summaryrefslogtreecommitdiffstats
path: root/drivers/iommu/iommu.c
AgeCommit message (Collapse)AuthorFilesLines
2021-11-04Merge tag 'iommu-updates-v5.16' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Intel IOMMU Updates fro Lu Baolu: - Dump DMAR translation structure when DMA fault occurs - An optimization in the page table manipulation code - Use second level for GPA->HPA translation - Various cleanups - Arm SMMU Updates from Will - Minor optimisations to SMMUv3 command creation and submission - Numerous new compatible string for Qualcomm SMMUv2 implementations - Fixes for the SWIOTLB based implemenation of dma-iommu code for untrusted devices - Add support for r8a779a0 to the Renesas IOMMU driver and DT matching code for r8a77980 - A couple of cleanups and fixes for the Apple DART IOMMU driver - Make use of generic report_iommu_fault() interface in the AMD IOMMU driver - Various smaller fixes and cleanups * tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits) iommu/dma: Fix incorrect error return on iommu deferred attach iommu/dart: Initialize DART_STREAMS_ENABLE iommu/dma: Use kvcalloc() instead of kvzalloc() iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable iommu/dart: Use kmemdup instead of kzalloc and memcpy iommu/vt-d: Avoid duplicate removing in __domain_mapping() iommu/vt-d: Convert the return type of first_pte_in_page to bool iommu/vt-d: Clean up unused PASID updating functions iommu/vt-d: Delete dev_has_feat callback iommu/vt-d: Use second level for GPA->HPA translation iommu/vt-d: Check FL and SL capability sanity in scalable mode iommu/vt-d: Remove duplicate identity domain flag iommu/vt-d: Dump DMAR translation structure when DMA fault occurs iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option iommu/arm-smmu-qcom: Request direct mapping for modem device iommu: arm-smmu-qcom: Add compatible for QCM2290 dt-bindings: arm-smmu: Add compatible for QCM2290 SoC iommu/arm-smmu-qcom: Add SM6350 SMMU compatible dt-bindings: arm-smmu: Add compatible for SM6350 SoC iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd() ...
2021-10-04treewide: Replace the use of mem_encrypt_active() with cc_platform_has()Tom Lendacky1-1/+2
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with the CC_ATTR_MEM_ENCRYPT attribute. Remove the implementation of mem_encrypt_active() across all arches. For s390, since the default implementation of the cc_platform_has() matches the s390 implementation of mem_encrypt_active(), cc_platform_has() does not need to be implemented in s390 (the config option ARCH_HAS_CC_PLATFORM is not set). Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
2021-09-28iommu/dma: Unexport IOVA cookie managementRobin Murphy1-2/+1
IOVA cookies are now got and put by core code, so we no longer need to export these to modular drivers. The export for getting MSI cookies stays, since VFIO can still be a module, but it was already relying on someone else putting them, so that aspect is unaffected. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/ef89db54a27df7d8bc0af094c7d7b204fd61774c.1631531973.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-03Merge tag 'iommu-updates-v5.15' of ↵Linus Torvalds1-52/+143
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - New DART IOMMU driver for Apple Silicon M1 chips - Optimizations for iommu_[map/unmap] performance - Selective TLB flush support for the AMD IOMMU driver to make it more efficient on emulated IOMMUs - Rework IOVA setup and default domain type setting to move more code out of IOMMU drivers and to support runtime switching between certain types of default domains - VT-d Updates from Lu Baolu: - Update the virtual command related registers - Enable Intel IOMMU scalable mode by default - Preset A/D bits for user space DMA usage - Allow devices to have more than 32 outstanding PRs - Various cleanups - ARM SMMU Updates from Will Deacon: SMMUv3: - Minor optimisation to avoid zeroing struct members on CMD submission - Increased use of batched commands to reduce submission latency - Refactoring in preparation for ECMDQ support SMMUv2: - Fix races when probing devices with identical StreamIDs - Optimise walk cache flushing for Qualcomm implementations - Allow deep sleep states for some Qualcomm SoCs with shared clocks - Various smaller optimizations, cleanups, and fixes * tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits) iommu/io-pgtable: Abstract iommu_iotlb_gather access iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group() iommu/vt-d: Add present bit check in pasid entry setup helpers iommu/vt-d: Use pasid_pte_is_present() helper function iommu/vt-d: Drop the kernel doc annotation iommu/vt-d: Allow devices to have more than 32 outstanding PRs iommu/vt-d: Preset A/D bits for user space DMA usage iommu/vt-d: Enable Intel IOMMU scalable mode by default iommu/vt-d: Refactor Kconfig a bit iommu/vt-d: Remove unnecessary oom message iommu/vt-d: Update the virtual command related registers iommu: Allow enabling non-strict mode dynamically iommu: Merge strictness and domain type configs iommu: Only log strictness for DMA domains iommu: Expose DMA domain strictness via sysfs iommu: Express DMA strictness via the domain type iommu/vt-d: Prepare for multiple DMA domain types iommu/arm-smmu: Prepare for multiple DMA domain types iommu/amd: Prepare for multiple DMA domain types iommu: Introduce explicit type for non-strict DMA domains ...
2021-09-02Merge tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-8/+7
Pull dma-mapping updates from Christoph Hellwig: - fix debugfs initialization order (Anthony Iliopoulos) - use memory_intersects() directly (Kefeng Wang) - allow to return specific errors from ->map_sg (Logan Gunthorpe, Martin Oliveira) - turn the dma_map_sg return value into an unsigned int (me) - provide a common global coherent pool іmplementation (me) * tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits) hexagon: use the generic global coherent pool dma-mapping: make the global coherent pool conditional dma-mapping: add a dma_init_global_coherent helper dma-mapping: simplify dma_init_coherent_memory dma-mapping: allow using the global coherent pool for !ARM ARM/nommu: use the generic dma-direct code for non-coherent devices dma-direct: add support for dma_coherent_default_memory dma-mapping: return an unsigned int from dma_map_sg{,_attrs} dma-mapping: disallow .map_sg operations from returning zero on error dma-mapping: return error code from dma_dummy_map_sg() x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR x86/amd_gart: return error code from gart_map_sg() xen: swiotlb: return error code from xen_swiotlb_map_sg() parisc: return error code from .map_sg() ops sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR sparc/iommu: return error codes from .map_sg() ops s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR s390/pci: return error code from s390_dma_map_sg() powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR powerpc/iommu: return error code from .map_sg() ops ...
2021-08-20Merge branches 'apple/dart', 'arm/smmu', 'iommu/fixes', 'x86/amd', ↵Joerg Roedel1-52/+146
'x86/vt-d' and 'core' into next
2021-08-18iommu: Allow enabling non-strict mode dynamicallyRobin Murphy1-4/+13
Allocating and enabling a flush queue is in fact something we can reasonably do while a DMA domain is active, without having to rebuild it from scratch. Thus we can allow a strict -> non-strict transition from sysfs without requiring to unbind the device's driver, which is of particular interest to users who want to make selective relaxations to critical devices like the one serving their root filesystem. Disabling and draining a queue also seems technically possible to achieve without rebuilding the whole domain, but would certainly be more involved. Furthermore there's not such a clear use-case for tightening up security *after* the device may already have done whatever it is that you don't trust it not to do, so we only consider the relaxation case. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/d652966348c78457c38bf18daf369272a4ebc2c9.1628682049.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-18iommu: Merge strictness and domain type configsRobin Murphy1-1/+1
To parallel the sysfs behaviour, merge the new build-time option for DMA domain strictness into the default domain type choice. Suggested-by: Joerg Roedel <joro@8bytes.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/d04af35b9c0f2a1d39605d7a9b451f5e1f0c7736.1628682049.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-18iommu: Only log strictness for DMA domainsRobin Murphy1-4/+5
When passthrough is enabled, the default strictness policy becomes irrelevant, since any subsequent runtime override to a DMA domain type now embodies an explicit choice of strictness as well. Save on noise by only logging the default policy when it is meaningfully in effect. Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/9d2bcba880c6d517d0751ed8bd4960853030b4d7.1628682049.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-18iommu: Expose DMA domain strictness via sysfsRobin Murphy1-0/+2
The sysfs interface for default domain types exists primarily so users can choose the performance/security tradeoff relevant to their own workload. As such, the choice between the policies for DMA domains fits perfectly as an additional point on that scale - downgrading a particular device from a strict default to non-strict may be enough to let it reach the desired level of performance, while still retaining more peace of mind than with a wide-open identity domain. Now that we've abstracted non-strict mode as a distinct type of DMA domain, allow it to be chosen through the user interface as well. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/0e08da5ed4069fd3473cfbadda758ca983becdbf.1628682049.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-18iommu: Express DMA strictness via the domain typeRobin Murphy1-9/+5
Eliminate the iommu_get_dma_strict() indirection and pipe the information through the domain type from the beginning. Besides the flow simplification this also has several nice side-effects: - Automatically implies strict mode for untrusted devices by virtue of their IOMMU_DOMAIN_DMA override. - Ensures that we only end up using flush queues for drivers which are aware of them and can actually benefit. - Allows us to handle flush queue init failure by falling back to strict mode instead of leaving it to possibly blow up later. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/47083d69155577f1367877b1594921948c366eb3.1628682049.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-18iommu: Introduce explicit type for non-strict DMA domainsRobin Murphy1-2/+6
Promote the difference between strict and non-strict DMA domains from an internal detail to a distinct domain feature and type, to pave the road for exposing it through the sysfs default domain interface. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/08cd2afaf6b63c58ad49acec3517c9b32c2bb946.1628682049.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-18iommu: Pull IOVA cookie management into the coreRobin Murphy1-0/+7
Now that everyone has converged on iommu-dma for IOMMU_DOMAIN_DMA support, we can abandon the notion of drivers being responsible for the cookie type, and consolidate all the management into the core code. CC: Yong Wu <yong.wu@mediatek.com> CC: Chunyan Zhang <chunyan.zhang@unisoc.com> CC: Maxime Ripard <mripard@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/46a2c0e7419c7d1d931762dc7b6a69fa082d199a.1628682048.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-10iommu: Fix race condition during default domain allocationAshish Mhetre1-0/+2
When two devices with same SID are getting probed concurrently through iommu_probe_device(), the iommu_domain sometimes is getting allocated more than once as call to iommu_alloc_default_domain() is not protected for concurrency. Furthermore, it leads to each device holding a different iommu_domain pointer, separate IOVA space and only one of the devices' domain is used for translations from IOMMU. This causes accesses from other device to fault or see incorrect translations. Fix this by protecting iommu_alloc_default_domain() call with group->mutex and let all devices with same SID share same iommu_domain. Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Link: https://lore.kernel.org/r/1628570641-9127-2-git-send-email-amhetre@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2021-08-09iommu: return full error code from iommu_map_sg[_atomic]()Logan Gunthorpe1-8/+7
Convert to ssize_t return code so the return code from __iommu_map() can be returned all the way down through dma_iommu_map_sg(). Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-02iommu: Check if group is NULL before remove deviceFrank Wunderlich1-0/+3
If probe_device is failing, iommu_group is not initialized because iommu_group_add_device is not reached, so freeing it will result in NULL pointer access. iommu_bus_init ->bus_iommu_probe ->probe_iommu_group in for each:/* return -22 in fail case */ ->iommu_probe_device ->__iommu_probe_device /* return -22 here.*/ -> ops->probe_device /* return -22 here.*/ -> iommu_group_get_for_dev -> ops->device_group -> iommu_group_add_device //good case ->remove_iommu_group //in fail case, it will remove group ->iommu_release_device ->iommu_group_remove_device // here we don't have group In my case ops->probe_device (mtk_iommu_probe_device from mtk_iommu_v1.c) is due to failing fwspec->ops mismatch. Fixes: d72e31c93746 ("iommu: IOMMU Groups") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20210731074737.4573-1-linux@fw-web.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Streamline iommu_iova_to_phys()Robin Murphy1-1/+4
If people are going to insist on calling iommu_iova_to_phys() pointlessly and expecting it to work, we can at least do ourselves a favour by handling those cases in the core code, rather than repeatedly across an inconsistent handful of drivers. Since all the existing drivers implement the internal callback, and any future ones are likely to want to work with iommu-dma which relies on iova_to_phys a fair bit, we may as well remove that currently-redundant check as well and consider it mandatory. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/f564f3f6ff731b898ff7a898919bf871c2c7745a.1626354264.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Remove mode argument from iommu_set_dma_strict()John Garry1-3/+2
We only ever now set strict mode enabled in iommu_set_dma_strict(), so just remove the argument. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1626088340-5838-7-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Enhance IOMMU default DMA mode build optionsZhen Lei1-1/+1
First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the opportunity to set {lazy|strict} mode as default at build time. Then put the two config options in an choice, as they are mutually exclusive. [jpg: Make choice between strict and lazy only (and not passthrough)] Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1626088340-5838-4-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Print strict or lazy mode at init timeJohn Garry1-0/+5
As well as the default domain type, it's useful to know whether strict or lazy for DMA domains, so add this info in a separate print. The (stict/lazy) mode may be also set via iommu.strict earlyparm, but this will be processed prior to iommu_subsys_init(), so that print will be accurate for drivers which don't set the mode via custom means. For the drivers which set the mode via custom means - AMD and Intel drivers - they maintain prints to inform a change in policy or that custom cmdline methods to change policy are deprecated. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1626088340-5838-3-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Add support for the map_pages() callbackIsaac J. Manjarres1-8/+35
Since iommu_pgsize can calculate how many pages of the same size can be mapped/unmapped before the next largest page size boundary, add support for invoking an IOMMU driver's map_pages() callback, if it provides one. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-9-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Hook up '->unmap_pages' driver callbackWill Deacon1-9/+50
Extend iommu_pgsize() to populate an optional 'count' parameter so that we can direct unmapping operation to the ->unmap_pages callback if it has been provided by the driver. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-8-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Split 'addr_merge' argument to iommu_pgsize() into separate partsWill Deacon1-4/+6
The 'addr_merge' parameter to iommu_pgsize() is a fabricated address intended to describe the alignment requirements to consider when choosing an appropriate page size. On the iommu_map() path, this address is the logical OR of the virtual and physical addresses. Subsequent improvements to iommu_pgsize() will need to check the alignment of the virtual and physical components of 'addr_merge' independently, so pass them in as separate parameters and reconstruct 'addr_merge' locally. No functional change. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-7-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-26iommu: Use bitmap to calculate page size in iommu_pgsize()Will Deacon1-19/+12
Avoid the potential for shifting values by amounts greater than the width of their type by using a bitmap to compute page size in iommu_pgsize(). Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-6-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09iommu: Delete a duplicate check in iommu_change_dev_def_domain()Zhen Lei1-3/+0
Function iommu_group_store_type() is the only caller of the static function iommu_change_dev_def_domain() and has performed "if (WARN_ON(!group))" detection before calling it. So the one here is redundant. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210513075815.6382-1-thunder.leizhen@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16iommu: Streamline registration interfaceRobin Murphy1-1/+18
Rather than have separate opaque setter functions that are easy to overlook and lead to repetitive boilerplate in drivers, let's pass the relevant initialisation parameters directly to iommu_device_register(). Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu: remove iommu_domain_{get,set}_attrChristoph Hellwig1-26/+0
Remove the now unused iommu attr infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210401155256.298656-21-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu: remove DOMAIN_ATTR_IO_PGTABLE_CFGChristoph Hellwig1-0/+11
Use an explicit set_pgtable_quirks method instead that just passes the actual quirk bitmask instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-20-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu: remove DOMAIN_ATTR_DMA_USE_FLUSH_QUEUERobin Murphy1-9/+21
Instead make the global iommu_dma_strict paramete in iommu.c canonical by exporting helpers to get and set it and use those directly in the drivers. This make sure that the iommu.strict parameter also works for the AMD and Intel IOMMU drivers on x86. As those default to lazy flushing a new IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to represent the default if not overriden by an explicit parameter. [ported on top of the other iommu_attr changes and added a few small missing bits] Signed-off-by: Robin Murphy <robin.murphy@arm.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu: remove iommu_set_cmd_line_dma_api and iommu_cmd_line_dma_apiChristoph Hellwig1-18/+5
Don't obsfucate the trivial bit flag check. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210401155256.298656-18-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu: remove DOMAIN_ATTR_NESTINGChristoph Hellwig1-0/+10
Use an explicit enable_nesting method instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-17-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu: remove DOMAIN_ATTR_GEOMETRYChristoph Hellwig1-17/+3
The geometry information can be trivially queried from the iommu_domain struture. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-16-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu: remove DOMAIN_ATTR_PAGINGChristoph Hellwig1-5/+0
DOMAIN_ATTR_PAGING is never used. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-15-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: remove ->domain_window_enableChristoph Hellwig1-11/+0
The only thing that fsl_pamu_window_enable does for the current caller is to fill in the prot value in the only dma_window structure, and to propagate a few values from the iommu_domain_geometry struture into the dma_window. Remove the dma_window entirely, hardcode the prot value and otherwise use the iommu_domain_geometry structure instead. Remove the now unused ->domain_window_enable iommu method. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-03-18iommu: Check dev->iommu in iommu_dev_xxx functionsShameer Kolothum1-9/+15
The device iommu probe/attach might have failed leaving dev->iommu to NULL and device drivers may still invoke these functions resulting in a crash in iommu vendor driver code. Hence make sure we check that. Fixes: a3a195929d40 ("iommu: Add APIs for multiple domains per device") Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210303173611.520-1-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-12Merge branches 'arm/renesas', 'arm/smmu', 'x86/amd', 'x86/vt-d' and 'core' ↵Joerg Roedel1-26/+28
into next
2021-02-02iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleepingDouglas Anderson1-1/+1
Sleeping while atomic = bad. Let's fix an obvious typo to try to avoid it. The warning that was seen (on a downstream kernel with the problematic patch backported): BUG: sleeping function called from invalid context at mm/page_alloc.c:4726 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: ksoftirqd/0 CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.4.93-12508-gc10c93e28e39 #1 Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c dump_stack+0xa0/0xfc ___might_sleep+0x11c/0x12c __might_sleep+0x50/0x84 __alloc_pages_nodemask+0xf8/0x2bc __arm_lpae_alloc_pages+0x48/0x1b4 __arm_lpae_map+0x124/0x274 __arm_lpae_map+0x1cc/0x274 arm_lpae_map+0x140/0x170 arm_smmu_map+0x78/0xbc __iommu_map+0xd4/0x210 _iommu_map+0x4c/0x84 iommu_map_atomic+0x44/0x58 __iommu_dma_map+0x8c/0xc4 iommu_dma_map_page+0xac/0xf0 Fixes: d8c1df02ac7f ("iommu: Move iotlb_sync_map out from __iommu_map") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210201170611.1.I64a7b62579287d668d7c89e105dcedf45d641063@changeid Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-28iommu: use the __iommu_attach_device() directly for deferred attachLianbo Jiang1-0/+10
Currently, because domain attach allows to be deferred from iommu driver to device driver, and when iommu initializes, the devices on the bus will be scanned and the default groups will be allocated. Due to the above changes, some devices could be added to the same group as below: [ 3.859417] pci 0000:01:00.0: Adding to iommu group 16 [ 3.864572] pci 0000:01:00.1: Adding to iommu group 16 [ 3.869738] pci 0000:02:00.0: Adding to iommu group 17 [ 3.874892] pci 0000:02:00.1: Adding to iommu group 17 But when attaching these devices, it doesn't allow that a group has more than one device, otherwise it will return an error. This conflicts with the deferred attaching. Unfortunately, it has two devices in the same group for my side, for example: [ 9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0 [ 9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1 ... [ 10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0 [ 10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1 Finally, which caused the failure of tg3 driver when tg3 driver calls the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma(). [ 9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting [ 9.754085] tg3: probe of 0000:01:00.0 failed with error -12 [ 9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting [ 10.043053] tg3: probe of 0000:01:00.1 failed with error -12 [ 10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting [ 10.334070] tg3: probe of 0000:02:00.0 failed with error -12 [ 10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting [ 10.622629] tg3: probe of 0000:02:00.1 failed with error -12 In addition, the similar situations also occur in other drivers such as the bnxt_en driver. That can be reproduced easily in kdump kernel when SME is active. Let's move the handling currently in iommu_dma_deferred_attach() into the iommu core code so that it can call the __iommu_attach_device() directly instead of the iommu_attach_device(). The external interface iommu_attach_device() is not suitable for handling this situation. Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210126115337.20068-3-lijiang@redhat.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27iommu: Add iova and size as parameters in iotlb_sync_mapYong Wu1-2/+2
iotlb_sync_map allow IOMMU drivers tlb sync after completing the whole mapping. This patch adds iova and size as the parameters in it. then the IOMMU driver could flush tlb with the whole range once after iova mapping to improve performance. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-3-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-27iommu: Move iotlb_sync_map out from __iommu_mapYong Wu1-5/+18
In the end of __iommu_map, It alway call iotlb_sync_map. This patch moves iotlb_sync_map out from __iommu_map since it is unnecessary to call this for each sg segment especially iotlb_sync_map is flush tlb all currently. Add a little helper _iommu_map for this. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-2-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-27iommu: Delete iommu_dev_has_feature()John Garry1-11/+0
Function iommu_dev_has_feature() has never been referenced in the tree, and there does not appear to be anything coming soon to use it, so delete it. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1609940111-28563-7-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27iommu: Delete iommu_domain_window_disable()John Garry1-9/+0
Function iommu_domain_window_disable() is not referenced in the tree, so delete it. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1609940111-28563-6-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27iommu: Stop exporting iommu_map_sg_atomic()John Garry1-1/+0
Function iommu_map_sg_atomic() is only referenced in dma-iommu.c, which can only be built-in, so stop exporting. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1609940111-28563-5-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-12-08Merge branch 'for-next/iommu/fixes' into for-next/iommu/coreWill Deacon1-4/+6
Merge in IOMMU fixes for 5.10 in order to resolve conflicts against the queue for 5.11. * for-next/iommu/fixes: iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs iommu/vt-d: Don't read VCCAP register unless it exists x86/tboot: Don't disable swiotlb when iommu is forced on iommu: Check return of __iommu_attach_device() arm-smmu-qcom: Ensure the qcom_scm driver has finished probing iommu/amd: Enforce 4k mapping for certain IOMMU data structures MAINTAINERS: Temporarily add myself to the IOMMU entry iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not set iommu/vt-d: Avoid panic if iommu init fails in tboot system iommu/vt-d: Cure VF irqdomain hickup x86/platform/uv: Fix copied UV5 output archtype x86/platform/uv: Drop last traces of uv_flush_tlb_others
2020-12-08Merge branch 'for-next/iommu/misc' into for-next/iommu/coreWill Deacon1-8/+20
Miscellaneous IOMMU changes for 5.11. Largely cosmetic, apart from a change to the way in which identity-mapped domains are configured so that the requests are now batched and can potentially use larger pages for the mapping. * for-next/iommu/misc: iommu/io-pgtable-arm: Remove unused 'level' parameter from iopte_type() macro iommu: Defer the early return in arm_(v7s/lpae)_map iommu: Improve the performance for direct_mapping iommu: return error code when it can't get group iommu: Modify the description of iommu_sva_unbind_device
2020-12-07iommu: Improve the performance for direct_mappingYong Wu1-5/+17
Currently direct_mapping always use the smallest pgsize which is SZ_4K normally to mapping. This is unnecessary. we could gather the size, and call iommu_map then, iommu_map could decide how to map better with the just right pgsize. >From the original comment, we should take care overlap, otherwise, iommu_map may return -EEXIST. In this overlap case, we should map the previous region before overlap firstly. then map the left part. Each a iommu device will call this direct_mapping when its iommu initialize, This patch is effective to improve the boot/initialization time especially while it only needs level 1 mapping. Signed-off-by: Anan Sun <anan.sun@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20201207093553.8635-1-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-26iommu: return error code when it can't get groupYang Yingliang1-1/+3
Although iommu_group_get() in iommu_probe_device() will always succeed thanks to __iommu_probe_device() creating the group if it's not present, it's still worth initialising 'ret' to -ENODEV in case this path is reachable in the future. For now, this patch results in no functional change. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20201126133825.3643852-1-yangyingliang@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25iommu: Take lock before reading iommu group default domain typeSai Praneeth Prakhya1-0/+2
"/sys/kernel/iommu_groups/<grp_id>/type" file could be read to find out the default domain type of an iommu group. The default domain of an iommu group doesn't change after booting and hence could be read directly. But, after addding support to dynamically change iommu group default domain, the above assumption no longer stays valid. iommu group default domain type could be changed at any time by writing to "/sys/kernel/iommu_groups/<grp_id>/type". So, take group mutex before reading iommu group default domain type so that the user wouldn't see stale values or iommu_group_show_type() doesn't try to derefernce stale pointers. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20201124130604.2912899-4-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25iommu: Add support to change default domain of an iommu groupSai Praneeth Prakhya1-1/+229
Presently, the default domain of an iommu group is allocated during boot time and it cannot be changed later. So, the device would typically be either in identity (also known as pass_through) mode or the device would be in DMA mode as long as the machine is up and running. There is no way to change the default domain type dynamically i.e. after booting, a device cannot switch between identity mode and DMA mode. But, assume a use case wherein the user trusts the device and believes that the OS is secure enough and hence wants *only* this device to bypass IOMMU (so that it could be high performing) whereas all the other devices to go through IOMMU (so that the system is protected). Presently, this use case is not supported. It will be helpful if there is some way to change the default domain of an iommu group dynamically. Hence, add such support. A privileged user could request the kernel to change the default domain type of a iommu group by writing to "/sys/kernel/iommu_groups/<grp_id>/type" file. Presently, only three values are supported 1. identity: all the DMA transactions from the device in this group are *not* translated by the iommu 2. DMA: all the DMA transactions from the device in this group are translated by the iommu 3. auto: change to the type the device was booted with Note: 1. Default domain of an iommu group with two or more devices cannot be changed. 2. The device in the iommu group shouldn't be bound to any driver. 3. The device shouldn't be assigned to user for direct access. 4. The change request will fail if any device in the group has a mandatory default domain type and the requested one conflicts with that. Please see "Documentation/ABI/testing/sysfs-kernel-iommu_groups" for more information. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20201124130604.2912899-3-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25iommu: Move def_domain type check for untrusted device into coreLu Baolu1-9/+7
So that the vendor iommu drivers are no more required to provide the def_domain_type callback to always isolate the untrusted devices. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/linux-iommu/243ce89c33fe4b9da4c56ba35acebf81@huawei.com/ Link: https://lore.kernel.org/r/20201124130604.2912899-2-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 01:26:48 +0000