summaryrefslogtreecommitdiffstats
path: root/drivers/interconnect
AgeCommit message (Collapse)AuthorFilesLines
2021-06-22Merge tag 'icc-5.14-rc1' of ↵Greg Kroah-Hartman4-0/+2103
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.14 Here are changes for the 5.14-rc1 merge window consisting of interconnect driver updates. Driver changes: - New driver for SC7280 platforms. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add SC7280 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SC7280 DT bindings
2021-05-11interconnect: qcom: Add SC7280 interconnect provider driverOdelu Kukatla4-0/+2103
Add driver for the Qualcomm interconnect buses found in SC7280 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Link: https://lore.kernel.org/r/1619517059-12109-3-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11interconnect: qcom: Add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11interconnect: qcom: bcm-voter: add a missing of_node_put()Subbaraman Narayanamurthy1-1/+2
Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak. Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-04-27Merge tag 'cfi-v5.13-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull CFI on arm64 support from Kees Cook: "This builds on last cycle's LTO work, and allows the arm64 kernels to be built with Clang's Control Flow Integrity feature. This feature has happily lived in Android kernels for almost 3 years[1], so I'm excited to have it ready for upstream. The wide diffstat is mainly due to the treewide fixing of mismatched list_sort prototypes. Other things in core kernel are to address various CFI corner cases. The largest code portion is the CFI runtime implementation itself (which will be shared by all architectures implementing support for CFI). The arm64 pieces are Acked by arm64 maintainers rather than coming through the arm64 tree since carrying this tree over there was going to be awkward. CFI support for x86 is still under development, but is pretty close. There are a handful of corner cases on x86 that need some improvements to Clang and objtool, but otherwise works well. Summary: - Clean up list_sort prototypes (Sami Tolvanen) - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)" * tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: allow CONFIG_CFI_CLANG to be selected KVM: arm64: Disable CFI for nVHE arm64: ftrace: use function_nocfi for ftrace_call arm64: add __nocfi to __apply_alternatives arm64: add __nocfi to functions that jump to a physical address arm64: use function_nocfi with __pa_symbol arm64: implement function_nocfi psci: use function_nocfi for cpu_resume lkdtm: use function_nocfi treewide: Change list_sort to use const pointers bpf: disable CFI in dispatcher functions kallsyms: strip ThinLTO hashes from static functions kthread: use WARN_ON_FUNCTION_MISMATCH workqueue: use WARN_ON_FUNCTION_MISMATCH module: ensure __cfi_check alignment mm: add generic function_nocfi macro cfi: add __cficanonical add support for Clang CFI
2021-04-15Merge tag 'icc-5.13-rc1' of ↵Greg Kroah-Hartman6-2/+1748
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.13 These are the interconnect changes for the 5.13-rc1 merge window with the highlights being drivers for two new platforms. Driver changes: - New driver for SM8350 platforms. - New driver for SDM660 platforms. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sm8350: Add missing link between nodes interconnect: qcom: sm8350: Use the correct ids interconnect: qcom: sdm660: Fix kerneldoc warning MAINTAINERS: icc: add interconnect tree interconnect: qcom: Add SM8350 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings interconnect: qcom: icc-rpm: record slave RPM id in error log interconnect: qcom: Add SDM660 interconnect provider driver dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC
2021-04-08treewide: Change list_sort to use const pointersSami Tolvanen1-1/+1
list_sort() internally casts the comparison function passed to it to a different type with constant struct list_head pointers, and uses this pointer to call the functions, which trips indirect call Control-Flow Integrity (CFI) checking. Instead of removing the consts, this change defines the list_cmp_func_t type and changes the comparison function types of all list_sort() callers to use const pointers, thus avoiding type mismatches. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
2021-04-02Merge branch 'icc-sm8350' into icc-nextGeorgi Djakov4-0/+812
This adds interconnect support for SM8350 SoC. * icc-sm8350 dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings interconnect: qcom: Add SM8350 interconnect provider driver interconnect: qcom: sm8350: Use the correct ids interconnect: qcom: sm8350: Add missing link between nodes Link: https://lore.kernel.org/r/20210318094617.951212-1-vkoul@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-04-02Merge branch 'icc-sdm660' into icc-nextGeorgi Djakov3-0/+934
This patch series adds the SDM660 interconnect provider driver in order to stop some timeouts and achieve some decent performance by avoiding to be NoC limited. It's also providing some power consumption improvement, but I have only measured that as less heat, which is quite important when working on thermally constrained devices like smartphones. Please note that this driver's yaml binding is referring to a MMCC clock, so this series does depend on the SDM660 MMCC driver that I have sent separately. The multimedia clock is required only for the Multimedia NoC (mnoc). This patch series has been tested against the following devices: - Sony Xperia XA2 Ultra (SDM630 Nile Discovery) - Sony Xperia 10 (SDM630 Ganges Kirin) - Sony Xperia 10 Plus (SDM636 Ganges Mermaid) * icc-sdm660 dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC interconnect: qcom: Add SDM660 interconnect provider driver interconnect: qcom: sdm660: Fix kerneldoc warning Link: https://lore.kernel.org/r/20201017133718.31327-1-kholk11@gmail.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-04-02interconnect: qcom: sm8350: Add missing link between nodesGeorgi Djakov1-1/+1
There is a link between the GEM NoC and C NoC nodes, which is currently missing from the topology. Let's add it to allow consumers request paths that use this link. Reported-by: Alex Elder <elder@linaro.org> Tested-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210401094435.28937-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-04-02interconnect: qcom: sm8350: Use the correct idsGeorgi Djakov1-40/+40
For creating an array with the members for each NoC, we should be using a local indexes, as otherwise unnecessary large arrays would be created. Using an incorrect indexes will also result error for the consumers when they try to find a valid path between the endpoints. Let's fix this and use the correct ids. Reported-by: Alex Elder <elder@linaro.org> Acked-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210401094334.28871-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-04-02interconnect: qcom: sdm660: Fix kerneldoc warningGeorgi Djakov1-0/+1
Fix the following warning: sdm660.c:191:warning: Function parameter or member 'regmap' not described in 'qcom_icc_provider' Link: https://lore.kernel.org/r/20210401094714.29075-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-03-27interconnect: qcom: Add SM8350 interconnect provider driverVinod Koul4-0/+812
Add driver for the Qualcomm interconnect buses found in SM8350 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Generated from downstream interconnect driver written by David Dai Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210318094617.951212-3-vkoul@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-03-18interconnect: Fix kerneldoc warningGeorgi Djakov1-1/+1
Fix the following warning: drivers/interconnect/bulk.c:63: warning: expecting prototype for icc_bulk_set(). Prototype was for icc_bulk_set_bw() instead Link: https://lore.kernel.org/r/20210318163415.30941-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-03-08interconnect: qcom: icc-rpm: record slave RPM id in error logBenjamin Li1-2/+2
Add slave RPM ID to assist with identifying incorrect RPM config. Signed-off-by: Benjamin Li <benl@squareup.com> Reviewed-by: Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20210205015205.22947-2-benl@squareup.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-03-08interconnect: qcom: Add SDM660 interconnect provider driverAngeloGioacchino Del Regno3-0/+933
Introduce a driver for the Qualcomm interconnect busses found in the SDM630/SDM636/SDM660 SoCs. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. On a note, these chips are managing the "bus QoS" in a "hybrid" fashion: some of the paths in the topology are managed through (and by, of course) the RPM uC, while some others are "AP Owned", meaning that the AP shall do direct writes to the appropriate QoS registers for the specific paths and ports, instead of sending an indication to the RPM and leaving the job to that one. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20201017133718.31327-3-kholk11@gmail.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-03-08interconnect: core: fix error return code of icc_link_destroy()Jia-Ju Bai1-0/+2
When krealloc() fails and new is NULL, no error return code of icc_link_destroy() is assigned. To fix this bug, ret is assigned with -ENOMEM hen new is NULL. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20210306132857.17020-1-baijiaju1990@gmail.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-03-08interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodesBenjamin Li1-8/+8
Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent. See commit c497f9322af9 ("interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes") where this was done for msm8916. Signed-off-by: Benjamin Li <benl@squareup.com> Reviewed-by: Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20210205015205.22947-3-benl@squareup.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-02-01Merge branch 'icc-sdx55' into icc-nextGeorgi Djakov4-0/+437
Add interconnect driver support for SDX55 platform for scaling the bandwidth requirements over RPMh. * icc-sdx55 dt-bindings: interconnect: Add Qualcomm SDX55 DT bindings interconnect: qcom: Add SDX55 interconnect provider driver Link: https://lore.kernel.org/r/20210121053254.8355-1-manivannan.sadhasivam@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-01-27interconnect: qcom: Add SDX55 interconnect provider driverManivannan Sadhasivam4-0/+437
Add driver for the Qualcomm interconnect buses found in SDX55 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SM8250 driver and generated from downstream dts. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121053254.8355-3-manivannan.sadhasivam@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-01-11Merge branch 'icc-msm8939' into icc-nextGeorgi Djakov7-466/+649
Split shared RPM based interconnect operation code and add support for MSM8939 interconnect. * icc-msm8939 interconnect: qcom: Consolidate interconnect RPM support interconnect: qcom: qcs404: use shared code dt-bindings: interconnect: single yaml file for RPM interconnect drivers dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings interconnect: qcom: Add MSM8939 interconnect provider driver Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-01-05interconnect: qcom: Add MSM8939 interconnect provider driverJun Nie3-0/+366
Add driver for the Qualcomm interconnect buses found in MSM8939 based platforms. The topology consists of four NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20201204075345.5161-6-jun.nie@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-01-05interconnect: qcom: qcs404: use shared codeJun Nie1-234/+8
Use shared code for aggregate functionalities and probe function to remove duplicated code. Signed-off-by: Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20201204075345.5161-3-jun.nie@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-01-05interconnect: qcom: Consolidate interconnect RPM supportJun Nie4-232/+275
Add RPM based interconnect driver implements the set and aggregate functionalities that translates bandwidth requests into RPM messages. These modules provide a common set of functionalities for all Qualcomm RPM based interconnect providers and should help reduce code duplication when adding new providers. Signed-off-by: Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20201204075345.5161-2-jun.nie@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28interconnect: imx8mq: Use icc_sync_stateMartin Kepplinger1-0/+2
Add the icc_sync_state callback to notify the framework when consumers are probed and the bandwidth doesn't have to be kept at maximum anymore. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Suggested-by: Georgi Djakov <georgi.djakov@linaro.org> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/20201210100906.18205-6-martin.kepplinger@puri.sm Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28interconnect: imx: Remove a useless testChristophe JAILLET1-1/+1
'dn' can't be NULL here, it is tested just the line above. Remove this useless test. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201206121322.29434-1-christophe.jaillet@wanadoo.fr Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28interconnect: imx: Add a missing of_node_put after of_device_is_availableChristophe JAILLET1-0/+1
Add an 'of_node_put()' call when a tested device node is not available. Fixes: f0d8048525d7 ("interconnect: Add imx core driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201206121304.29381-1-christophe.jaillet@wanadoo.fr Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28interconnect: qcom: fix rpmh link failuresArnd Bergmann1-8/+15
When CONFIG_COMPILE_TEST is set, it is possible to build some of the interconnect drivers into the kernel while their dependencies are loadable modules, which is bad: arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit': (.text+0x1f8): undefined reference to `rpmh_invalidate' arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init': (.text+0x2ac): undefined reference to `cmd_db_read_addr' arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data' The exact dependencies are a bit complicated, so split them out into a hidden Kconfig symbol that all drivers can in turn depend on to get it right. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-16Merge tag 'arm-soc-dt-5.11' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...
2020-12-08Merge tag 'qcom-arm64-for-5.11' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. * tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits) arm64: dts: qcom: c630: Define eDP bridge and panel arm64: dts: qcom: c630: Fix pinctrl pins properties arm64: dts: qcom: c630: Polish i2c-hid devices arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver arm64: dts: sdm845: Add interconnect properties for QUP interconnect: qcom: sdm845: Add the missing nodes for QUP dt-bindings: interconnect: sdm845: Add IDs for the QUP ports arm64: dts: qcom: c630: Expose LID events arm64: dts: qcom: c630: Re-enable apps_smmu dts: qcom: sdm845: Add dt entries to support crypto engine. arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: limit IPA iommu streams arm64: dts: qcom: sm8150: Add Coresight support arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor ... Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-04Merge tag 'icc-5.11-rc1' of ↵Greg Kroah-Hartman6-11/+222
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.11 Here are the interconnect changes for the 5.10-rc1 merge window consisting of new driver and a cleanup. Driver changes: - New driver for Samsung Exynos SoCs - Misc cleanups Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: MAINTAINERS: Add entry for Samsung interconnect drivers interconnect: Add generic interconnect driver for Exynos SoCs interconnect: qcom: Simplify the vcd compare function
2020-11-30interconnect: qcom: sdm845: Add the missing nodes for QUPGeorgi Djakov1-0/+3
The QUP nodes are currently defined just as entries in the topology, but they are not referenced by any of the NoCs. Let's fix this and "attach" them to their NoCs, so that the QUP drivers are able to use them as path endpoints and scale their bandwidth. This is based on the information from the downstream msm-4.9 kernel. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201105135211.7160-2-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30interconnect: Add generic interconnect driver for Exynos SoCsSylwester Nawrocki5-0/+218
This patch adds a generic interconnect driver for Exynos SoCs in order to provide interconnect functionality for each "samsung,exynos-bus" compatible device. The SoC topology is a graph (or more specifically, a tree) and its edges are described by specifying in the 'interconnects' property the interconnect consumer path for each interconnect provider DT node. Each bus is now an interconnect provider and an interconnect node as well (cf. Documentation/interconnect/interconnect.rst), i.e. every bus registers itself as a node. Node IDs are not hard coded but rather assigned dynamically at runtime. This approach allows for using this driver with various Exynos SoCs. Frequencies requested via the interconnect API for a given node are propagated to devfreq using dev_pm_qos_update_request(). Please note that it is not an error when CONFIG_INTERCONNECT is 'n', in which case all interconnect API functions are no-op. The samsung,data-clk-ratio DT property is used to specify the ratio of the interconect bandwidth to the minimum data clock frequency for each bus. Due to unspecified relative probing order, -EPROBE_DEFER may be propagated to ensure that the parent is probed before its children. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201112140931.31139-3-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-30interconnect: qcom: Simplify the vcd compare functionGeorgi Djakov1-11/+4
Let's simplify the cmp_vcd() function and replace the conditionals with just a single statement, which also improves readability. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20201013171923.7351-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: fix memory trashing in of_count_icc_providers()Marek Szyprowski1-1/+0
of_count_icc_providers() function uses for_each_available_child_of_node() helper to recursively check all the available nodes. This helper already properly handles child nodes' reference count, so there is no need to do it explicitly. Remove the excessive call to of_node_put(). This fixes memory trashing when CONFIG_OF_DYNAMIC is enabled (for example arm/multi_v7_defconfig). Fixes: b1d681d8d324 ("interconnect: Add sync state support") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201119103746.32564-1-m.szyprowski@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: qcom: qcs404: Remove GPU and display RPM IDsGeorgi Djakov1-2/+2
The following errors are noticed during boot on a QCS404 board: [ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6 [ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6 These errors show when we try to configure the GPU and display nodes. Since these particular nodes aren't supported on RPM and are purely local, we should just change their mas_rpm_id to -1 to avoid any requests being sent for these master IDs. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodesGeorgi Djakov1-6/+6
Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20201112105140.10092-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-18interconnect: qcom: msm8974: Don't boost the NoC rate during bootGeorgi Djakov1-0/+9
It has been reported that on Fairphone 2 (msm8974-based), increasing the clock rate for some of the NoCs during boot may lead to hangs. Let's restore the original behavior and not touch the clock rate of any of the NoCs to fix the regression. Reported-by: Luca Weiss <luca@z3ntu.xyz> Tested-by: Luca Weiss <luca@z3ntu.xyz> Fixes: b1d681d8d324 ("interconnect: Add sync state support") Link: https://lore.kernel.org/r/20201109124512.10776-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-18interconnect: qcom: msm8974: Prevent integer overflow in rateGeorgi Djakov1-0/+3
When sync_state support got introduced recently, by default we try to set the NoCs to run initially at maximum rate. But as these values are aggregated, we may end with a really big clock rate value, which is then converted from "u64" to "long" during the clock rate rounding. But on 32bit platforms this may result an overflow. Fix it by making sure that the rate is within range. Reported-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20201106144847.7726-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-27interconnect: qcom: use icc_sync state for sm8[12]50Dmitry Baryshkov2-6/+8
In addition to the rest of Qcom interconnect drivers use icc_sync_state for SM8150/SM8250 interconnect drivers to notify the interconnect framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Also move the BCM initialization before creating the nodes to set the max bandwidth in hardware for the initialization/probing stage. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-22interconnect: qcom: Ensure that the floor bandwidth value is enforcedGeorgi Djakov1-0/+7
Take into account the initial bandwidth from the framework and update the internal sum and max values before committing if needed. This will ensure that the floor bandwidth values are enforced until the providers get into sync state. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Tested-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/20201021155938.9223-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sc7180: Init BCMs before creating the nodesGeorgi Djakov1-3/+3
Currently if we use sync_state, by default the bandwidth is maxed out, but in order to set this in hardware, the BCMs (Bus Clock Managers) need to be initialized first. Move the BCM initialization before creating the nodes to fix this. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-3-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sdm845: Init BCMs before creating the nodesGeorgi Djakov1-3/+3
Currently if we use sync_state, by default the bandwidth is maxed out, but in order to set this in hardware, the BCMs (Bus Clock Managers) need to be initialized first. Move the BCM initialization before creating the nodes to fix this. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: Aggregate before setting initial bandwidthGeorgi Djakov1-0/+3
When setting the initial bandwidth, make sure to call the aggregate() function (if such is implemented for the current provider), to handle cases when data needs to be aggregated first. Fixes: b1d681d8d324 ("interconnect: Add sync state support") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sdm845: Enable keepalive for the MM1 BCMGeorgi Djakov1-1/+1
After enabling interconnect scaling for display on the db845c board, in certain configurations the board hangs, while the following errors are observed on the console: Error sending AMC RPMH requests (-110) qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 ... In this specific case, the above is related to one of the sequencers being stuck, while client drivers are returning from probe and trying to disable the currently unused clock and interconnect resources. Generally we want to keep the multimedia NoC enabled like the rest of the NoCs, so let's set the keepalive flag on it too. Fixes: aae57773fbe0 ("interconnect: qcom: sdm845: Split qnodes into their respective NoCs") Reported-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Tested-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20201012194034.26944-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-21interconnect: imx: simplify the return expression of imx_icc_unregisterLiu Shixin1-6/+1
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200921082437.2591461-1-liushixin2@huawei.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: imx: Simplify with dev_err_probe()Krzysztof Kozlowski1-4/+2
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902172433.1138-2-krzk@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: core: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+2
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902172433.1138-1-krzk@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18Merge branch 'icc-syncstate' into icc-nextGeorgi Djakov4-0/+70
* icc-syncstate: interconnect: Add get_bw() callback interconnect: Add sync state support interconnect: qcom: Use icc_sync_state Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: qcom: Use icc_sync_stateGeorgi Djakov3-0/+3
Lowering the bandwidth on the bus might have negative consequences if it's done before all consumers had a chance to cast their vote. Now by default the framework sets the bandwidth to maximum during boot. We need to use the icc_sync_state callback to notify the framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Link: https://lore.kernel.org/r/20200825170152.6434-4-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 10:38:03 +0000