summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2014-05-18Input: atmel_mxt_ts - remove unnecessary platform dataNick Dyer1-50/+0
It is not necessary to download these values to the maXTouch chip on every probe, since they are stored in NVRAM. It makes life difficult when tuning the device to keep them in sync with the config array/file, and requires a new kernel build for minor tweaks. These parameters only represent a tiny subset of the available configuration options, tracking all of these options in platform data would be a endless task. In addition, different versions of maXTouch chips may have these values in different places or may not even have them at all. Having these values also makes life more complex for device tree and other platforms where having to define a static configuration isn't helpful. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - implement wakeup from suspendRoger Quadros1-4/+43
Improve the suspend and resume handlers to allow the device to wakeup the system from suspend. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - get rid of pdata->attb_read_val()Roger Quadros1-1/+15
Get rid of the attb_read_val() platform hook. Instead, read the ATTB gpio directly from the driver. Fail if valid ATTB gpio is not provided by patform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - initialize interrupt mode and power modeRoger Quadros1-8/+174
Introduce helper functions to configure power and interrupt registers. Default to IDLE mode on probe as device supports auto wakeup to ACVIE mode on detecting finger touch. Configure interrupt mode and polarity on start up. Power down on device closure or module removal. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - use devres managed resource allocationsRoger Quadros1-23/+15
Use devm_() and friends for allocating memory, input device and IRQ. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: ims-pcu - fix uninitialized use of 'error' in ims_pcu_buffers_alloc()Christian Engelmayer1-0/+1
In case allocation via usb_alloc_coherent() fails in ims_pcu_buffers_alloc(), the function jumps to the exit path without initializing local variable 'error' that is used as return value. Detected by Coverity - CID 1016531. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: wacom - add support for three new ISDv4 sensorsJason Gerecke3-1/+41
This patch adds support for the 0x4004, 0x5000, and 0x5002 sensors found on what should be the Motion R12, Fujitsu Q704, and Fujitsu T904. These tablets use a new report ID (3) for their touch packets and a slightly different HID descriptor format, but are otherwise largely identical in protocol to the "MTTPC" tablets. Note: * The R12 uses its 0x4004 sensor for touch input only. A pen interface is not present in its HID descriptor, though its possible a 0x4004 may be used for pen input by other tablet PCs in the future. * The 0x5002 sensor appears to use a new report ID (8) for its pen packets. The other sensors continue to use the traditional report ID (2). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: wacom - use unaligned access where necessaryJason Gerecke1-9/+9
A few cases of incorrectly using 'le16_to_cpup' instead of 'get_unaligned_le16' have been noticed and fixed. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Merge tag 'v3.15-rc5' into nextDmitry Torokhov23-212/+450
Merge with Linux 3.15-rc5 to sync up Wacom and other changes.
2014-05-14Input: pmic8xxx-pwrkey - set sane default for debounce timeStephen Boyd1-4/+4
If the debounce time is 0 our usage of ilog2() later on in this driver will cause undefined behavior. If CONFIG_OF=n this fact is evident to the compiler, and it emits a call to ____ilog2_NaN() which doesn't exist. Fix this by setting a sane default for debounce and failing to probe if debounce is 0 in the DT. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: wacom - add support for 0x116 sensor on Win8 Panasonic CF-H2Jason Gerecke2-0/+9
The Win8 version of the Panasonic CF-H2 includes a new Wacom device. The pen interface appears to use the same protocol as before, but the touch interface has been tweaked to send Win8-compatible reports. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: sun4i-ts - add support for temperature sensorHans de Goede2-31/+109
The sun4i resisitive touchscreen controller also comes with a built-in temperature sensor. This commit adds support for it. This commit also introduces a new "ts-attached" device-tree property, when this is not set, the input part of the driver won't register. This way the internal temperature sensor can be used to measure the SoC temperature independent of there actually being a touchscreen attached to the controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: add driver for Allwinner sunxi SoC's rtp controllerHans de Goede3-0/+273
Note the sun4i-ts controller is capable of detecting a second touch, but when a second touch is present then the accuracy becomes so bad the reported touch location is not useable. The original android driver contains some complicated heuristics using the aprox. distance between the 2 touches to see if the user is making a pinch open / close movement, and then reports emulated multi-touch events around the last touch coordinate (as the dual-touch coordinates are worthless). These kinds of heuristics are just asking for trouble (and don't belong in the kernel). So this driver offers straight forward, reliable single touch functionality only. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: logips2pp - fix typo in Kconfig helpDaniele Forsi1-1/+1
s/Logictech/Logitech/ Signed-off-by: Daniele Forsi <dforsi@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio_keys_polled - convert to devm-* APIAlexander Shiyan1-77/+21
Replace existing resource handling in the driver with managed device resources, this ensures more consistent error values and simplifies error handling paths: kzalloc -> devm_kzalloc gpio_request_one -> devm_gpio_request_one input_allocate_polled_device -> devm_input_allocate_polled_device Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: implement managed polled input devicesDmitry Torokhov1-2/+116
Managed resources are becoming more and more popular in drivers. Let's implement managed polled input devices, to complement managed regular input devices. Similarly to managed regular input devices only one new call devm_input_allocate_polled_device() is added and the rest of APIs is modified to work with both managed and non-managed devices. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: remove race when instantiating polled device attributesDmitry Torokhov1-10/+9
Polled device's attributes controlling polling rate and whether polling is enabled are attached to input device. We should have device core instantiate them for us, so that they are created by the time new device notification is sent to userspace, instead of doing it ourselves afterwards. Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio_keys - more conversions to devm-* APIAlexander Shiyan1-35/+34
Replace existing gpio resource handling in the driver with managed resources, this ensures more consistent error values and simplifies error paths. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: zforce - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: mms114 - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: lpc32xx_ts - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: egalax_ts - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: auo-pixcir-ts - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: apbps2 - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: olpc_apsp - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: rotary_encoder - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio-beeper - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: imx_keypad - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio_keys_polled - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio_keys - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: clps711x-keypad - make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio-beeper - simplify GPIO handlingAlexander Shiyan2-16/+13
This patch simplifies GPIO handling in the driver by using GPIO functions based on descriptors. As a result this driver now can be used for boards without DT support. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: tsc2005 - convert driver to use devm_*Sebastian Reichel1-23/+14
Simplify the driver by using managed resources for memory allocation of internal structure, input device allocation and irq request. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: tsc2005 - use dev_err for error messagesSebastian Reichel1-2/+2
Change some dev_dbg() invocations to dev_err() ones, because they are supposed to output error messages. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio_keys - convert to use devm_*Andy Shevchenko1-49/+25
This makes the error handling much more simpler than open-coding everything and in addition makes the probe function smaller an tidier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: twl6040-vibra - use devm functionsFabio Estevam1-51/+32
Using devm_regulator_bulk_get() and devm_input_allocate_device() can make the code cleaner and smaller as we do not need to manually free resources the error and remove paths. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: ads7877 - remove bitrotted commentMark Brown1-5/+0
While searching for users of spi_async() I found a reference in the ad7877 driver to using it to initiate data transfer from the interrupt handler. However there is no code for this, instead the interrupt handler is a threaded handler and uses spi_sync() instead. Remove the bitrotted comment, though in actual fact the use case mentioned is a great use for spi_async() since it would cut down on latency handling the interrupt by saving us a context switch before we start SPI. This was previously implemented, it was removed in commit b534422b2d11 (Input: ad7877 - switch to using threaded IRQ) for code complexity reasons. It may be better to revert that commit instead. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: evdev - get rid of old workaround for EVIOCGBITDmitry Torokhov1-18/+0
We put this workaround in 2008 and the offending userspace has been fixed up long time ago; the link in the message is no longer valid either, so it is time to retire it. Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: add st-keyscan driverGabriel FERNANDEZ3-0/+286
This patch adds ST Keyscan driver to use the keypad hw a subset of ST boards provide. Specific board setup will be put in the given dt. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: ads7846 - correct log message for spi_sync() errorsMark Brown1-1/+1
While searching for users of spi_async() I got a false positive in the ads7846 driver, fix that. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: tc3589x-keypad - support probing from device treeLinus Walleij1-2/+64
Implement device tree probing for the tc3589x keypad driver. This is modeled on the STMPE keypad driver and tested on the Ux500 TVK1281618 UIB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: w90p910_ts - depend on ARCH_W90X900Jean Delvare1-1/+1
The w90p910_ts touchscreen driver is heavily architecture dependent, so there is no point in letting it be built on other architectures than it was written for. All other W90P910/W90X900 drivers already have that dependency, so it makes things more consistent and configuration easier. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-08Merge branch 'for-linus' of ↵Linus Torvalds6-3/+72
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just a few fixups to various drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - fix touchpad initialization on Gigabyte U2442 Input: tca8418 - fix loading this driver as a module from a device tree Input: bma150 - extend chip detection for bma180 Input: atkbd - fix keyboard not working on some LG laptops Input: synaptics - add min/max quirk for ThinkPad Edge E431
2014-05-05Input: elantech - fix touchpad initialization on Gigabyte U2442Hans de Goede2-1/+26
The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept 0x0b as initialization value for r10, this stand-alone version of the driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2 Uses 0x03 which does work, so this means not setting bit 3 of r10 which sets: "Enable Real H/W Resolution In Absolute mode" Which will result in half the x and y resolution we get with that bit set, so simply not setting it everywhere is not a solution. We've been unable to find a way to identify touchpads where setting the bit will fail, so this patch uses a dmi based blacklist for this. https://bugzilla.kernel.org/show_bug.cgi?id=61151 Cc: stable@vger.kernel.org Reported-by: Philipp Wolfer <ph.wolfer@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-24Input: tca8418 - fix loading this driver as a module from a device treeDr. H. Nikolaus Schaller1-0/+7
Loading the tca8418 driver as a module on a device tree based system needs a MODULE_ALIAS because the driver name does not match the automatic name generation rules of a 'compatible' entry on i2c bus. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-24Input: bma150 - extend chip detection for bma180Dr. H. Nikolaus Schaller1-1/+3
This driver has been used while on the OpenPhoenux GTA04 with a BMA180. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-24Input: atkbd - fix keyboard not working on some LG laptopsSheng-Liang Song1-1/+28
After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands. In order to keep changes in atkbd driver to the minimum we check DMI signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG LW25-B7HV or P1-J273B. Cc: stable@vger.kernel.org Signed-off-by: Sheng-Liang Song <ssl@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-23Input: synaptics - add min/max quirk for ThinkPad Edge E431Hans de Goede1-0/+8
Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-23Merge branch 'for-linus' of ↵Linus Torvalds10-151/+261
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The main change is that we now publish "firmware ID" for the serio devices to help userspace figure out the kind of touchpads it is dealing with: i8042 will export PS/2 port's PNP IDs as firmware IDs. You will also get more quirks for Synaptics touchpads in various Lenovo laptops, a change to elantech driver to recognize even more models, and fixups to wacom and couple other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add support for newer elantech touchpads Input: soc_button_array - fix a crash during rmmod Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1 Input: synaptics - report INPUT_PROP_TOPBUTTONPAD property Input: Add INPUT_PROP_TOPBUTTONPAD device property Input: i8042 - add firmware_id support Input: serio - add firmware_id sysfs attribute Input: wacom - handle 1024 pressure levels in wacom_tpc_pen Input: wacom - references to 'wacom->data' should use 'unsigned char*' Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSURE Input: wacom - use full 32-bit HID Usage value in switch statement Input: wacom - missed the last bit of expresskey for DTU-1031 Input: ads7846 - fix device usage within attribute show Input: da9055_onkey - remove use of regmap_irq_get_virq()
2014-04-22Input: elantech - add support for newer elantech touchpadsJordan Rife1-0/+1
Newer elantech touchpads are not recognized by the current driver, since it fails to detect their firmware version number. This prevents more advanced touchpad features from being usable such as two-finger scrolling. This patch allows newer touchpads to be detected and be fully functional. Tested on Sony Vaio SVF13N17PXB. Signed-off-by: Jordan Rife <jrife0@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-26 00:08:44 +0000