summaryrefslogtreecommitdiffstats
path: root/drivers/iommu
AgeCommit message (Collapse)AuthorFilesLines
2019-08-21dma-direct: fix zone selection after an unaddressable CMA allocationChristoph Hellwig1-0/+3
The new dma_alloc_contiguous hides if we allocate CMA or regular pages, and thus fails to retry a ZONE_NORMAL allocation if the CMA allocation succeeds but isn't addressable. That means we either fail outright or dip into a small zone that might not succeed either. Thanks to Hillf Danton for debugging this issue. Fixes: b1d2dc009dec ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers") Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
2019-08-14Merge tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-3/+3
Pull dma-mapping fixes from Christoph Hellwig: - fix the handling of the bus_dma_mask in dma_get_required_mask, which caused a regression in this merge window (Lucas Stach) - fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me) - fix dma_mmap_coherent to not cause page attribute mismatches on coherent architectures like x86 (me) * tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix page attributes for dma_mmap_* dma-direct: don't truncate dma_required_mask to bus addressing capabilities dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
2019-08-10dma-mapping: fix page attributes for dma_mmap_*Christoph Hellwig1-3/+3
All the way back to introducing dma_common_mmap we've defaulted to mark the pages as uncached. But this is wrong for DMA coherent devices. Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that flag is only treated special on the alloc side for non-coherent devices. Introduce a new dma_pgprot helper that deals with the check for coherent devices so that only the remapping cases ever reach arch_dma_mmap_pgprot and we thus ensure no aliasing of page attributes happens, which makes the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the remaining ones. Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but we'll phase it out soon. Fixes: 64ccc9c033c6 ("common: dma-mapping: add support for generic dma_mmap_* calls") Reported-by: Shawn Anastasio <shawn@anastas.io> Reported-by: Gavin Li <git@thegavinli.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-08-09iommu/vt-d: Fix possible use-after-free of private domainLu Baolu1-1/+2
Multiple devices might share a private domain. One real example is a pci bridge and all devices behind it. When remove a private domain, make sure that it has been detached from all devices to avoid use-after-free case. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/vt-d: Detach domain before using a private oneLu Baolu1-1/+5
When the default domain of a group doesn't work for a device, the iommu driver will try to use a private domain. The domain which was previously attached to the device must be detached. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Reported-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lkml.org/lkml/2019/8/2/1379 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/dma: Handle SG length overflow betterRobin Murphy1-1/+1
Since scatterlist dimensions are all unsigned ints, in the relatively rare cases where a device's max_segment_size is set to UINT_MAX, then the "cur_len + s_length <= max_len" check in __finalise_sg() will always return true. As a result, the corner case of such a device mapping an excessively large scatterlist which is mergeable to or beyond a total length of 4GB can lead to overflow and a bogus truncated dma_length in the resulting segment. As we already assume that any single segment must be no longer than max_len to begin with, this can easily be addressed by reshuffling the comparison. Fixes: 809eac54cdd6 ("iommu/dma: Implement scatterlist segment merging") Reported-by: Nicolin Chen <nicoleotsuka@gmail.com> Tested-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/vt-d: Correctly check format of page table in debugfsLu Baolu1-1/+1
PASID support and enable bit in the context entry isn't the right indicator for the type of tables (legacy or scalable mode). Check the DMA_RTADDR_SMT bit in the root context pointer instead. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Sai Praneeth <sai.praneeth.prakhya@intel.com> Fixes: dd5142ca5d24b ("iommu/vt-d: Add debugfs support to show scalable mode DMAR table internals") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-06iommu/vt-d: Detach domain when move device out of groupLu Baolu1-0/+2
When removing a device from an iommu group, the domain should be detached from the device. Otherwise, the stale domain info will still be cached by the driver and the driver will refuse to attach any domain to the device again. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Fixes: b7297783c2bb6 ("iommu/vt-d: Remove duplicated code for device hotplug") Reported-and-tested-by: Vlad Buslov <vladbu@mellanox.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Link: https://lkml.org/lkml/2019/7/26/1133 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-06iommu/arm-smmu: Mark expected switch fall-throughAnders Roxell1-2/+2
Now that -Wimplicit-fallthrough is passed to GCC by default, the following warning shows up: ../drivers/iommu/arm-smmu-v3.c: In function ‘arm_smmu_write_strtab_ent’: ../drivers/iommu/arm-smmu-v3.c:1189:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (disable_bypass) ^ ../drivers/iommu/arm-smmu-v3.c:1191:3: note: here default: ^~~~~~~ Rework so that the compiler doesn't warn about fall-through. Make it clearer by calling 'BUG_ON()' when disable_bypass is set, and always 'break;' Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-06iommu/dma: Handle MSI mappings separatelyRobin Murphy1-7/+10
MSI pages must always be mapped into a device's *current* domain, which *might* be the default DMA domain, but might instead be a VFIO domain with its own MSI cookie. This subtlety got accidentally lost in the streamlining of __iommu_dma_map(), but rather than reintroduce more complexity and/or special-casing, it turns out neater to just split this path out entirely. Since iommu_dma_get_msi_page() already duplicates much of what __iommu_dma_map() does, it can easily just make the allocation and mapping calls directly as well. That way we can further streamline the helper back to exclusively operating on DMA domains. Fixes: b61d271e59d7 ("iommu/dma: Move domain lookup into __iommu_dma_{map,unmap}") Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Marc Zyngier <maz@kernel.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-29Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-11/+29
Pull virtio/vhost fixes from Michael Tsirkin: - Fixes in the iommu and balloon devices. - Disable the meta-data optimization for now - I hope we can get it fixed shortly, but there's no point in making users suffer crashes while we are working on that. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: disable metadata prefetch optimization iommu/virtio: Update to most recent specification balloon: fix up comments mm/balloon_compaction: avoid duplicate page removal
2019-07-23iommu/amd: Add support for X2APIC IOMMU interruptsSuthikulpanit, Suravee2-0/+99
AMD IOMMU requires IntCapXT registers to be setup in order to generate its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit APIC destination ID. Without this support, AMD IOMMU MSI interrupts will not be routed correctly when booting the system in X2APIC mode. Cc: Joerg Roedel <joro@8bytes.org> Fixes: 90fcffd9cf5e ('iommu/amd: Add support for IOMMU XT mode') Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Print pasid table entries MSB to LSB in debugfsSai Praneeth Prakhya1-2/+2
Commit dd5142ca5d24 ("iommu/vt-d: Add debugfs support to show scalable mode DMAR table internals") prints content of pasid table entries from LSB to MSB where as other entries are printed MSB to LSB. So, to maintain uniformity among all entries and to not confuse the user, print MSB first. Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Fixes: dd5142ca5d24 ("iommu/vt-d: Add debugfs support to show scalable mode DMAR table internals") Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/virtio: Update to most recent specificationJean-Philippe Brucker1-11/+29
Following specification review a few things were changed in v8 of the virtio-iommu series [1], but have been omitted when merging the base driver. Add them now: * Remove the EXEC flag. * Add feature bit for the MMIO flag. * Change domain_bits to domain_range. * Add NOMEM status flag. [1] https://lore.kernel.org/linux-iommu/20190530170929.19366-1-jean-philippe.brucker@arm.com/ Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver") Reported-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/iova: Remove stale cached32_nodeChris Wilson1-2/+3
Since the cached32_node is allowed to be advanced above dma_32bit_pfn (to provide a shortcut into the limited range), we need to be careful to remove the to be freed node if it is the cached32_node. [ 48.477773] BUG: KASAN: use-after-free in __cached_rbnode_delete_update+0x68/0x110 [ 48.477812] Read of size 8 at addr ffff88870fc19020 by task kworker/u8:1/37 [ 48.477843] [ 48.477879] CPU: 1 PID: 37 Comm: kworker/u8:1 Tainted: G U 5.2.0+ #735 [ 48.477915] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 48.478047] Workqueue: i915 __i915_gem_free_work [i915] [ 48.478075] Call Trace: [ 48.478111] dump_stack+0x5b/0x90 [ 48.478137] print_address_description+0x67/0x237 [ 48.478178] ? __cached_rbnode_delete_update+0x68/0x110 [ 48.478212] __kasan_report.cold.3+0x1c/0x38 [ 48.478240] ? __cached_rbnode_delete_update+0x68/0x110 [ 48.478280] ? __cached_rbnode_delete_update+0x68/0x110 [ 48.478308] __cached_rbnode_delete_update+0x68/0x110 [ 48.478344] private_free_iova+0x2b/0x60 [ 48.478378] iova_magazine_free_pfns+0x46/0xa0 [ 48.478403] free_iova_fast+0x277/0x340 [ 48.478443] fq_ring_free+0x15a/0x1a0 [ 48.478473] queue_iova+0x19c/0x1f0 [ 48.478597] cleanup_page_dma.isra.64+0x62/0xb0 [i915] [ 48.478712] __gen8_ppgtt_cleanup+0x63/0x80 [i915] [ 48.478826] __gen8_ppgtt_cleanup+0x42/0x80 [i915] [ 48.478940] __gen8_ppgtt_clear+0x433/0x4b0 [i915] [ 48.479053] __gen8_ppgtt_clear+0x462/0x4b0 [i915] [ 48.479081] ? __sg_free_table+0x9e/0xf0 [ 48.479116] ? kfree+0x7f/0x150 [ 48.479234] i915_vma_unbind+0x1e2/0x240 [i915] [ 48.479352] i915_vma_destroy+0x3a/0x280 [i915] [ 48.479465] __i915_gem_free_objects+0xf0/0x2d0 [i915] [ 48.479579] __i915_gem_free_work+0x41/0xa0 [i915] [ 48.479607] process_one_work+0x495/0x710 [ 48.479642] worker_thread+0x4c7/0x6f0 [ 48.479687] ? process_one_work+0x710/0x710 [ 48.479724] kthread+0x1b2/0x1d0 [ 48.479774] ? kthread_create_worker_on_cpu+0xa0/0xa0 [ 48.479820] ret_from_fork+0x1f/0x30 [ 48.479864] [ 48.479907] Allocated by task 631: [ 48.479944] save_stack+0x19/0x80 [ 48.479994] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 48.480038] kmem_cache_alloc+0x91/0xf0 [ 48.480082] alloc_iova+0x2b/0x1e0 [ 48.480125] alloc_iova_fast+0x58/0x376 [ 48.480166] intel_alloc_iova+0x90/0xc0 [ 48.480214] intel_map_sg+0xde/0x1f0 [ 48.480343] i915_gem_gtt_prepare_pages+0xb8/0x170 [i915] [ 48.480465] huge_get_pages+0x232/0x2b0 [i915] [ 48.480590] ____i915_gem_object_get_pages+0x40/0xb0 [i915] [ 48.480712] __i915_gem_object_get_pages+0x90/0xa0 [i915] [ 48.480834] i915_gem_object_prepare_write+0x2d6/0x330 [i915] [ 48.480955] create_test_object.isra.54+0x1a9/0x3e0 [i915] [ 48.481075] igt_shared_ctx_exec+0x365/0x3c0 [i915] [ 48.481210] __i915_subtests.cold.4+0x30/0x92 [i915] [ 48.481341] __run_selftests.cold.3+0xa9/0x119 [i915] [ 48.481466] i915_live_selftests+0x3c/0x70 [i915] [ 48.481583] i915_pci_probe+0xe7/0x220 [i915] [ 48.481620] pci_device_probe+0xe0/0x180 [ 48.481665] really_probe+0x163/0x4e0 [ 48.481710] device_driver_attach+0x85/0x90 [ 48.481750] __driver_attach+0xa5/0x180 [ 48.481796] bus_for_each_dev+0xda/0x130 [ 48.481831] bus_add_driver+0x205/0x2e0 [ 48.481882] driver_register+0xca/0x140 [ 48.481927] do_one_initcall+0x6c/0x1af [ 48.481970] do_init_module+0x106/0x350 [ 48.482010] load_module+0x3d2c/0x3ea0 [ 48.482058] __do_sys_finit_module+0x110/0x180 [ 48.482102] do_syscall_64+0x62/0x1f0 [ 48.482147] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.482190] [ 48.482224] Freed by task 37: [ 48.482273] save_stack+0x19/0x80 [ 48.482318] __kasan_slab_free+0x12e/0x180 [ 48.482363] kmem_cache_free+0x70/0x140 [ 48.482406] __free_iova+0x1d/0x30 [ 48.482445] fq_ring_free+0x15a/0x1a0 [ 48.482490] queue_iova+0x19c/0x1f0 [ 48.482624] cleanup_page_dma.isra.64+0x62/0xb0 [i915] [ 48.482749] __gen8_ppgtt_cleanup+0x63/0x80 [i915] [ 48.482873] __gen8_ppgtt_cleanup+0x42/0x80 [i915] [ 48.482999] __gen8_ppgtt_clear+0x433/0x4b0 [i915] [ 48.483123] __gen8_ppgtt_clear+0x462/0x4b0 [i915] [ 48.483250] i915_vma_unbind+0x1e2/0x240 [i915] [ 48.483378] i915_vma_destroy+0x3a/0x280 [i915] [ 48.483500] __i915_gem_free_objects+0xf0/0x2d0 [i915] [ 48.483622] __i915_gem_free_work+0x41/0xa0 [i915] [ 48.483659] process_one_work+0x495/0x710 [ 48.483704] worker_thread+0x4c7/0x6f0 [ 48.483748] kthread+0x1b2/0x1d0 [ 48.483787] ret_from_fork+0x1f/0x30 [ 48.483831] [ 48.483868] The buggy address belongs to the object at ffff88870fc19000 [ 48.483868] which belongs to the cache iommu_iova of size 40 [ 48.483920] The buggy address is located 32 bytes inside of [ 48.483920] 40-byte region [ffff88870fc19000, ffff88870fc19028) [ 48.483964] The buggy address belongs to the page: [ 48.484006] page:ffffea001c3f0600 refcount:1 mapcount:0 mapping:ffff8888181a91c0 index:0x0 compound_mapcount: 0 [ 48.484045] flags: 0x8000000000010200(slab|head) [ 48.484096] raw: 8000000000010200 ffffea001c421a08 ffffea001c447e88 ffff8888181a91c0 [ 48.484141] raw: 0000000000000000 0000000000120012 00000001ffffffff 0000000000000000 [ 48.484188] page dumped because: kasan: bad access detected [ 48.484230] [ 48.484265] Memory state around the buggy address: [ 48.484314] ffff88870fc18f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 48.484361] ffff88870fc18f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 48.484406] >ffff88870fc19000: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc [ 48.484451] ^ [ 48.484494] ffff88870fc19080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 48.484530] ffff88870fc19100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108602 Fixes: e60aa7b53845 ("iommu/iova: Extend rbtree node caching") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Check if domain->pgd was allocatedDmitry Safonov1-3/+5
There is a couple of places where on domain_init() failure domain_exit() is called. While currently domain_init() can fail only if alloc_pgtable_page() has failed. Make domain_exit() check if domain->pgd present, before calling domain_unmap(), as it theoretically should crash on clearing pte entries in dma_pte_clear_level(). Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Don't queue_iova() if there is no flush queueDmitry Safonov2-5/+16
Intel VT-d driver was reworked to use common deferred flushing implementation. Previously there was one global per-cpu flush queue, afterwards - one per domain. Before deferring a flush, the queue should be allocated and initialized. Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush queue. It's probably worth to init it for static or unmanaged domains too, but it may be arguable - I'm leaving it to iommu folks. Prevent queuing an iova flush if the domain doesn't have a queue. The defensive check seems to be worth to keep even if queue would be initialized for all kinds of domains. And is easy backportable. On 4.19.43 stable kernel it has a user-visible effect: previously for devices in si domain there were crashes, on sata devices: BUG: spinlock bad magic on CPU#6, swapper/0/1 lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x45/0x115 intel_unmap+0x107/0x113 intel_unmap_sg+0x6b/0x76 __ata_qc_complete+0x7f/0x103 ata_qc_complete+0x9b/0x26a ata_qc_complete_multiple+0xd0/0xe3 ahci_handle_port_interrupt+0x3ee/0x48a ahci_handle_port_intr+0x73/0xa9 ahci_single_level_irq_intr+0x40/0x60 __handle_irq_event_percpu+0x7f/0x19a handle_irq_event_percpu+0x32/0x72 handle_irq_event+0x38/0x56 handle_edge_irq+0x102/0x121 handle_irq+0x147/0x15c do_IRQ+0x66/0xf2 common_interrupt+0xf/0xf RIP: 0010:__do_softirq+0x8c/0x2df The same for usb devices that use ehci-pci: BUG: spinlock bad magic on CPU#0, swapper/0/1 lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x77/0x145 intel_unmap+0x107/0x113 intel_unmap_page+0xe/0x10 usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d usb_hcd_unmap_urb_for_dma+0x17/0x100 unmap_urb_for_dma+0x22/0x24 __usb_hcd_giveback_urb+0x51/0xc3 usb_giveback_urb_bh+0x97/0xde tasklet_action_common.isra.4+0x5f/0xa1 tasklet_action+0x2d/0x30 __do_softirq+0x138/0x2df irq_exit+0x7d/0x8b smp_apic_timer_interrupt+0x10f/0x151 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39 Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: <stable@vger.kernel.org> # 4.14+ Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Avoid duplicated pci dma alias considerationLu Baolu1-53/+2
As we have abandoned the home-made lazy domain allocation and delegated the DMA domain life cycle up to the default domain mechanism defined in the generic iommu layer, we needn't consider pci alias anymore when mapping/unmapping the context entries. Without this fix, we see kernel NULL pointer dereference during pci device hot-plug test. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Fixes: fa954e6831789 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22Revert "iommu/vt-d: Consolidate domain_init() to avoid duplication"Joerg Roedel1-36/+87
This reverts commit 123b2ffc376e1b3e9e015c75175b61e88a8b8518. This commit reportedly caused boot failures on some systems and needs to be reverted for now. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-21iommu/amd: fix a crash in iova_magazine_free_pfnsQian Cai1-1/+1
The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-0/+1170
Pull virtio, vhost updates from Michael Tsirkin: "Fixes, features, performance: - new iommu device - vhost guest memory access using vmap (just meta-data for now) - minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mmio: add error check for platform_get_irq scsi: virtio_scsi: Use struct_size() helper iommu/virtio: Add event queue iommu/virtio: Add probe request iommu: Add virtio-iommu driver PCI: OF: Initialize dev->fwnode appropriately of: Allow the iommu-map property to omit untranslated devices dt-bindings: virtio: Add virtio-pci-iommu node dt-bindings: virtio-mmio: Add IOMMU description vhost: fix clang build warning vhost: access vq metadata through kernel virtual address vhost: factor out setting vring addr and num vhost: introduce helpers to get the size of metadata area vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() vhost: fine grain userspace memory accessors vhost: generalize adding used elem
2019-07-12Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-10/+4
Pull dma-mapping updates from Christoph Hellwig: - move the USB special case that bounced DMA through a device bar into the USB code instead of handling it in the common DMA code (Laurentiu Tudor and Fredrik Noring) - don't dip into the global CMA pool for single page allocations (Nicolin Chen) - fix a crash when allocating memory for the atomic pool failed during boot (Florian Fainelli) - move support for MIPS-style uncached segments to the common code and use that for MIPS and nios2 (me) - make support for DMA_ATTR_NON_CONSISTENT and DMA_ATTR_NO_KERNEL_MAPPING generic (me) - convert nds32 to the generic remapping allocator (me) * tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits) dma-mapping: mark dma_alloc_need_uncached as __always_inline MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms usb: host: Fix excessive alignment restriction for local memory allocations lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators nios2: use the generic uncached segment support in dma-direct nds32: use the generic remapping allocator for coherent DMA allocations arc: use the generic remapping allocator for coherent DMA allocations dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code dma-mapping: add a dma_alloc_need_uncached helper openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support arc: remove the partial DMA_ATTR_NON_CONSISTENT support arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support ARM: dma-mapping: allow larger DMA mask than supported dma-mapping: truncate dma masks to what dma_addr_t can hold iommu/dma: Apply dma_{alloc,free}_contiguous functions dma-remap: Avoid de-referencing NULL atomic_pool MIPS: use the generic uncached segment support in dma-direct dma-direct: provide generic support for uncached kernel segments au1100fb: fix DMA API abuse ...
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-04Merge branches 'x86/vt-d', 'x86/amd', 'arm/smmu', 'arm/omap', ↵Joerg Roedel38-639/+913
'generic-dma-ops' and 'core' into next
2019-07-04iommu/omap: No need to check return value of debugfs_create functionsGreg Kroah-Hartman1-29/+6
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-04iommu/arm-smmu-v3: Invalidate ATC when detaching a deviceJean-Philippe Brucker1-1/+4
We make the invalid assumption in arm_smmu_detach_dev() that the ATC is clear after calling pci_disable_ats(). For one thing, only enabling the PCIe ATS capability constitutes an implicit invalidation event, so the comment was wrong. More importantly, the ATS capability isn't necessarily disabled by pci_disable_ats() in a PF, if the associated VFs have ATS enabled. Explicitly invalidate all ATC entries in arm_smmu_detach_dev(). The endpoint cannot form new ATC entries because STE.EATS is clear. Fixes: 9ce27afc0830 ("iommu/arm-smmu-v3: Add support for PCI ATS") Reported-by: Manoj Kumar <Manoj.Kumar3@arm.com> Reported-by: Robin Murphy <Robin.Murphy@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-02iommu/arm-smmu-v3: Fix compilation when CONFIG_CMA=nWill Deacon1-0/+6
When compiling a kernel without support for CMA, CONFIG_CMA_ALIGNMENT is not defined which results in the following build failure: In file included from ./include/linux/list.h:9:0 from ./include/linux/kobject.h:19, from ./include/linux/of.h:17 from ./include/linux/irqdomain.h:35, from ./include/linux/acpi.h:13, from drivers/iommu/arm-smmu-v3.c:12: drivers/iommu/arm-smmu-v3.c: In function ‘arm_smmu_device_hw_probe’: drivers/iommu/arm-smmu-v3.c:194:40: error: ‘CONFIG_CMA_ALIGNMENT’ undeclared (first use in this function) #define Q_MAX_SZ_SHIFT (PAGE_SHIFT + CONFIG_CMA_ALIGNMENT) Fix the breakage by capping the maximum queue size based on MAX_ORDER when CMA is not enabled. Reported-by: Zhangshaokun <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will@kernel.org> Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01Merge branch 'arm/renesas' into arm/smmuJoerg Roedel1-62/+125
2019-07-01iommu/vt-d: Cleanup unused variableJacob Pan1-2/+2
Linux IRQ number virq is not used in IRTE allocation. Remove it. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01iommu/amd: Flush not present cache in iommu_map_pageTom Murphy1-4/+16
check if there is a not-present cache present and flush it if there is. Signed-off-by: Tom Murphy <murphyt7@tcd.ie> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01iommu/amd: Only free resources once on init errorKevin Mitchell1-14/+13
When amd_iommu=off was specified on the command line, free_X_resources functions were called immediately after early_amd_iommu_init. They were then called again when amd_iommu_init also failed (as expected). Instead, call them only once: at the end of state_next() whenever there's an error. These functions should be safe to call any time and any number of times. However, since state_next is never called again in an error state, the cleanup will only ever be run once. This also ensures that cleanup code is run as soon as possible after an error is detected rather than waiting for amd_iommu_init() to be called. Signed-off-by: Kevin Mitchell <kevmitch@arista.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01iommu/amd: Move gart fallback to amd_iommu_initKevin Mitchell1-9/+10
The fallback to the GART driver in the case amd_iommu doesn't work was executed in a function called free_iommu_resources, which didn't really make sense. This was even being called twice if amd_iommu=off was specified on the command line. The only complication is that it needs to be verified that amd_iommu has fully relinquished control by calling free_iommu_resources and emptying the amd_iommu_list. Signed-off-by: Kevin Mitchell <kevmitch@arista.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01iommu/amd: Make iommu_disable saferKevin Mitchell1-0/+3
Make it safe to call iommu_disable during early init error conditions before mmio_base is set, but after the struct amd_iommu has been added to the amd_iommu_list. For example, this happens if firmware fails to fill in mmio_phys in the ACPI table leading to a NULL pointer dereference in iommu_feature_disable. Fixes: 2c0ae1720c09c ('iommu/amd: Convert iommu initialization to state machine') Signed-off-by: Kevin Mitchell <kevmitch@arista.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01Merge branch 'for-joerg/arm-smmu/updates' of ↵Joerg Roedel5-44/+76
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
2019-06-25iommu/io-pgtable: Support non-coherent page tablesBjorn Andersson2-5/+14
Describe the memory related to page table walks as non-cacheable for iommu instances that are not DMA coherent. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [will: Use cfg->coherent_walk, fix arm-v7s, ensure outer-shareable for NC] Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25iommu/io-pgtable: Replace IO_PGTABLE_QUIRK_NO_DMA with specific flagWill Deacon5-22/+16
IO_PGTABLE_QUIRK_NO_DMA is a bit of a misnomer, since it's really just an indication of whether or not the page-table walker for the IOMMU is coherent with the CPU caches. Since cache coherency is more than just a quirk, replace the flag with its own field in the io_pgtable_cfg structure. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into generic-dma-opsJoerg Roedel39-395/+54
Linux 5.2-rc6
2019-06-24driver_find_device: Unify the match function with class_find_device()Suzuki K Poulose2-2/+2
The driver_find_device() accepts a match function pointer to filter the devices for lookup, similar to bus/class_find_device(). However, there is a minor difference in the prototype for the match parameter for driver_find_device() with the now unified version accepted by {bus/class}_find_device(), where it doesn't accept a "const" qualifier for the data argument. This prevents us from reusing the generic match functions for driver_find_device(). For this reason, change the prototype of the driver_find_device() to make the "match" parameter in line with {bus/class}_find_device() and adjust its callers to use the const qualifier. Also, we could now promote the "data" parameter to const as we pass it down as a const parameter to the match functions. Cc: Corey Minyard <minyard@acm.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22Merge tag 'iommu-fix-v5.2-rc5' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fix from Joerg Roedel: "Revert a commit from the previous pile of fixes which causes new lockdep splats. It is better to revert it for now and work on a better and more well tested fix" * tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
2019-06-22Revert "iommu/vt-d: Fix lock inversion between iommu->lock and ↵Peter Xu1-4/+3
device_domain_lock" This reverts commit 7560cc3ca7d9d11555f80c830544e463fcdb28b8. With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt: ====================================================== WARNING: possible circular locking dependency detected 5.2.0-rc5 #78 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0 but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){....}: _raw_spin_lock_irqsave+0x3c/0x50 dmar_insert_one_dev_info+0xbb/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 -> #0 (&(&iommu->lock)->rlock){+.+.}: lock_acquire+0x9e/0x170 _raw_spin_lock+0x25/0x30 domain_context_mapping_one+0xa5/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(device_domain_lock); lock(&(&iommu->lock)->rlock); lock(device_domain_lock); lock(&(&iommu->lock)->rlock); *** DEADLOCK *** 2 locks held by swapper/0/1: #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422 #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 stack backtrace: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78 Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018 Call Trace: dump_stack+0x85/0xc0 print_circular_bug.cold.57+0x15c/0x195 __lock_acquire+0x152a/0x1710 lock_acquire+0x9e/0x170 ? domain_context_mapping_one+0xa5/0x4e0 _raw_spin_lock+0x25/0x30 ? domain_context_mapping_one+0xa5/0x4e0 domain_context_mapping_one+0xa5/0x4e0 ? domain_context_mapping_one+0x4e0/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 ? printk+0x58/0x6f ? lockdep_hardirqs_on+0xf0/0x180 ? do_early_param+0x8e/0x8e ? e820__memblock_setup+0x63/0x63 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 ? do_early_param+0x8e/0x8e ? rcu_read_lock_sched_held+0x55/0x60 ? do_early_param+0x8e/0x8e kernel_init_freeable+0x218/0x2c1 ? rest_init+0x230/0x230 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 domain_context_mapping_one() is taking device_domain_lock first then iommu lock, while dmar_insert_one_dev_info() is doing the reverse. That should be introduced by commit: 7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock", 2019-05-27) So far I still cannot figure out how the previous deadlock was triggered (I cannot find iommu lock taken before calling of iommu_flush_dev_iotlb()), however I'm pretty sure that that change should be incomplete at least because it does not fix all the places so we're still taking the locks in different orders, while reverting that commit is very clean to me so far that we should always take device_domain_lock first then the iommu lock. We can continue to try to find the real culprit mentioned in 7560cc3ca7d9, but for now I think we should revert it to fix current breakage. CC: Joerg Roedel <joro@8bytes.org> CC: Lu Baolu <baolu.lu@linux.intel.com> CC: dave.jiang@intel.com Signed-off-by: Peter Xu <peterx@redhat.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner8-32/+8
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner5-60/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18iommu/io-pgtable-arm: Add support to use system cacheVivek Gautam1-1/+8
Few Qualcomm platforms such as, sdm845 have an additional outer cache called as System cache, aka. Last level cache (LLC) that allows non-coherent devices to upgrade to using caching. This cache sits right before the DDR, and is tightly coupled with the memory controller. The clients using this cache request their slices from this system cache, make it active, and can then start using it. There is a fundamental assumption that non-coherent devices can't access caches. This change adds an exception where they *can* use some level of cache despite still being non-coherent overall. The coherent devices that use cacheable memory, and CPU make use of this system cache by default. Looking at memory types, we have following - a) Normal uncached :- MAIR 0x44, inner non-cacheable, outer non-cacheable; b) Normal cached :- MAIR 0xff, inner read write-back non-transient, outer read write-back non-transient; attribute setting for coherenet I/O devices. and, for non-coherent i/o devices that can allocate in system cache another type gets added - c) Normal sys-cached :- MAIR 0xf4, inner non-cacheable, outer read write-back non-transient Coherent I/O devices use system cache by marking the memory as normal cached. Non-coherent I/O devices should mark the memory as normal sys-cached in page tables to use system cache. Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-18iommu/arm-smmu-v3: Increase maximum size of queuesWill Deacon1-16/+38
We've been artificially limiting the size of our queues to 4k so that we don't end up allocating huge amounts of physically-contiguous memory at probe time. However, 4k is only enough for 256 commands in the command queue, so instead let's try to allocate the largest queue that the SMMU supports, retrying with a smaller size if the allocation fails. The caveat here is that we have to limit our upper bound based on CONFIG_CMA_ALIGNMENT to ensure that our queue allocations remain natually aligned, which is required by the SMMU architecture. Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-18iommu/vt-d: Silence a variable set but not usedQian Cai1-1/+2
The commit "iommu/vt-d: Probe DMA-capable ACPI name space devices" introduced a compilation warning due to the "iommu" variable in for_each_active_iommu() but never used the for each element, i.e, "drhd->iommu". drivers/iommu/intel-iommu.c: In function 'probe_acpi_namespace_devices': drivers/iommu/intel-iommu.c:4639:22: warning: variable 'iommu' set but not used [-Wunused-but-set-variable] struct intel_iommu *iommu; Silence the warning the same way as in the commit d3ed71e5cc50 ("drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-18iommu/vt-d: Remove an unused variable "length"Qian Cai1-3/+0
The linux-next commit "iommu/vt-d: Duplicate iommu_resv_region objects per device list" [1] left out an unused variable, drivers/iommu/intel-iommu.c: In function 'dmar_parse_one_rmrr': drivers/iommu/intel-iommu.c:4014:9: warning: variable 'length' set but not used [-Wunused-but-set-variable] [1] https://lore.kernel.org/patchwork/patch/1083073/ Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-18iommu: Fix integer truncationArnd Bergmann1-2/+2
On 32-bit architectures, phys_addr_t may be different from dma_add_t, both smaller and bigger. This can lead to an overflow during an assignment that clang warns about: drivers/iommu/dma-iommu.c:230:10: error: implicit conversion from 'dma_addr_t' (aka 'unsigned long long') to 'phys_addr_t' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion] Use phys_addr_t here because that is the type that the variable was declared as. Fixes: aadad097cd46 ("iommu/dma: Reserve IOVA for PCIe inaccessible DMA address") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-14Merge tag 'iommu-fixes-v5.2-rc4' of ↵Linus Torvalds4-8/+18
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - three fixes for Intel VT-d to fix a potential dead-lock, a formatting fix and a bit setting fix - one fix for the ARM-SMMU to make it work on some platforms with sub-optimal SMMU emulation * tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Avoid constant zero in TLBI writes iommu/vt-d: Set the right field for Page Walk Snoop iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock iommu: Add missing new line for dma type
2019-06-14iommu/dma: Apply dma_{alloc,free}_contiguous functionsNicolin Chen1-10/+4
This patch replaces dma_{alloc,release}_from_contiguous() with dma_{alloc,free}_contiguous() to simplify those function calls. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-12iommu/vt-d: Consolidate domain_init() to avoid duplicationLu Baolu1-87/+36
The domain_init() and md_domain_init() do almost the same job. Consolidate them to avoid duplication. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>