summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2021-07-09Merge tag 'irqchip-fixes-5.14-1' of ↵Thomas Gleixner3-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix a MIPS bug where irqdomain loopkups could occur in a context where RCU is not allowed - Fix a documentation bug for handle_domain_irq
2021-07-09irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entryMarc Zyngier3-11/+12
Since d4a45c68dc81 ("irqdomain: Protect the linear revmap with RCU"), any irqdomain lookup requires the RCU read lock to be held. This assumes that the architecture code will be structured such as irq_enter() will be called *before* the interrupt is looked up in the irq domain. However, this isn't the case for MIPS, and a number of drivers are structured to do it the other way around when handling an interrupt in their root irqchip (secondary irqchips are OK by construction). This results in a RCU splat on a lockdep-enabled kernel when the kernel takes an interrupt from idle, as reported by Guenter Roeck. Note that this could have fired previously if any driver had used tree-based irqdomain, which always had the RCU requirement. To solve this, provide a MIPS-specific helper (do_domain_IRQ()) as the pendent of do_IRQ() that will do thing in the right order (and maybe save some cycles in the process). Ideally, MIPS would be moved over to using handle_domain_irq(), but that's much more ambitious. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> [maz: add dependency on CONFIG_IRQ_DOMAIN after report from the kernelci bot] Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20210705172352.GA56304@roeck-us.net Link: https://lore.kernel.org/r/20210706110647.3979002-1-maz@kernel.org
2021-06-29Merge tag 'irq-core-2021-06-29' of ↵Linus Torvalds56-231/+137
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core changes: - Cleanup and simplification of common code to invoke the low level interrupt flow handlers when this invocation requires irqdomain resolution. Add the necessary core infrastructure. - Provide a proper interface for modular PMU drivers to set the interrupt affinity. - Add a request flag which allows to exclude interrupts from spurious interrupt detection. Useful especially for IPI handlers which always return IRQ_HANDLED which turns the spurious interrupt detection into a pointless waste of CPU cycles. Driver changes: - Bulk convert interrupt chip drivers to the new irqdomain low level flow handler invocation mechanism. - Add device tree bindings for the Renesas R-Car M3-W+ SoC - Enable modular build of the Qualcomm PDC driver - The usual small fixes and improvements" * tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties irqchip: gic-pm: Remove redundant error log of clock bulk irqchip/sun4i: Remove unnecessary oom message irqchip/irq-imx-gpcv2: Remove unnecessary oom message irqchip/imgpdc: Remove unnecessary oom message irqchip/gic-v3-its: Remove unnecessary oom message irqchip/gic-v2m: Remove unnecessary oom message irqchip/exynos-combiner: Remove unnecessary oom message irqchip: Bulk conversion to generic_handle_domain_irq() genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ() genirq: Add generic_handle_domain_irq() helper irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq() irqdesc: Fix __handle_domain_irq() comment genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co irqdomain: Introduce irq_resolve_mapping() irqdomain: Protect the linear revmap with RCU irqdomain: Cache irq_data instead of a virq number in the revmap irqdomain: Use struct_size() helper when allocating irqdomain irqdomain: Make normal and nomap irqdomains exclusive powerpc: Move the use of irq_domain_add_nomap() behind a config option ...
2021-06-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-21/+15
Pull kvm updates from Paolo Bonzini: "This covers all architectures (except MIPS) so I don't expect any other feature pull requests this merge window. ARM: - Add MTE support in guests, complete with tag save/restore interface - Reduce the impact of CMOs by moving them in the page-table code - Allow device block mappings at stage-2 - Reduce the footprint of the vmemmap in protected mode - Support the vGIC on dumb systems such as the Apple M1 - Add selftest infrastructure to support multiple configuration and apply that to PMU/non-PMU setups - Add selftests for the debug architecture - The usual crop of PMU fixes PPC: - Support for the H_RPT_INVALIDATE hypercall - Conversion of Book3S entry/exit to C - Bug fixes S390: - new HW facilities for guests - make inline assembly more robust with KASAN and co x86: - Allow userspace to handle emulation errors (unknown instructions) - Lazy allocation of the rmap (host physical -> guest physical address) - Support for virtualizing TSC scaling on VMX machines - Optimizations to avoid shattering huge pages at the beginning of live migration - Support for initializing the PDPTRs without loading them from memory - Many TLB flushing cleanups - Refuse to load if two-stage paging is available but NX is not (this has been a requirement in practice for over a year) - A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from CR0/CR4/EFER, using the MMU mode everywhere once it is computed from the CPU registers - Use PM notifier to notify the guest about host suspend or hibernate - Support for passing arguments to Hyper-V hypercalls using XMM registers - Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on AMD processors - Hide Hyper-V hypercalls that are not included in the guest CPUID - Fixes for live migration of virtual machines that use the Hyper-V "enlightened VMCS" optimization of nested virtualization - Bugfixes (not many) Generic: - Support for retrieving statistics without debugfs - Cleanups for the KVM selftests API" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits) KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled kvm: x86: disable the narrow guest module parameter on unload selftests: kvm: Allows userspace to handle emulation errors. kvm: x86: Allow userspace to handle emulation errors KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic KVM: x86: Enhance comments for MMU roles and nested transition trickiness KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU KVM: x86/mmu: Use MMU's role to determine PTTYPE KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers KVM: x86/mmu: Add a helper to calculate root from role_regs KVM: x86/mmu: Add helper to update paging metadata KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0 KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper KVM: x86/mmu: Get nested MMU's root level from the MMU's role ...
2021-06-17Merge tag 'irqchip-fixes-5.13-2' of ↵Thomas Gleixner1-1/+35
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix GICv3 NMI handling where an IRQ could be mistakenly handled as a NMI, with disatrous effects Link: https://lore.kernel.org/r/20210610171127.2404752-1-maz@kernel.org
2021-06-11Merge branch irq/irqchip-driver-updates into irq/irqchip-nextMarc Zyngier3-8/+14
Various minor irqchip driver updates: - QC PDC now compiles as a module - HiSilicon MBIGEN fix for compile-time warning when !ACPI * irq/irqchip-driver-updates: irqchip/mbigen: Fix compile warning when CONFIG_ACPI is disabled irqchip/qcom-pdc: Switch to IRQCHIP_PLATFORM_DRIVER and allow as a module
2021-06-11Merge branch irq/generic_handle_domain_irq-core into irq/irqchip-nextMarc Zyngier48-193/+113
Simplify the handling of interrupts that require an IRQ domain resolution: - domains now cache the irqdata instead of the irq number - consistent behaviour wrt RCU - single lookup for architectures using sparse IRQs - reduced boilerplate code in drivers. * irq/generic_handle_domain_irq-core: (26 commits) irqchip: Bulk conversion to generic_handle_domain_irq() genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ() genirq: Add generic_handle_domain_irq() helper irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq() irqdesc: Fix __handle_domain_irq() comment genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co irqdomain: Introduce irq_resolve_mapping() irqdomain: Protect the linear revmap with RCU irqdomain: Cache irq_data instead of a virq number in the revmap irqdomain: Use struct_size() helper when allocating irqdomain irqdomain: Make normal and nomap irqdomains exclusive powerpc: Move the use of irq_domain_add_nomap() behind a config option irqdomain: Reimplement irq_linear_revmap() with irq_find_mapping() irqdomain: Kill irq_domain_add_legacy_isa powerpc: Drop dependency between asm/irq.h and linux/irqdomain.h powerpc: Convert irq_domain_add_legacy_isa use to irq_domain_add_legacy scsi/ibmvscsi: Directly include linux/{of.h,irqdomain.h} powerpc: Add missing linux/{of.h,irqdomain.h} include directives MIPS: Do not include linux/irqdomain.h from asm/irq.h MIPS: Add missing linux/irqdomain.h includes ...
2021-06-11irqchip: gic-pm: Remove redundant error log of clock bulkChunfeng Yun1-3/+1
There is error log in clk_bulk_prepare/enable() Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1617937474-24630-1-git-send-email-chunfeng.yun@mediatek.com
2021-06-11irqchip/sun4i: Remove unnecessary oom messageZhen Lei1-6/+2
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210609141428.14737-1-thunder.leizhen@huawei.com
2021-06-11irqchip/irq-imx-gpcv2: Remove unnecessary oom messageZhen Lei1-3/+1
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210609141150.14637-1-thunder.leizhen@huawei.com
2021-06-11irqchip/imgpdc: Remove unnecessary oom messageZhen Lei1-6/+2
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210609140828.14584-1-thunder.leizhen@huawei.com
2021-06-11irqchip/gic-v3-its: Remove unnecessary oom messageZhen Lei1-6/+2
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210609140643.14531-1-thunder.leizhen@huawei.com
2021-06-11irqchip/gic-v2m: Remove unnecessary oom messageZhen Lei1-3/+1
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210609140534.14478-1-thunder.leizhen@huawei.com
2021-06-11irqchip/exynos-combiner: Remove unnecessary oom messageZhen Lei1-3/+1
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210609140335.14425-1-thunder.leizhen@huawei.com
2021-06-10irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entryMarc Zyngier1-1/+35
The arm64 entry code suffers from an annoying issue on taking a NMI, as it sets PMR to a value that actually allows IRQs to be acknowledged. This is done for consistency with other parts of the code, and is in the process of being fixed. This shouldn't be a problem, as we are not enabling interrupts whilst in NMI context. However, in the infortunate scenario that we took a spurious NMI (retired before the read of IAR) *and* that there is an IRQ pending at the same time, we'll ack the IRQ in NMI context. Too bad. In order to avoid deadlocks while running something like perf, teach the GICv3 driver about this situation: if we were in a context where no interrupt should have fired, transiently set PMR to a value that only allows NMIs before acking the pending interrupt, and restore the original value after that. This papers over the core issue for the time being, and makes NMIs great again. Sort of. Fixes: 4d6a38da8e79e94c ("arm64: entry: always set GIC_PRIO_PSR_I_SET during entry") Co-developed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/lkml/20210610145731.1350460-1-maz@kernel.org
2021-06-10irqchip: Bulk conversion to generic_handle_domain_irq()Marc Zyngier47-190/+111
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-10irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq()Marc Zyngier1-3/+1
Given that the nvic driver is fully irqdomain aware, there is no reason for it to use the arch-specific handle_IRQ(), and it can be moved over to handle_domain_irq(). Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-10irqchip/mips-gic: Directly include linux/irqdomain.hMarc Zyngier1-0/+1
This drivers currently obtains linux/irqdomain.h by luck and a chain of bizarre inclusions, which we're about to fix. Let's include the required file directly. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-06irqchip/mbigen: Fix compile warning when CONFIG_ACPI is disabledYang Yingliang1-6/+6
Fix the following compile warning: drivers/irqchip/irq-mbigen.c:372:36: warning: ‘mbigen_acpi_match’ defined but not used [-Wunused-const-variable=] static const struct acpi_device_id mbigen_acpi_match[] = { Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210519050455.1693953-1-yangyingliang@huawei.com
2021-06-06irqchip/qcom-pdc: Switch to IRQCHIP_PLATFORM_DRIVER and allow as a moduleSaravana Kannan2-2/+8
This patch revives changes from Saravana Kannan to switch the qcom-pdc driver to use IRQCHIP_PLATFORM_DRIVER helper macros, and allows qcom-pdc driver to be loaded as a permanent module. Earlier attempts at this ran into trouble with loading dependencies, but with Saravana's fw_devlink=on set by default now we should avoid those. [jstultz: Folded in with my changes to allow the driver to be loadable as a permenent module] Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maulik Shah <mkshah@codeaurora.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-arm-msm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210518211922.3474368-1-john.stultz@linaro.org
2021-06-01irqchip/apple-aic: Advertise some level of vGICv3 compatibilityMarc Zyngier1-0/+9
The CPUs in the Apple M1 SoC partially implement a virtual GICv3 CPU interface, although one that is incapable of HW deactivation of interrupts, nor masking the maintenance interrupt. Advertise the support to KVM. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-01irqchip/gic: Split vGIC probing information from the GIC codeMarc Zyngier4-21/+6
The vGIC advertising code is unsurprisingly very much tied to the GIC implementations. However, we are about to extend the support to lesser implementations. Let's dissociate the vgic registration from the GIC code and move it into KVM, where it makes a bit more sense. This also allows us to mark the gic_kvm_info structures as __initdata. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-05-16irqchip: Remove redundant error printingZhen Lei3-9/+3
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210511125428.6108-2-thunder.leizhen@huawei.com
2021-05-10irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLEGeert Uytterhoeven1-1/+1
The Apple Interrupt Controller is only present on Apple Silicon SoCs. Hence add a dependency on ARCH_APPLE, to prevent asking the user about this driver when configuring a kernel without Apple Silicon SoC support. Drop the default, as ARCH_APPLE already selects APPLE_AIC. Fixes: 76cde26394114f6a ("irqchip/apple-aic: Add support for the Apple Interrupt Controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/f37e8daea37d50651d2164b0b3dad90780188548.1618316398.git.geert+renesas@glider.be
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+16
Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-04-29Merge tag 'mips_5.13' of ↵Linus Torvalds1-10/+50
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed get_fs/set_fs - removed broken/unmaintained MIPS KVM trap and emulate support - added support for Loongson-2K1000 - fixes and cleanups * tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits) MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG. MIPS: select ARCH_KEEP_MEMBLOCK unconditionally mips: Do not include hi and lo in clobber list for R6 MIPS:DTS:Correct the license for Loongson-2K MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K MIPS: Avoid handcoded DIVU in `__div64_32' altogether lib/math/test_div64: Correct the spelling of "dividend" lib/math/test_div64: Fix error message formatting mips/bootinfo:correct some comments of fw_arg MIPS: Avoid DIVU in `__div64_32' is result would be zero MIPS: Reinstate platform `__div64_32' handler div64: Correct inline documentation for `do_div' lib/math: Add a `do_div' test module MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE MIPS: pci-legacy: revert "use generic pci_enable_resources" MIPS: Loongson64: Add kexec/kdump support MIPS: pci-legacy: use generic pci_enable_resources MIPS: pci-legacy: remove busn_resource field MIPS: pci-legacy: remove redundant info messages MIPS: pci-legacy: stop using of_pci_range_to_resource ...
2021-04-26Merge tag 'arm-apple-m1-5.13' of ↵Linus Torvalds3-0/+861
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Apple M1 platform support from Arnd Bergmann: "The Apple M1 is the processor used it all current generation Apple Macintosh computers. Support for this platform so far is rudimentary, but it boots and can use framebuffer and serial console over a special USB cable. Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe) is work in progress but was not ready in time. A very detailed description of what works is in the commit message of commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the AsahiLinux wiki" Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/ * tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: asm-generic/io.h: Unbork ioremap_np() declaration arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree dt-bindings: display: Add apple,simple-framebuffer arm64: Kconfig: Introduce CONFIG_ARCH_APPLE irqchip/apple-aic: Add support for the Apple Interrupt Controller dt-bindings: interrupt-controller: Add DT bindings for apple-aic arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h of/address: Add infrastructure to declare MMIO as non-posted asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np arm64: Implement ioremap_np() to map MMIO as nGnRnE docs: driver-api: device-io: Document ioremap() variants & access funcs docs: driver-api: device-io: Document I/O access functions asm-generic/io.h: Add a non-posted variant of ioremap() arm64: arch_timer: Implement support for interrupt-names dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: vendor-prefixes: Add apple prefix
2021-04-24Merge tag 'irqchip-5.13' of ↵Thomas Gleixner16-28/+447
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip and irqdomain updates from Marc Zyngier: New HW support: - New driver for the Nuvoton WPCM450 interrupt controller - New driver for the IDT 79rc3243x interrupt controller - Add support for interrupt trigger configuration to the MStar irqchip - Add more external interrupt support to the STM32 irqchip - Add new compatible strings for QCOM SC7280 to the qcom-pdc binding Fixes and cleanups: - Drop irq_create_strict_mappings() and irq_create_identity_mapping() from the irqdomain API, with cleanups in a couple of drivers - Fix nested NMI issue with spurious interrupts on GICv3 - Don't allow GICv4.1 vSGIs when the CPU doesn't support them - Various cleanups and minor fixes Link: https://lore.kernel.org/r/20210424094640.1731920-1-maz@kernel.org
2021-04-24irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMPRobert Hancock1-1/+6
Previously the XILINX_INTC config option was hidden and only auto-selected on the MicroBlaze platform. However, this IP can also be used on the Zynq and ZynqMP platforms as a secondary cascaded controller. Allow this option to be user-enabled on those platforms. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423185853.2556087-1-robert.hancock@calian.com
2021-04-23irqchip/gic-v3: Do not enable irqs when handling spurious interrupsHe Ying1-4/+4
We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. Fixes: 3f1f3234bc2d ("irqchip/gic-v3: Switch to PMR masking before calling IRQ handler") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: He Ying <heying24@huawei.com> [maz: rewrote commit message, corrected Fixes: tag] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423083516.170111-1-heying24@huawei.com Cc: stable@vger.kernel.org
2021-04-22irqchip: Add support for IDT 79rc3243x interrupt controllerThomas Bogendoerfer3-0/+130
IDT 79rc3243x SoCs have rather simple interrupt controllers connected to the MIPS CPU interrupt lines. Each of them has room for up to 32 interrupts. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210422145330.73452-1-tsbogend@alpha.franken.de
2021-04-22irqchip/jcore-aic: Kill use of irq_create_strict_mappings()Marc Zyngier1-2/+2
irq_create_strict_mappings() is a poor way to allow the use of a linear IRQ domain as a legacy one. Let's be upfront about it. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210406093557.1073423-4-maz@kernel.org
2021-04-22irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detectionLorenzo Pieralisi1-2/+25
GIC CPU interfaces versions predating GIC v4.1 were not built to accommodate vINTID within the vSGI range; as reported in the GIC specifications (8.2 "Changes to the CPU interface"), it is CONSTRAINED UNPREDICTABLE to deliver a vSGI to a PE with ID_AA64PFR0_EL1.GIC < b0011. Check the GIC CPUIF version by reading the SYS_ID_AA64_PFR0_EL1. Disable vSGIs if a CPUIF version < 4.1 is detected to prevent using vSGIs on systems where they may misbehave. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210317100719.3331-2-lorenzo.pieralisi@arm.com
2021-04-22irqchip/tb10x: Use 'fallthrough' to eliminate a warningRandy Dunlap1-0/+1
Use the 'fallthrough' macro to document that this switch case does indeed fall through to the next case. ../drivers/irqchip/irq-tb10x.c: In function 'tb10x_irq_set_type': ../drivers/irqchip/irq-tb10x.c:62:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 62 | flow_type = IRQ_TYPE_LEVEL_LOW; ../drivers/irqchip/irq-tb10x.c:63:2: note: here 63 | case IRQ_TYPE_LEVEL_LOW: | ^~~~ Fixes: b06eb0173ef1 ("irqchip: Add TB10x interrupt controller driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210422051620.23021-1-rdunlap@infradead.org
2021-04-08irqchip/apple-aic: Add support for the Apple Interrupt ControllerHector Martin3-0/+861
This is the root interrupt controller used on Apple ARM SoCs such as the M1. This irqchip driver performs multiple functions: * Handles both IRQs and FIQs * Drives the AIC peripheral itself (which handles IRQs) * Dispatches FIQs to downstream hard-wired clients (currently the ARM timer). * Implements a virtual IPI multiplexer to funnel multiple Linux IPIs into a single hardware IPI Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-04-08irqchip/wpcm450: Drop COMPILE_TESTMarc Zyngier1-1/+1
This driver is (for now) ARM specific, and currently doesn't build with a variety of architectures (ia64, RISC-V, x86_64 at the very least). Drop COMPILE_TEST from Kconfig until it gets sorted out. Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-07irqchip/irq-mst: Support polarity configurationMark-PK Tsai1-3/+95
Support irq polarity configuration and save and restore the config when system suspend and resume. Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> [maz: fixed irq_set_type callback] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210315131848.31840-1-mark-pk.tsai@mediatek.com
2021-04-07irqchip: Add driver for WPCM450 interrupt controllerJonathan Neuschäfer3-0/+168
The WPCM450 AIC ("Advanced Interrupt Controller") is the interrupt controller found in the Nuvoton WPCM450 SoC and other Winbond/Nuvoton SoCs. The list of registers if based on the AMI vendor kernel and the Nuvoton W90N745 datasheet. Although the hardware supports other interrupt modes, the driver only supports high-level interrupts at the moment, because other modes could not be tested so far. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210406120921.2484986-7-j.neuschaefer@gmx.net
2021-04-07irqchip/stm32: Add usart instances exti direct event supportErwan Le Ray1-0/+7
Add following usart instances exti direct event support (used for UART wake up). - exti 26 (USART1) is mapped to GIC 37 - exti 27 (USART2) is mapped to GIC 38 - exti 28 (USART3) is mapped to GIC 39 - exti 29 (USART6) is mapped to GIC 71 - exti 31 (UART5) is mapped to GIC 53 - exti 32 (UART7) is mapped to GIC 82 - exti 33 (UART8) is mapped to GIC 83 Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210319184253.5841-4-erwan.leray@foss.st.com
2021-04-07irqchip/gic-v3: Fix OF_BAD_ADDR error handlingArnd Bergmann1-1/+1
When building with extra warnings enabled, clang points out a mistake in the error handling: drivers/irqchip/irq-gic-v3-mbi.c:306:21: error: result of comparison of constant 18446744073709551615 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (mbi_phys_base == OF_BAD_ADDR) { Truncate the constant to the same type as the variable it gets compared to, to shut make the check work and void the warning. Fixes: 505287525c24 ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210323131842.2773094-1-arnd@kernel.org
2021-04-07irqchip/sifive-plic: Mark two global variables __ro_after_initJisheng Zhang1-2/+2
All of these two are never modified after init, so they can be __ro_after_init. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210330020911.26423e9e@xhacker
2021-04-07irqchip/hisi: Use the correct HiSilicon copyrightHao Fang2-4/+4
s/Hisilicon/HiSilicon/ It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang <fanghao11@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1617086780-8521-1-git-send-email-fanghao11@huawei.com
2021-03-25irqchip/loongson-liointc: irqchip add 2.0 versionQing Zhang1-9/+49
Add IO interrupt controller support for Loongson-2K1000, different from the Loongson-3A series is that Loongson-2K1000 has 64 interrupt sources, 0-31 correspond to the device tree liointc0 device node, and the other correspond to liointc1 node. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24irqchip/gic-v3-its: Drop the setting of PTZ altogetherShenming Lu1-2/+7
GICv4.1 gives a way to get the VLPI state, which needs to map the vPE first, and after the state read, we may remap the vPE back while the VPT is not empty. So we can't assume that the VPT is empty at the first map. Besides, the optimization of PTZ is probably limited since the HW should be fairly efficient to parse the empty VPT. Let's drop the setting of PTZ altogether. Signed-off-by: Shenming Lu <lushenming@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210322060158.1584-3-lushenming@huawei.com
2021-03-24irqchip/gic-v3-its: Add a cache invalidation right after vPE unmappingMarc Zyngier1-0/+9
In order to be able to manipulate the VPT once a vPE has been unmapped, perform the required CMO to invalidate the CPU view of the VPT. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Shenming Lu <lushenming@huawei.com> Link: https://lore.kernel.org/r/20210322060158.1584-2-lushenming@huawei.com
2021-03-22irq: Fix typos in commentsIngo Molnar14-21/+21
Fix ~36 single-word typos in the IRQ, irqchip and irqdomain code comments. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-12MIPS: Loongson64: Move loongson_system_configuration to loongson.hQing Zhang1-1/+1
The purpose of separating loongson_system_configuration from boot_param.h is to keep the other structure consistent with the firmware. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-09irqchip/ingenic: Add support for the JZ4760Paul Cercueil2-0/+2
Add support for the interrupt controller found in the JZ4760 SoC, which works exactly like the one in the JZ4770. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210307172014.73481-2-paul@crapouillou.net
2021-03-08irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLERMarc Zyngier1-9/+0
Implementing CONFIG_GENERIC_IRQ_MULTI_HANDLER is a decision that is made at the architecture level, and shouldn't involve the irqchip at all (we even provide a fallback helper when the option isn't selected). Drop all instances of such selection from non-arch code. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210217142800.2547737-1-maz@kernel.org Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-02-15Merge tag 'irqchip-5.12' of ↵Thomas Gleixner10-397/+571
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier - New driver for the MIPS-based Realtek RTL838x/RTL839x SoC - Conversion of the sun6i-r support code to a hierarchical setup - Fix wake-up interrupts for the ls-extirq driver - Fix MSI allocation for the loongson-pch-msi driver - Add compatible strings for new Qualcomm SoCs - Tidy up a few Kconfig entries (IMX, CSKY) - Spelling phyksiz - Remove the sirfsoc and tango drivers Link: https://lore.kernel.org/r/20210214124015.3333457-1-maz@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 08:35:51 +0000