summaryrefslogtreecommitdiffstats
path: root/drivers/interconnect
AgeCommit message (Collapse)AuthorFilesLines
2022-03-01Merge branch 'icc-msm8939' into icc-nextGeorgi Djakov1-9/+1
Booting msm8939 on tip-of-tree I encountered the following error. [ 1.212340] qnoc-msm8939 580000.interconnect_mm: can't request region for resource [mem 0x00580000-0x0059407f] [ 1.212391] qnoc-msm8939 580000.interconnect_mm: Cannot ioremap interconnect bus resource [ 1.221524] qnoc-msm8939: probe of 580000.interconnect_mm failed with error -16 Initially I thought this was a bug with the interconnect driver but, examining it a bit more I realized the DTS I was working with based on downstream, declares snoc and snoc_mm as existing at the same address range. When we were developing the DTS for 8939 we weren't using the common rpm interconnect driver so we never saw the ioremap collision. Taking a hard look at the qcom documentation as well as the downstream code we see that yes downstream declares snoc and snoc_mm separately but, also at the same overlapping address. The qcom documentation for performance points for msm8936/msm8939 snoc, deliniates snoc_mm as simply two new performance-points i.e. a faster GPLL0 vote associated with new multi-media devices attached to the snoc. In other words the snoc had two new RPM vote indices added to it, to represent the higher performance clocks, should one of the multi-media IP blocks call for it. We can fix the ioremap collision and still represent the two higher performance point clock votes by coalsecing snoc and snoc_mm into snoc. The DTS clock references will take care of the appropriate votes. V2: Made snoc-mm into a child of snoc - Dmitry Removes redundant msm8939_snoc_mm_regmap_config - bod Link: https://lore.kernel.org/r/20220129032735.2410936-1-bryan.odonoghue@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-02-10interconnect: qcom: msm8939: Remove snoc_mm specific regmapBryan O'Donoghue1-9/+1
Booting tip-of-tree on msm8939 we find the following error caused by our modelling of snoc and snoc_mm as peer devices with the same address space. [ 1.212340] qnoc-msm8939 580000.interconnect_mm: can't request region for resource [mem 0x00580000-0x0059407f] [ 1.212391] qnoc-msm8939 580000.interconnect_mm: Cannot ioremap interconnect bus resource [ 1.221524] qnoc-msm8939: probe of 580000.interconnect_mm failed with error -16 Declaring snoc_mm as a child device of snoc mitigates the fault and is consistent with a similar extant implementation in qcm2290. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20220129032735.2410936-3-bryan.odonoghue@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-01-23interconnect: imx: Add imx_icc_get_bw function to set initial avg and peakAbel Vesa1-0/+9
Set the initial avg and peak to 0 in order to avoid setting them to INT_MAX by the interconnect core. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220106170501.3513423-1-abel.vesa@nxp.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-15Merge branch 'icc-qcm2290' into icc-nextGeorgi Djakov9-12/+1453
Add support for QCM2290 including a few prep changes. * icc-qcm2290 interconnect: icc-rpm: Define ICC device type interconnect: icc-rpm: Add QNOC type QoS support interconnect: icc-rpm: Support child NoC device probe dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support interconnect: qcom: Add QCM2290 driver support Link: https://lore.kernel.org/r/20211215002324.1727-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-15interconnect: qcom: Add QCM2290 driver supportShawn Guo3-0/+1374
It adds interconnect driver support for QCM2290 platform. The topology consists of 3 NoCs: BIMC, Config NoC (CNOC) and System NoC (SNOC). SNOC is a QCOM_ICC_QNOC type device, as well as its 3 virtual child devices, QUP, MMNRT and MMRT. QUP is owned by RPM and thus has no .regmap_cfg, while the other 2 share the same .regmap_cfg with SNOC (parent). Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20211215002324.1727-6-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-15interconnect: icc-rpm: Support child NoC device probeShawn Guo1-1/+11
As shown in downstream DT[1], the System NoC of QCM2290 is modelled using 4 fab/noc devices: sys_noc + qup_virt + mmnrt_virt + mmrt_virt. Among those 3 virtual devices, qup is owned by RPM and has no regmap resource, while mmnrt and mmrt are owned by AP and share the same regmap as sys_noc. So it's logical to represent these virtual devices as child nodes of sys_noc in DT, so that such configuration can be supported with a couple of changes on qnoc_probe(): - If there are child nodes, populate them. - If the device descriptor has .regmap_cfg but there is no IOMEM resource for the device, use parent's regmap. [1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/tags/android-11.0.0_r0.56/qcom/scuba-bus.dtsi Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20211215002324.1727-4-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-15interconnect: icc-rpm: Add QNOC type QoS supportShawn Guo2-3/+38
It adds QoS support for QNOC type device which can be found on QCM2290 platform. The downstream driver[1] includes support for priority, limiter, regulator and forwarding setup. As QCM2290 support only requires priority and forwarding configuration, limiter and regulator support are omitted for this initial submission. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/soc/qcom/msm_bus/msm_bus_qnoc_adhoc.c?h=kernel.lnx.4.19.r22-rel Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20211215002324.1727-3-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-15interconnect: icc-rpm: Define ICC device typeShawn Guo6-9/+31
The driver currently uses .is_bimc_node to distinguish device type BIMC from NOC. Define type for bus/noc devices like what downstream[1] does to make support for more types easier. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/soc/qcom/msm_bus/msm_bus_core.h?h=kernel.lnx.4.19.r22-rel#n46 Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20211215002324.1727-2-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-14Merge branch 'icc-sm8450' into icc-nextGeorgi Djakov4-0/+2167
This add device tree binding and driver for interconnect providers found in SM8450 SoC. * icc-sm8450 dt-bindings: interconnect: Add Qualcomm SM8450 DT bindings interconnect: qcom: Add SM8450 interconnect provider driver Link: https://lore.kernel.org/r/20211209084842.189627-1-vkoul@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-14interconnect: qcom: Add SM8450 interconnect provider driverVinod Koul4-0/+2167
Add driver for the Qualcomm interconnect buses found in SM8450 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. This is based on the downstream driver by Vivek Aknurwar <viveka@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211209084842.189627-3-vkoul@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-06Merge branch 'icc-sc7280' into icc-nextGeorgi Djakov2-1/+21
Add Epoch Subsystem (EPSS) L3 provider support on SM7280 SoCs. * icc-sc7280 dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280 interconnect: qcom: Add EPSS L3 support on SC7280 Link: https://lore.kernel.org/r/1634812857-10676-1-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-06Merge branch 'icc-msm8996' into icc-nextGeorgi Djakov6-0/+2271
This series adds a driver for interconnects on MSM8996. This fixes some rare display underflows and provides a slight heat reduction. * icc-msm8996 dt-bindings: interconnect: Combine SDM660 bindings into RPM schema interconnect: icc-rpm: Add support for bus power domain dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings interconnect: qcom: Add MSM8996 interconnect provider driver Link: https://lore.kernel.org/r/20211021132329.234942-1-y.oudjana@protonmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-06interconnect: qcom: rpm: Prevent integer overflow in rateStephan Gerhold1-0/+1
Using icc-rpm on ARM32 currently results in clk_set_rate() errors during boot, e.g. "bus clk_set_rate error: -22". This is very similar to commit 7381e27b1e56 ("interconnect: qcom: msm8974: Prevent integer overflow in rate") where the u64 is converted to a signed long during clock rate rounding, resulting in an overflow on 32-bit platforms. Let's fix it similarly by making sure that the rate does not exceed LONG_MAX. Such high clock rates will surely result in the maximum frequency of the bus anyway. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211206114542.45325-1-stephan@gerhold.net Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-06interconnect: icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode checkShawn Guo1-2/+2
Use NOC_QOS_MODE_INVALID for invalid qos_mode check to improve the readability. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20211206075808.18124-2-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-11-30interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregateMike Tipton4-8/+5
We're only adding BCMs to the commit list in aggregate(), but there are cases where pre_aggregate() is called without subsequently calling aggregate(). In particular, in icc_sync_state() when a node with initial BW has zero requests. Since BCMs aren't added to the commit list in these cases, we don't actually send the zero BW request to HW. So the resources remain on unnecessarily. Add BCMs to the commit list in pre_aggregate() instead, which is always called even when there are no requests. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> [georgi: remove icc_sync_state for platforms with incomplete support] Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-11-22interconnect: qcom: Add MSM8996 interconnect provider driverYassine Oudjana4-0/+2263
Add a driver for the MSM8996 NoCs. This chip is similar to SDM660 where some busses are controlled by RPM, while others directly by the AP with writes to QoS registers. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Link: https://lore.kernel.org/r/20211021132329.234942-5-y.oudjana@protonmail.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-11-22interconnect: icc-rpm: Add support for bus power domainYassine Oudjana2-0/+8
Add support for attaching to a power domain. This is required for Aggregate 0 NoC on MSM8996, which is powered by a GDSC. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c Link: https://lore.kernel.org/r/20211021132329.234942-3-y.oudjana@protonmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-11-22interconnect: qcom: Add EPSS L3 support on SC7280Odelu Kukatla2-1/+21
Add Epoch Subsystem (EPSS) L3 interconnect provider support on SC7280 SoCs. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1634812857-10676-3-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04Merge branch 'icc-rpm' into icc-nextGeorgi Djakov6-908/+4815
This patch series merges support for AP-owned and bus QoS from SDM660 into common code (icc-rpm.c). MSM8916 and MSM8939 support code is extended to support these features. As I was touching these drivers, per Bjorn's suggestion expand DEFINE_QNODE macros (which makes adding QoS support much easier to review). * icc-rpm interconnect: icc-rpm: move bus clocks handling into qnoc_probe interconnect: sdm660: expand DEFINE_QNODE macros interconnect: sdm660: drop default/unused values interconnect: sdm660: merge common code into icc-rpm interconnect: icc-rpm: add support for QoS reg offset interconnect: msm8916: expand DEFINE_QNODE macros interconnect: msm8916: add support for AP-owned nodes interconnect: msm8939: expand DEFINE_QNODE macros interconnect: msm8939: add support for AP-owned nodes interconnect: qcs404: expand DEFINE_QNODE macros interconnect: qcom: drop DEFINE_QNODE macro Link: https://lore.kernel.org/r/20210903232421.1384199-1-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: samsung: describe drivers in KConfigKrzysztof Kozlowski1-2/+4
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924133441.112263-1-krzysztof.kozlowski@canonical.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: qcom: drop DEFINE_QNODE macroDmitry Baryshkov1-14/+0
Drop DEFINE_QNODE macro which has become unused. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20210903232421.1384199-12-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: qcs404: expand DEFINE_QNODE macrosDmitry Baryshkov1-73/+881
To follow the example of the rest of icc-rpm.h drivers, expand DEFINE_QNODE macros in the driver. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210903232421.1384199-11-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: msm8939: add support for AP-owned nodesDmitry Baryshkov1-0/+115
Port support for AP-owned nodes from the downstream device tree. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210903232421.1384199-10-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: msm8939: expand DEFINE_QNODE macrosDmitry Baryshkov1-89/+1066
In preparation to adding AP-owned nodes support to msm8939 expand DEFINE_QNODE macros in the driver. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210903232421.1384199-9-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: msm8916: add support for AP-owned nodesDmitry Baryshkov1-0/+100
Port support for AP-owned nodes from the downstream device tree. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210903232421.1384199-8-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: msm8916: expand DEFINE_QNODE macrosDmitry Baryshkov1-85/+1016
In preparation to adding AP-owned nodes support to msm8916 expand DEFINE_QNODE macros in the driver. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210903232421.1384199-7-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: icc-rpm: add support for QoS reg offsetDmitry Baryshkov2-10/+17
SDM660 driver expects to have QoS registers at the beginning of NoC address space (sdm660 platform shifts NoC base address). Add support for using QoS register offset, so that other platforms do not have to change existing device trees. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210903232421.1384199-6-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: sdm660: merge common code into icc-rpmDmitry Baryshkov3-494/+274
Other RPM interconnect drivers might also use QoS support. Move AP-owned nodes support from SDM660 driver to common icc-rpm.c. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210903232421.1384199-5-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: sdm660: drop default/unused valuesDmitry Baryshkov1-343/+64
Simplify qnode setup by removing unused/default values. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210903232421.1384199-4-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: sdm660: expand DEFINE_QNODE macrosDmitry Baryshkov1-116/+1626
Expand DEFINE_QNODE macros, which with an addition of QoS become an ugly beast with tons of different arguments. While we are at it also move links lists to separate arrays. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210903232421.1384199-3-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-10-04interconnect: icc-rpm: move bus clocks handling into qnoc_probeDmitry Baryshkov5-47/+19
All icc-rpm drivers use the same set of bus clocks. Move handling of bus clocks to qnoc_probe. This both simplifies the code and allows using qnoc_probe as device's probe function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210903232421.1384199-2-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-09-13interconnect: qcom: sdm660: Add missing a2noc qos clocksShawn Guo1-0/+14
It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. Otherwise, qcom_icc_noc_set_qos_priority() call on mas_ufs or mas_usb_hs node will simply result in a hardware hang on SDM660 SoC. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210824043435.23190-3-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-09-13interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and maskShawn Guo1-5/+4
The NOC_QOS_PRIORITY shift and mask do not match what vendor kernel defines [1]. Correct them per vendor kernel. As the result of NOC_QOS_PRIORITY_P0_SHIFT being 0, the definition can be dropped and regmap_update_bits() call on P0 can be simplified a bit. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/drivers/soc/qcom/msm_bus/msm_bus_noc_adhoc.c?h=LA.UM.8.2.r1-04800-sdm660.0#n37 Fixes: f80a1d414328 ("interconnect: qcom: Add SDM660 interconnect provider driver") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210902054915.28689-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-09-13interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfgShawn Guo1-1/+1
The id of slv_cnoc_mnoc_cfg node is mistakenly coded as id of slv_blsp_1. It causes the following warning on slv_blsp_1 node adding. Correct the id of slv_cnoc_mnoc_cfg node. [ 1.948180] ------------[ cut here ]------------ [ 1.954122] WARNING: CPU: 2 PID: 7 at drivers/interconnect/core.c:962 icc_node_add+0xe4/0xf8 [ 1.958994] Modules linked in: [ 1.967399] CPU: 2 PID: 7 Comm: kworker/u16:0 Not tainted 5.14.0-rc6-next-20210818 #21 [ 1.970275] Hardware name: Xiaomi Redmi Note 7 (DT) [ 1.978169] Workqueue: events_unbound deferred_probe_work_func [ 1.982945] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.988849] pc : icc_node_add+0xe4/0xf8 [ 1.995699] lr : qnoc_probe+0x350/0x438 [ 1.999519] sp : ffff80001008bb10 [ 2.003337] x29: ffff80001008bb10 x28: 000000000000001a x27: ffffb83ddc61ee28 [ 2.006818] x26: ffff2fe341d44080 x25: ffff2fe340f3aa80 x24: ffffb83ddc98f0e8 [ 2.013938] x23: 0000000000000024 x22: ffff2fe3408b7400 x21: 0000000000000000 [ 2.021054] x20: ffff2fe3408b7410 x19: ffff2fe341d44080 x18: 0000000000000010 [ 2.028173] x17: ffff2fe3bdd0aac0 x16: 0000000000000281 x15: ffff2fe3400f5528 [ 2.035290] x14: 000000000000013f x13: ffff2fe3400f5528 x12: 00000000ffffffea [ 2.042410] x11: ffffb83ddc9109d0 x10: ffffb83ddc8f8990 x9 : ffffb83ddc8f89e8 [ 2.049527] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 [ 2.056645] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : ffffb83ddc9903b0 [ 2.063764] x2 : 1a1f6fde34d45500 x1 : ffff2fe340f3a880 x0 : ffff2fe340f3a880 [ 2.070882] Call trace: [ 2.077989] icc_node_add+0xe4/0xf8 [ 2.080247] qnoc_probe+0x350/0x438 [ 2.083718] platform_probe+0x68/0xd8 [ 2.087191] really_probe+0xb8/0x300 [ 2.091011] __driver_probe_device+0x78/0xe0 [ 2.094659] driver_probe_device+0x80/0x110 [ 2.098911] __device_attach_driver+0x90/0xe0 [ 2.102818] bus_for_each_drv+0x78/0xc8 [ 2.107331] __device_attach+0xf0/0x150 [ 2.110977] device_initial_probe+0x14/0x20 [ 2.114796] bus_probe_device+0x9c/0xa8 [ 2.118963] deferred_probe_work_func+0x88/0xc0 [ 2.122784] process_one_work+0x1a4/0x338 [ 2.127296] worker_thread+0x1f8/0x420 [ 2.131464] kthread+0x150/0x160 [ 2.135107] ret_from_fork+0x10/0x20 [ 2.138495] ---[ end trace 5eea8768cb620e87 ]--- Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: f80a1d414328 ("interconnect: qcom: Add SDM660 interconnect provider driver") Link: https://lore.kernel.org/r/20210823014003.31391-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-24Merge tag 'icc-5.15-rc1' of ↵Greg Kroah-Hartman15-683/+962
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.15 Here are changes for the 5.15-rc1 merge window consisting of interconnect core and driver updates. Framework change: - Add sanity check to detect if node is already added to provider. Driver changes: - RPMh drivers probe function consolidation - Add driver for SC8180x platforms - Add support for SC8180x OSM L3 - Use driver-specific naming in OSM L3 Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: osm-l3: Use driver-specific naming interconnect: qcom: osm-l3: Add sc8180x support dt-bindings: interconnect: Add SC8180x to OSM L3 DT binding interconnect: qcom: Add SC8180x providers dt-bindings: interconnect: Add Qualcomm SC8180x DT bindings interconnect: Sanity check that node isn't already on list interconnect: qcom: icc-rpmh: Consolidate probe functions
2021-08-12Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate"Georgi Djakov1-5/+5
This reverts commit f84f5b6f72e68bbaeb850b58ac167e4a3a47532a, which is causing regressions on some platforms, preventing them to boot or do a clean reboot. This is because the above commit is sending also all the zero bandwidth requests to turn off any resources that might be enabled unnecessarily, but currently this may turn off interconnects that are enabled by default, but with no consumer to keep them on. Let's revert this for now as some platforms are not ready for such change yet. In the future we can introduce some _ignore_unused option that could keep also the unused resources on platforms that have only partial interconnect support and also add .shutdown callbacks to deal with disabling the resources in the right order. Reported-by: Stephen Boyd <swboyd@chromium.org> Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/CAE-0n52iVgX0JjjnYi=NDg49xP961p=+W5R2bmO+2xwRceFhfA@mail.gmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-09interconnect: qcom: osm-l3: Use driver-specific namingBjorn Andersson1-23/+23
In situations were the developer screws up by e.g. not giving the OSM nodes unique identifiers the interconnect framework might mix up nodes between the OSM L3 provider and e.g. the RPMh provider. The resulting callstack contains "qcom_icc_set", which is not unique to the OSM L3 provider driver. Once the faulting qcom_icc_set() is identified it's further confusing that "qcom_icc_node" is different between the different drivers. To avoid this confusion, rename the node struct and the setter in the OSM L3 driver to include "osm_l3" in their names. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210725031414.3961227-1-bjorn.andersson@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-09interconnect: qcom: osm-l3: Add sc8180x supportBjorn Andersson2-0/+20
Add support for the Qualcomm SC8180x platform to the OSM L3 driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210725025834.3941777-2-bjorn.andersson@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-09interconnect: qcom: Add SC8180x providersGeorgi Djakov4-0/+809
The SC8180x contains the usual RPMH based interconnect providers, add a driver which defines the various busses and ports. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210723194243.3675795-2-bjorn.andersson@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-02interconnect: Fix undersized devress_alloc allocationColin Ian King1-1/+1
The expression sizeof(**ptr) for the void **ptr is just 1 rather than the size of a pointer. Fix this by using sizeof(*ptr). Addresses-Coverity: ("Wrong sizeof argument") Fixes: e145d9a184f2 ("interconnect: Add devm_of_icc_get() as exported API for users") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730075408.19945-1-colin.king@canonical.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-30interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregateMike Tipton1-5/+5
We're only adding BCMs to the commit list in aggregate(), but there are cases where pre_aggregate() is called without subsequently calling aggregate(). In particular, in icc_sync_state() when a node with initial BW has zero requests. Since BCMs aren't added to the commit list in these cases, we don't actually send the zero BW request to HW. So the resources remain on unnecessarily. Add BCMs to the commit list in pre_aggregate() instead, which is always called even when there are no requests. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-5-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-30interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodesMike Tipton1-7/+5
We currently only enforce BW floors for a subset of nodes in a path. All BCMs that need updating are queued in the pre_aggregate/aggregate phase. The first set() commits all queued BCMs and subsequent set() calls short-circuit without committing anything. Since the floor BW isn't set in sum_avg/max_peak until set(), then some BCMs are committed before their associated nodes reflect the floor. Set the floor as each node is being aggregated. This ensures that all all relevant floors are set before the BCMs are committed. Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-4-mdtipton@codeaurora.org [georgi: Removed unused variable] Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-22interconnect: Always call pre_aggregate before aggregateMike Tipton1-0/+5
The pre_aggregate callback isn't called in all cases before calling aggregate. Add the missing calls so providers can rely on consistent framework behavior. Fixes: d3703b3e255f ("interconnect: Aggregate before setting initial bandwidth") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-22interconnect: Zero initial BW after sync-stateMike Tipton1-0/+2
The initial BW values may be used by providers to enforce floors. Zero these values after sync-state so that providers know when to stop enforcing them. Fixes: b1d681d8d324 ("interconnect: Add sync state support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-22interconnect: Sanity check that node isn't already on listBjorn Andersson1-0/+3
Broken interconnect providers might add the same node multiple times or in multiple providers, which causes strange errors as the provider's node list is later traversed. Detect that a node already has an associated provider, complain and reject the addition of the node, to aid the developer. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210625234903.1324755-1-bjorn.andersson@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-22interconnect: qcom: icc-rpmh: Consolidate probe functionsMike Tipton9-662/+109
The current probe/remove functions are implemented separately for each target, but they are almost identical. Replace them with common functions that can be used across all rpmh targets. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210621214241.13521-1-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-06-22Merge tag 'icc-5.14-rc1' of ↵Greg Kroah-Hartman4-0/+2103
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.14 Here are changes for the 5.14-rc1 merge window consisting of interconnect driver updates. Driver changes: - New driver for SC7280 platforms. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add SC7280 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SC7280 DT bindings
2021-05-11interconnect: qcom: Add SC7280 interconnect provider driverOdelu Kukatla4-0/+2103
Add driver for the Qualcomm interconnect buses found in SC7280 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Link: https://lore.kernel.org/r/1619517059-12109-3-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11interconnect: qcom: Add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11interconnect: qcom: bcm-voter: add a missing of_node_put()Subbaraman Narayanamurthy1-1/+2
Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak. Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov <djakov@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 19:19:11 +0000