch removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-07Merge tag 'multiplatform-for-linus-2' of ↵Linus Torvalds1-61/+64
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM Exynos multiplatform changes from Arnd Bergmann: "These continue the multiplatform support for exynos, adding support for building most of the essential drivers (clocksource, clk, irqchip) when combined with other platforms. As a result, it should become really easy to add full multiplatform exynos support in 3.11, although we don't yet enable it for 3.10. The changes were not included in the earlier multiplatform series in order to avoid clashes with the other Exynos updates. This also includes work from Tomasz Figa to fix the pwm clocksource code on Exynos, which is not strictly required for multiplatform, but related to the other patches in this set and needed as a bug fix for at least one board." * tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver irqchip: exynos: look up irq using irq_find_mapping irqchip: exynos: pass irq_base from platform irqchip: exynos: localize irq lookup for ATAGS irqchip: exynos: allocate combiner_data dynamically irqchip: exynos: pass max combiner number to combiner_init ARM: exynos: add missing properties for combiner IRQs ...