summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2014-12-17Merge branch 'for-linus' of ↵Linus Torvalds71-911/+4850
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Two new drivers for Elan hardware (for I2C touchpad and touchscreen found in several Chromebooks and other devices), a driver for Goodix touch panel, and small fixes to Cypress I2C trackpad and other input drivers. Also we switched to use __maybe_unused instead of gating suspend/ resume code with #ifdef guards to get better compile coverage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: gpio_keys - fix warning regarding uninitialized 'button' variable Input: add support for Elan eKTH I2C touchscreens Input: gpio_keys - fix warning regarding uninitialized 'irq' variable Input: cyapa - use 'error' for error codes Input: cyapa - fix resuming the device Input: gpio_keys - add device tree support for interrupt only keys Input: amikbd - allocate temporary keymap buffer on the stack Input: amikbd - fix build if !CONFIG_HW_CONSOLE Input: lm8323 - missing error check in lm8323_set_disable() Input: initialize device counter variables with -1 Input: initialize input_no to -1 to avoid subtraction Input: i8042 - do not try to load on Intel NUC D54250WYK Input: atkbd - correct MSC_SCAN events for force_release keys Input: cyapa - switch to using managed resources Input: lifebook - use "static inline" instead of "inline" in lifebook.h Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume Input: mouse - use __maybe_unused instead of ifdef around suspend/resume Input: misc - use __maybe_unused instead of ifdef around suspend/resume Input: cap11xx - support for irq-active-high option Input: cap11xx - add support for various cap11xx devices ...
2014-12-15Merge branch 'next' into for-linusDmitry Torokhov71-911/+4850
Prepare input updates for 3.19.
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds95-96/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-14Input: gpio_keys - fix warning regarding uninitialized 'button' variableFabio Estevam1-2/+3
Commit af906faabcf91eb1 ("Input: gpio_keys - fix warning regarding uninitialized 'irq' variable") introduced the following build warning: drivers/input/keyboard/gpio_keys.c:625:16: warning: 'button' may be used uninitialized in this function [-Wmaybe-uninitialized] Move the 'button' initialization to a proper location to avoid such warning. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-08Merge branch 'pm-runtime'Rafael J. Wysocki2-2/+2
* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
2014-12-08Merge branch 'device-properties'Rafael J. Wysocki1-61/+51
* device-properties: leds: leds-gpio: Fix multiple instances registration without 'label' property leds: leds-gpio: Fix legacy GPIO number case ACPI / property: Drop size_prop from acpi_dev_get_property_reference() leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors ACPI / GPIO: Document ACPI GPIO mappings API net: rfkill: gpio: Add default GPIO driver mappings for ACPI ACPI / GPIO: Driver GPIO mappings for ACPI GPIOs input: gpio_keys_polled: Make use of device property API leds: leds-gpio: Make use of device property API gpio: Support for unified device properties interface Driver core: Unified interface for firmware node properties input: gpio_keys_polled: Add support for GPIO descriptors leds: leds-gpio: Add support for GPIO descriptors gpio: sch: Consolidate core and resume banks gpio / ACPI: Add support for _DSD device properties misc: at25: Make use of device property API ACPI: Allow drivers to match using Device Tree compatible property Driver core: Unified device properties interface for platform firmware ACPI: Add support for device specific properties
2014-12-07Input: add support for Elan eKTH I2C touchscreensScott Liu3-0/+1284
This driver supports Elan eKTH I2C touchscreen controllers. Note that these are using custom protocol, as opposed to other Elan parts that use HID-over-I2C and are supported by the standard HID-multitouch driver. Signed-off-by: Scott Liu <scott.liu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-07Input: gpio_keys - fix warning regarding uninitialized 'irq' variableDmitry Torokhov1-4/+2
Commit f2d347ff70be453e ("Input: gpio_keys - add device tree support for interrupt only keys") caused the following build warning: drivers/input/keyboard/gpio_keys.c: In function 'gpio_keys_probe': drivers/input/keyboard/gpio_keys.c:647:15: warning: 'irq' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/input/keyboard/gpio_keys.c:622:7: note: 'irq' was declared here Move button->irq initialization into proper branch and get rid of the temporary. Reported-by: Olof's autobuilder <build@lixom.net> Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-05input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki2-2/+2
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. The alternative of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME may be replaced with CONFIG_PM too. Make these changes in 2 files under drivers/input/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Ferruh Yigit <fery@cypress.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-04Input: cyapa - use 'error' for error codesDudley Du1-47/+47
Let's use 'error' variable instead of 'ret' when we need to store erro codes. Signed-off-by: Dudley Du <dudley.dulixin@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03Input: cyapa - fix resuming the deviceDudley Du1-4/+3
Chage b1cfa7b4388285c0f0b486f152ab0cb18612c779 tried to get away form using irq in cyapa structure and use client->irq instead, but missed a couple of spots making the touchpad inoperative after resume. Reported-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Dudley Du <dudley.dulixin@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03Input: gpio_keys - add device tree support for interrupt only keysAlexander Stein1-14/+20
This features already exists for board config setups. Add support for device tree based systems. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03Input: amikbd - allocate temporary keymap buffer on the stackGeert Uytterhoeven1-1/+2
Allocate the temporary buffer needed for initialization of the console keyboard maps (512 bytes, as NR_KEYS = 256) on the stack instead of statically, to reduce kernel size. add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-512 (-512) function old new delta temp_map 512 - -512 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03Input: amikbd - fix build if !CONFIG_HW_CONSOLEGeert Uytterhoeven1-17/+29
If CONFIG_HW_CONSOLE is not set: drivers/built-in.o: In function `amikbd_probe': amikbd.c:(.init.text+0x3e4e): undefined reference to `key_maps' amikbd.c:(.init.text+0x3dd4): undefined reference to `key_maps' To fix this, extract the initialization of the console keyboard maps into amikbd_init_console_keymaps(), protected by #ifdef CONFIG_HW_CONSOLE. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03Input: lm8323 - missing error check in lm8323_set_disable()Dan Carpenter1-0/+2
The missing error handling here is not especially harmful but static checkers complain that "i" can be used uninitialized. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03Input: initialize device counter variables with -1Aniroop Mathur5-12/+12
Let's initialize atomic_t variables keeping track of number of various devices created so far with -1 in order to avoid extra subtraction operation. Signed-off-by: Aniroop Mathur <aniroop.mathur@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03drivers/input/evdev.c: don't kfree() a vmalloc addressAndrew Morton1-1/+1
If kzalloc() failed and then evdev_open_device() fails, evdev_open() will pass a vmalloc'ed pointer to kfree. This might fix https://bugzilla.kernel.org/show_bug.cgi?id=88401, where there was a crash in kfree(). Reported-by: Christian Casteyde <casteyde.christian@free.fr> Belatedly-Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-02Input: initialize input_no to -1 to avoid subtractionAniroop Mathur1-2/+2
Let's initializes input_no to -1 in order to avoid extra subtraction operation performed every time we allocate an input device. Signed-off-by: Aniroop Mathur <aniroop.mathur@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-02Input: i8042 - do not try to load on Intel NUC D54250WYKTodor Minchev1-0/+10
The Intel NUC D54250WYK has no PS/2 controller, however the DSDT declares PS/2 devices which trigger the loading of the i8042 driver. Signed-off-by: Todor Minchev <todor.minchev@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-27Merge branch 'for-linus' of ↵Linus Torvalds3-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "The main change is to fix breakage in Elantech driver introduced by the recent commit adding trackpoint reporting to protocol v4. Now we are trusting the hardware to advertise the trackpoint properly and do not try to decode the data as trackpoint if firmware told us it is not present" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - use proper endpoint type Input: elantech - trust firmware about trackpoint presence Input: synaptics - adjust min/max on Thinkpad E540
2014-11-25Input: xpad - use proper endpoint typeGreg Kroah-Hartman1-3/+13
The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-25Input: elantech - trust firmware about trackpoint presenceDmitry Torokhov1-9/+1
Only try to parse data as coming from trackpoint if firmware told us that trackpoint is present. Fixes commit caeb0d37fa3e387eb0dd22e5d497523c002033d1 Reported-and-tested-by: Marcus Overhagen <marcus.overhagen@gmail.com> Reported-and-tested-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-16Input: atkbd - correct MSC_SCAN events for force_release keysStefan Brüns1-2/+4
Without the change either no scancode would be reported on release of force_release keys, or - if the key is marked as force_release erroneously - the release event and the scancode would be reported in separate reports to the input layer. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-16Input: synaptics - adjust min/max on Thinkpad E540Ben Sagal1-0/+4
The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Cc: stable@vger.kernel.org Signed-off-by: Binyamin Sagal <bensagal@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-14Merge branch 'for-linus' of ↵Linus Torvalds4-7/+83
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Mostly small fixups to PS/2 tochpad drivers (ALPS, Elantech, Synaptics) to better deal with specific hardware" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - update the documentation Input: elantech - provide a sysfs knob for crc_enabled Input: elantech - report the middle button of the touchpad Input: alps - ignore bad data on Dell Latitudes E6440 and E7440 Input: alps - allow up to 2 invalid packets without resetting device Input: alps - ignore potential bare packets when device is out of sync Input: elantech - fix crc_enabled for Fujitsu H730 Input: elantech - use elantech_report_trackpoint for hardware v4 too Input: twl4030-pwrbutton - ensure a wakeup event is recorded. Input: synaptics - add min/max quirk for Lenovo T440s
2014-11-13Input: elantech - provide a sysfs knob for crc_enabledUlrik De Bie1-0/+2
The detection of crc_enabled is known to fail for Fujitsu H730. A DMI blacklist is added for that, but it can be expected that other laptops will pop up with this. Here a sysfs knob is provided to alter the behaviour of crc_enabled. Writing 0 or 1 to it sets the variable to 0 or 1. Reading it will show the crc_enabled variable (0 or 1). Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - report the middle button of the touchpadUlrik De Bie1-0/+19
In the past, no elantech was known with 3 touchpad mouse buttons. Fujitsu H730 is the first known elantech with a middle button. This commit enables this middle button. For backwards compatibility, the Fujitsu is detected via DMI, and only for this one 3 buttons will be announced. Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: alps - ignore bad data on Dell Latitudes E6440 and E7440Pali Rohár1-1/+16
Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-09Input: cyapa - switch to using managed resourcesDudley Du1-79/+105
Use of managed resources simplifies error handling and device removal code. Signed-off-by: Dudley Du <dudl@cypress.com> [Dmitry: added open/close methods so cyapa_remove is no longer needed.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-09Input: lifebook - use "static inline" instead of "inline" in lifebook.hChen Gang1-3/+3
For functions defined in header files we should use static inline rather than inline, which breaks under the latest upstream gcc (which is really gcc issue, but static inline is better suited regardless). The related error (with allmodconfig under tile): MODPOST 4002 modules ERROR: "lifebook_detect" [drivers/input/mouse/psmouse.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-09Input: alps - allow up to 2 invalid packets without resetting devicePali Rohár1-0/+3
On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte in 6 bytes ALPS packet. In this case psmouse driver enter out of sync state. It looks like that all other bytes in packets are valid and also device working properly. So there is no need to do full device reset, just need to wait for byte which match condition for first byte (start of packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is small. This patch increase number of invalid bytes to size of 2 ALPS packets which psmouse driver can drop before do full reset. Resetting ALPS devices take some time and when doing reset on some Dell laptops touchpad, trackstick and also keyboard do not respond. So it is better to do it only if really necessary. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: alps - ignore potential bare packets when device is out of syncPali Rohár1-1/+7
5th and 6th byte of ALPS trackstick V3 protocol match condition for first byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS trackstick is sending data then driver match 5th, 6th and next 1st bytes as PS/2. It basically means if user is using trackstick when driver is in out of sync state driver will never resync. Processing these bytes as 3 bytes PS/2 data cause total mess (random cursor movements, random clicks) and make trackstick unusable until psmouse driver decide to do full device reset. Lot of users reported problems with ALPS devices on Dell Latitude E6440, E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like that i8042 and psmouse/alps driver always receive group of 6 bytes packets so there are no missing bytes and no bytes were inserted between valid ones. This patch does not fix root of problem with ALPS devices found in Dell Latitude laptops but it does not allow to process some (invalid) subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of sync. So with this patch trackstick input device does not report bogus data when also driver is out of sync, so trackstick should be usable on those machines. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - fix crc_enabled for Fujitsu H730Ulrik De Bie1-1/+18
The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - use elantech_report_trackpoint for hardware v4 tooUlrik De Bie1-2/+14
The Fujitsu H730 has hardware v4 with a trackpoint. This enables the elantech_report_trackpoint for v4. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: twl4030-pwrbutton - ensure a wakeup event is recorded.NeilBrown1-0/+1
This button is treated as a wakeup source, so we need to initialise it correctly. Without the device_init_wakeup() call, dev->power.wakeup will be NULL, and pm_wakeup_event() will do nothing. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-06Input: synaptics - add min/max quirk for Lenovo T440sTakashi Iwai1-2/+3
The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748 Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-04input: gpio_keys_polled: Make use of device property APIAaron Lu1-49/+24
Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04input: gpio_keys_polled: Add support for GPIO descriptorsAaron Lu1-12/+27
GPIO descriptors are the preferred way over legacy GPIO numbers nowadays. Convert the driver to use GPIO descriptors internally but still allow passing legacy GPIO numbers from platform data to support existing platforms. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman95-96/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-02Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resumeJingoo Han19-78/+38
Use __maybe_unused instead of ifdef guards around suspend/resume functions, in order to increase build coverage and fix build warnings. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02Input: mouse - use __maybe_unused instead of ifdef around suspend/resumeJingoo Han3-12/+6
Use __maybe_unused instead of ifdef guards around suspend/resume functions, in order to increase build coverage and fix build warnings. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02Input: misc - use __maybe_unused instead of ifdef around suspend/resumeJingoo Han19-71/+35
Use __maybe_unused instead of ifdef guards around suspend/resume functions, in order to increase build coverage and fix build warnings. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02Input: cap11xx - support for irq-active-high optionMatt Ranostay1-0/+8
Some applications need to use the irq-active-high push-pull option. This allows it be enabled in the device tree child node. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02Input: cap11xx - add support for various cap11xx devicesMatt Ranostay1-23/+51
There are variants of the cap11xx device with a varying number of capacitance detection channels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02Input: rename cap1106 driver to cap11xxMatt Ranostay4-346/+345
There are several devices in cap11xx family besides cap1106. The driver can be made to support all of them, so let's give it more generic name. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Merge branch 'for-linus' of ↵Linus Torvalds11-28/+301
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
2014-10-31Input: altera_ps2 - switch to using managed resourcesTobias Klauser1-57/+24
Use them devm_ managed resources API to simplify error handling in altera_ps2_probe() and to reduce the size of altera_ps2_remove() and the ps2if struct. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Input: add driver for the Goodix touchpanelBastien Nocera3-0/+409
Add a driver for the Goodix touchscreen panel found in Onda v975w tablets. The driver is based off the Android driver gt9xx.c found in some Android code dumps, but now bears no resemblance to the original driver. The driver was tested on the aforementioned tablet. Signed-off-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Revert "Input: i8042 - disable active multiplexing by default"Dmitry Torokhov2-9/+274
This reverts commit 68da166491655bc54051bf04c78ce648e2e33508. It turns out that the assertion about scope of regressions due to always keeping keyboard controller in legacy mode was proven wrong. There are laptops, such as Clevo W650SH, that only have internal touchpad (no external PS/2 ports), that require active multiplexing mode to switch the touchpad (Elantech) into native mode instead of basic PS/2 emulation. Reported-by: Roel Aaij <roel.aaij@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Input: altera_ps2 - use correct type for irq return valueTobias Klauser1-1/+1
The irq function altera_ps2_rxint returns an irqreturn_t, so use the same type for variable storing the return value. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 03:33:44 +0000