summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2018-12-26Merge branch 'parisc-4.21-1' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The major change in this patchset is the new system call table generation support from Firoz Khan" * 'parisc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: syscalls: ignore nfsservctl for other architectures parisc: generate uapi header and system call table files parisc: add system call table generation support parisc: remove __NR_Linux from uapi header file. parisc: add __NR_syscalls along with __NR_Linux_syscalls parisc: move __IGNORE* entries to non uapi header parisc: Fix HP SDC hpa address output parisc: Fix serio address output parisc: Split out alternative live patching code
2018-12-21Merge branch 'for-linus' of ↵Linus Torvalds3-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Switching a few devices with Synaptics over to SMbus and disabling SMbus on a couple devices with Elan touchpads as they need more plumbing on PS/2 side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - enable SMBus for HP EliteBook 840 G4 Input: elantech - disable elan-i2c for P52 and P72 Input: synaptics - enable RMI on ThinkPad T560 Input: omap-keypad - fix idle configuration to not block SoC idle states
2018-12-21Input: synaptics - enable SMBus for HP EliteBook 840 G4Mantas Mikulėnas1-0/+1
dmesg reports that "Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13) says it can support a different bus." I've tested the offered psmouse.synaptics_intertouch=1 with 4.18.x and 4.19.x and it seems to work well. No problems seen with suspend/resume. Also, it appears that RMI/SMBus mode is actually required for 3-4 finger multitouch gestures to work -- otherwise they are not reported at all. Information from dmesg in both modes: psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742 psmouse serio3: synaptics: Trying to set up SMBus access rmi4_smbus 6-002c: registering SMbus-connected sensor rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3139-001, fw id: 2000742 Signed-off-by: Mantas Mikulėnas <grawity@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-21Input: elantech - disable elan-i2c for P52 and P72Benjamin Tissoires1-2/+16
The current implementation of elan_i2c is known to not support those 2 laptops. A proper fix is to tweak both elantech and elan_i2c to transmit the correct information from PS/2, which would make a bad candidate for stable. So to give us some time for fixing the root of the problem, disable elan_i2c for the devices we know are not behaving properly. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600 Link: https://bugs.archlinux.org/task/59714 Fixes: df077237cf55 Input: elantech - detect new ICs and setup Host Notify for them Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-10parisc: Fix HP SDC hpa address outputHelge Deller1-2/+2
Show the hpa address of the HP SDC instead of a hashed value, e.g.: HP SDC: HP SDC at 0xf0201000, IRQ 23 (NMI IRQ 24) Signed-off-by: Helge Deller <deller@gmx.de>
2018-12-10parisc: Fix serio address outputHelge Deller1-2/+2
We want the hpa addresses printed in the serio modules, not some virtual ioremap()ed address, e.g.: serio: gsc-ps2-keyboard port at 0xf0108000 irq 22 @ 2:0:11 serio: gsc-ps2-mouse port at 0xf0108100 irq 22 @ 2:0:12 Signed-off-by: Helge Deller <deller@gmx.de>
2018-12-08Input: synaptics - enable RMI on ThinkPad T560Yussuf Khalil1-0/+1
Before commit 7fd6d98b89f3 ("i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus"), enabling RMI on the T560 would cause the touchpad to stop working after resuming from suspend. Now that this issue is fixed, RMI can be enabled safely and works fine. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Yussuf Khalil <dev@pp3345.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-08Input: omap-keypad - fix idle configuration to not block SoC idle statesTony Lindgren1-12/+4
With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds10-50/+46
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-12-03Input: omap-keypad - fix keyboard debounce configurationTony Lindgren1-4/+14
I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman1-10/+6
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - enable SMBus for HP 15-ay000Teika Kazura1-0/+1
SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.html Reported-by: Nitesh Debnath <niteshkd1999@gmail.com> Reported-by: Teika Kazura <teika@gmx.com> Signed-off-by: Teika Kazura <teika@gmx.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - add PNP ID for ThinkPad P50 to SMBusLyude Paul1-0/+1
Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARRNoah Westervelt1-0/+1
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add support for ELAN0621 touchpadAdam Wong1-0/+1
Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong <adam@adamwong.me> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-15Input: hyper-v - fix wakeup from suspend-to-idleVitaly Kuznetsov1-1/+1
It makes little sense but still possible to put Hyper-V guests into suspend-to-idle state. To wake them up two wakeup sources were registered in the past: hyperv-keyboard and hid-hyperv. However, since commit eed4d47efe95 ("ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch to pm_wakeup_hard_event() API as these devices are actually the only possible way to wakeup Hyper-V guests. Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: atkbd - clean up indentation issueColin Ian King1-1/+1
Trivial fix to clean up indentation issues, add missing tab Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: st1232 - convert to SPDX identifiersKuninori Morimoto1-10/+2
This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: migor_ts - convert to SPDX identifiersKuninori Morimoto1-14/+1
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: cros_ec_keyb - fix button/switch capability reportsBrian Norris1-1/+2
The cros_ec_keyb_bs array lists buttons and switches together, expecting that its users will match the appropriate type and bit fields. But cros_ec_keyb_register_bs() only checks the 'bit' field, which causes misreported input capabilities in some cases. For example, tablets (e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to share the same bit. (This has comedic effect on a tablet, in which a power-management daemon then thinks this "lid" is closed, and so puts the system to sleep as soon as it boots!) To fix this, check both the 'ev_type' and 'bit' fields before reporting the capability. Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid (Scarlet / Acer Chromebook Tab 10). This error got introduced when porting the feature from the downstream Chromium OS kernel to be upstreamed. Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: elan_i2c - add ELAN0620 to the ACPI tablePatrick Gaskin1-0/+1
Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by: Patrick Gaskin <patrick@pgaskin.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: matrix_keypad - check for errors from of_get_named_gpio()Christian Hoff1-9/+14
"of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff <christian_hoff@gmx.net> Suggested-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-28Merge branch 'xarray' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds1-1/+1
Pull XArray conversion from Matthew Wilcox: "The XArray provides an improved interface to the radix tree data structure, providing locking as part of the API, specifying GFP flags at allocation time, eliminating preloading, less re-walking the tree, more efficient iterations and not exposing RCU-protected pointers to its users. This patch set 1. Introduces the XArray implementation 2. Converts the pagecache to use it 3. Converts memremap to use it The page cache is the most complex and important user of the radix tree, so converting it was most important. Converting the memremap code removes the only other user of the multiorder code, which allows us to remove the radix tree code that supported it. I have 40+ followup patches to convert many other users of the radix tree over to the XArray, but I'd like to get this part in first. The other conversions haven't been in linux-next and aren't suitable for applying yet, but you can see them in the xarray-conv branch if you're interested" * 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits) radix tree: Remove multiorder support radix tree test: Convert multiorder tests to XArray radix tree tests: Convert item_delete_rcu to XArray radix tree tests: Convert item_kill_tree to XArray radix tree tests: Move item_insert_order radix tree test suite: Remove multiorder benchmarking radix tree test suite: Remove __item_insert memremap: Convert to XArray xarray: Add range store functionality xarray: Move multiorder_check to in-kernel tests xarray: Move multiorder_shrink to kernel tests xarray: Move multiorder account test in-kernel radix tree test suite: Convert iteration test to XArray radix tree test suite: Convert tag_tagged_items to XArray radix tree: Remove radix_tree_clear_tags radix tree: Remove radix_tree_maybe_preload_order radix tree: Remove split/join code radix tree: Remove radix_tree_update_node_t page cache: Finish XArray conversion dax: Convert page fault handlers to XArray ...
2018-10-27Merge branch 'for-linus' of ↵Linus Torvalds11-24/+57
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just random driver fixups, nothing exiting" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - avoid using uninitialized variable when probing Input: xen-kbdfront - mark expected switch fall-through Input: atmel_mxt_ts - mark expected switch fall-through Input: cyapa - mark expected switch fall-throughs Input: wm97xx-ts - fix exit path Input: of_touchscreen - add support for touchscreen-min-x|y Input: Fix DIR-685 touchkeys MAINTAINERS entry Input: elants_i2c - use DMA safe i2c when possible Input: silead - try firmware reload after unsuccessful resume Input: st1232 - set INPUT_PROP_DIRECT property Input: xilinx_ps2 - convert to using %pOFn instead of device_node.name Input: atmel_mxt_ts - fix multiple <linux/property.h> includes Input: sun4i-lradc - convert to using %pOFn instead of device_node.name Input: pwm-vibrator - correct pwms in DT binding example
2018-10-25Merge tag 'mfd-next-4.20' of ↵Linus Torvalds1-5/+17
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - Add support for USART SPI to AT91* New Functionality - Add support for Audio CODECs to motorola-cpcap Fix-ups - DT documentation fix-ups; atmel-usart - Staticise functions/structs; spi-at91-usart, arizona-core - Constify; ti-lmu - Fix memory leaks; menelaus - Change device 'wake-up' status; ti_am335x_tscadc, max8997 - Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997 - SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers), - Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_* - Build as module; sec-irq - Use new %pOFn printk format for device_node.name; max77620 - Remove unused code; madera - Use generic MACROs; intel_msic, intel_soc_pmic_crc - Move to GPIOD; ti-lmu - Use managed resources; ti-lmu Bug Fixes - Add missing headers; at91-usart - Prevent device from entering low-power mode; arizona-core - Poll for BOOT_DONE to avoid still-booting NACK; madera-core - Prevent ADC read from shutting down device; mc13xxx-core" * tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: cros_ec: Avoid unneeded internal declaration warning mfd: ti-lmu: Use of_device_get_match_data() helper mfd: ti-lmu: Use managed resource for everything mfd: ti-lmu: Switch to GPIOD mfd: ti-lmu: constify mfd_cell tables mfd: max8997: Disable interrupt handling for suspend/resume cycle mfd: max8997: Enale irq-wakeup unconditionally mfd: arizona: Make array mclk_name static, shrinks object size MAINTAINERS: Add myself as designated reviewer of Intel MFD PMIC mfd: Convert Intel PMIC drivers to use SPDX identifier 1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier. mfd: Sort headers alphabetically for Intel PMIC drivers mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macro mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macro mfd: intel_msic: Use DEFINE_RES_IRQ() macro mfd: motorola-cpcap: Add audio-codec support mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values mfd: madera: Remove unused forward reference mfd: max77620: Convert to using %pOFn instead of device_node.name mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE ...
2018-10-24Merge branch 'work.tty-ioctl' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull tty ioctl updates from Al Viro: "This is the compat_ioctl work related to tty ioctls. Quite a bit of dead code taken out, all tty-related stuff gone from fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain, but all more or less generic tty-related ioctls should be covered (remaining issues are in things like driver-private ioctls in a pcmcia serial card driver not getting properly handled in 32bit processes on 64bit host, etc)" * 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits) kill TIOCSERGSTRUCT change semantics of ldisc ->compat_ioctl() kill TIOCSER[SG]WILD synclink_gt(): fix compat_ioctl() pty: fix compat ioctls compat_ioctl - kill keyboard ioctl handling gigaset: add ->compat_ioctl() vt_compat_ioctl(): clean up, use compat_ptr() properly gigaset: don't try to printk userland buffer contents dgnc: don't bother with (empty) stub for TCXONC dgnc: leave TIOC[GS]SOFTCAR to ldisc remove fallback to drivers for TIOCGICOUNT dgnc: break-related ioctls won't reach ->ioctl() kill the rest of tty COMPAT_IOCTL() entries dgnc: TIOCM... won't reach ->ioctl() isdn_tty: TCSBRK{,P} won't reach ->ioctl() kill capinc_tty_ioctl() take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl() synclink: reduce pointless checks in ->ioctl() complete ->[sg]et_serial() switchover ...
2018-10-23Merge tag 'regmap-v5.0' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A small update with a couple of new APIs that are useful for some small sets of devices: - Split up the single_rw flagging to map read and write separately as some devices support bulk operations for only read or only write. - Add a write version of the noinc API. - Clean up the code for LOG_DEVICE a bit" * tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: use less #ifdef for LOG_DEVICE regmap: Add regmap_noinc_write API regmap: split up regmap_config.use_single_rw regmap: fix comment for regmap.use_single_write
2018-10-22Merge branch 'next' into for-linusDmitry Torokhov11-24/+57
Prepare input updates for 4.20 merge window.
2018-10-21Merge remote-tracking branches 'regmap/topic/noinc' and ↵Mark Brown1-1/+2
'regmap/topic/single-rw' into regmap-next
2018-10-20Merge branch 'for-linus' of ↵Greg Kroah-Hartman1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for 4.19-rc8 Just an addition to elan touchpad driver ACPI table." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
2018-10-19Input: synaptics - avoid using uninitialized variable when probingDmitry Torokhov1-3/+1
synaptics_detect() does not check whether sending commands to the device succeeds and instead relies on getting unique data from the device. Let's make sure we seed entire buffer with zeroes to make sure we will not use garbage on stack that just happen to be 0x47. Reported-by: syzbot+13cb3b01d0784e4ffc3f@syzkaller.appspotmail.com Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-16Input: xen-kbdfront - mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I placed the "fall through" part at the beginning of the code comment, which is what GCC is expecting to find. Addresses-Coverity-ID: 114757 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-15Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGMMikhail Nikiforov1-0/+1
Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15IGM. Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-15Input: atmel_mxt_ts - mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-15Input: cyapa - mark expected switch fall-throughsGustavo A. R. Silva1-2/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the "Fallthrough state" commern with a proper "Fall through", which is what GCC is expecting to find. Addresses-Coverity-ID: 114758 ("Missing break in switch") Addresses-Coverity-ID: 114759 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-15Input: wm97xx-ts - fix exit pathRandy Dunlap1-1/+2
Loading then unloading wm97xx-ts.ko when CONFIG_AC97_BUS=m causes a WARNING: from drivers/base/driver.c: Unexpected driver unregister! WARNING: CPU: 0 PID: 1709 at ../drivers/base/driver.c:193 driver_unregister+0x30/0x40 Fix this by only calling driver_unregister() with the same condition that driver_register() is called. Fixes: ae9d1b5fbd7b ("Input: wm97xx: add new AC97 bus support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-13change semantics of ldisc ->compat_ioctl()Al Viro1-1/+1
First of all, make it return int. Returning long when native method had never allowed that is ridiculous and inconvenient. More importantly, change the caller; if ldisc ->compat_ioctl() is NULL or returns -ENOIOCTLCMD, tty_compat_ioctl() will try to feed cmd and compat_ptr(arg) to ldisc's native ->ioctl(). That simplifies ->compat_ioctl() instances quite a bit - they only need to deal with ioctls that are neither generic tty ones (those would get shunted off to tty_ioctl()) nor simple compat pointer ones. Note that something like TCFLSH won't reach ->compat_ioctl(), even if ldisc ->ioctl() does handle it - it will be recognized earlier and passed to tty_ioctl() (and ultimately - ldisc ->ioctl()). For many ldiscs it means that NULL ->compat_ioctl() does the right thing. Those where it won't serve (see e.g. n_r3964.c) are also easily dealt with - we need to handle the numeric-argument ioctls (calling the native instance) and, if such would exist, the ioctls that need layout conversion, etc. All in-tree ldiscs dealt with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-12Merge branch 'for-linus' of ↵Greg Kroah-Hartman5-9/+26
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc7 - we added a few scheduling points into various input interfaces to ensure that large writes will not cause RCU stalls - fixed configuring PS/2 keyboards as wakeup devices on newer platforms - added a new Xbox gamepad ID." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - add a schedule point in uinput_inject_events() Input: evdev - add a schedule point in evdev_write() Input: mousedev - add a schedule point in mousedev_write() Input: i8042 - enable keyboard wakeups by default when s2idle is used Input: xpad - add support for Xbox1 PDP Camo series gamepad
2018-10-11Input: of_touchscreen - add support for touchscreen-min-x|yHans de Goede1-8/+28
Some touchscreens, depending on the firmware and/or the digitizer, report coordinates which never reach 0 along one or both of their axis. This has been seen for example on the Silead touchscreens on a Onda V891w and a Point of View mobii TAB-P800w(v2.0). This commit adds support for touchscreen-min-x and touchscreen-min-y device-properties which can be set to communicate the actual start coordinates (rather then 0,0) to userspace. This commit also drop the "(in pixels)" comment from the documentation of the touchscreen-size-x and touchscreen-size-y properties. The comment suggested that there is a relation between the range of reported coordinates and the display resolution, which is only true for some devices. The "(in pixels)" comment is replaced with "(maximum x coordinate reported + 1)" to mirror the language describing the new touchscreen-min-x and -min-y properties. When set this fixes e.g. not being able to click things in the GNOME3 top-bar on the 2 example tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-10Input: elants_i2c - use DMA safe i2c when possibleStephen Boyd1-3/+4
To avoid bounce buffer when an i2c controller decides to use DMA for a transaction, let's make out buffer that we use for reads DMA-safe and let the master know that DMAing into it is safe. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-09Input: ti_am335x_tsc: Mark IRQ as wakeup capableVignesh R1-0/+6
On AM335x, ti_am335x_tsc can wake up the system from suspend, mark the IRQ as wakeup capable, so that device irq is not disabled during system suspend. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-09Input: ti_am335x_tsc: Mark TSC device as wakeup sourceVignesh R1-5/+11
Instead of TSCADC MFD device, mark TSC as wakeup source and change all wakeup related PM calls to operate on TSC device. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-05Input: silead - try firmware reload after unsuccessful resumeJulian Sax1-0/+13
A certain silead controller (Chip ID: 0x56810000) loses its firmware after suspend, causing the resume to fail. This patch tries to load the firmware, should a resume error occur and retries the resuming. Signed-off-by: Julian Sax <jsbc@gmx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-05Input: st1232 - set INPUT_PROP_DIRECT propertyMartin Kepplinger1-0/+1
This is how userspace checks for touchscreen devices most reliably. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-05Input: uinput - add a schedule point in uinput_inject_events()Dmitry Torokhov1-0/+1
Large writes to uinput interface may cause rcu stalls. Let's add cond_resched() to the loop to avoid this. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-05Input: evdev - add a schedule point in evdev_write()Dmitry Torokhov1-0/+1
Large writes to evdev interface may cause rcu stalls. Let's add cond_resched() to the loop to avoid this. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-04Input: mousedev - add a schedule point in mousedev_write()Eric Dumazet1-0/+1
syzbot was able to trigger rcu stalls by calling write() with large number of bytes. Add a cond_resched() in the loop to avoid this. Link: https://lkml.org/lkml/2018/8/23/1106 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+9436b02171ac0894d33e@syzkaller.appspotmail.com Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-01Input: i8042 - enable keyboard wakeups by default when s2idle is usedDaniel Drake1-9/+20
Previously, on typical consumer laptops, pressing a key on the keyboard when the system is in suspend would cause it to wake up (default or unconditional behaviour). This happens because the EC generates a SCI interrupt in this scenario. That is no longer true on modern laptops based on Intel WhiskeyLake, including Acer Swift SF314-55G, Asus UX333FA, Asus UX433FN and Asus UX533FD. We confirmed with Asus EC engineers that the "Modern Standby" design has been modified so that the EC no longer generates a SCI in this case; the keyboard controller itself should be used for wakeup. In order to retain the standard behaviour of being able to use the keyboard to wake up the system, enable serio wakeups by default on platforms that are using s2idle. Link: https://lkml.kernel.org/r/CAB4CAwfQ0mPMqCLp95TVjw4J0r5zKPWkSvvkK4cpZUGE--w8bQ@mail.gmail.com Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-01Input: xpad - add support for Xbox1 PDP Camo series gamepadRamses Ramírez1-0/+3
The "Xbox One PDP Wired Controller - Camo series" has a different product-id than the regular PDP controller and the PDP stealth series, but it uses the same initialization sequence. This patch adds the product-id of the camo series to the structures that handle the other PDP Xbox One controllers. Signed-off-by: Ramses Ramírez <ramzeto@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-01Input: xilinx_ps2 - convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 19:01:41 +0000