summaryrefslogtreecommitdiffstats
path: root/drivers/iommu/omap-iommu.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-18iommu/omap: Add registration for DT fwnode pointerTero Kristo via iommu1-0/+1
The fwnode pointer must be passed to the iommu core, so that the core can map the IOMMU towards device requests properly. Without this, some IOMMU clients like OMAP remoteproc will fail the iommu configuration multiple times with -EPROBE_DEFER, which will eventually be ignored with a kernel warning banner. Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200424145828.3159-1-t-kristo@ti.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-18iommu/omap: Add check for iommu group when no IOMMU in useTero Kristo via iommu1-0/+3
Most of the devices in OMAP family of SoCs are not using IOMMU. The patch for converting the OMAP IOMMU to use generic IOMMU bus probe functionality failed to add a check for this, so add it here. Fixes: c822b37cac48 ("iommu/omap: Remove orphan_dev tracking") Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200518111057.23140-1-t-kristo@ti.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/omap: Convert to probe/release_device() call-backsJoerg Roedel1-36/+13
Convert the OMAP IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-30-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/omap: Remove orphan_dev trackingJoerg Roedel1-50/+4
Remove the tracking of device which could not be probed because their IOMMU is not probed yet. Replace it with a call to bus_iommu_probe() when a new IOMMU is probed. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-29-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-04iommu/omap: Fix printing format for size_t on 64-bitKrzysztof Kozlowski1-4/+4
Print size_t as %zu or %zx to fix -Wformat warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/iommu/omap-iommu.c: In function ‘flush_iotlb_page’: drivers/iommu/omap-iommu.c:437:47: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘size_t {aka long unsigned int}’ [-Wformat=] Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-04iommu/omap: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bitKrzysztof Kozlowski1-1/+1
pointers should be casted to unsigned long to avoid -Wpointer-to-int-cast warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/iommu/omap-iommu.c: In function ‘omap2_iommu_enable’: drivers/iommu/omap-iommu.c:170:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) ^ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-15iommu: Add gfp parameter to iommu_ops::mapTom Murphy1-1/+1
Add a gfp_t parameter to the iommu_ops::map function. Remove the needless locking in the AMD iommu driver. The iommu_ops::map function (or the iommu_map function which calls it) was always supposed to be sleepable (according to Joerg's comment in this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so should probably have had a "might_sleep()" since it was written. However currently the dma-iommu api can call iommu_map in an atomic context, which it shouldn't do. This doesn't cause any problems because any iommu driver which uses the dma-iommu api uses gfp_atomic in it's iommu_ops::map function. But doing this wastes the memory allocators atomic pools. Signed-off-by: Tom Murphy <murphyt7@tcd.ie> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', ↵Joerg Roedel1-30/+294
'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next
2019-09-06iommu/omap: Mark pm functions __maybe_unusedArnd Bergmann1-2/+2
The runtime_pm functions are unused when CONFIG_PM is disabled: drivers/iommu/omap-iommu.c:1022:12: error: unused function 'omap_iommu_runtime_suspend' [-Werror,-Wunused-function] static int omap_iommu_runtime_suspend(struct device *dev) drivers/iommu/omap-iommu.c:1064:12: error: unused function 'omap_iommu_runtime_resume' [-Werror,-Wunused-function] static int omap_iommu_runtime_resume(struct device *dev) Mark them as __maybe_unused to let gcc silently drop them instead of warning. Fixes: db8918f61d51 ("iommu/omap: streamline enable/disable through runtime pm callbacks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-19iommu/omap: Use the correct type for SLAB_HWCACHE_ALIGNSuman Anna1-1/+1
The macro SLAB_HWCACHE_ALIGN is of type slab_flags_t, but is currently assigned in the OMAP IOMMU driver using a unsigned long variable. This generates a sparse warning around the type check. Fix this by defining the variable flags using the correct type. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/omap: remove pm_runtime_irq_safe flag for OMAP IOMMUsTero Kristo1-1/+0
This is not needed for anything, and prevents proper PM transitions for parent devices which is bad in case of ti-sysc; this effectively kills PM completely. Thus, remove the flag. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/omap: add support for late attachment of iommu devicesTero Kristo1-3/+53
Current implementation of OMAP IOMMU enforces strict ordering of device probe, initiated by iommu and followed by remoteproc later. This doesn't work too well with the new setup done with ti-sysc changes which may have the devices probed at pretty much any order. To overcome this limitation, if iommu has not been probed yet when a consumer tries to attach to it, add the device to orphan device list which will be parsed during iommu probe to see if any orphan devices should be attached. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/omap: introduce new API for runtime suspend/resume controlSuman Anna1-0/+58
This patch adds the support for the OMAP IOMMUs to be suspended during the auto suspend/resume of the OMAP remoteproc devices. The remote processors are auto suspended after a certain time of idle or inactivity period. This is done by introducing two new API, omap_iommu_domain_deactivate() and omap_iommu_domain_activate() to allow the client users/master devices of the IOMMU devices to deactivate & activate the IOMMU devices from their runtime suspend/resume operations. There is no API exposed by the IOMMU layer at present, and so these new API are added directly in the OMAP IOMMU driver to minimize framework changes. The API simply decrements and increments the runtime usage count of the IOMMU devices and let the context be saved/restored using the existing runtime pm callbacks. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/omap: Add system suspend/resume supportSuman Anna1-0/+26
The MMU registers for the remote processors lose their context in Open Switch Retention (OSWR) or device OFF modes. Hence, the context of the IOMMU needs to be saved before it is put into any of these lower power state (OSWR/OFF) and restored before it is powered up to ON again. The IOMMUs need to be active as long as the client devices that are present behind the IOMMU are active. This patch adds the dev_pm_ops callbacks to provide the system suspend/resume functionality through the appropriate runtime PM callbacks. The PM runtime_resume and runtime_suspend callbacks are already used to enable, configure and disable the IOMMUs during the attaching and detaching of the client devices to the IOMMUs, and the new PM callbacks reuse the same code by invoking the pm_runtime_force_suspend() and pm_runtime_force_resume() API. The functionality in dev_pm_ops .prepare() checks if the IOMMU device was already runtime suspended, and skips invoking the suspend/resume PM callbacks. The suspend/resume PM callbacks are plugged in through the 'late' pm ops to ensure that the IOMMU devices will be suspended only after its master devices (remoteproc devices) are suspended and restored before them. NOTE: There are two other existing API, omap_iommu_save_ctx() and omap_iommu_restore_ctx(). These are left as is to support suspend/resume of devices on legacy OMAP3 SoC. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/omap: add logic to save/restore locked TLBsSuman Anna1-3/+58
The MMUs provide a mechanism to lock TLB entries to avoid eviction and fetching of frequently used page table entries. These TLBs lose context when the MMUs are turned OFF. Add the logic to save and restore these locked TLBS during suspend and resume respectively. There are no locked TLBs during initial power ON, and they need not be saved during final shutdown. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/omap: streamline enable/disable through runtime pm callbacksSuman Anna1-40/+99
The OMAP IOMMU devices are typically present within the respective client processor subsystem and have their own dedicated hard-reset line. Enabling an IOMMU requires the reset line to be deasserted and the clocks to be enabled before programming the necessary IOMMU registers. The IOMMU disable sequence follow the reverse order of enabling. The OMAP IOMMU driver programs the reset lines through pdata ops to invoke the omap_device_assert/deassert_hardreset API. The clocks are managed through the pm_runtime framework, and the callbacks associated with the device's pm_domain, implemented in the omap_device layer. Streamline the enable and disable sequences in the OMAP IOMMU driver by implementing all the above operations within the runtime pm callbacks. All the OMAP devices have device pm_domain callbacks plugged in the omap_device layer for automatic runtime management of the clocks. Invoking the reset management functions within the runtime pm callbacks in OMAP IOMMU driver therefore requires that the default device's pm domain callbacks in the omap_device layer be reset, as the ordering sequence for managing the reset lines and clocks from the pm_domain callbacks don't gel well with the implementation in the IOMMU driver callbacks. The omap_device_enable/omap_device_idle functions are invoked through the newly added pdata ops. Consolidating all the device management sequences within the runtime pm callbacks allows the driver to easily support both system suspend/resume and runtime suspend/resume using common code. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/omap: fix boot issue on remoteprocs with AMMU/UnicacheSuman Anna1-0/+17
Support has been added to the OMAP IOMMU driver to fix a boot hang issue on OMAP remoteprocs with AMMU/Unicache, caused by an improper AMMU/Unicache state upon initial deassertion of the processor reset. The issue is described in detail in the next three paragraphs. All the Cortex M3/M4 IPU processor subsystems in OMAP SoCs have a AMMU/Unicache IP that dictates the memory attributes for addresses seen by the processor cores. The AMMU/Unicache is configured/enabled by the SCACHE_CONFIG.BYPASS bit - a value of 1 enables the cache and mandates all addresses accessed by M3/M4 be defined in the AMMU. This bit is not programmable from the host processor. The M3/M4 boot sequence starts out with the AMMU/Unicache in disabled state, and SYS/BIOS programs the AMMU regions and enables the Unicache during one of its initial boot steps. This SCACHE_CONFIG.BYPASS bit is however enabled by default whenever a RET reset is applied to the IP, irrespective of whether it was previously enabled or not. The AMMU registers lose their context whenever this reset is applied. The reset is effective as long as the MMU portion of the subsystem is enabled and clocked. This behavior is common to all the IPU and DSP subsystems that have an AMMU/Unicache. The IPU boot sequence involves enabling and programming the MMU, and loading the processor and releasing the reset(s) for the processor. The PM setup code currently sets the target state for most of the power domains to RET. The L2 MMU can be enabled, programmed and accessed properly just fine with the domain in hardware supervised mode, while the power domain goes through a RET->ON->RET transition during the programming sequence. However, the ON->RET transition asserts a RET reset, and the SCACHE_CONFIG.BYPASS bit gets auto-set. An AMMU fault is thrown immediately when the M3/M4 core's reset is released since the first instruction address itself will not be defined in any valid AMMU regions. The ON->RET transition happens automatically on the power domain after enabling the iommu due to the hardware supervised mode. This patch adds and invokes the .set_pwrdm_constraint pdata ops, if present, during the OMAP IOMMU enable and disable functions to resolve the above boot hang issue. The ops will allow to invoke a mach-omap2 layer API pwrdm_set_next_pwrst() in a multi-arch kernel environment. The ops also returns the current power domain state while enforcing the constraint so that the driver can store it and use it to set back the power domain state while releasing the constraint. The pdata ops implementation restricts the target power domain to ON during enable, and back to the original power domain state during disable, and thereby eliminating the conditions for the boot issue. The implementation is effective only when the original power domain state is either RET or OFF, and is a no-op when it is ON or INACTIVE. The .set_pwrdm_constraint ops need to be plugged in pdata-quirks for the affected remote processors to be able to boot properly. Note that the current issue is seen only on kernels with the affected power domains programmed to enter RET. For eg., IPU1 on DRA7xx is in a separate domain and is susceptible to this bug, while the IPU2 subsystem is within CORE power domain, and CORE RET is not supported on this SoC. IPUs on OMAP4 and OMAP5 are also susceptible since they are in CORE power domain, and CORE RET is a valid power target on these SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-29iommu: Pass struct iommu_iotlb_gather to ->unmap() and ->iotlb_sync()Will Deacon1-1/+1
To allow IOMMU drivers to batch up TLB flushing operations and postpone them until ->iotlb_sync() is called, extend the prototypes for the ->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to the current iommu_iotlb_gather structure. All affected IOMMU drivers are updated, but there should be no functional change since the extra parameter is ignored for now. Signed-off-by: Will Deacon <will@kernel.org>
2019-07-04Merge branches 'x86/vt-d', 'x86/amd', 'arm/smmu', 'arm/omap', ↵Joerg Roedel1-6/+2
'generic-dma-ops' and 'core' into next
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-26iommu/omap: Use dev_get_drvdata()Kefeng Wang1-2/+1
Using dev_get_drvdata directly. Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-08-08Merge branches 'arm/shmobile', 'arm/renesas', 'arm/msm', 'arm/smmu', ↵Joerg Roedel1-3/+2
'arm/omap', 'x86/amd', 'x86/vt-d' and 'core' into next
2018-08-08iommu/omap: Fix cache flushes on L2 table entriesRalf Goebel1-2/+2
The base address used for DMA operations on the second-level table did incorrectly include the offset for the table entry. The offset was then added again which lead to incorrect behavior. Operations on the L1 table are not affected. The calculation of the base address is changed to point to the beginning of the L2 table. Fixes: bfee0cf0ee1d ("iommu/omap: Use DMA-API for performing cache flushes") Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Ralf Goebel <ralf.goebel@imago-technologies.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-08-08iommu: Remove the ->map_sg indirectionChristoph Hellwig1-1/+0
All iommu drivers use the default_iommu_map_sg implementation, and there is no good reason to ever override it. Just expose it as iommu_map_sg directly and remove the indirection, specially in our post-spectre world where indirect calls are horribly expensive. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-15iommu/omap: Increase group ref in .device_group()Jeffy Chen1-1/+1
Increase group refcounting in omap_iommu_device_group(). Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-19iommu/omap: Add support to program multiple iommusSuman Anna1-87/+271
A client user instantiates and attaches to an iommu_domain to program the OMAP IOMMU associated with the domain. The iommus programmed by a client user are bound with the iommu_domain through the user's device archdata. The OMAP IOMMU driver currently supports only one IOMMU per IOMMU domain per user. The OMAP IOMMU driver has been enhanced to support allowing multiple IOMMUs to be programmed by a single client user. This support is being added mainly to handle the DSP subsystems on the DRA7xx SoCs, which have two MMUs within the same subsystem. These MMUs provide translations for a processor core port and an internal EDMA port. This support allows both the MMUs to be programmed together, but with each one retaining it's own internal state objects. The internal EDMA block is managed by the software running on the DSPs, and this design provides on-par functionality with previous generation OMAP DSPs where the EDMA and the DSP core shared the same MMU. The multiple iommus are expected to be provided through a sentinel terminated array of omap_iommu_arch_data objects through the client user's device archdata. The OMAP driver core is enhanced to loop through the array of attached iommus and program them for all common operations. The sentinel-terminated logic is used so as to not change the omap_iommu_arch_data structure. NOTE: 1. The IOMMU group and IOMMU core registration is done only for the DSP processor core MMU even though both MMUs are represented by their own platform device and are probed individually. The IOMMU device linking uses this registered MMU device. The struct iommu_device for the second MMU is not used even though memory for it is allocated. 2. The OMAP IOMMU debugfs code still continues to operate on individual IOMMU objects. Signed-off-by: Suman Anna <s-anna@ti.com> [t-kristo@ti.com: ported support to 4.13 based kernel] Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-19iommu/omap: Change the attach detection logicSuman Anna1-6/+11
The OMAP IOMMU driver allows only a single device (eg: a rproc device) to be attached per domain. The current attach detection logic relies on a check for an attached iommu for the respective client device. Change this logic to use the client device pointer instead in preparation for supporting multiple iommu devices to be bound to a single iommu domain, and thereby to a client device. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-04iommu/omap: Use DMA-API for performing cache flushesJosue Albarran1-44/+79
The OMAP IOMMU driver was using ARM assembly code directly for flushing the MMU page table entries from the caches. This caused MMU faults on OMAP4 (Cortex-A9 based SoCs) as L2 caches were not handled due to the presence of a PL310 L2 Cache Controller. These faults were however not seen on OMAP5/DRA7 SoCs (Cortex-A15 based SoCs). The OMAP IOMMU driver is adapted to use the DMA Streaming API instead now to flush the page table/directory table entries from the CPU caches. This ensures that the devices always see the updated page table entries. The outer caches are now addressed automatically with the usage of the DMA API. Signed-off-by: Josue Albarran <j-albarran@ti.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-04iommu/omap: Fix disabling of MMU upon a faultFernando Guzman Lugo1-1/+1
The IOMMU framework lets its client users be notified on a MMU fault and allows them to either handle the interrupt by dynamic reloading of an appropriate TLB/PTE for the offending fault address or to completely restart/recovery the device and its IOMMU. The OMAP remoteproc driver performs the latter option, and does so after unwinding the previous mappings. The OMAP IOMMU fault handler however disables the MMU and cuts off the clock upon a MMU fault at present, resulting in an interconnect abort during any subsequent operation that touches the MMU registers. So, disable the IP-level fault interrupts instead of disabling the MMU, to allow continued MMU register operations as well as to avoid getting interrupted again. Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com> [s-anna@ti.com: add commit description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Josue Albarran <j-albarran@ti.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-06-28iommu/omap: Return ERR_PTR in device_group call-backJoerg Roedel1-1/+1
Make sure that the device_group callback returns an ERR_PTR instead of NULL. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/omap: Add iommu-group supportJoerg Roedel1-1/+38
Support for IOMMU groups will become mandatory for drivers, so add it to the omap iommu driver. Signed-off-by: Joerg Roedel <jroedel@suse.de> [s-anna@ti.com: minor error cleanups] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/omap: Make use of 'struct iommu_device'Joerg Roedel1-0/+30
Modify the driver to register individual iommus and establish links between devices and iommus in sysfs. Signed-off-by: Joerg Roedel <jroedel@suse.de> [s-anna@ti.com: fix some cleanup issues during failures] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/omap: Store iommu_dev pointer in arch_dataJoerg Roedel1-33/+23
Instead of finding the matching IOMMU for a device using string comparision functions, store the pointer to the iommu_dev in arch_data during the omap_iommu_add_device callback and reset it during the omap_iommu_remove_device callback functions. Signed-off-by: Joerg Roedel <jroedel@suse.de> [s-anna@ti.com: few minor cleanups] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/omap: Move data structures to omap-iommu.hJoerg Roedel1-16/+0
The internal data-structures are scattered over various header and C files. Consolidate them in omap-iommu.h. While at this, add the kerneldoc comment for the missing iommu domain variable and revise the iommu_arch_data name. Signed-off-by: Joerg Roedel <jroedel@suse.de> [s-anna@ti.com: revise kerneldoc comments] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/omap: Drop legacy-style device supportSuman Anna1-16/+14
All the supported boards that have OMAP IOMMU devices do support DT boot only now. So, drop the support for the non-DT legacy-style devices from the OMAP IOMMU driver. Couple of the fields from the iommu platform data would no longer be required, so they have also been cleaned up. The IOMMU platform data is still needed though for performing reset management properly in a multi-arch environment. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/omap: Register driver before setting IOMMU opsSuman Anna1-3/+18
Move the registration of the OMAP IOMMU platform driver before setting the IOMMU callbacks on the platform bus. This causes the IOMMU devices to be probed first before the .add_device() callback is invoked for all registered devices, and allows the iommu_group support to be added to the OMAP IOMMU driver. While at this, also check for the return status from bus_set_iommu. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-05iommu/omap: Use WARN_ON for page table alignment checkSuman Anna1-1/+4
The OMAP IOMMU page table needs to be aligned on a 16K boundary, and the current code uses a BUG_ON on the alignment sanity check in the .domain_alloc() ops implementation. Replace this with a less severe WARN_ON and bail out gracefully. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-05iommu/omap: Replace BUG() in iopgtable_store_entry_core()Suman Anna1-1/+3
The iopgtable_store_entry_core() function uses a BUG() statement for an unsupported page size entry programming. Replace this with a less severe WARN_ON() and perform a graceful bailout on error. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-05iommu/omap: Remove iopgtable_clear_entry_all() from driver removeSuman Anna1-1/+0
The function iopgtable_clear_entry_all() is used for clearing all the page table entries. These entries are neither created nor initialized during the OMAP IOMMU driver probe, and are managed only when a client device attaches to the IOMMU. So, there is no need to invoke this function on a driver remove. Removing this fixes a NULL pointer dereference crash if the IOMMU device is unbound from the driver with no client device attached to the IOMMU device. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-14iommu/omap: Add support for configuring dsp iommus on DRA7xxSuman Anna1-0/+58
The DSP MMUs on DRA7xx SoC requires configuring an additional MMU_CONFIG register present in the DSP_SYSTEM sub module. This setting dictates whether the DSP Core's MDMA and EDMA traffic is routed through the respective MMU or not. Add the support to the OMAP iommu driver so that the traffic is not bypassed when enabling the MMUs. The MMU_CONFIG register has two different bits for enabling each of these two MMUs present in the DSP processor sub-system on DRA7xx. An id field is added to the OMAP iommu object to identify and enable each IOMMU. The id information and the DSP_SYSTEM.MMU_CONFIG register programming is achieved through the processing of the optional "ti,syscon-mmuconfig" property. A proper value is assigned to the id field only when this property is present. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-03iommu/omap: Align code with open parenthesisSuman Anna1-12/+11
Fix all the occurrences of the following check warning generated with the checkpatch --strict option: "CHECK: Alignment should match open parenthesis" Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-03iommu/omap: Remove unnecessary error traces on alloc failuresSuman Anna1-6/+2
Fix couple of checkpatch warnings of the type, "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-03iommu/omap: Move debugfs functions to omap-iommu-debug.cSuman Anna1-145/+3
The main OMAP IOMMU driver file has some helper functions used by the OMAP IOMMU debugfs functionality, and there is already a dedicated source file omap-iommu-debug.c dealing with these debugfs routines. Move all these functions to the omap-iommu-debug.c file, so that all the debugfs related routines are in one place. The move required exposing some new functions and moving some definitions to the internal omap-iommu.h header file. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-03iommu/omap: Remove all module referencesSuman Anna1-18/+1
The OMAP IOMMU driver has been adapted to the IOMMU framework for a while now, and it does not support being built as a module anymore. So, remove all the module references from the OMAP IOMMU driver. While at it, also relocate a comment around the subsys_initcall to avoid a checkpatch strict warning about using a blank line after function/struct/union/enum declarations. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-03-31iommu/omap: Make use of domain_alloc and domain_freeJoerg Roedel1-20/+29
Implement the new domain_alloc and domain_free call-backs and remove the old domain_init/destroy ones. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-02-25iommu/omap: Play nice in multi-platform buildsThierry Reding1-0/+7
The OMAP IOMMU driver unconditionally executes code and registers a struct iommu_ops with the platform bus irrespective of whether it runs on an OMAP SoC or not. This causes problems in multi-platform kernels where drivers for other SoCs will no longer be able to register their own struct iommu_ops or even try to use a struct iommu_ops for an IOMMU that obviously isn't there. The smallest fix I could think of is to check for the existence of any OMAP IOMMU devices in the device tree and skip initialization otherwise. This fixes a problem on Tegra20 where the DRM driver will try to use the obviously non-existent OMAP IOMMU. Reported-by: Nicolas Chauvet <kwizart@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Suman Anna <s-anna@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-01-30iommu/omap: Print phys_addr_t using %paJoerg Roedel1-1/+1
Fixes this compile warning: drivers/iommu/omap-iommu.c: In function 'omap_iommu_map': drivers/iommu/omap-iommu.c:1139:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t' [-Wformat=] dev_dbg(dev, "mapping da 0x%lx to pa 0x%x size 0x%x\n", da, pa, bytes); Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-12-02Merge branches 'arm/omap', 'arm/msm', 'arm/rockchip', 'arm/renesas', ↵Joerg Roedel1-0/+1
'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next Conflicts: drivers/iommu/arm-smmu.c
2014-11-04iommu/omap: Use dev_get_platdata()Kiran Padwal1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 20:58:01 +0000