summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/irq-crossbar.c
AgeCommit message (Collapse)AuthorFilesLines
2015-03-15irqchip: crossbar: Convert dra7 crossbar to stacked domainsMarc Zyngier1-87/+123
Support for the TI crossbar used on the DRA7 family of chips is implemented as an ugly hack on the side of the GIC. Converting it to stacked domains makes it slightly more palatable, as it results in a cleanup. Unfortunately, as the DT bindings failed to acknowledge the fact that this is actually yet another interrupt controller (the third, actually), we have yet another breakage. Oh well. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-18irqchip: crossbar: Off by one bugs in initDan Carpenter1-2/+2
My static checker complains that the ">" should be ">=" or else we go beyond the end of the cb->irq_map[] array on the next line. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Allow for quirky hardware with direct hardwiring of GICNishanth Menon1-2/+18
On certain platforms such as DRA7, SPIs 0, 1, 2, 3, 5, 6, 10, 131, 132, 133 are direct wired to hardware blocks bypassing crossbar. This quirky implementation is *NOT* supposed to be the expectation of crossbar hardware usage. However, these are already marked in our description of the hardware with SKIP and RESERVED where appropriate. Unfortunately, we need to be able to refer to these hardwired IRQs. So, to request these, crossbar driver can use the existing information from it's table that these SKIP/RESERVED maps are direct wired sources and generic allocation/programming of crossbar should be avoided. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-17-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Introduce centralized check for crossbar writeNishanth Menon1-2/+12
This is a basic check to ensure that crossbar register needs to be written. This ensures that we have a common check which is used in both map and unmap logic. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-15-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Introduce ti, max-crossbar-sources to identify valid ↵Nishanth Menon1-2/+19
crossbar mapping Currently we attempt to map any crossbar value to an IRQ, however, this is not correct from hardware perspective. There is a max crossbar event number upto which hardware supports. So describe the same in device tree using 'ti,max-crossbar-sources' property and use it to validate requests. [ jac - remove MAX_SOURCES from binding doc, use integer because we shouldn't put implementation details in the binding docs ] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-14-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Add kerneldoc for crossbar_domain_unmap callbackSricharan R1-0/+11
Adding kerneldoc for unmap callback function. Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-13-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Set cb pointer to null in case of errorSricharan R1-0/+2
If crossbar_of_init returns with a error, then set the cb pointer to null. Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-12-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Change the goto namingNishanth Menon1-12/+11
Using err1,2,3,4 etc makes it hard to ensure a new exit path in the middle will not result in spurious changes, so rename the error paths as per the function it does. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-11-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Return proper error valueNishanth Menon1-3/+11
crossbar_of_init always returns -ENOMEM in case of errors. There can be other causes of failure like invalid data from DT. So return a appropriate error value for that case. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-10-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Fix kerneldoc warningNishanth Menon1-1/+3
Adding missing properties for kerneldoc (@write) and cleanup of harmless warnings while we are here. kerneldoc warnings: Warning(drivers/irqchip/irq-crossbar.c:27): missing initial short description on line: * struct crossbar_device: crossbar device description Info(drivers/irqchip/irq-crossbar.c:27): Scanning doc for struct Warning(drivers/irqchip/irq-crossbar.c:39): No description found for parameter 'write' 2 warnings Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-9-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Fix sparse and checkpatch warningsNishanth Menon1-3/+4
There is absolutely no need for crossbar driver to expose functions and variables into global namespace. So make them all static Also fix a couple of checkpatch warnings. Fixes sparse warnings: drivers/irqchip/irq-crossbar.c:129:29: warning: symbol 'routable_irq_domain_ops' was not declared. Should it be static? drivers/irqchip/irq-crossbar.c:261:12: warning: symbol 'irqcrossbar_init' was not declared. Should it be static? Checkpatch warnings: WARNING: Prefer kcalloc over kzalloc with multiply + cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL); WARNING: Prefer kcalloc over kzalloc with multiply + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-8-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Remove IS_ERR_VALUE checkNishanth Menon1-3/+3
IS_ERR_VALUE makes sense only *if* there could be valid values in negative error range. But in the cases that we do use it, there is no such case. Just remove the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-7-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Change allocation logic by reversing search for free irqsNishanth Menon1-2/+2
Reverse the search algorithm to ensure that address mapping and IRQ allocation logics are proper. This makes the below bugs visible sooner. class 1. address space errors -> example: reg = <a size_b> ti,max-irqs = is a wrong parameter class 2: irq-reserved list - which decides which entries in the address space is not actually wired in class 3: wrong list of routable-irqs. In general allocating from max to min tends to have benefits in ensuring the different issues that may be present in dts is easily caught at definition time, rather than at a later point in time. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-6-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Initialise the crossbar with a safe valueNishanth Menon1-2/+17
Since crossbar is s/w configurable, the initial settings of the crossbar cannot be assumed to be sane. This implies that: a) On initialization all un-reserved crossbars must be initialized to a known 'safe' value. b) When unmapping the interrupt, the safe value must be written to ensure that the crossbar mapping matches with interrupt controller usage. So provide a safe value in the dt data to map if '0' is not safe for the platform and use it during init and unmap While at this, fix the below checkpatch warning. Fixes checkpatch warning: WARNING: Unnecessary space before function pointer arguments #37: FILE: drivers/irqchip/irq-crossbar.c:37: + void (*write) (int, int); Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-5-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Introduce ti, irqs-skip to skip irqs that bypass crossbarNishanth Menon1-0/+20
When, in the system due to varied reasons, interrupts might be unusable due to hardware behavior, but register maps do exist, then those interrupts should be skipped while mapping irq to crossbars. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-4-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Check for premapped crossbar before allocatingNishanth Menon1-0/+16
If irq_of_parse_and_map is executed twice, the same crossbar is mapped to two different GIC interrupts. This is completely undesirable. Instead, check if the requested crossbar event is pre-allocated and provide that GIC mapping back to caller if already allocated. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-3-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30irqchip: crossbar: Dont use '0' to mark reserved interruptsNishanth Menon1-2/+3
Today '0' is actually reserved, but may not be the same in the future. So, use a flag to mark the GIC interrupts that are reserved. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-2-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-28irqchip: irq-crossbar: Not allocating enough memoryDan Carpenter1-1/+1
We are allocating the size of a pointer and not the size of the data. This will lead to memory corruption. There isn't actually a "cb_device" struct, btw. The code is only able to compile because GCC knows that all pointers are the same size. Fixes: 96ca848ef7ea ('DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sricharan R <r.sricharan@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/20140403072134.GA14286@mwanda Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-05DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IPSricharan R1-0/+208
Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt lines from the subsystems are not needed at the same time, so they have to be muxed to the irq-controller appropriately. In such places a interrupt controllers are preceded by an CROSSBAR that provides flexibility in muxing the device requests to the controller inputs. This driver takes care a allocating a free irq and then configuring the crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should be called right before the irqchip_init, so that it is setup to handle the irqchip callbacks. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 16:58:20 +0000