summaryrefslogtreecommitdiffstats
path: root/drivers/interconnect
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16Merge tag 'arm-soc-dt-5.11' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...
2020-12-08Merge tag 'qcom-arm64-for-5.11' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. * tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits) arm64: dts: qcom: c630: Define eDP bridge and panel arm64: dts: qcom: c630: Fix pinctrl pins properties arm64: dts: qcom: c630: Polish i2c-hid devices arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver arm64: dts: sdm845: Add interconnect properties for QUP interconnect: qcom: sdm845: Add the missing nodes for QUP dt-bindings: interconnect: sdm845: Add IDs for the QUP ports arm64: dts: qcom: c630: Expose LID events arm64: dts: qcom: c630: Re-enable apps_smmu dts: qcom: sdm845: Add dt entries to support crypto engine. arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: limit IPA iommu streams arm64: dts: qcom: sm8150: Add Coresight support arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor ... Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-04Merge tag 'icc-5.11-rc1' of ↵Greg Kroah-Hartman6-11/+222
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.11 Here are the interconnect changes for the 5.10-rc1 merge window consisting of new driver and a cleanup. Driver changes: - New driver for Samsung Exynos SoCs - Misc cleanups Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: MAINTAINERS: Add entry for Samsung interconnect drivers interconnect: Add generic interconnect driver for Exynos SoCs interconnect: qcom: Simplify the vcd compare function
2020-11-30interconnect: qcom: sdm845: Add the missing nodes for QUPGeorgi Djakov1-0/+3
The QUP nodes are currently defined just as entries in the topology, but they are not referenced by any of the NoCs. Let's fix this and "attach" them to their NoCs, so that the QUP drivers are able to use them as path endpoints and scale their bandwidth. This is based on the information from the downstream msm-4.9 kernel. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201105135211.7160-2-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30interconnect: Add generic interconnect driver for Exynos SoCsSylwester Nawrocki5-0/+218
This patch adds a generic interconnect driver for Exynos SoCs in order to provide interconnect functionality for each "samsung,exynos-bus" compatible device. The SoC topology is a graph (or more specifically, a tree) and its edges are described by specifying in the 'interconnects' property the interconnect consumer path for each interconnect provider DT node. Each bus is now an interconnect provider and an interconnect node as well (cf. Documentation/interconnect/interconnect.rst), i.e. every bus registers itself as a node. Node IDs are not hard coded but rather assigned dynamically at runtime. This approach allows for using this driver with various Exynos SoCs. Frequencies requested via the interconnect API for a given node are propagated to devfreq using dev_pm_qos_update_request(). Please note that it is not an error when CONFIG_INTERCONNECT is 'n', in which case all interconnect API functions are no-op. The samsung,data-clk-ratio DT property is used to specify the ratio of the interconect bandwidth to the minimum data clock frequency for each bus. Due to unspecified relative probing order, -EPROBE_DEFER may be propagated to ensure that the parent is probed before its children. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201112140931.31139-3-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-30interconnect: qcom: Simplify the vcd compare functionGeorgi Djakov1-11/+4
Let's simplify the cmp_vcd() function and replace the conditionals with just a single statement, which also improves readability. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20201013171923.7351-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: fix memory trashing in of_count_icc_providers()Marek Szyprowski1-1/+0
of_count_icc_providers() function uses for_each_available_child_of_node() helper to recursively check all the available nodes. This helper already properly handles child nodes' reference count, so there is no need to do it explicitly. Remove the excessive call to of_node_put(). This fixes memory trashing when CONFIG_OF_DYNAMIC is enabled (for example arm/multi_v7_defconfig). Fixes: b1d681d8d324 ("interconnect: Add sync state support") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201119103746.32564-1-m.szyprowski@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: qcom: qcs404: Remove GPU and display RPM IDsGeorgi Djakov1-2/+2
The following errors are noticed during boot on a QCS404 board: [ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6 [ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6 These errors show when we try to configure the GPU and display nodes. Since these particular nodes aren't supported on RPM and are purely local, we should just change their mas_rpm_id to -1 to avoid any requests being sent for these master IDs. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodesGeorgi Djakov1-6/+6
Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20201112105140.10092-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-18interconnect: qcom: msm8974: Don't boost the NoC rate during bootGeorgi Djakov1-0/+9
It has been reported that on Fairphone 2 (msm8974-based), increasing the clock rate for some of the NoCs during boot may lead to hangs. Let's restore the original behavior and not touch the clock rate of any of the NoCs to fix the regression. Reported-by: Luca Weiss <luca@z3ntu.xyz> Tested-by: Luca Weiss <luca@z3ntu.xyz> Fixes: b1d681d8d324 ("interconnect: Add sync state support") Link: https://lore.kernel.org/r/20201109124512.10776-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-18interconnect: qcom: msm8974: Prevent integer overflow in rateGeorgi Djakov1-0/+3
When sync_state support got introduced recently, by default we try to set the NoCs to run initially at maximum rate. But as these values are aggregated, we may end with a really big clock rate value, which is then converted from "u64" to "long" during the clock rate rounding. But on 32bit platforms this may result an overflow. Fix it by making sure that the rate is within range. Reported-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20201106144847.7726-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-27interconnect: qcom: use icc_sync state for sm8[12]50Dmitry Baryshkov2-6/+8
In addition to the rest of Qcom interconnect drivers use icc_sync_state for SM8150/SM8250 interconnect drivers to notify the interconnect framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Also move the BCM initialization before creating the nodes to set the max bandwidth in hardware for the initialization/probing stage. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-22interconnect: qcom: Ensure that the floor bandwidth value is enforcedGeorgi Djakov1-0/+7
Take into account the initial bandwidth from the framework and update the internal sum and max values before committing if needed. This will ensure that the floor bandwidth values are enforced until the providers get into sync state. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Tested-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/20201021155938.9223-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sc7180: Init BCMs before creating the nodesGeorgi Djakov1-3/+3
Currently if we use sync_state, by default the bandwidth is maxed out, but in order to set this in hardware, the BCMs (Bus Clock Managers) need to be initialized first. Move the BCM initialization before creating the nodes to fix this. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-3-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sdm845: Init BCMs before creating the nodesGeorgi Djakov1-3/+3
Currently if we use sync_state, by default the bandwidth is maxed out, but in order to set this in hardware, the BCMs (Bus Clock Managers) need to be initialized first. Move the BCM initialization before creating the nodes to fix this. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: Aggregate before setting initial bandwidthGeorgi Djakov1-0/+3
When setting the initial bandwidth, make sure to call the aggregate() function (if such is implemented for the current provider), to handle cases when data needs to be aggregated first. Fixes: b1d681d8d324 ("interconnect: Add sync state support") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sdm845: Enable keepalive for the MM1 BCMGeorgi Djakov1-1/+1
After enabling interconnect scaling for display on the db845c board, in certain configurations the board hangs, while the following errors are observed on the console: Error sending AMC RPMH requests (-110) qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 ... In this specific case, the above is related to one of the sequencers being stuck, while client drivers are returning from probe and trying to disable the currently unused clock and interconnect resources. Generally we want to keep the multimedia NoC enabled like the rest of the NoCs, so let's set the keepalive flag on it too. Fixes: aae57773fbe0 ("interconnect: qcom: sdm845: Split qnodes into their respective NoCs") Reported-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Tested-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20201012194034.26944-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-21interconnect: imx: simplify the return expression of imx_icc_unregisterLiu Shixin1-6/+1
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200921082437.2591461-1-liushixin2@huawei.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: imx: Simplify with dev_err_probe()Krzysztof Kozlowski1-4/+2
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902172433.1138-2-krzk@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: core: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+2
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902172433.1138-1-krzk@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18Merge branch 'icc-syncstate' into icc-nextGeorgi Djakov4-0/+70
* icc-syncstate: interconnect: Add get_bw() callback interconnect: Add sync state support interconnect: qcom: Use icc_sync_state Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: qcom: Use icc_sync_stateGeorgi Djakov3-0/+3
Lowering the bandwidth on the bus might have negative consequences if it's done before all consumers had a chance to cast their vote. Now by default the framework sets the bandwidth to maximum during boot. We need to use the icc_sync_state callback to notify the framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Link: https://lore.kernel.org/r/20200825170152.6434-4-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: Add sync state supportGeorgi Djakov1-0/+67
The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-15interconnect: qcom: osm-l3: Mark more structures constStephen Boyd1-9/+10
These structures aren't modified at runtime. Mark them const so they get moved to read-only memory. We have to cast away const in one place when we store into the data member of struct icc_node. This is paired with a re-const of the data member when it is extracted in qcom_icc_set(). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200914182112.513981-1-swboyd@chromium.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add EPSS L3 support on SM8250Sibi Sankar2-0/+25
Add Epoch Subsystem (EPSS) L3 interconnect provider support on SM8250 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200801123049.32398-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Lay the groundwork for adding EPSS supportSibi Sankar1-11/+26
Lay the groundwork for adding Epoch Subsystem (EPSS) L3 support on SM8250. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200801123049.32398-4-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add OSM L3 support on SM8150Sibi Sankar2-0/+17
Add Operation State Manager (OSM) L3 interconnect provider support on SM8150 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200801123049.32398-3-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: sc7180: Replace xlate with xlate_extendedSibi Sankar1-1/+1
Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-7-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: sdm845: Replace xlate with xlate_extendedGeorgi Djakov1-1/+1
Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-5-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Implement xlate_extended() to parse tagsGeorgi Djakov2-0/+28
Implement a function to parse the arguments of the "interconnects" DT property and populate the interconnect path tags if this information is available. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200903133134.17201-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: Introduce xlate_extended() callbackGeorgi Djakov1-23/+50
Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add support for per-BCM scaling factorsMike Tipton3-2/+7
Currently, bcm-voter always assumes requests are made in KBps and that BCM HW always wants them in Bps, so it always scales the requests by 1000. However, certain use cases and BCMs may use different units. Thus, add support for BCM-specific scaling factors. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-7-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Only wait for completion in AMC/WAKE by defaultMike Tipton1-1/+1
Change the default TCS wait behavior to only wait for completion in AMC and WAKE. Waiting isn't necessary in the SLEEP TCS, since votes are only being removed in this case. Resources can be safely disabled asynchronously in parallel with the rest of the power collapse sequence. This reduces the sleep entry latency. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-6-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Support bcm-voter-specific TCS wait behaviorMike Tipton1-11/+21
Currently, all bcm-voters set tcs_cmd::wait=true for the last VCD command in each TCS (AMC, WAKE, and SLEEP). However, some bcm-voters don't need the completion and instead need to optimize for latency. For instance, disabling wait-for-completion in the WAKE set can decrease resume latency and allow for certain operations to occur in parallel with the WAKE TCS triggering. This is only safe in very specific situations. Keep the default behavior of always waiting, but allow it to be overridden in devicetree. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-5-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08dt-bindings: interconnect: Add generic qcom bindingsMike Tipton1-16/+2
Add generic qcom interconnect bindings that are common across platforms. In particular, these include QCOM_ICC_TAG_* macros that clients can use when calling icc_set_tag(). Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200903192149.30385-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add SM8250 interconnect provider driverJonathan Marek4-0/+825
Add driver for the Qualcomm interconnect buses found in SM8250 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SC7180 driver and generated from downstream dts. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200728023811.5607-6-jonathan@marek.ca Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add SM8150 interconnect provider driverJonathan Marek4-0/+799
Add driver for the Qualcomm interconnect buses found in SM8150 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SC7180 driver and generated from downstream dts. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200728023811.5607-5-jonathan@marek.ca Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: Add bulk API helpersGeorgi Djakov2-1/+118
There are drivers which just need to get multiple interconnect paths, request some predefined amounts of bandwidth and then just toggle the paths between enabled/disabled state. The aim of this patch is simplify the above and to allow drivers to put all the path names and bandwidth data into a single static icc_bulk_data table and call the icc_bulk_* functions on that table in order to scale all the interconnect paths in parallel. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200729123439.9961-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-04interconnect: qcom: Fix small BW votes being truncated to zeroMike Tipton1-8/+19
Small BW votes that translate to less than a single BCM unit are currently truncated to zero. Ensure that non-zero BW requests always result in at least a vote of 1 to BCM. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03interconnect: Show bandwidth for disabled paths as zero in debugfsMatthias Kaehlcke1-2/+8
For disabled paths the 'interconnect_summary' in debugfs currently shows the orginally requested bandwidths. This is confusing, since the bandwidth requests aren't active. Instead show the bandwidths for disabled paths/requests as zero. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-05Merge tag 'char-misc-5.9-rc1' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-07-27Merge 5.8-rc7 into char-misc-nextGreg Kroah-Hartman2-10/+16
This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23interconnect: msm8916: Fix buswidth of pcnoc_s nodesGeorgi Djakov1-7/+7
The buswidth of the pcnoc_s_* nodes is actually not 8, but 4 bytes. Let's fix it. Reported-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Link: https://lore.kernel.org/r/20200709130004.12462-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200723083735.5616-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23interconnect: Do not skip aggregation for disabled pathsGeorgi Djakov1-3/+9
When an interconnect path is being disabled, currently we don't aggregate the requests for it afterwards. But the re-aggregation step shouldn't be skipped, as it may leave the nodes with outdated bandwidth data. This outdated data may actually keep the path still enabled and prevent the device from going into lower power states. Reported-by: Atul Dhudase <adhudase@codeaurora.org> Fixes: 7d374b209083 ("interconnect: Add helpers for enabling/disabling a path") Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Atul Dhudase <adhudase@codeaurora.org> Reviewed-by: Atul Dhudase <adhudase@codeaurora.org> Link: https://lore.kernel.org/r/20200721120740.3436-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200723083735.5616-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22soc: qcom: rpmh: Update rpmh_invalidate function to return voidMaulik Shah1-5/+1
Currently rpmh_invalidate() always returns success. Update its return type to void. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-16interconnect: Allow inter-provider pairs to be configuredArtur Świgoń1-6/+5
This patch adds support for a new boolean 'inter_set' field in struct icc_provider. Setting it to 'true' enables calling '->set' for inter-provider node pairs. All existing users of the interconnect framework allocate this structure with kzalloc, and are therefore unaffected by this change. This makes it easier for hierarchies like exynos-bus, where every bus is probed separately and registers a separate interconnect provider, to model constraints between buses. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-06-16interconnect: Relax requirement in of_icc_get_from_provider()Artur Świgoń1-1/+1
This patch relaxes the condition in of_icc_get_from_provider() so that it is no longer required to set '#interconnect-cells' to <1> in the DT, and therefore it is not required to supply dummy node IDs in the 'interconnects' property when node IDs are dynamically generated rather than hardcoded (statically allocated). In case of the devfreq driver for exynos-bus, node IDs are dynamically allocated and '#interconnect-cells' is always zero. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200521122841.8867-3-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-06-16interconnect: Export of_icc_get_from_provider()Artur Świgoń1-1/+2
This patch makes the above function public (for use in exynos-bus devfreq driver). Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200521122841.8867-2-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-06-10Merge tag 'pm-5.8-rc1-2' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 05:22:22 +0000