summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2009-05-29Merge branch 'for-linus' of ↵Linus Torvalds3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - better handle bad scheduler decisions Input: usb1400_ts - fix access to "device data" in resume function Input: multitouch - augment event semantics documentation Input: multitouch - add tracking ID to the protocol
2009-05-28Input: libps2 - better handle bad scheduler decisionsDmitry Torokhov1-1/+1
Sometimes devices send us their responses in time but due to unfortunate scheduling decisions the receiving thread does not get scheduled till much later and we erroneously decide that device timed out. Work around this problem by checking whether we received the data we needed instead of checking timeout condition. Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-27Input: usb1400_ts - fix access to "device data" in resume functionManuel Traut1-1/+1
platform_data != driver_data driver data is actually the "correct" place of the struct however it is not placed there due to the need of the ac97 struct. This is broken since d9105c2b01 aka "[ARM] 5184/1: Split ucb1400_ts into core and touchscreen" Signed-off-by: Manuel Traut <manut@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-23Input: multitouch - add tracking ID to the protocolHenrik Rydberg1-0/+1
There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-20[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *Alessandro Rubini1-1/+1
The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-12Merge branch 'for-linus' of ↵Linus Torvalds4-4/+27
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc2007 - fix locking in hrtimer handler Input: atkbd - add force release keys quirk for Amilo Xi 3650 Input: ff-memless - fix signed to unsigned bit overflow Input: joydev - blacklist digitizers
2009-05-11Input: tsc2007 - fix locking in hrtimer handlerThierry Reding1-2/+3
Now that hrtimers are always running in hard irq context we can't unconditionally enable interrupts at the end of the timer function. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11Input: atkbd - add force release keys quirk for Amilo Xi 3650Adrian Batzill1-0/+16
Signed-off-by: Adrian Batzill <agib@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-07Input: ff-memless - fix signed to unsigned bit overflowJussi Kivilinna1-1/+1
When userspace sets effect->u.rumble.strong_magnitude to 0x8001 or larger, ml_combine_effects() would always return strong_magnitude 0xffff. Problem is that 'gain' is passed in as signed integer. Multiplying magnitude (__u16) with gain (int) causes magnitude read as signed and results negative value (with magnitude > 0x8000). This signed integer is then divided and value, still negative, converted to 32bit unsigned integer. Finally checking combine overflow min(new+old, 0xffff) gives out 0xffff. Fix is to simply change 'gain' to unsigned int. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-07Input: joydev - blacklist digitizersTim Cole1-1/+7
BTN_TOUCH is not set by the wacom driver which causes it to be handled by the joydev driver while the resulting device is broken. This causes problems with applications that try to use a joystick device. Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143 Signed-off-by: Tim Cole <tim.cole@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-02Merge branch 'for-linus' of ↵Linus Torvalds13-51/+217
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the multi-touch (MT) protocol Input: add detailed multi-touch finger data report protocol Input: allow certain EV_ABS events to bypass all filtering Input: bcm5974 - add documentation for the driver Input: bcm5974 - augment debug information Input: bcm5974 - Add support for the Macbook 5 (Unibody) Input: bcm5974 - add quad-finger tapping Input: bcm5974 - prepare for a new trackpad header type Input: appletouch - fix DMA to/from stack buffer Input: wacom - fix TabletPC touch bug Input: lifebook - add DMI entry for Fujitsu B-2130 Input: ALPS - add signature for Toshiba Satellite Pro M10 Input: elantech - make sure touchpad is really in absolute mode Input: elantech - provide a workaround for jumpy cursor on firmware 2.34 Input: ucb1400 - use disable_irq_nosync() in irq handler Input: tsc2007 - use disable_irq_nosync() in irq handler Input: sa1111ps2 - use disable_irq_nosync() in irq handlers Input: omap-keypad - use disable_irq_nosync() in irq handler
2009-04-28Input: add detailed multi-touch finger data report protocolHenrik Rydberg1-0/+13
In order to utilize the full power of the new multi-touch devices, a way to report detailed finger data to user space is needed. This patch adds a multi-touch (MT) protocol which allows drivers to report details for an arbitrary number of fingers. The driver sends a SYN_MT_REPORT event via the input_mt_sync() function when a complete finger has been reported. In order to stay compatible with existing applications, the data reported in a finger packet must not be recognized as single-touch events. In addition, all finger data must bypass input filtering, since subsequent events of the same type refer to different fingers. A set of ABS_MT events with the desired properties are defined. The events are divided into categories, to allow for partial implementation. The minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size of the approaching finger. Anisotropy and direction may be specified with ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with more granular information may specify general shapes as blobs, i.e., as a sequence of rectangular shapes grouped together by a ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: allow certain EV_ABS events to bypass all filteringHenrik Rydberg1-0/+23
With the upcoming multi-touch interface as an example, there is a need to make certain that all reported events actually get passed to the event handler. This patch equips the input core with the ability to bypass all filtering for certain EV_ABS events. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: bcm5974 - augment debug informationHenrik Rydberg1-4/+10
Add more button and finger data to the debug output. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: bcm5974 - Add support for the Macbook 5 (Unibody)Henrik Rydberg1-2/+43
This patch adds support for the new unibody Macbook, with physically integrated button and trackpad. Since the integrated button changes the logic for touch-and-click, a device capability bit mask is now reported in input_id.version, which can be picked up by user space via a EVIOCGID call. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: David M. Lary <dmlary@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: bcm5974 - add quad-finger tappingHenrik Rydberg1-1/+3
The integrated button on the new unibody Macbooks presents a need to report explicit four-finger actions. Evidently, the finger pressing the button is also touching the trackpad, so in order to fully support three-finger actions, the driver must be able to report four-finger actions. This patch adds a new button, BTN_TOOL_QUADTAP, which achieves this. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: bcm5974 - prepare for a new trackpad header typeHenrik Rydberg1-21/+26
The new unibody Macbooks are equipped with an integrated button and trackpad. The package header of the trackpad interface has changed to also contain information about the integrated button. This patch performs the necessary preparations to allow for the new package header. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: appletouch - fix DMA to/from stack bufferBob Copeland1-6/+18
CONFIG_DMA_API_DEBUG spotted an instance of appletouch using an array on the stack as a DMA buffer for certain hardware. Change it to use a kmalloc()ed buffer instead. Signed-off-by: Bob Copeland <me@bobcopeland.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: wacom - fix TabletPC touch bugPing Cheng2-4/+14
This patch fixed a bug that was introduced in kernel 2.6.28 for TabletPC touch data. The wacom_parse_hid routine in wacom_sys.c should always return 0 even when usb_control_msg got an error. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-27maple: input: fix up maple mouse driverAdrian McMenamin1-20/+23
The maple mouse driver currently in mainline is broken: bash-3.1# modprobe maplemouse [ 56.886378] input: Dreamcast Mouse as /devices/virtual/input/input3 [ 56.918379] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 56.930543] pc = c003304e [ 56.934973] *pde = 00000000 [ 56.944948] Oops: 0000 [#1] [ 56.947867] Modules linked in: maplemouse(+) [ 56.952353] [ 56.953921] Pid : 1157, Comm: \0x09\0x09modprobe [ 56.958021] CPU : 0 \0x09\0x09Not tainted (2.6.30-rc2-00130-g3e98f9f #1) [ 56.958052] [ 56.966567] PC is at dc_mouse_open+0xe/0x40 [maplemouse] [ 56.972125] PR is at input_open_device+0x8a/0xc0 [ 56.976944] PC : c003304e SP : 8c88bdcc SR : 40008100 TEA : c0033834 [ 56.983854] R0 : 000006c4 R1 : 00000000 R2 : 40008101 R3 : 00000000 [ 56.990744] R4 : 8c8db800 R5 : c0033080 R6 : 00000005 R7 : 00000200 [ 56.997635] R8 : 8c8db800 R9 : 8c8dbe3c R10 : 00000000 R11 : 8c98881c [ 57.004525] R12 : 8c8dbe64 R13 : 8ca50140 R14 : 8c88bdd4 [ 57.010063] MACH: 00000497 MACL: 00000348 GBR : 29674440 PR : 8c1b4d0a [ 57.016939] ... Here is a fix for this, keeping an open and close, so reducing the load on the system when the mouse is not in use, and also properly referencing the maple device buffer following the recent update. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-24Input: lifebook - add DMI entry for Fujitsu B-2130Dmitry Torokhov1-0/+6
Although we already have entry for ZEPHYR the match is done on product name whereas B-2130 BIOS has it in board name. Reported-by: Yuriy Zhuravlev <stalkerg@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-23Input: ALPS - add signature for Toshiba Satellite Pro M10Dmitry Torokhov1-0/+1
This toshiba has a touchpad with trackpoint and 2 sets of left and right buttons (above and below touchpad). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-21drivers/input/serio/hp_sdc.c: fix crash when removing hp_sdc moduleHelge Deller1-1/+23
On parisc machines, which don't have HIL, removing the hp_sdc module panics the kernel. Fix this by returning early in hp_sdc_exit() if no HP SDC controller was found. Add functionality to probe for the hp_sdc_mlc kernel module (which takes care of the upper layer HIL functionality on parisc) after two seconds. This is needed to get all the other HIL drivers (keyboard / mouse/ ..) drivers automatically loaded by udev later as well. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Frans Pop <elendil@planet.nl> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-18Input: elantech - make sure touchpad is really in absolute modeArjan Opmeer1-5/+16
There exist laptops with Elantech touchpads where switching to absolute mode does not happen, although writing the configuration register succeeds without error. Reading back the register afterwards reveils that the absolute mode bit is not set as if masked out by the touchpad firmware. Always read back register 0x10, make sure that for hardware version 1 the absolute mode bit is actually set and fail otherwise. This prevents the case where the touchpad is claimed by the Elantech driver but is nonetheless not working. Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18Input: elantech - provide a workaround for jumpy cursor on firmware 2.34Arjan Opmeer2-4/+28
It seems that Elantech touchpad firmware version 2.34 on the Hercules eCAFÉ suffers from a problem where bogus coordinates get reported at the beginning of a touch action. This causes the mouse cursor or the scrolled page to jump. Included patch provides a workaround that discards mouse packets that are likely to contain bogus coordinates. The workaround is activated when we detect touchpad with fimware version 2.34. Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-17Input: ucb1400 - use disable_irq_nosync() in irq handlerBen Nizette1-1/+1
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-17Input: tsc2007 - use disable_irq_nosync() in irq handlerBen Nizette1-1/+1
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-17Input: sa1111ps2 - use disable_irq_nosync() in irq handlersBen Nizette1-1/+1
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-17Input: omap-keypad - use disable_irq_nosync() in irq handlerBen Nizette1-2/+14
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-16Merge branch 'next' into for-linusDmitry Torokhov14-43/+120
2009-04-15Input: ads7846 - fix unsafe disable_irqBen Nizette1-1/+1
The use of disable_irq inside the handler for the interrupt being disabled has always been dangerous. disable_irq should wait for that handler to complete before returning -> deadlock. For some reason this wasn't actually the case until 3aa551c9b was merged but since this time, the ads7846 driver has deadlocked the system on first interrupt. Convert the driver to use the handler-safe _nosync variant. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: mainstone-wm97xx - fix condition in pen_upJiri Slaby1-4/+3
The loop body was never executed, because the condition is always false. Convert to for with more obvious condition. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: pc110pad - remove unused variable devIlpo Järvinen1-1/+0
dev is leftover from b0ee0d3eb31a163c958f2960906c44bcdfdc607b (Input: pc110pad - use no_pci_devices()). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: bf54x-keys - remove depreciated IRQF_SAMPLE_RANDOM flagMichael Hennerich1-1/+1
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: ad7877, ad7879 - remove depreciated IRQF_SAMPLE_RANDOM flagMichael Hennerich2-4/+3
This patch removes depreciated IRQF_SAMPLE_RANDOM flags from ad7877 and ad7879 touchscreen drivers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: da9034-ts - make pen {down,up} events more reliableEric Miao1-10/+16
PEN_{UP/DOWN} events are expected to be available soon after stopping TSI auto measurement, but this is found not always be true. Work around this by adding delay and simulating such an event (according to pen down status bit). Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: da9034-ts - add Bin Yang as co-author of the driverEric Miao1-1/+2
Bin did a lot of work on this driver, without his help, this driver will not be possible. Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: atkbd - add forced release keys quirk for Samsung NC20Barry Carroll1-1/+10
Signed-off-by: Barry Carroll <baz8080@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: atkbd - add forced release keys quirk for Samsung Q45Dmitry Torokhov1-0/+9
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: gameport - fix attach driver codeDmitry Torokhov1-8/+6
The commit 6902c0bead4ce266226fc0c5b3828b850bdc884a that moved driver registration out of kgameportd thread was incomplete and did not add the code necessary to actually attach driver to already registered devices, rectify that. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15Input: hp_sdc_rtc should depend on serioAlexander Beregalov1-1/+1
Fix this build error when CONFIG_SERIO is not set hp_sdc_rtc.c:691: undefined reference to `hp_sdc_request_timer_irq' and so on.. "select should be used with care. select will force a symbol to a value without visiting the dependencies." Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11Input: wm97xx - don't specify IRQF_SAMPLE_RANDOMMark Brown1-2/+1
The input core will add entropy to the pool so this flag is not needed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11Input: ads7846 - introduce platform specific way to synchronize samplingEric Miao1-0/+10
Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11Input: remove unnecessary synchronize_rcu() callArjan van de Ven1-1/+0
There is no need to issue serialize_rcu() after adding a new handle to the list of handles associated with the device because new events will "see" the new handle in the list immediately. Remove it so we can boot a little bit faster. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11Input: i8042 - add a DMI table for the i8042.reset optionArjan van de Ven1-0/+28
There are several DMI tables in the i8042 (keyboard) driver already, but not one for the i8042.reset option. This patch adds such an option. Two users for this table are added as well, the MSI Wind U-100 and the LG X110. The MSI Wind also needs to be in the "don't trust the pnp data" for the touchpad to work on my machine. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11Input: i8042 - introduce a tougher resetArjan van de Ven1-8/+29
Some touchpads don't reset right the first time (MSI Wind U-100 for example). This patch will retry the reset up to 5 times. In addition, on x86, we don't fail entire i8042 initialization if controller reset fails in hope that keyboard port will still be functional and user will still get a working keyboard. This is especially important on netbooks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-08Merge branch 'next' into for-linusDmitry Torokhov23-182/+2909
2009-04-07Input: i8042 - add HP DV9700 to the noloop listDmitry Torokhov1-0/+8
Reported-by: Kenneth Crudup <kenny@panix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2-1/+39
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: sh7785lcr: Map whole PCI address space. sh: Fix up DSP context save/restore. sh: Fix up number of on-chip DMA channels on SH7091. sh: update defconfigs. sh: Kill off broken direct-mapped cache mode. sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle. sh: Add a command line option for disabling I/O trapping. sh: Select ARCH_HIBERNATION_POSSIBLE. sh: migor: Fix up CEU use flags. input: migor_ts: add wakeup support rtc: rtc-sh: use set_irq_wake() input: sh_keysc: use enable/disable_irq_wake() sh: intc: set_irq_wake() support sh: intc: install enable, disable and shutdown callbacks clocksource: sh_cmt: use remove_irq() and remove clockevent workaround sh: ap325 and Migo-R use new sh_mobile_ceu_info flags sh: Fix up -Wformat-security whining. sh: ap325rxa: Add ov772x support, again. sh: Sanitize asm/mmu.h for assembly use. sh: Tidy up sh7786 pinmux table. ...
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 10:02:06 +0000