summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2022-06-07Merge tag 'input-for-v5.19-rc1' of ↵Linus Torvalds3-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - proper annotation of USB buffers in bcm5974 touchpad dirver - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F - a fix for missing dependency in raspberrypi-ts driver to avoid compile breakages with random configs. * tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag Input: raspberrypi-ts - add missing HAS_IOMEM dependency
2022-06-07Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to ↵Marius Hoch1-2/+2
dmi_use_low_level_irq Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-07Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flagMathias Nyman1-1/+6
The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-04Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds6-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds5-135/+83
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-31Input: raspberrypi-ts - add missing HAS_IOMEM dependencyRandy Dunlap1-0/+1
Since JOYSTICK_SENSEHAT selects MFD_SIMPLE_MFD_I2C and the latter depends on HAS_IOMEM, and since 'select' does not follow any dependency chains, JOYSTICK_SENSEHAT should also depend on HAS_IOMEM to prevent a kconfig warning and a build error: WARNING: unmet direct dependencies detected for MFD_SIMPLE_MFD_I2C Depends on [n]: HAS_IOMEM [=n] && I2C [=y] Selected by [y]: - JOYSTICK_SENSEHAT [=y] && INPUT_JOYSTICK [=y] && INPUT [=y] && I2C [=y] s390-linux-ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe': simple-mfd-i2c.c:(.text+0xc8): undefined reference to `devm_mfd_add_devices' Fixes: 41657514c796 ("Input: add Raspberry Pi Sense HAT joystick driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220531022942.16340-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-28Merge tag 'input-for-v5.19-rc0' of ↵Linus Torvalds22-62/+2840
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS7222A/B/C capacitive touch controller - a new driver for Raspberry Pi Sense HAT joystick - sun4i-lradc-keys gained support of R329 and D1 variants, plus it can be now used as a wakeup source - pm8941-pwrkey can now properly handle PON GEN3 variants; the driver also implements software debouncing and has a workaround for missing key press events - assorted driver fixes and cleanups * tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: stmfts - do not leave device disabled in stmfts_input_open Input: gpio-keys - cancel delayed work only in case of GPIO Input: cypress_ps2 - fix typo in comment Input: vmmouse - disable vmmouse before entering suspend mode dt-bindings: google,cros-ec-keyb: Fixup bad compatible match Input: cros-ec-keyb - allow skipping keyboard registration dt-bindings: google,cros-ec-keyb: Introduce switches only compatible Input: psmouse-smbus - avoid flush_scheduled_work() usage Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare Input: sparcspkr - fix refcount leak in bbc_beep_probe Input: sun4i-lradc-keys - add support for R329 and D1 Input: sun4i-lradc-keys - add optional clock/reset support dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles Input: sun4i-lradc-keys - add wakeup support Input: pm8941-pwrkey - simulate missed key press events Input: pm8941-pwrkey - add software key press debouncing support Input: pm8941-pwrkey - add support for PON GEN3 base addresses Input: pm8941-pwrkey - fix error message Input: synaptics-rmi4 - remove unnecessary flush_workqueue() Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper ...
2022-05-27Merge branch 'next' into for-linusDmitry Torokhov22-62/+2840
Prepare input updates for 5.19 merge window.
2022-05-27xen: switch gnttab_end_foreign_access() to take a struct page pointerJuergen Gross1-2/+2
Instead of a virtual kernel address use a pointer of the associated struct page as second parameter of gnttab_end_foreign_access(). Most users have that pointer available already and are creating the virtual address from it, risking problems in case the memory is located in highmem. gnttab_end_foreign_access() itself won't need to get the struct page from the address again. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-26Input: stmfts - do not leave device disabled in stmfts_input_openDmitry Torokhov1-8/+8
The commit 26623eea0da3 attempted to deal with potential leak of runtime PM counter when opening the touchscreen device, however it ended up erroneously dropping the counter in the case of successfully enabling the device. Let's address this by using pm_runtime_resume_and_get() and then executing pm_runtime_put_sync() only when we fail to send "sense on" command to the device. Fixes: 26623eea0da3 ("Input: stmfts - fix reference leak in stmfts_input_open") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-26Input: gpio-keys - cancel delayed work only in case of GPIOLad Prabhakar1-1/+1
gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : __flush_work+0x414/0x470 [ 360.342385] lr : __cancel_work_timer+0x140/0x1b0 [ 360.347065] sp : ffff80000a7fba00 [ 360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000 [ 360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001 [ 360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000 [ 360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48 [ 360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40 [ 360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c [ 360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008 [ 360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080 [ 360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458 [ 360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000 [ 360.422818] Call trace: [ 360.425299] __flush_work+0x414/0x470 [ 360.429012] __cancel_work_timer+0x140/0x1b0 [ 360.433340] cancel_delayed_work_sync+0x10/0x18 [ 360.437931] gpio_keys_quiesce_key+0x28/0x58 [gpio_keys] [ 360.443327] devm_action_release+0x10/0x18 [ 360.447481] release_nodes+0x8c/0x1a0 [ 360.451194] devres_release_all+0x90/0x100 [ 360.455346] device_unbind_cleanup+0x14/0x60 [ 360.459677] device_release_driver_internal+0xe8/0x168 [ 360.464883] driver_detach+0x4c/0x90 [ 360.468509] bus_remove_driver+0x54/0xb0 [ 360.472485] driver_unregister+0x2c/0x58 [ 360.476462] platform_driver_unregister+0x10/0x18 [ 360.481230] gpio_keys_exit+0x14/0x828 [gpio_keys] [ 360.486088] __arm64_sys_delete_module+0x1e0/0x270 [ 360.490945] invoke_syscall+0x40/0xf8 [ 360.494661] el0_svc_common.constprop.3+0xf0/0x110 [ 360.499515] do_el0_svc+0x20/0x78 [ 360.502877] el0_svc+0x48/0xf8 [ 360.505977] el0t_64_sync_handler+0x88/0xb0 [ 360.510216] el0t_64_sync+0x148/0x14c [ 360.513930] irq event stamp: 4306 [ 360.517288] hardirqs last enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0 [ 360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88 [ 360.534204] softirqs last enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0 [ 360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0 [ 360.550591] ---[ end trace 0000000000000000 ]--- Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220524135822.14764-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-21Merge tag 'input-for-v5.18-rc7' of ↵Linus Torvalds1-12/+8
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A small fixup to ili210x touchscreen driver, and updated maintainer entry for the device tree binding of Mediatek 6779 keypad: - fix reset timing of Ilitek touchscreens - update maintainer entry of DT binding of Mediatek 6779 keypad" * tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ili210x - use one common reset implementation Input: ili210x - fix reset timing dt-bindings: input: mediatek,mt6779-keypad: update maintainer
2022-05-21Input: cypress_ps2 - fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-27-Julia.Lawall@inria.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-18Merge branch 'ib/5.17-cros-ec-keyb' into nextDmitry Torokhov3-26/+57
Merge changes to ChromeOS EC Keyboard driver.
2022-05-18Input: vmmouse - disable vmmouse before entering suspend modeZongmin Zhou1-0/+14
Currently, when trying to suspend and resume with VirtualPS/2 VMMouse there is an error message after resuming: psmouse serio1: vmmouse: Unable to re-enable mouse when reconnecting, err: -6 and the mouse will no longer be operable, requiring full rescan to find a another driver to use for the port. This error is due to QEMU still generating PS2 events which the kernel is not consuming until resume time, where they interfere with mouse identification and ultimately resulting in an error getting VMMOUSE_VERSION_ID. Test scenario: 1) start virtual machine with qemu command "vmport=on" 2) click suspend botton to enter suspend mode 3) resume and observe the error message in the kernel logs Let's fix this by disabling the vmmouse in its reset handler. This will notify qemu to stop vmmouse and remove the handler. Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn> Reviewed-by: Zack Rusin <zackr@vmware.com> Link: https://lore.kernel.org/r/20220322021046.1087954-1-zhouzongmin@kylinos.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-18Input: ili210x - use one common reset implementationMarek Vasut1-12/+8
Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its parameter from struct device * to struct gpio_desc *, and use it as one single consistent reset implementation all over the driver. Also increase the minimum reset duration to 12ms, to make sure the reset is really within the spec. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-18Input: ili210x - fix reset timingMarek Vasut1-2/+2
According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30 "2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum 10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset timings such that T4 is 12ms and T2 is 160ms to fit those figures. This prevents sporadic touch controller start up failures when some systems with at least ILI251x controller boot, without this patch the systems sometimes fail to communicate with the touch controller. Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-17Input: cros-ec-keyb - allow skipping keyboard registrationStephen Boyd1-11/+18
If the device is a detachable (and therefore lacks full keyboard), we may still want to load this driver because the device might have some other buttons or switches (e.g. volume and power buttons or a tablet mode switch). In such case we do not want to register the "main" keyboard device to allow userspace detect when the detachable keyboard is disconnected and adjust the system behavior for the tablet mode. Originally it was suggested to simply skip keyboard registration if row and columns properties didn't exist, but that approach did not convey the intent strongly enough and also had a slight problem for migrating existing DTBs without updating the kernel first, so it was decided to introduce new google,cros-ec-keyb-switches to explicitly mark devices that only have axillary buttons and switches. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220516183452.942008-3-swboyd@chromium.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16Input: psmouse-smbus - avoid flush_scheduled_work() usageTetsuo Handa1-2/+9
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local psmouse_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepareWan Jiabing1-2/+1
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL. Remove unneeded NULL check for kp->clk. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20220516085511.10679-1-wanjiabing@vivo.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16Input: sparcspkr - fix refcount leak in bbc_beep_probeMiaoqian Lin1-0/+1
of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-07Input: wm97xx - get rid of irq_enable method in wm97xx_mach_opsDmitry Torokhov2-18/+0
Now that we are using oneshot threaded IRQ this method is not used anymore. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [arnd: add the db1300 change as well] Cc: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07Input: wm97xx - switch to using threaded IRQDmitry Torokhov1-35/+7
Instead of manually disabling and enabling interrupts and scheduling work to access the device, let's use threaded oneshot interrupt handler. It simplifies things. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07Input: touchscreen: use wrapper for pxa2xx ac97 registersArnd Bergmann3-14/+16
To avoid a dependency on the pxa platform header files with hardcoded registers, change the driver to call a wrapper in the pxa2xx-ac97-lib that encapsulates all the other ac97 stuff. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: linux-input@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07input: touchscreen: mainstone: sync with zylonite driverArnd Bergmann1-28/+31
The two drivers are almost identical and can work on a variety of hardware in principle. The mainstone driver supports additional hardware, and the zylonite driver has a few cleanup patches. Sync the two by adding the zylonite changes into the mainstone one, and checking for the zylonite board to order to keep the default behavior (interrupt enabled) there. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07input: touchscreen: mainstone: fix pxa2xx+pxa3xx configurationArnd Bergmann1-12/+7
There are two different ways of flushing the ac97 queue in this driver, selected by a compile time option. Change this to a runtime selection to make it work when both are enabled. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: linux-input@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: zylonite: use gpio lookup instead mfp headerArnd Bergmann1-9/+11
The mach/mfp.h header is only used by this one driver for hardcoded gpio numbers. Change that to use a lookup table instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: mainstone-wm97xx: use gpio lookup tableArnd Bergmann1-21/+14
This driver hardcodes gpio numbers without a header file. Use lookup tables instead. Cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-input@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-05Input: sun4i-lradc-keys - add support for R329 and D1Samuel Holland1-0/+8
This LRADC variant uses the same 3/4*AVCC reference voltage as the A83T variant. The R329 and D1 LRADCs appear to be identical, so D1 support is accomplished through having the R329 LRADC as a fallback compatible. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220414002349.24332-3-samuel@sholland.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-05Input: sun4i-lradc-keys - add optional clock/reset supportSamuel Holland1-0/+33
Until the R329, the LRADC hardware was always active. Now it requires enabling a clock gate and deasserting a reset line. Add support for this variant of the hardware. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220414002349.24332-2-samuel@sholland.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-03Merge 5.18-rc5 into usb-nextGreg Kroah-Hartman2-1/+15
We need the USB fixes in here, and this resolves a merge issue in drivers/usb/dwc3/drd.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24Input: sun4i-lradc-keys - add wakeup supportOndrej Jirman1-4/+18
Allow the driver to wake the system on key press if the "wakeup-source" property is provided in the device tree. Using the LRADC as a wakeup source requires keeping the AVCC domain active during sleep. Since this has a nontrivial impact on power consumption (sometimes doubling it), disable the LRADC wakeup source by default. Signed-off-by: Ondrej Jirman <x@xff.cz> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220424161328.61103-1-samuel@sholland.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: pm8941-pwrkey - simulate missed key press eventsDavid Collins1-0/+11
The status of the keys connected to the KPDPWR_N and RESIN_N pins is identified by reading corresponding bits in the interrupt real time status register. If the status has changed by the time that the interrupt is handled then a press event will be missed. Maintain a last known status variable to find unbalanced release events and simulate press events for each accordingly. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-6-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: pm8941-pwrkey - add software key press debouncing supportDavid Collins1-6/+77
On certain PMICs, an unexpected assertion of KPDPWR_DEB (the positive logic hardware debounced power key signal) may be seen during the falling edge of KPDPWR_N (i.e. a power key press) when it occurs close to the rising edge of SLEEP_CLK. This then triggers a spurious KPDPWR interrupt. Handle this issue by adding software debouncing support to ignore key events that occur within the hardware debounce delay after the most recent key release event. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-5-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: pm8941-pwrkey - add support for PON GEN3 base addressesAnjelique Melendez1-7/+24
Currently, PON address is read from the "reg" property. For PON GEN3, which starts with PMK8350, the "reg" property will have both the PON HLOS and PON PBS addesses defined. Add support so that all PON generations can be configured. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-4-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: pm8941-pwrkey - fix error messageAnjelique Melendez1-1/+1
Currently, error message reads "failed to set debounce". However, code is attempting to read revision not set debounce. Fix this. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-3-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: synaptics-rmi4 - remove unnecessary flush_workqueue()ran jianping1-1/+0
All work currently pending will be done first by calling destroy_workqueue, so there is unnecessary to flush it explicitly. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ran jianping <ran.jianping@zte.com.cn> Link: https://lore.kernel.org/r/20220422093304.2781183-1-ran.jianping@zte.com.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: ep93xx_keypad - use devm_platform_ioremap_resource() helperLv Ruyi1-6/+1
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately. This makes the code simpler without functional changes. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20220418015036.2556731-1-lv.ruyi@zte.com.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: add Raspberry Pi Sense HAT joystick driverCharles Mirabile3-0/+149
This patch adds the driver for the Sense HAT joystick. It outputs BTN_DPAD key events when moved in any of the four directions and the BTN_SELECT event when depressed. Co-developed-by: Daniel Bauman <dbauman@redhat.com> Signed-off-by: Daniel Bauman <dbauman@redhat.com> Co-developed-by: Mwesigwa Guma <mguma@redhat.com> Signed-off-by: Mwesigwa Guma <mguma@redhat.com> Co-developed-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Charles Mirabile <cmirabil@redhat.com> Link: https://lore.kernel.org/r/20220419205158.28088-3-cmirabil@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: clps711x-keypad - use syscon_regmap_lookup_by_phandleAlexander Shiyan1-2/+1
Since version 5.13, the standard syscon bindings have been added to all clps711x DT nodes, so we can now use the more general syscon_regmap_lookup_by_phandle function to get the syscon pointer. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Link: https://lore.kernel.org/r/20220420062725.25614-1-eagle.alexander923@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-24Input: remove unneeded variable in input_inhibit_device()Changcheng Deng1-3/+1
Remove unneeded variable used to store return value. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Link: https://lore.kernel.org/r/20220419064255.2563333-1-deng.changcheng@zte.com.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-23Merge tag 'input-for-v5.18-rc3' of ↵Linus Torvalds2-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new set of keycodes to be used by marine navigation systems - minor fixes to omap4-keypad and cypress-sf drivers * tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add Marine Navigation Keycodes Input: omap4-keypad - fix pm_runtime_get_sync() error checking Input: cypress-sf - register a callback to disable the regulators
2022-04-23Input: remove third argument of usb_maxpacket()Vincent Mailhol6-6/+6
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Ville Syrjala <syrjala@sci.fi> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-4-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21input: omap: void using mach/*.h headersArnd Bergmann1-0/+1
The omap-keypad driver currently relies on including mach/memory.h implicitly, but that won't happen once omap1 is converted to CONFIG_ARCH_MULTIPLATFORM. Include the required header explicitly. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-20Input: aiptek - remove redundant assignment to variable retColin Ian King1-2/+1
Variable ret is being assigned a value that is never read, it is being re-assigned again in either path of the if statement. The assignment is redundant and can be removed. Cleans up clang scan build warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220418142457.84708-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-19ARM: pxa: split up mach/hardware.hArnd Bergmann2-2/+1
The mach/hardware.h is included in lots of places, and it provides three different things on pxa: - the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup. linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-17Input: iqs7222 - avoid dereferencing a NULL pointerJeff LaBundy1-2/+3
Select callers of iqs7222_parse_props() do not expect a child node to be derived and returned via pointer. As such, these callers set **child_node to NULL. However, this pointer is dereferenced in all cases. To solve this problem, dereference the pointer only for cases that expect a child node in the first place. In these cases, the caller provides a valid pointer. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220417214132.497487-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-17Input: iqs7222 - propagate some error codes correctlyDan Carpenter1-16/+16
If fwnode_property_count_u32() returns a negative error code then, because of type promotion, the "count > ARRAY_SIZE(pins)" condition will be true. The negative "count" is type promoted to a high unsigned size_t value. That means the "else if (count < 0)" condition will always be false and we don't print that error message or propagate the error code from fwnode_property_count_u32() as intended. Fix this by re-ordering the checks so that we check for negative first. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220412153954.GA15406@kili Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 00:22:00 +0000