summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2016-10-07Merge branch 'for-linus' of ↵Linus Torvalds26-478/+894
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "You will get - a new driver for Elan eKTF2127 touchscreen controllers - a new "gpio-decoder" driver to read and report state of several GPIO lines - an ADC resistor ladder driver - the ft6326 driver is removed because edt-ft5x06 handles the same devices just fine. .. plus the regular slew of driver fixes/enhancements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: elan_i2c - fix return tests of i2c_smbus_read_block_data() Input: ektf2127 - mark PM functions as __maybe_unused Input: snvs_pwrkey - drop input_free_device call if input_register_device fails Input: add support for Elan eKTF2127 touchscreen controller Input: serio - add hangup support Input: tps65218-pwrbutton - add support for tps65217 variant Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes Input: jornada720_kbd - remove unneeded mach/hardware.h include Input: focaltech - mark focaltech_set_resolution() static Input: wdt87xx_i2c - fix the flash erase issue Input: gpio-keys-polled - don't use unit-address with button nodes Input: add generic input driver to read encoded GPIO lines Input: add ADC resistor ladder driver Input: pegasus_notetaker - directly include workqueue header Input: elants_i2c - get product id on recovery mode for FW update Input: wm97xx - remove deprecated create_singletheread_workqueue Input: mc13783_ts - remove deprecated create_singletheread_workqueue Input: psmouse - remove deprecated create_singletheread_workqueue Input: jornada720_kbd - switch to using dev_dbg Input: jornada720_kbd - get rid of mach/irqs.h include ...
2016-10-07Merge tag 'mfd-for-linus-4.9' of ↵Linus Torvalds1-104/+31
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core framework: - Add the MFD bindings doc to MAINTAINERS New drivers: - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio New device support: - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x New functionality: - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 Fix-ups: - Clean-up defunct author emails (da9063, max14577) - Kconfig fixups (wm8350-i2c, as37220 - Constify (altera-a10sr, sm501) - Supply PCI IDs (intel-lpss-pci) - Improve clocking (qcom_rpm) - Fix IRQ probing (ucb1x00-core) - Ensure fault log is cleared (da9052) - Remove NO_IRQ check (ucb1x00-core) - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci) - Non standard declaration (tps65217, max8997-irq) - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi) - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core) - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona) Bugfixes: - Release OF pointer (qcom_rpm) - Avoid double shifting in suspend/resume (88pm80x) - Fix 'defined but not used' error (exynos-lpass) - Fix 'sleeping whilst attomic' (atmel-hlcdc)" * tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: arizona: Handle probe deferral for reset GPIO mfd: arizona: Remove arizona_of_get_named_gpio helper function mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config mfd: twl6040: Register child device for twl6040-pdmclk mfd: cros_ec_spi: Remove unused variable 'request' mfd: omap-usb-host: Return value is not 'const int' mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls mfd: ab8500-debugfs: Prevent initialised field from being over-written mfd: max8997-irq: 'inline' should be at the beginning of the declaration mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer mfd: tps65217: Fix nonstandard declaration mfd: lp873x: Remove unused mutex lock from struct lp873x mfd: atmel-hlcdc: Do not sleep in atomic context mfd: exynos-lpass: Mark PM functions as __maybe_unused mfd: intel-lpss: Add default I2C device properties for Apollo Lake mfd: twl-core: Make it explicitly non-modular mfd: sun6i-prcm: Make it explicitly non-modular mfd: smsc-ece1099: Make it explicitly non-modular ...
2016-10-03Merge tag 'char-misc-4.9-rc1' of ↵Linus Torvalds1-13/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the "big" char and misc driver update for 4.9-rc1. Lots of little things here, all over the driver tree for subsystems that flow through me. Nothing major that I can discern, full details are in the shortlog. All have been in the linux-next tree with no reported issues" * tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (144 commits) drivers/misc/hpilo: Changes to support new security states in iLO5 FW at25: fix debug and error messaging misc/genwqe: ensure zero initialization vme: fake: remove unexpected unlock in fake_master_set() vme: fake: mark symbols static where possible spmi: pmic-arb: Return an error code if sanity check fails Drivers: hv: get rid of id in struct vmbus_channel Drivers: hv: make VMBus bus ids persistent mcb: Add a dma_device to mcb_device mcb: Enable PCI bus mastering by default mei: stop the stall timer worker if not needed clk: probe common clock drivers earlier vme: fake: fix build for 64-bit dma_addr_t ttyprintk: Neaten and simplify printing mei: me: add kaby point device ids coresight: tmc: mark symbols static where possible coresight: perf: deal with error condition properly Drivers: hv: hv_util: Avoid dynamic allocation in time synch fpga manager: Add hardware dependency to Zynq driver Drivers: hv: utils: Support TimeSync version 4.0 protocol samples. ...
2016-10-03Merge branch 'next' into for-linusDmitry Torokhov26-478/+894
Prepare first round of input updates for 4.9 merge window.
2016-10-03Input: elan_i2c - fix return tests of i2c_smbus_read_block_data()Benjamin Tissoires1-8/+12
i2c_smbus_read_block_data() returns negative errno else the number of data bytes in the slave's response. Checking for error not null means the function always fails if the device answers properly. So given that we read 3 bytes and access those, better check that we actually read those 3 bytes. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-03Input: ektf2127 - mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
The newly added ektf2127 driver uses the SIMPLE_DEV_PM_OPS macro to conditionally refer to the resume/suspend functions, which causes a warning when CONFIG_PM_SLEEP is disabled: drivers/input/touchscreen/ektf2127.c:168:12: error: 'ektf2127_resume' defined but not used [-Werror=unused-function] drivers/input/touchscreen/ektf2127.c:156:12: error: 'ektf2127_suspend' defined but not used [-Werror=unused-function] We could either put these functions inside of an #ifdef or add __maybe_unused annotations. This uses the second approach, which is generally more foolproof. Fixes: 9ca5bf5029b6 ("Input: add support for Elan eKTF2127 touchscreen controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-30Merge branch 'for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "One small change to make joydev (which is used by older games) to bind to devices that export Z axis but not X or Y (such as TRC rudder)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - recognize devices with Z axis as joysticks
2016-09-26Input: joydev - recognize devices with Z axis as joysticksVille Ranki1-0/+6
Current implementation of joydev's input_device_id table recognizes only devices with ABS_X, ABS_WHEEL or ABS_THROTTLE axes as joysticks. There are joystick devices that do not have those axes, for example TRC Rudder device. The device in question has ABS_Z, ABS_RX and ABS_RY axes causing it not being detected as joystick. This patch adds ABS_Z to the input_device_id list allowing devices with ABS_Z axis to be detected correctly. Signed-off-by: Ville Ranki <ville.ranki@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26Input: snvs_pwrkey - drop input_free_device call if input_register_device failsAxel Lin1-1/+0
Current code uses devm_input_allocate_device() so don't explicitly call input_free_device if input_register_device fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26Input: add support for Elan eKTF2127 touchscreen controllerSiebren Vroegindeweij3-0/+349
This adds a driver for the Elan eKTF2127 touchscreen controller, which speaks an i2c protocol which is distinctly different from the already supported eKTH controllers. Signed-off-by: Michel Verlaan <michel.verl@gmail.com> Signed-off-by: Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-23Merge branch 'for-linus' of ↵Linus Torvalds1-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just a fix up for the firmware handling to the Silead driver (which is a new driver in this release)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead_gsl1680 - use "silead/" prefix for firmware loading Input: silead_gsl1680 - document firmware-name, fix implementation
2016-09-21Input: serio - add hangup supportHans Verkuil1-3/+14
The Pulse-Eight USB CEC adapter is a usb device that shows up as a ttyACM0 device. It requires that you run inputattach in order to communicate with it via serio. This all works well, but it would be nice to have a udev rule to automatically start inputattach. That too works OK, but the problem comes when the USB device is unplugged: the tty hangup is never handled by the serio framework so the inputattach utility never exits and you have to kill it manually. By adding this hangup callback the inputattach utility now properly exits as soon as the USB device is unplugged. The udev rule I used on my Debian sid system is: SUBSYSTEM=="tty", KERNEL=="ttyACM[0-9]*", ATTRS{idVendor}=="2548", ATTRS{idProduct}=="1002", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}+="pulse8-cec-inputattach@%k.service" And /etc/systemd/system/pulse8-cec-inputattach@.service is as follows: =============================================================== [Unit] Description=inputattach for pulse8-cec device on %I [Service] Type=simple ExecStart=/usr/local/bin/inputattach --pulse8-cec /dev/%I KillMode=process =============================================================== Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Input: silead_gsl1680 - use "silead/" prefix for firmware loadingHans de Goede1-5/+6
The silead touch-controller ICs use a different firmware per digitizer / tablet model. So there are going to be quite a few of then and they really should be under a separate subdir. This commit prefixes the default firmware names with "silead/" just like we are already doing for devicetree specified firmware names. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Input: silead_gsl1680 - document firmware-name, fix implementationHans de Goede1-2/+3
The driver has supported touchscreen-fw-name to specify the firmware to load since it has been merged, but this was omitted from the dt-binding documentation. During review of adding touchscreen-fw-name to the binding documentation it was brought up that there is a standard property name called "firmware-name" for this, which should be used. Since there are no users of touchscreen-fw-name yet, this commit adds documentation of "firmware-name" to the dt-binding documentation and switches the driver over to use this. This commit also makes the driver add a "silead/" prefix to the firmware name from dt before calling request_firmware. That the firmware files are stored under /lib/firmware/silead under Linux is an implementation detail and does not belong in devicetree. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Input: tps65218-pwrbutton - add support for tps65217 variantMarcin Niestroj2-29/+67
The power button found in tps65217 device is very similar to the tps65218, so let's enhance the driver to support both variants. This driver enables us to use tps65217's power button as KEY_POWER on am335x boards (directly connected button in chiliboard, accessible pin via expansion header in beaglebone). This patch has been tested with chiliboard. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includesRussell King1-7/+14
Switch the jornada720 touchscreen driver to obtain its gpio from the platform device via gpiolib and derive the interrupt from the GPIO, rather than via a hard-coded interrupt number obtained from the mach/irqs.h and mach/hardware.h headers. Tested-by: Adam Wysocki <armlinux@chmurka.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Input: jornada720_kbd - remove unneeded mach/hardware.h includeRussell King1-1/+0
The Jornada720 keyboard driver does not make use of anything from the mach/hardware.h header, so this header can be removed. Tested-by: Adam Wysocki <armlinux@chmurka.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-05Input: focaltech - mark focaltech_set_resolution() staticBaoyou Xie1-1/+2
We get 1 warning when building kernel with W=1: drivers/input/mouse/focaltech.c:393:6: warning: no previous prototype for 'focaltech_set_resolution' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-05Input: wdt87xx_i2c - fix the flash erase issueHungNien Chen1-2/+3
The spec says that flash erase time is 30ms typical/200ms max, so let's replace current 50ms wait with 200ms to avoid potential failures. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-05Merge 4.8-rc5 into char-misc-nextGreg Kroah-Hartman5-4/+5
We want the fixes in here for merging and testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31miscdevice: Add helper macro for misc device boilerplatePrasannaKumar Muralidharan1-13/+2
Many modules call misc_register and misc_deregister in its module init and exit methods without any additional code. This ends up being boilerplate. This patch adds helper macro module_misc_device(), that replaces module_init()/ module_exit() with template functions. This patch also converts drivers to use new macro. Change since v1: Add device.h include in miscdevice.h as module_driver macro was not available from other include files in some architectures. Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31Input: cros_ec_keyb: Stop handling interrupts directlyVic Yang1-104/+31
Because events other that keyboard ones will be handled by now on by other drivers, stop directly handling interrupts and instead listen to the new notifier in the MFD driver. Signed-off-by: Vic Yang <victoryang@google.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-29Input: add generic input driver to read encoded GPIO linesVignesh R3-0/+150
Add a driver to read group of GPIO lines and provide its status as a numerical value as input event to the system. This will help in interfacing devices, that can be connected over GPIOs, that provide input to the system by driving GPIO lines connected to them like a rotary dial or a switch. For example, a rotary switch can be connected to four GPIO lines. The status of the GPIO lines reflect the actual position of the rotary switch dial. For example, if dial points to 9, then the four GPIO lines connected to the switch will read HLLH(0b'1001 = 9). This value can be reported as an ABS_* event to the input subsystem. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-29Input: add ADC resistor ladder driverAlexandre Belloni3-0/+226
A common way of multiplexing buttons on a single input in cheap devices is to use a resistor ladder on an ADC. This driver supports that configuration by polling an ADC channel provided by IIO. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-26Merge branch 'for-linus' of ↵Linus Torvalds5-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Simply small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove redundant regulator_disable call Input: synaptics-rmi4 - fix register descriptor subpacket map construction Input: tegra-kbc - fix inverted reset logic Input: silead - use devm_gpiod_get Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
2016-08-25Input: pegasus_notetaker - directly include workqueue headerMartin Kepplinger1-0/+1
According to the kernel's guidelines, let's directly include the workqueue functions we use. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-25Input: elants_i2c - get product id on recovery mode for FW updateJohnny Chuang1-11/+20
We use hw version to construct name of file holding touchscreen firmware, so let's try reading it even if touchscreen initialization fails (the firmware supports reading product/hardware id even when device is in recovery/boot mode). Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-25Input: wm97xx - remove deprecated create_singletheread_workqueueBhaktipriya Shridhar1-1/+1
alloc_ordered_workqueue() replaces deprecated create_singlethread_workqueue(). It queues work items via &wm->ts_reader and &wm->pen_event_work which map to wm97xx_pen_irq_worker (handles a pen down interrupt) and wm97xx_ts_reader (the touchscreen sample reader) respectively. Hence, an ordered dedicated workqueue has been used. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-25Input: mc13783_ts - remove deprecated create_singletheread_workqueueBhaktipriya Shridhar1-17/+7
The workqueue "workqueue" has a single workitem(&priv->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Workitem is sync cancelled in mc13783_ts_remove() to ensure that there are no workitems pending when the driver is disconnected. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-25Input: psmouse - remove deprecated create_singletheread_workqueueBhaktipriya Shridhar1-1/+1
alloc_ordered_workqueue() replaces the deprecated create_singlethread_workqueue(). There are multiple work items on the work queue viz &priv->dev3_register_work, &priv->recalib_wq, &psmouse->resync_work, which require execution ordering. Hence, an ordered workqueue has been used. The workqueue is not being used on a memory reclaim path. Hence, WQ_MEM_RECLAIM has not been set. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: jornada720_kbd - switch to using dev_dbgDmitry Torokhov1-4/+2
Switch to using dev_dbg instead of naked printk so that output is uniform with the other driver messages in the kernel. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: jornada720_kbd - get rid of mach/irqs.h includeRussell King1-4/+7
Switch the jornada720 keyboard driver to obtain its interrupt from the platform device, rather than via a hard-coded interrupt number obtained from the mach/irqs.h header. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: jornada720_kbd - switch to devm_* APIsRussell King1-35/+8
Switch the jornada720_kbd driver to use the devm_* APIs. This is in preparation to removing the mach/irqs.h include from this driver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: max77693-haptic - change Krzysztof Kozlowski's email to kernel.orgKrzysztof Kozlowski1-2/+2
Change my email address to kernel.org instead of Samsung one for the purpose of any future contact. The copyrights remain untouched and are attributed to Samsung. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: pixcir_i2c_ts - remove a useless blank lineLABBE Corentin1-1/+0
This patch fix the following checkpatch report: Blank lines aren't necessary after an open brace Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: pixcir_i2c_ts - remove text about writing to Free Software FoundationLABBE Corentin1-4/+0
Checkpatch complains about the text suggesting writing to Free Software Foundation for GPLv2 license copy. This patch remove that text. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: pixcir_i2c_ts - simplify code with of_device_get_match_dataLABBE Corentin1-7/+1
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it is better to use a standard function for getting the match data. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: remove duplicate ft6236 driverHans de Goede4-340/+8
The new(ish) ft6236 simply re-implements the M09 protocol of the (much) older edt-ft5x06.c driver. This commit removes this duplicate driver and adds the i2c ids and dt compatible string to the edt-ft5x06.c driver to keep compatibility. This commit also adds the standard touchscreen properties as optional properties to the edt,ft5x06 binding, these were documented in the focaltech,ft6236 bindingi, but were missing from the edt,ft5x06 doc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: ads7846 - remove redundant regulator_disable callPetr Cvek1-1/+0
ADS7846 regulator is disabled twice in a row in ads7846_remove(). Valid one is in ads7846_disable(). Removing the ads7846 module causes warning about unbalanced disables. ... WARNING: CPU: 0 PID: 29269 at drivers/regulator/core.c:2251 _regulator_disable+0xf8/0x130 unbalanced disables for vads7846 CPU: 0 PID: 29269 Comm: rmmod Tainted: G D W 4.7.0+ #3 Hardware name: HTC Magician ... show_stack+0x10/0x14 __warn+0xd8/0x100 warn_slowpath_fmt+0x38/0x48 _regulator_disable+0xf8/0x130 regulator_disable+0x34/0x60 ads7846_remove+0x58/0xd4 [ads7846] spi_drv_remove+0x1c/0x34 __device_release_driver+0x84/0x114 driver_detach+0x8c/0x90 bus_remove_driver+0x5c/0xc8 SyS_delete_module+0x1a0/0x238 ret_fast_syscall+0x0/0x38 Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: synaptics-rmi4 - fix register descriptor subpacket map constructionAndrew Duggan1-1/+2
The map_offset variable is specific to the register and needs to be reset in the loop. Otherwise, subsequent register's subpacket maps will have their bits set at the wrong index. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Nitin Chaudhary <nitinchaudhary1289@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: tegra-kbc - fix inverted reset logicMasahiro Yamada1-1/+1
Commit fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: silead - use devm_gpiod_getHans de Goede1-1/+1
The silead code is using devm_foo for everything (and does not free any resources). Except that it is using gpiod_get instead of devm_gpiod_get (but is not freeing the gpio_desc), change this to use devm_gpiod_get so that the gpio will be properly released. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-19Input: i8042 - set up shared ps2_cmd_mutex for AUX portsDmitry Torokhov1-0/+1
The commit 4097461897df ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 4097461897df ("Input: i8042 - break load dependency ...") Reported-by: Bruno Wolff III <bruno@wolff.to> Tested-by: Bruno Wolff III <bruno@wolff.to> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-05Merge branch 'for-linus' of ↵Linus Torvalds13-59/+1151
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "Two new drivers for touchscreen controllers: - Silead touchscreen controllers - SiS 9200 family touchscreen controllers and a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead - remove some dead code Input: sis-i2c - select CONFIG_CRC_ITU_T Input: add driver for SiS 9200 family I2C touchscreen controllers Input: ili210x - fix permissions on "calibrate" attribute Input: elan_i2c - properly wake up touchpad on ASUS laptops Input: add driver for Silead touchscreens Input: elantech - fix debug dump of the current packet Input: rotary_encoder - support binary encoding of states Input: xpad - power off wireless 360 controllers on suspend Input: i8042 - break load dependency between atkbd/psmouse and i8042 Input: synaptics-rmi4 - do not check for NULL when calling of_node_put() Input: cros_ec_keyb - cleanup use of dev
2016-08-04Input: silead - remove some dead codeDan Carpenter1-3/+0
buf[0] is an unsigned char. touch_nr is an int. The test for negative here doesn't make sense so I have removed it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-04Input: sis-i2c - select CONFIG_CRC_ITU_TArnd Bergmann1-0/+1
The newly added sis_i2c driver fails to link without the CRC_ITU_T driver enabled: drivers/input/touchscreen/sis_i2c.o: In function `sis_ts_irq_handler': sis_i2c.c:(.text+0xc0): undefined reference to `crc_itu_t' This adds a Kconfig select statement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a485cb037fe6 ("Input: add driver for SiS 9200 family I2C touchscreen controllers") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-03Merge branch 'next' into for-linusDmitry Torokhov13-59/+1153
Prepare second round of input updates for 4.8 merge window.
2016-08-03Input: add driver for SiS 9200 family I2C touchscreen controllersMika Penttilä3-0/+426
This is a driver for SiS 9200 family touchscreen controllers using I2C bus. Signed-off-by: Mika Penttilä <mika.penttila@nextfour.com> Acked-by: Tammy Tseng <tammy_tseng@sis.com> Acked-by: Yuger Yu <yuger_yu@sis.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02Input: ili210x - fix permissions on "calibrate" attributeDmitry Torokhov1-1/+1
"calibrate" attribute does not provide "show" methods and thus we should not mark it as readable. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02Input: elan_i2c - properly wake up touchpad on ASUS laptopsKT Liao1-16/+63
Some ASUS laptops were shipped with touchpads that require to be woken up first, before trying to switch them into absolute reporting mode, otherwise touchpad would fail to work while flooding the logs with: elan_i2c i2c-ELAN1000:00: invalid report id data (1) Among affected devices are Asus E202SA, N552VW, X456UF, UX305CA, and others. We detect such devices by checking the IC type and product ID numbers and adjusting order of operations accordingly. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Reported-by: Chris Chiu <chiu@endlessm.com> Reported-by: Vlad Glagolev <stealth@vaygr.net> Tested-by: Vlad Glagolev <stealth@vaygr.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 08:17:33 +0000