summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds10-139/+733
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
2019-11-28Merge branch 'pci/misc'Bjorn Helgaas2-0/+2
- Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) * pci/misc: drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/amdgpu: Correct Transmit Margin masks PCI: Add #defines for Enter Compliance, Transmit Margin PCI: Allow building PCIe things without PCIEPORTBUS PCI: Remove PCIe Kconfig dependencies on PCI PCI/ASPM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove spurious "d" from granularity message PCI: sysfs: Remove unused attribute groups x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect PCI: Remove unused includes and superfluous struct declaration x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y x86/PCI: Correct SPDX comment style x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
2019-11-27Merge tag 'riscv/for-v5.5-rc1' of ↵Linus Torvalds1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: "New features: - SECCOMP support - nommu support - SBI-less system support - M-Mode support - TLB flush optimizations Other improvements: - Pass the complete RISC-V ISA string supported by the CPU cores to userspace, rather than redacting parts of it in the kernel - Add platform DMA IP block data to the HiFive Unleashed board DT file - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image compression formats, in line with other architectures Cleanups: - Remove unnecessary PTE_PARENT_SIZE macro - Standardize include guard naming across arch/riscv" * tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) riscv: provide a flat image loader riscv: add nommu support riscv: clear the instruction cache and all registers when booting riscv: read the hart ID from mhartid on boot riscv: provide native clint access for M-mode riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00 riscv: add support for MMIO access to the timer registers riscv: implement remote sfence.i using IPIs riscv: cleanup the default power off implementation riscv: poison SBI calls for M-mode riscv: don't allow selecting SBI based drivers for M-mode RISC-V: Add multiple compression image format. riscv: clean up the macro format in each header file riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE riscv: abstract out CSR names for supervisor vs machine mode riscv: separate MMIO functions into their own header file riscv: enter WFI in default_power_off() if SBI does not shutdown RISC-V: Issue a tlb page flush if possible RISC-V: Issue a local tlbflush if possible. RISC-V: Do not invoke SBI call if cpumask is empty ...
2019-11-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+6
Pull KVM updates from Paolo Bonzini: "ARM: - data abort report and injection - steal time support - GICv4 performance improvements - vgic ITS emulation fixes - simplify FWB handling - enable halt polling counters - make the emulated timer PREEMPT_RT compliant s390: - small fixes and cleanups - selftest improvements - yield improvements PPC: - add capability to tell userspace whether we can single-step the guest - improve the allocation of XIVE virtual processor IDs - rewrite interrupt synthesis code to deliver interrupts in virtual mode when appropriate. - minor cleanups and improvements. x86: - XSAVES support for AMD - more accurate report of nested guest TSC to the nested hypervisor - retpoline optimizations - support for nested 5-level page tables - PMU virtualization optimizations, and improved support for nested PMU virtualization - correct latching of INITs for nested virtualization - IOAPIC optimization - TSX_CTRL virtualization for more TAA happiness - improved allocation and flushing of SEV ASIDs - many bugfixes and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints KVM: x86: Grab KVM's srcu lock when setting nested state KVM: x86: Open code shared_msr_update() in its only caller KVM: Fix jump label out_free_* in kvm_init() KVM: x86: Remove a spurious export of a static function KVM: x86: create mmu/ subdirectory KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page KVM: x86: remove set but not used variable 'called' KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID KVM: x86: do not modify masked bits of shared MSRs KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT KVM: x86: Unexport kvm_vcpu_reload_apic_access_page() KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1 KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization ...
2019-11-25Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Apart from the arm64-specific bits (core arch and perf, new arm64 selftests), it touches the generic cow_user_page() (reviewed by Kirill) together with a macro for x86 to preserve the existing behaviour on this architecture. Summary: - On ARMv8 CPUs without hardware updates of the access flag, avoid failing cow_user_page() on PFN mappings if the pte is old. The patches introduce an arch_faults_on_old_pte() macro, defined as false on x86. When true, cow_user_page() makes the pte young before attempting __copy_from_user_inatomic(). - Covert the synchronous exception handling paths in arch/arm64/kernel/entry.S to C. - FTRACE_WITH_REGS support for arm64. - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4 - Several kselftest cases specific to arm64, together with a MAINTAINERS update for these files (moved to the ARM64 PORT entry). - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale instructions under certain conditions. - Workaround for Cortex-A57 and A72 errata where the CPU may speculatively execute an AT instruction and associate a VMID with the wrong guest page tables (corrupting the TLB). - Perf updates for arm64: additional PMU topologies on HiSilicon platforms, support for CCN-512 interconnect, AXI ID filtering in the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2. - GICv3 optimisation to avoid a heavy barrier when accessing the ICC_PMR_EL1 register. - ELF HWCAP documentation updates and clean-up. - SMC calling convention conduit code clean-up. - KASLR diagnostics printed during boot - NVIDIA Carmel CPU added to the KPTI whitelist - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove stale macro, simplify calculation in __create_pgd_mapping(), typos. - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for endinanness to help with allmodconfig" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits) arm64: Kconfig: add a choice for endianness kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous" arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry arm64: kaslr: Check command line before looking for a seed arm64: kaslr: Announce KASLR status on boot kselftest: arm64: fake_sigreturn_misaligned_sp kselftest: arm64: fake_sigreturn_bad_size kselftest: arm64: fake_sigreturn_duplicated_fpsimd kselftest: arm64: fake_sigreturn_missing_fpsimd kselftest: arm64: fake_sigreturn_bad_size_for_magic0 kselftest: arm64: fake_sigreturn_bad_magic kselftest: arm64: add helper get_current_context kselftest: arm64: extend test_init functionalities kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht] kselftest: arm64: mangle_pstate_invalid_daif_bits kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils kselftest: arm64: extend toplevel skeleton Makefile drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform arm64: mm: reserve CMA and crashkernel in ZONE_DMA32 ...
2019-11-21PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski2-0/+2
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-11-21Merge branch 'kvm-tsx-ctrl' into HEADPaolo Bonzini2-5/+20
Conflicts: arch/x86/kvm/vmx/vmx.c
2019-11-21Merge tag 'kvmarm-5.5' of ↵Paolo Bonzini1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for Linux 5.5: - Allow non-ISV data aborts to be reported to userspace - Allow injection of data aborts from userspace - Expose stolen time to guests - GICv4 performance improvements - vgic ITS emulation fixes - Simplify FWB handling - Enable halt pool counters - Make the emulated timer PREEMPT_RT compliant Conflicts: include/uapi/linux/kvm.h
2019-11-16irqchip/qcom-pdc: Add irqchip set/get state callsMaulik Shah1-0/+23
Add irqchip calls to set/get interrupt state from the parent interrupt controller. When GPIOs are renabled as interrupt lines, it is desirable to clear the interrupt state at the GIC. This avoids any unwanted interrupt as a result of stale pending state recorded when the line was used as a GPIO. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> [Lina: updated commit text, rearranged code] Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-8-git-send-email-ilina@codeaurora.org
2019-11-16irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOsLina Iyer1-9/+95
Introduce a new domain for wakeup capable GPIOs. The domain can be requested using the bus token DOMAIN_BUS_WAKEUP. In the following patches, we will specify PDC as the wakeup-parent for the TLMM GPIO irqchip. Requesting a wakeup GPIO will setup the GPIO and the corresponding PDC interrupt as its parent. Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-5-git-send-email-ilina@codeaurora.org
2019-11-16irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmaskLina Iyer1-2/+14
When an interrupt is to be serviced, the convention is to mask the interrupt at the chip and unmask after servicing the interrupt. Enabling and disabling the interrupt at the PDC irqchip causes an interrupt storm due to the way dual edge interrupts are handled in hardware. Skip configuring the PDC when the IRQ is masked and unmasked, instead use the irq_enable/irq_disable callbacks to toggle the IRQ_ENABLE register at the PDC. The PDC's IRQ_ENABLE register is only used during the monitoring mode when the system is asleep and is not needed for active mode detection. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-4-git-send-email-ilina@codeaurora.org
2019-11-16irqchip/qcom-pdc: Update max PDC interruptsLina Iyer1-2/+2
Newer SoCs have increased the number of interrupts routed to the PDC interrupt controller. Update the definition of max PDC interrupts. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-3-git-send-email-ilina@codeaurora.org
2019-11-11irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ↵Markus Elfring1-2/+3
ERR_PTR(PTR_ERR(...)) A coccicheck run provided information like the following. drivers/irqchip/irq-ti-sci-inta.c:250:9-16: WARNING: ERR_CAST can be used with vint_desc. Generated by: scripts/coccinelle/api/err_cast.cocci Thus adjust the exception handling in one if branch. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/776b7135-26af-df7d-c3a9-4339f7bf1f15@web.de
2019-11-10irqchip: Ingenic: Add process for more than one irq at the same time.Zhou Yanjie1-6/+11
Add process for the situation that more than one irq is coming to a single chip at the same time. The original code will only respond to the lowest setted bit in JZ_REG_INTC_PENDING, and then exit the interrupt dispatch function. After exiting the interrupt dispatch function, since the second interrupt has not yet responded, the interrupt dispatch function is again entered to process the second interrupt. This creates additional unnecessary overhead, and the more interrupts that occur at the same time, the more overhead is added. The improved method in this patch is to check whether there are still unresponsive interrupts after processing the lowest setted bit interrupt. If there are any, the processing will be processed according to the bit in JZ_REG_INTC_PENDING, and the interrupt dispatch function will be exited until all processing is completed. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/1570015525-27018-6-git-send-email-zhouyanjie@zoho.com
2019-11-10irqchip: ingenic: Alloc generic chips from IRQ domainPaul Cercueil1-13/+17
By creating the generic chips from the IRQ domain, we don't rely on the JZ4740_IRQ_BASE macro. It also makes the code a bit cleaner. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-5-git-send-email-zhouyanjie@zoho.com
2019-11-10irqchip: ingenic: Get virq number from IRQ domainPaul Cercueil1-1/+6
Get the virq number from the IRQ domain instead of calculating it from the hardcoded irq base. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-4-git-send-email-zhouyanjie@zoho.com
2019-11-10irqchip: ingenic: Error out if IRQ domain creation failedPaul Cercueil1-5/+10
If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.com
2019-11-10irqchip: ingenic: Drop redundant irq_suspend / irq_resume functionsPaul Cercueil1-23/+1
The same behaviour can be obtained by using the IRQCHIP_MASK_ON_SUSPEND flag on the IRQ chip. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-2-git-send-email-zhouyanjie@zoho.com
2019-11-10irqchip: Place CONFIG_SIFIVE_PLIC into the menuJonathan Neuschäfer1-2/+2
Somehow CONFIG_SIFIVE_PLIC ended up outside of the "IRQ chip support" menu. Fixes: 8237f8bc4f6e ("irqchip: add a SiFive PLIC driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Palmer Dabbelt <palmer@sifive.com> Link: https://lore.kernel.org/r/20191002144452.10178-1-j.neuschaefer@gmx.net
2019-11-10irqchip/gic-v3-its: Make vlpi_lock a spinlockMarc Zyngier1-9/+9
The VLPI map is currently a mutex, and that's a bad idea as this lock can be taken in non-preemptible contexts. Convert it to a raw spinlock, and turn the memory allocation of the VLPI map to be atomic. Reported-by: Heyi Guo <guoheyi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191108165805.3071-12-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Lock VLPI map array before translating itMarc Zyngier1-2/+4
Obtaining the mapping ivformation for a VLPI should always be done with the vlpi_lock for this device held. Otherwise, we expose ourselves to races against a concurrent unmap. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191108165805.3071-11-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Synchronise INT/CLEAR commands targetting a VLPI using VSYNCMarc Zyngier1-4/+75
We have so far always injected/cleared VLPIs using either INT+SYNC or CLEAR+SYNC sequences, but that's pretty wrong for two reasons: - SYNC only synchronises physical LPIs - The collection ID that for the associated LPI doesn't match the redistributor the vPE is associated with Instead, send an {INT,CLEAR}+VSYNC for forwarded LPIs, ensuring that the ITS synchronises against the virtual pending table. Reported-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191108165805.3071-10-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Synchronise INV command targetting a VLPI using VSYNCMarc Zyngier1-1/+35
We have so far alwways invalidated VLPIs usinc an INV+SYNC sequence, but that's pretty wrong for two reasons: - SYNC only synchronises physical LPIs - The collection ID that for the associated LPI doesn't match the redistributor the vPE is associated with Instead, send an INV+VSYNC for forwarded LPIs, ensuring that the ITS can properly synchronise the invalidation of VLPIs. Fixes: 015ec0386ab6 ("irqchip/gic-v3-its: Add VLPI configuration handling") Reported-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191108165805.3071-9-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Add its_vlpi_map helpersMarc Zyngier1-15/+32
Obtaining the mapping information for a VLPI is something quite common, and the GICv4.1 code is going to make even more use of it. Expose it as a separate set of helpers. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191027144234.8395-8-maz@kernel.org Link: https://lore.kernel.org/r/20191108165805.3071-8-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Kill its->device_ids and use TYPER copy insteadMarc Zyngier1-11/+13
Now that we have a copy of TYPER in the ITS structure, rely on this to provide the same service as its->device_ids, which gets axed. Errata workarounds are now updating the cached fields instead of requiring a separate field in the ITS structure. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191027144234.8395-7-maz@kernel.org Link: https://lore.kernel.org/r/20191108165805.3071-7-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy insteadMarc Zyngier1-4/+4
Now that we have a copy of TYPER in the ITS structure, rely on this to provide the same service as its->ite_size, which gets axed. Errata workarounds are now updating the cached fields instead of requiring a separate field in the ITS structure. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191027144234.8395-6-maz@kernel.org Link: https://lore.kernel.org/r/20191108165805.3071-6-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Make is_v4 use a TYPER copyMarc Zyngier1-12/+14
Instead of caching the GICv4 compatibility in a discrete way, cache the TYPER register instead, which can then be used to implement the same functionnality. This will get used more extensively in subsequent patches. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191027144234.8395-5-maz@kernel.org Link: https://lore.kernel.org/r/20191108165805.3071-5-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interfaceMarc Zyngier1-8/+32
We currently don't make much use of the DirectLPI feature, and it would be beneficial to do this more, if only because it becomes a mandatory feature for GICv4.1. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191027144234.8395-4-maz@kernel.org Link: https://lore.kernel.org/r/20191108165805.3071-4-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Factor out wait_for_syncr primitiveMarc Zyngier1-6/+9
Waiting for a redistributor to have performed an operation is a common thing to do, and the idiom is already spread around. As we're going to make even more use of this, let's have a primitive that does just that. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191027144234.8395-3-maz@kernel.org Link: https://lore.kernel.org/r/20191108165805.3071-3-maz@kernel.org
2019-11-10irqchip/gic-v3-its: Free collection mapping on device teardownMarc Zyngier1-1/+1
We allocate the collection mapping on device creation, but somehow free it on the irqdomain free path, which is pretty inconsistent and has led to bugs in the past. Move it to the point where we teardown the device, making the alloc/free symetric. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191108165805.3071-2-maz@kernel.org
2019-11-10drivers: irqchip: qcom-pdc: Move to an SoC independent compatibleRajendra Nayak1-1/+1
Remove the sdm845 SoC specific compatible to make the driver easily reusable across other SoC's with the same IP block. This will reduce further churn adding any SoC specific compatibles unless really needed. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-7-rnayak@codeaurora.org
2019-11-10irqchip: Add support for Layerscape external interrupt linesRasmus Villemoes3-0/+202
The LS1021A allows inverting the polarity of six interrupt lines IRQ[0:5] via the scfg_intpcr register, effectively allowing IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING for those. We just need to check the type, set the relevant bit in INTPCR accordingly, and fixup the type argument before calling the GIC's irq_set_type. In fact, the power-on-reset value of the INTPCR register on the LS1021A is so that all six lines have their polarity inverted. Hence any hardware connected to those lines is unusable without this: If the line is indeed active low, the generic GIC code will reject an irq spec with IRQ_TYPE_LEVEL_LOW, while if the line is active high, we must obviously disable the polarity inversion (writing 0 to the relevant bit) before unmasking the interrupt. Some other Layerscape SOCs (LS1043A, LS1046A) have a similar feature, just with a different number of external interrupt lines (and a different POR value for the INTPCR register). This driver should be prepared for supporting those by properly filling out the device tree node. I have the reference manuals for all three boards, but I've only tested the driver on an LS1021A. Unfortunately, the Kconfig symbol ARCH_LAYERSCAPE only exists on arm64, so do as is done for irq-ls-scfg-msi.c: introduce a new symbol which is set when either ARCH_LAYERSCAPE or SOC_LS1021A is set. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191107122115.6244-3-linux@rasmusvillemoes.dk
2019-11-10irqchip/irq-bcm7038-l1: Support brcm,int-fwd-maskFlorian Fainelli1-4/+26
On some specific chips like 7211 we need to leave some interrupts untouched/forwarded to the VPU which is another agent in the system making use of that interrupt controller hardware (goes to both ARM GIC and VPU L1 interrupt controller). Make that possible by using the existing brcm,int-fwd-mask property and take necessary actions to avoid masking that interrupt as well as not allowing Linux to map them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191024201415.23454-6-f.fainelli@gmail.com
2019-11-10irqchip/irq-bcm7038-l1: Enable parent IRQ if necessaryFlorian Fainelli1-0/+4
If the 'brcm,irq-can-wake' property is specified, make sure we also enable the corresponding parent interrupt we are attached to. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191024201415.23454-4-f.fainelli@gmail.com
2019-11-10irqchip/irq-bcm7038-l1: Add PM supportJustin Chen1-0/+89
The current L1 controller does not mask any interrupts when dropping into suspend. This mean we can receive unexpected wake up sources. Modified the BCM7038 L1 controller to mask the all non-wake interrupts before dropping into suspend. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191024201415.23454-2-f.fainelli@gmail.com
2019-11-10irqchip/gic-v3-its: Fix u64 to __le64 warningsBen Dooks (Codethink)1-5/+8
The its_cmd_block struct can either have u64 or __le64 data in it, so make a anonymous union to remove the sparse warnings when converting to/from these. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191017112955.15853-1-ben.dooks@codethink.co.uk
2019-11-10irqchip: Remove redundant semicolon after whileDaode Huang2-3/+3
check drivers/irqchip with "make coccicheck M=drivers/irqchip/", it will report unneeded semicolon like below, just remove them. drivers/irqchip/irq-zevio.c:54:2-3: Unneeded semicolon drivers/irqchip/irq-gic-v3.c:177:2-3: Unneeded semicolon drivers/irqchip/irq-gic-v3.c:234:2-3: Unneeded semicolon Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571300729-38822-1-git-send-email-huangdaode@hisilicon.com
2019-11-05riscv: abstract out CSR names for supervisor vs machine modeChristoph Hellwig1-4/+7
Many of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide versions of the CSR names and fields that map to either the S-mode or M-mode variant depending on a new CONFIG_RISCV_M_MODE kconfig symbol. Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com> and Paul Walmsley <paul.walmsley@sifive.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-28KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/putMarc Zyngier1-1/+6
When the VHE code was reworked, a lot of the vgic stuff was moved around, but the GICv4 residency code did stay untouched, meaning that we come in and out of residency on each flush/sync, which is obviously suboptimal. To address this, let's move things around a bit: - Residency entry (flush) moves to vcpu_load - Residency exit (sync) moves to vcpu_put - On blocking (entry to WFI), we "put" - On unblocking (exit from WFI), we "load" Because these can nest (load/block/put/load/unblock/put, for example), we now have per-VPE tracking of the residency state. Additionally, vgic_v4_put gains a "need doorbell" parameter, which only gets set to true when blocking because of a WFI. This allows a finer control of the doorbell, which now also gets disabled as soon as it gets signaled. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
2019-10-25Merge tag 'irqchip-fixes-5.4-2' of ↵Thomas Gleixner2-5/+20
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull the second lot of irqchip updates for 5.4 from Marc Zyngier: - Sifive PLIC: force driver to skip non-relevant contexts - GICv4: Don't send VMOVP commands to ITSs that don't have this vPE mapped
2019-10-25irqchip/sifive-plic: Skip contexts except supervisor in plic_init()Alan Mikhak1-2/+2
Modify plic_init() to skip .dts interrupt contexts other than supervisor external interrupt. The .dts entry for plic may specify multiple interrupt contexts. For example, it may assign two entries IRQ_M_EXT and IRQ_S_EXT, in that order, to the same interrupt controller. This patch modifies plic_init() to skip the IRQ_M_EXT context since IRQ_S_EXT is currently the only supported context. If IRQ_M_EXT is not skipped, plic_init() will report "handler already present for context" when it comes across the IRQ_S_EXT context in the next iteration of its loop. Without this patch, .dts would have to be edited to replace the value of IRQ_M_EXT with -1 for it to be skipped. Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv Link: https://lkml.kernel.org/r/1571933503-21504-1-git-send-email-alan.mikhak@sifive.com
2019-10-24irqchip/gic-v3-its: Use the exact ITSList for VMOVPZenghui Yu1-3/+18
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0), we will map vPEs only on ITSs that will actually control interrupts for the given VM. And when moving a vPE, the VMOVP command will be issued only for those ITSs. But when issuing VMOVPs we seemed fail to present the exact ITSList to ITSs who are actually included in the synchronization operation. The its_list_map we're currently using includes all ITSs in the system, even though some of them don't have the corresponding vPE mapping at all. Introduce get_its_list() to get the per-VM its_list_map, to indicate which ITSs have vPE mappings for the given VM, and use this map as the expected ITSList when building VMOVP. This is hopefully a performance gain not to do some synchronization with those unsuspecting ITSs. And initialize the whole command descriptor to zero at beginning, since the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
2019-10-15arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clearMarc Zyngier1-0/+20
The GICv3 architecture specification is incredibly misleading when it comes to PMR and the requirement for a DSB. It turns out that this DSB is only required if the CPU interface sends an Upstream Control message to the redistributor in order to update the RD's view of PMR. This message is only sent when ICC_CTLR_EL1.PMHE is set, which isn't the case in Linux. It can still be set from EL3, so some special care is required. But the upshot is that in the (hopefuly large) majority of the cases, we can drop the DSB altogether. This relies on a new static key being set if the boot CPU has PMHE set. The drawback is that this static key has to be exported to modules. Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-14Merge tag 'irqchip-fixes-5.4-1' of ↵Thomas Gleixner4-15/+38
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Add retrigger support to Amazon's al-fic driver - Add SAM9X60 support to Atmel's AIC5 irqchip - Fix GICv3 maximum interrupt calculation - Convert SiFive's PLIC to the fasteoi IRQ flow
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds3-0/+195
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
2019-09-18irqchip/sifive-plic: Switch to fasteoi flowMarc Zyngier1-14/+15
The SiFive PLIC interrupt controller seems to have all the HW features to support the fasteoi flow, but the driver seems to be stuck in a distant past. Bring it into the 21st century. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Palmer Dabbelt <palmer@sifive.com> (QEMU Boot) Tested-by: Darius Rad <darius@bluespec.com> (on 2 HW PLIC implementations) Tested-by: Paul Walmsley <paul.walmsley@sifive.com> (HiFive Unleashed) Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/8636gxskmj.wl-maz@kernel.org
2019-09-18irqchip/gic-v3: Fix GIC_LINE_NR accessorZenghui Yu1-1/+1
As per GIC spec, ITLinesNumber indicates the maximum SPI INTID that the GIC implementation supports. And the maximum SPI INTID an implementation might support is 1019 (field value 11111). max(GICD_TYPER_SPIS(...), 1020) is not what we actually want for GIC_LINE_NR. Fix it to min(GICD_TYPER_SPIS(...), 1020). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1568789850-14080-1-git-send-email-yuzenghui@huawei.com
2019-09-17Merge branch 'irq-core-for-linus' of ↵Linus Torvalds14-153/+466
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq updates from Thomas Gleixner: "Updates from the irq departement: - Update the interrupt spreading code so it handles numa node with different CPU counts properly. - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI ranges. - Conversion of all alloc_fwnode() users to use physical addresses instead of virtual addresses so the virtual addresses are not leaked. The physical address is sufficient to identify the associated interrupt chip. - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips. - Enforce interrupt threading at compile time if RT is enabled. - Small updates and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices irqchip/uniphier-aidet: Use devm_platform_ioremap_resource() irqdomain: Add the missing assignment of domain->fwnode for named fwnode irqchip/mmp: Coexist with GIC root IRQ controller irqchip/mmp: Mask off interrupts from other cores irqchip/mmp: Add missing chained_irq_{enter,exit}() irqchip/mmp: Do not use of_address_to_resource() to get mux regs irqchip/meson-gpio: Add support for meson sm1 SoCs dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs genirq/affinity: Remove const qualifier from node_to_cpumask argument genirq/affinity: Spread vectors on node according to nr_cpu ratio genirq/affinity: Improve __irq_build_affinity_masks() irqchip: Remove dev_err() usage after platform_get_irq() irqchip: Add include guard to irq-partition-percpu.h irqchip/mmp: Do not call irq_set_default_host() on DT platforms irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803 irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks irqchip/gic-v3: Warn about inconsistent implementations of extended ranges irqchip/gic-v3: Add EPPI range support ...
2019-09-09irqchip/atmel-aic5: Add support for sam9x60 irqchipSandeep Sheriker Mallikarjun1-0/+10
Add support for SAM9X60 irqchip. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1568026835-6646-1-git-send-email-claudiu.beznea@microchip.com [claudiu.beznea@microchip.com: update aic5_irq_fixups[], update documentation]
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 21:47:16 +0000