summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2011-07-05input: pmic8xxx-pwrkey: Do not use mfd_get_data()Samuel Ortiz1-1/+2
mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-05input: pmic8xxx-keypad: Do not use mfd_get_data()Samuel Ortiz1-1/+2
mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-20Merge branch 'for-linus' of ↵Linus Torvalds5-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sh_keysc - 8x8 MODE_6 fix Input: omap-keypad - add missing input_sync() Input: evdev - try to wake up readers only if we have full packet Input: properly assign return value of clamp() macro.
2011-06-18Input: sh_keysc - 8x8 MODE_6 fixMagnus Damm1-1/+1
According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys. Bump up MAXKEYS to 64 too. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-18Input: omap-keypad - add missing input_sync()Janusz Krzysztofik1-0/+1
Otherwise the updated evdev driver (commit cdda911c34006f1089f3c87b1a1f, "Input: evdev - only signal polls on full packets") no longer works on top of omap-keypad. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-18Input: evdev - try to wake up readers only if we have full packetDmitry Torokhov1-1/+2
We should only wake waiters on the event device when we actually post an EV_SYN/SYN_REPORT to the queue. Otherwise we end up making waiting threads runnable only to go right back to sleep because the device still isn't readable. Reported-by: Jeffrey Brown <jeffbrown@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-04Revert "tty: make receive_buf() return the amout of bytes received"Linus Torvalds1-8/+2
This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41af6a: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41af6a. Milton Miller pointed out the 'unsigned int' issue. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Milton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26input: Add support for Qualcomm PMIC8XXX power keyTrilok Soni3-0/+243
Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26input: Add Qualcomm pm8xxx keypad controller driverTrilok Soni3-0/+811
Add Qualcomm PMIC8XXX based keypad controller driver supporting upto 18x8 matrix configuration. Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for twl4030 codec cells platform bitsSamuel Ortiz1-2/+1
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (26 commits) arch/tile: prefer "tilepro" as the name of the 32-bit architecture compat: include aio_abi.h for aio_context_t arch/tile: cleanups for tilegx compat mode arch/tile: allocate PCI IRQs later in boot arch/tile: support signal "exception-trace" hook arch/tile: use better definitions of xchg() and cmpxchg() include/linux/compat.h: coding-style fixes tile: add an RTC driver for the Tilera hypervisor arch/tile: finish enabling support for TILE-Gx 64-bit chip compat: fixes to allow working with tile arch arch/tile: update defconfig file to something more useful tile: do_hardwall_trap: do not play with task->sighand tile: replace mm->cpu_vm_mask with mm_cpumask() tile,mn10300: add device parameter to dma_cache_sync() audit: support the "standard" <asm-generic/unistd.h> arch/tile: clarify flush_buffer()/finv_buffer() function names arch/tile: kernel-related cleanups from removing static page size arch/tile: various header improvements for building drivers arch/tile: disable GX prefetcher during cache flush arch/tile: tolerate disabling CONFIG_BLK_DEV_INITRD ...
2011-05-25Input: properly assign return value of clamp() macro.Hans Petter Selasky2-3/+3
[dtor@mail.ru: added mousedev changes] Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-24Merge branch 'for-linus' of ↵Linus Torvalds28-328/+1791
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander Input: tsc2007 - add X, Y and Z fuzz factors to platform data Input: tsc2007 - add poll_period parameter to platform data Input: tsc2007 - add poll_delay parameter to platform data Input: tsc2007 - add max_rt parameter to platform data Input: tsc2007 - debounce pressure measurement Input: ad714x - fix captouch wheel option algorithm Input: ad714x - allow platform code to specify irqflags Input: ad714x - fix threshold and completion interrupt masks Input: ad714x - fix up input configuration Input: elantech - remove support for proprietary X driver Input: elantech - report multitouch with proper ABS_MT messages Input: elantech - export pressure and width when supported Input: elantech - describe further the protocol Input: atmel_tsadcc - correct call to input_free_device Input: add driver FSL MPR121 capacitive touch sensor Input: remove useless synchronize_rcu() calls Input: ads7846 - fix gpio_pendown configuration Input: ads7846 - add possibility to use external vref on ads7846 Input: rotary-encoder - add support for half-period encoders ...
2011-05-24Merge branch 'next' into for-linusDmitry Torokhov58-392/+1932
2011-05-23Merge branch 'tty-next' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits) serial: 8250_pci: add support for Cronyx Omega PCI multiserial board. tty/serial: Fix break handling for PORT_TEGRA tty/serial: Add explicit PORT_TEGRA type n_tracerouter and n_tracesink ldisc additions. Intel PTI implementaiton of MIPI 1149.7. Kernel documentation for the PTI feature. export kernel call get_task_comm(). tty: Remove to support serial for S5P6442 pch_phub: Support new device ML7223 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter ASoC: Update cx20442 for TTY API change pch_uart: Support new device ML7223 IOH parport: Use request_muxed_region for IT87 probe and lock tty/serial: add support for Xilinx PS UART n_gsm: Use print_hex_dump_bytes drivers/tty/moxa.c: Put correct tty value TTY: tty_io, annotate locking functions TTY: serial_core, remove superfluous set_task_state TTY: serial_core, remove invalid test Char: moxa, fix locking in moxa_write ... Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and drivers/tty/serial/Makefile. I did the hci_ldisc thing as an evil merge, cleaning things up.
2011-05-19input/atari: Fix mouse movement and button mappingGeert Uytterhoeven1-4/+4
Up and down movements were reversed, left and right buttons were swapped. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19input/atari: Fix atarimouse initMichael Schmitz2-4/+6
Atarimouse fails to load as a module (with ENODEV), due to a brown paper bag bug, misinterpreting the semantics of atari_keyb_init(). [geert] Propagate the return value of atari_keyb_init() everywhere Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19input/atari: Use the correct mouse interrupt hookMichael Schmitz1-1/+1
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not atari_input_mouse_interrupt_hook. Fix below. [geert] Killed off atari_mouse_interrupt_hook completely, after fixing another incorrect assignment in atarimouse.c. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19Input: ADP5589 - new driver for I2C Keypad Decoder and I/O ExpanderMichael Hennerich3-0/+782
From http://www.analog.com/ADP5589: The ADP5589 is an I/O port expander and keypad matrix decoder designed for QWERTY type phones that require a large keypad matrix and expanded I/O lines. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add X, Y and Z fuzz factors to platform dataThierry Reding1-3/+4
These new platform-specific values can be used to set the fuzz parameter passed to the input_set_abs_params() function for the ABS_X, ABS_Y and ABS_PRESSURE axes. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add poll_period parameter to platform dataThierry Reding1-3/+3
This new parameter allows the polling frequency to be configured while keeping the default of once every millisecond. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add poll_delay parameter to platform dataThierry Reding1-2/+3
Depending on the quality of the touch panel, the time for the X-, X+, Y- and Y+ inputs to settle may vary. The poll_delay parameter can be used to override the default of 1 millisecond. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add max_rt parameter to platform dataThierry Reding1-1/+3
Finger touch events or very quick stylus events on low-quality panels can cause the tsc2007 to read bogus values. Looking at oscilloscope snapshots, this seems to be caused by the touch event disappearing during the measurements. These bogus values result in misclicks, where the X and Y values deviate from the real position. Most of these misclicks can be filtered out by setting a low enough threshold for the maximum resistance (which is loosely the inverse of the pressure) allowed to consider a set of values valid. Since this behaviour is largely dependent on the type and quality of the panel, this commit introduces the max_rt parameter. The default value is kept at MAX_12BIT. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - debounce pressure measurementThierry Reding1-1/+3
When the controller signals a pen-down event via the platform-specific GPIO, while the sample values indicate an invalid measurement, the measurement needs to be repeated. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - fix captouch wheel option algorithmMichael Hennerich1-90/+19
As reported by Jean-Francois Dagenais, the wheel algorithm caused a divide by zero exception due to missing variable pre-initialization. In fact it turned out that the whole algorithm had several problems. It is therefore replaced with something that is known working. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - allow platform code to specify irqflagsMichael Hennerich1-1/+3
Add option to specify irqflags in platfrom data. Also update copyright notice. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - fix threshold and completion interrupt masksMichael Hennerich1-4/+4
Fix two issues in the threshold and completion interrupt mask and unmask functions. According to the AD714x datasheets the highest stage completion interrupt should be enabled. Fix mask computation. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - fix up input configurationMichael Hennerich1-0/+8
Add missing input name and set up parent devices so input devices will show in proper places in sysfs tree. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: elantech - remove support for proprietary X driverÉric Piel1-12/+0
Apparently somewhere someone had a proprietary X driver. To get the multitouch info, it uses some hack on the normal API instead of using the multitouch protocol. Now that the multitouch info is transmitted correctly it makes not much sense to keep it. Especially because it's impossible to find this proprietary X driver anywhere, so the number of users must be very low. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: elantech - report multitouch with proper ABS_MT messagesÉric Piel1-5/+34
Multitouch info was reported only via a old protocol used by the proprietary X driver from elantech. Let's report the multitouch info also following the official MT protocol. It's semi-mt because the device only reports the lowest/highest coordinates. This was done following the multi-touch-protocol.txt documentation, and inspired by the bcm5974 and elantech implementations. Testing was light as there is not many applications using this protocol yet, but the X synaptics driver didn't complain and the X multitouch driver behaved correctly. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: elantech - export pressure and width when supportedÉric Piel2-1/+28
Using the info of the Dell/Ubuntu driver, described in the protocol document, report both width and pressure when pressing 1 and 3 fingers, for the versions of the touchpad which support it. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-14Input: atmel_tsadcc - correct call to input_free_deviceJulia Lawall1-1/+1
This error handling code can be reached before ts_dev->input is initialized, so it is safer to always use the original name, input_dev. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12arch/tile: finish enabling support for TILE-Gx 64-bit chipChris Metcalf1-1/+1
This support was partially present in the existing code (look for "__tilegx__" ifdefs) but with this change you can build a working kernel using the TILE-Gx toolchain and ARCH=tilegx. Most of these files are new, generally adding a foo_64.c file where previously there was just a foo_32.c file. The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx, using the existing SRCARCH mechanism in the top-level Makefile. Changes to existing files: - <asm/bitops.h> and <asm/bitops_32.h> changed to factor the include of <asm-generic/bitops/non-atomic.h> in the common header. - <asm/compat.h> and arch/tile/kernel/compat.c changed to remove the "const" markers I had put on compat_sys_execve() when trying to match some recent similar changes to the non-compat execve. It turns out the compat version wasn't "upgraded" to use const. - <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were previously included accidentally, with the 32-bit contents. Now they have the proper 64-bit contents. Finally, I had to hack the existing hacky drivers/input/input-compat.h to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
2011-05-12Merge branch 'for-linus' of ↵Linus Torvalds1-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove unused variable from struct ads7845_ser_req Input: ads7846 - make transfer buffers DMA safe
2011-05-12Input: add driver FSL MPR121 capacitive touch sensorZhang Jiejing3-0/+352
This patch adds basic support for Freescale MPR121 capacitive touch sensor. It's an i2c controller with up to 12 capacitance sensing inputs. Product information (data sheet, application notes) can be found here: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: remove useless synchronize_rcu() callsEric Dumazet4-5/+0
There is no need to call synchronize_rcu() after a list insertion, or a NULL->ptr assignment. However, the reverse operations do need this call. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: ads7846 - fix gpio_pendown configurationIgor Grinberg1-0/+7
The pendown gpio was requested but not configured for input. Configure it for input. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: ads7846 - add possibility to use external vref on ads7846Alexander Stein1-8/+11
Just set vref_mv in your platform config to use external vref. Otherwise the internal one is used. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: rotary-encoder - add support for half-period encodersJohan Hovold1-3/+39
Add support for encoders that have two detents per input signal period. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-11Input: rotary-encoder - refactor and clean upJohan Hovold1-33/+44
Refactor state retrieval and event reporting in interrupt handler. Remove a few empty lines. Signed-off-by: Johan Hovold <jhovold@gmail.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-11Input: tegra-kbc - change wakeup logic to be all or nothingRakesh Iyer1-22/+2
Tegra hardware design cannot reliably support an arbitrary set of keys waking up the system. Modify wakeup logic so either any key wakes the system up or none will do. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - remove unused variable from struct ads7845_ser_reqAlexander Stein1-1/+0
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - make transfer buffers DMA safeAlexander Stein1-2/+10
req.sample needs its own cacheline otherwise accessing req.msg fetches it in again. Note: This effect doesn't occur if the underlying SPI driver doesn't use DMA at all. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ati_remote2 - return the error code from sysfs channel_mask storeVille Syrjala1-3/+6
If the channel_mask setup fails when configuring it through sysfs, return the error code to the caller instead of claiming success. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: sh_keysc - only compile PM code if PM is enabledDmitry Torokhov1-4/+4
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03Input: h3600_ts_input - fix a leak of the IRQ during init failureAxel Lin1-4/+4
Make sure we are passing the same cookie in all calls to request_irq() and free_irq(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03Input: sh_keysc - make sh_keysc_device_driver staticDmitry Torokhov1-1/+1
This variable is not used outside of the module so we should mark it as static. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-02Merge branch 'for-linus' of ↵Linus Torvalds1-11/+64
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wm831x-ts - move BTN_TOUCH reporting to data transfer Input: wm831x-ts - allow IRQ flags to be specified Input: wm831x-ts - fix races with IRQ management
2011-04-28Input: sh_keysc - switch to threaded IRQ handlerMagnus Damm1-1/+2
Update the KEYSC driver to make use of threaded IRQs with IRQF_ONESHOT to improve interrupt latency. The driver is using udelay() in the ISR to make sure the hardware has stabilized. Without using interrupt threads this delay may affect the latency of the rest of the system. Also pass dev_name() as string for /proc/interrupts. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-28Input: sh_keysc - implement runtime PM supportMagnus Damm1-25/+15
Convert the KEYSC driver from MSTP bit control through a magic clock string to making use of Runtime PM. Also, update the system suspend/resume callbacks to drop the Runtime PM reference in the case of wakeup disabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 12:10:13 +0000