summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2022-03-30Merge branch 'next' into for-linusDmitry Torokhov23-182/+976
Prepare input updates for 5.18 merge window.
2022-03-20Input: adi - remove redundant variable zColin Ian King1-2/+2
Variable z is being assigned a value that is never read, the variable is redundant and can be removed. Cleans up clang scan build warning: drivers/input/joystick/adi.c:139:6: warning: Although the value stored to 'z' is used in the enclosing expression, the value is never actually read from 'z' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220318002318.80519-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-20Input: add Imagis touchscreen driverMarkuss Broks3-0/+378
Add support for the IST3038C touchscreen IC from Imagis, based on downstream driver. The driver supports multi-touch (10 touch points) The IST3038C IC supports touch keys, but the support isn't added because the touch screen used for testing doesn't utilize touch keys. Looking at the downstream driver, it is possible to add support for other Imagis ICs of IST30**C series. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20220305165330.13061-3-markuss.broks@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-20Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMDMatthew Haughton1-0/+1
Confirmed LEN2064 on my P14s works with psmouse.synaptics_intertouch=1 By all accounts T14 and P14s are the same hardware which only differ by model identifier. Signed-off-by: Matthew Haughton <snafu109@gmail.com> Link: https://lore.kernel.org/r/20220318113949.32722-1-snafu109@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-20Input: stmfts - fix reference leak in stmfts_input_openZheng Yongjun1-3/+5
pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put_noidle will result in reference leak in stmfts_input_open, so we should fix it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-20Input: add bounds checking to input_set_capability()Jeff LaBundy1-0/+19
Update input_set_capability() to prevent kernel panic in case the event code exceeds the bitmap for the given event type. Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com> Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-20Input: iqs5xx - use local input_dev pointerJeff LaBundy1-8/+8
Both iqs5xx_axis_init() and iqs5xx_irq() already define a local input_dev pointer 'input'. Use this instead of iqs5xx->input so as to make the code a bit smaller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220320025707.404544-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-14Input: extract ChromeOS vivaldi physmap show functionStephen Boyd6-46/+73
Let's introduce a common library file for the physmap show function duplicated between three different keyboard drivers. This largely copies the code from cros_ec_keyb.c which has the most recent version of the show function, while using the vivaldi_data struct from the hid-vivaldi driver. This saves a small amount of space in an allyesconfig build. $ ./scripts/bloat-o-meter vmlinux.before vmlinux.after add/remove: 3/0 grow/shrink: 2/3 up/down: 412/-720 (-308) Function old new delta vivaldi_function_row_physmap_show - 292 +292 _sub_I_65535_1 1057564 1057616 +52 _sub_D_65535_0 1057564 1057616 +52 e843419@49f2_00062737_9b04 - 8 +8 e843419@20f6_0002a34d_35bc - 8 +8 atkbd_parse_fwnode_data 480 472 -8 atkbd_do_show_function_row_physmap 316 76 -240 function_row_physmap_show 620 148 -472 Total: Before=285581925, After=285581617, chg -0.00% Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler Link: https://lore.kernel.org/r/20220228075446.466016-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-14Merge tag 'v5.17-rc8' into nextDmitry Torokhov6-59/+69
Sync up with mainline to again get the latest changes in HID subsystem.
2022-03-14Input: aiptek - properly check endpoint typePavel Skripkin1-6/+4
Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints") Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-14Input: mt6779-keypad - fix signedness bugLv Ruyi (CGEL ZTE)1-1/+1
The irq variable is defined as unsigned int. If the platform_get_irq() returns a negative value, data type cast may result in error. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi (CGEL ZTE) <lv.ruyi@zte.com.cn> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220308025054.2077162-1-lv.ruyi@zte.com.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-07Input: zinitix - do not report shadow fingersLinus Walleij1-9/+35
I observed the following problem with the BT404 touch pad running the Phosh UI: When e.g. typing on the virtual keyboard pressing "g" would produce "ggg". After some analysis it turns out the firmware reports that three fingers hit that coordinate at the same time, finger 0, 2 and 4 (of the five available 0,1,2,3,4). DOWN Zinitix-TS 3-0020: finger 0 down (246, 395) Zinitix-TS 3-0020: finger 1 up (0, 0) Zinitix-TS 3-0020: finger 2 down (246, 395) Zinitix-TS 3-0020: finger 3 up (0, 0) Zinitix-TS 3-0020: finger 4 down (246, 395) UP Zinitix-TS 3-0020: finger 0 up (246, 395) Zinitix-TS 3-0020: finger 2 up (246, 395) Zinitix-TS 3-0020: finger 4 up (246, 395) This is one touch and release: i.e. this is all reported on touch (down) and release. There is a field in the struct touch_event called finger_cnt which is actually a bitmask of the fingers active in the event. Rename this field finger_mask as this matches the use contents better, then use for_each_set_bit() to iterate over just the fingers that are actally active. Factor out a finger reporting function zinitix_report_fingers() to handle all fingers. Also be more careful in reporting finger down/up: we were reporting every event with input_mt_report_slot_state(..., true); but this should only be reported on finger down or move, not on finger up, so also add code to check p->sub_status to see what is happening and report correctly. After this my Zinitix BT404 touchscreen report fingers flawlessly. The vendor drive I have notably does not use the "finger_cnt" and contains obviously incorrect code like this: if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM) touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM; As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is a bitmask this seems quite confused. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220228233017.2270599-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-05Input: mt6779-keypad - add MediaTek keypad driverfengping.yu3-0/+234
This patch adds matrix keypad support for Mediatek SoCs. Signed-off-by: fengping.yu <fengping.yu@mediatek.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220303154302.252041-3-mkorpershoek@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-01Input: elan_i2c - fix regulator enable count imbalance after suspend/resumeHans de Goede1-7/+7
Before these changes elan_suspend() would only disable the regulator when device_may_wakeup() returns false; whereas elan_resume() would unconditionally enable it, leading to an enable count imbalance when device_may_wakeup() returns true. This triggers the "WARN_ON(regulator->enable_count)" in regulator_put() when the elan_i2c driver gets unbound, this happens e.g. with the hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1. Fix this by making the regulator_enable() call also be conditional on device_may_wakeup() returning false. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-01Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()Hans de Goede1-40/+22
elan_disable_power() is called conditionally on suspend, where as elan_enable_power() is always called on resume. This leads to an imbalance in the regulator's enable count. Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power() in preparation of fixing this. No functional changes intended. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com [dtor: consolidate elan_[en|dis]able() into elan_set_power()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: da9063 - use devm_delayed_work_autocancel()Christophe JAILLET1-10/+3
Use devm_delayed_work_autocancel() instead of hand-writing it. This saves a few lines of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/a76ac3f4c7aee205395b89b5b3f587e30a48df96.1645205312.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: goodix - fix race on driver unbindHans de Goede2-13/+23
Because there is no way to detect if the touchscreen has pen support, the driver is allocating and registering the input_pen input_dev on receiving the first pen event. But this means that the input_dev gets allocated after the request_irq() call which means that the devm framework will free it before disabling the irq, leaving a window where the irq handler may run and reference the free-ed input_dev. To fix this move the allocation of the input_pen input_dev to before the request_irq() call, while still only registering it on the first pen event so that the driver does not advertise pen capability on touchscreens without it (most goodix touchscreens do not have pen support). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131143539.109142-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: goodix - use input_copy_abs() helperHans de Goede1-17/+9
Use the new input_copy_abs() helper and move the 2 input_abs_set_res() calls up to be directly after the 2 input_copy_abs() calls, so that the calls initializing the X and Y axis are all together. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131143539.109142-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: add input_copy_abs() functionHans de Goede1-0/+36
Add a new helper function to copy absinfo from one input_dev to another input_dev. This is useful to e.g. setup a pen/stylus input-device for combined touchscreen/pen hardware where the pen uses the same coordinates as the touchscreen. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131143539.109142-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: set EV_ABS in dev->evbit even if input_alloc_absinfo() failsHans de Goede1-6/+3
The input core's error handling for input_alloc_absinfo() failures is based on ignoring the error until input_register_device() runs and then checks for the failure like this: if (test_bit(EV_ABS, dev->evbit) && !dev->absinfo) { dev_err(&dev->dev, ...); return -EINVAL; } This relies on EV_ABS actually getting set in dev->evbit even if input_alloc_absinfo() fails, change input_set_abs_params() and input_set_capability() to actually adhere to this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131143539.109142-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: goodix - workaround Cherry Trail devices with a bogus ACPI ↵Hans de Goede1-1/+15
Interrupt() resource ACPI/x86 devices with a Cherry Trail SoC should have a GpioInt + a regular GPIO ACPI resource in their ACPI tables. Some CHT devices have a bug, where the also is bogus interrupt resource (likely copied from a previous Bay Trail based generation of the device). The i2c-core-acpi code will assign the bogus, non-working, interrupt resource to client->irq. Add a workaround to fix this up. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2043960 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220228111613.363336-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: goodix - use the new soc_intel_is_byt() helperHans de Goede1-16/+2
Use the new soc_intel_is_byt() helper from linux/platform_data/x86/soc.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131143539.109142-5-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Merge tag 'v5.17-rc4' into for-linusDmitry Torokhov5-35/+22
Merge with mainline to get the Intel ASoC generic helpers header and other changes.
2022-02-27Input: samsung-keypad - properly state IOMEM dependencyDavid Gow1-1/+1
Make the samsung-keypad driver explicitly depend on CONFIG_HAS_IOMEM, as it calls devm_ioremap(). This prevents compile errors in some configs (e.g, allyesconfig/randconfig under UML): /usr/bin/ld: drivers/input/keyboard/samsung-keypad.o: in function `samsung_keypad_probe': samsung-keypad.c:(.text+0xc60): undefined reference to `devm_ioremap' Signed-off-by: David Gow <davidgow@google.com> Acked-by: anton ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20220225041727.1902850-1-davidgow@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-18Merge tag 'v5.17-rc4' into nextDmitry Torokhov2-12/+5
Sync up with mainline to get the latest changes in HID subsystem.
2022-02-18Input: psmouse - set up dependency between PS/2 and SMBus companionsDmitry Torokhov1-0/+10
When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we create SMBus companion devices that are attached to I2C/SMBus controllers. However, when suspending and resuming, we also need to make sure that we take into account the PS/2 device they are associated with, so that PS/2 device is suspended after the companion and resumed before it, otherwise companions will not work properly. Before I2C devices were marked for asynchronous suspend/resume, this ordering happened naturally, but now we need to enforce it by establishing device links, with PS/2 devices being suppliers and SMBus companions being consumers. Fixes: 172d931910e1 ("i2c: enable async suspend/resume on i2c client devices") Reported-and-tested-by: Hugh Dickins <hughd@google.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: tsc200x - add axis inversion and swapping supportYunus Bas1-3/+4
Since Commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes"), the of_touchscreen interface supports axis inverting and swapping through device tree properties. Make use of this feature. Signed-off-by: Yunus Bas <y.bas@phytec.de> Link: https://lore.kernel.org/r/20220209223933.1672782-1-y.bas@phytec.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: xbox - correct the name for Xbox Series S|X controllerMarcos Alano1-1/+1
Change the name of controller to a more meaningful one. Signed-off-by: Marcos Alano <marcoshalano@gmail.com> Link: https://lore.kernel.org/r/20220212191014.1754721-1-marcoshalano@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: ps2-gpio - enforce GPIOs flag open drainDanilo Krummrich1-2/+7
The PS/2 bus defines the data and clock line be open drain, therefore for both enforce the particular GPIO flags in the driver. Without enforcing to flag at least the clock gpio as open drain we run into the following warning: WARNING: CPU: 1 PID: 40 at drivers/gpio/gpiolib.c:3175 gpiochip_enable_irq+0x54/0x90 gpiochip_enable_irq() warns on a GPIO being configured as output while serving as IRQ source without being flagged as open drain. Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Link: https://lore.kernel.org/r/20220215180829.63543-4-danilokrummrich@dk-develop.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: ps2-gpio - don't send rx data before the stop bitDanilo Krummrich1-14/+8
Sending the data before processing the stop bit from the device already saves the data of the current xfer in case the stop bit is missed. However, when TX xfers are enabled this introduces a race condition when a peripheral driver using the bus immediately requests a TX xfer from IRQ context. Therefore the data must be send after receiving the stop bit, although it is possible the data is lost when missing the stop bit. Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Link: https://lore.kernel.org/r/20220215160208.34826-5-danilokrummrich@dk-develop.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: ps2-gpio - remove tx timeout from ps2_gpio_irq_tx()Danilo Krummrich1-9/+1
Actually, there's no extra clock pulse to wait for. The assumption of an extra clock pulse was mistakenly derived from the fact that by the time this driver was introduced the GPIO controller of the test machine (bcm2835) generated spurious interrupts. Since now spurious interrupts are handled properly this can and must be removed in order to make TX xfers work properly. While at it, remove duplicate gpiod_direction_input(). The data gpio must already be configured to act as input when receiving the ACK bit. This patch is tested with the original hardware (peripherals and board) the driver was developed on. Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Link: https://lore.kernel.org/r/20220215160208.34826-4-danilokrummrich@dk-develop.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: ps2-gpio - use ktime for IRQ timekeepingDanilo Krummrich1-20/+82
Using jiffies for the IRQ timekeeping is not sufficient for two reasons: (1) Usually jiffies have a resolution of 1ms to 10ms. The IRQ intervals based on the clock frequency of PS2 protocol specification (10kHz - 16.7kHz) are between ~60us and 100us only. Therefore only those IRQ intervals can be detected which are either at the end of a transfer or are overly delayed. While this is sufficient in most cases, since we have quite a lot of ways to detect faulty transfers, it can produce false positives in rare cases: When the jiffies value changes right between two interrupt that are in time, we wrongly assume that we missed one or more clock cycles. (2) Some gpio controllers (e.g. the one in the bcm283x chips) may generate spurious IRQs when processing interrupts in the frequency given by PS2 devices. Both issues can be fixed by using ktime resolution for IRQ timekeeping. However, it is still possible to miss clock cycles without detecting them. When the PS2 device generates the falling edge of the clock signal we have between ~30us and 50us to sample the data line, because after this time we reach the next rising edge at which the device changes the data signal already. But, the only thing we can detect is whether the IRQ interval is within the given period. Therefore it is possible to have an IRQ latency greater than ~30us to 50us, sample the wrong bit on the data line and still be on time with the next IRQ. However, this can only happen when within a given transfer the IRQ latency increases slowly. ___ ______ ______ ______ ___ \ / \ / \ / \ / \ / \ / \ / \ / \______/ \______/ \______/ \______/ |-----------------| |--------| 60us/100us 30us/50us Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Link: https://lore.kernel.org/r/20220215160208.34826-3-danilokrummrich@dk-develop.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: ps2-gpio - refactor struct ps2_gpio_dataDanilo Krummrich1-28/+32
Refactor struct ps2_gpio_data in order to clearly separate RX and TX state data. This change intends to increase code readability and does not bring any functional change. Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Link: https://lore.kernel.org/r/20220215160208.34826-2-danilokrummrich@dk-develop.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: zinitix - add new compatible stringsLinus Walleij1-0/+12
This driver works just fine with the BT404 version of the touchscreen as well. Tested on the Samsung GT-I8160 (Codina) mobile phone. Add all the new variants from the binding document so people can easily test them, we believe most of them work more or less. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220214234033.1052681-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-08Input: clear BTN_RIGHT/MIDDLE on buttonpadsJosé Expósito1-0/+6
Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit and the BTN_LEFT key bit. As explained in the specification, where a device has a button type value of 0 (click-pad) or 1 (pressure-pad) there should not be discrete buttons: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even though the device is a buttonpad and therefore does not have those buttons. This behavior has forced userspace applications like libinput to implement different workarounds and quirks to detect buttonpads and offer to the user the right set of features and configuration options. For more information: https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726 In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key bits when the input device is register if the INPUT_PROP_BUTTONPAD property bit is set. Notice that this change will not affect udev because it does not check for buttons. See systemd/src/udev/udev-builtin-input_id.c. List of known affected hardware: - Chuwi AeroBook Plus - Chuwi Gemibook - Framework Laptop - GPD Win Max - Huawei MateBook 2020 - Prestigio Smartbook 141 C2 - Purism Librem 14v1 - StarLite Mk II - AMI firmware - StarLite Mk II - Coreboot firmware - StarLite Mk III - AMI firmware - StarLite Mk III - Coreboot firmware - StarLabTop Mk IV - AMI firmware - StarLabTop Mk IV - Coreboot firmware - StarBook Mk V Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-07Input: mtk-pmic-keys - add support for MT6358Mattijs Korpershoek1-2/+46
MT6358 pmic keys behave differently than mt6397 and mt6323: there are two interrupts per key: one for press, the other one for release (_r) Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220121140323.4080640-4-mkorpershoek@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-07Input: mtk-pmic-keys - use get_irq_byname() instead of indexMattijs Korpershoek1-2/+5
Some pmics of the mt6397 family (such as MT6358), have two IRQs per physical key: one for press event, another for release event. The mtk-pmic-keys driver assumes that each key only has one IRQ. The key index and the RES_IRQ resource index have a 1/1 mapping. This won't work for MT6358, as we have multiple resources (2) for one key. To prepare mtk-pmic-keys to support MT6358, retrieve IRQs by name instead of by index. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220121140323.4080640-2-mkorpershoek@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-01Merge tag 'asoc-fix-v5.17-rc2' of ↵Takashi Iwai1-9/+3
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.17 Quite a few fixes here, including an unusually large set in the core spurred on by various testing efforts as well as the usual small driver fixes. There are quite a few fixes for out of bounds writes in both the core and the various Qualcomm drivers, plus a couple of fixes for locking in the DPCM code.
2022-01-31Input: wm97xx: Simplify resource managementChristophe JAILLET1-9/+3
Since the commit in the Fixes tag below, 'wm->input_dev' is a managed resource that doesn't need to be explicitly unregistered or freed (see devm_input_allocate_device() documentation) So, remove some unless line of code to slightly simplify it. Fixes: c72f61e74073 ("Input: wm97xx: split out touchscreen registering") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87dce7e80ea9b191843fa22415ca3aef5f3cc2e6.1643529968.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-17Merge tag 'v5.16' into nextDmitry Torokhov16-73/+186
Sync up with mainline to bring in the latest API changes.
2022-01-17Merge branch 'for-linus' of ↵Linus Torvalds12-85/+392
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Updates to Goodix touchscreen driver (addition of pen support) and Silead touchscreen driver (also addition of pen support and parsing of embedded firmware to determine screen size), along with assorted fixes for other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ti_am335x_tsc - fix a typo in a comment Input: zinitix - add compatible for bt532 Input: zinitix - handle proper supply names dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend Input: axp20x-pek - revert "always register interrupt handlers" change Input: gpio-keys - avoid clearing twice some memory Input: byd - fix typo in a comment Input: ucb1400_ts - remove redundant variable penup Input: ti_am335x_tsc - lower the X and Y sampling time Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2 Input: ti_am335x_tsc - set ADCREFM for X configuration Input: silead - add pen support Input: silead - add support for EFI-embedded fw using different min/max coordinates Input: goodix - 2 small fixes for pen support Input: goodix - improve gpiod_get() error logging Input: goodix - add pen support Input: ff-core - correct magnitude setting for rumble compatibility Input: palmas-pwrbutton - make a couple of arrays static const Input: wacom_i2c - clean up the query device fields Input: palmas-pwrbutton - use bitfield helpers
2022-01-15Merge branch 'next' into for-linusDmitry Torokhov22-153/+404
Prepare input updates for 5.17 merge window.
2022-01-12Merge tag 'tty-5.17-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
2022-01-10Input: ti_am335x_tsc - fix a typo in a commentQinghua Jin1-1/+1
change 'postion' to 'position' Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com> Link: https://lore.kernel.org/r/20220106084215.355295-1-qhjin.dev@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-09Merge branch 'for-linus' of ↵Linus Torvalds1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A small fixup to the Zinitix touchscreen driver to avoid enabling the IRQ line before we successfully requested it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: zinitix - make sure the IRQ is allocated before it gets enabled
2022-01-08Input: zinitix - add compatible for bt532Nikita Travkin1-0/+1
Zinitix BT532 is another touch controller that seem to implement the same interface as an already supported BT541. Add it to the driver. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-5-nikita@trvn.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-08Input: zinitix - handle proper supply namesLinus Walleij1-5/+16
The supply names of the Zinitix touchscreen were a bit confused, the new bindings rectifies this. To deal with old and new devicetrees, first check if we have "vddo" and in case that exists assume the old supply names. Else go and look for the new ones. We cannot just get the regulators since we would get an OK and a dummy regulator: we need to check explicitly for the old supply name. Use struct device *dev as a local variable instead of the I2C client since the device is what we are actually obtaining the resources from. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Slightly changed the legacy regulator detection] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-4-nikita@trvn.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-08Input: zinitix - make sure the IRQ is allocated before it gets enabledNikita Travkin1-9/+9
Since irq request is the last thing in the driver probe, it happens later than the input device registration. This means that there is a small time window where if the open method is called the driver will attempt to enable not yet available irq. Fix that by moving the irq request before the input device registration. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 26822652c85e ("Input: add zinitix touchscreen driver") Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-08Input: axp20x-pek - revert "always register interrupt handlers" changeHans de Goede1-37/+35
The power button on Cherry Trail systems with an AXP288 PMIC is connected to both the power button pin of the PMIC as well as to a power button GPIO on the Cherry Trail SoC itself. This leads to double power button event reporting which is a problem. Since reporting power button presses through the PMIC is not supported on all PMICs used on Cherry Trail systems, we want to keep the GPIO power button events, so the axp20x-pek code checks for the presence of a GPIO power button and in that case does not register its input-device. On most systems the GPIO power button also can wake-up the system from suspend, so the axp20x-pek driver would also not register its interrupt handler. But on some systems there was a bug causing wakeup by the GPIO power button handler to not work. Commit 9747070c11d6 ("Input: axp20x-pek - always register interrupt handlers") was added as a work around for this registering the axp20x-pek interrupts, but not the input-device on Cherry Trail systems. In the mean time the root-cause of the GPIO power button wakeup events not working has been found and fixed by the "pinctrl: cherryview: Do not allow the same interrupt line to be used by 2 pins" patch, so this is no longer necessary. This reverts the workaround going back to only registering the interrupt handlers on systems where we also register the input-device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20220106111647.66520-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-03Input: gpio-keys - avoid clearing twice some memoryChristophe JAILLET1-1/+1
bitmap_parselist() already clears the 'bits' bitmap, so there is no need to clear it when it is allocated. This just wastes some cycles. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/d6ee621b9dd75b92f8831db365cee58dc2025322.1640813136.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 01:30:43 +0000