summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2016-01-13Merge branch 'for-linus' of ↵Linus Torvalds24-651/+1735
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - new driver for eGalaxTouch serial touchscreen - new driver for TS-4800 touchscreen - an update for Goodix touchscreen driver - PS/2 mouse module was reworked to limit number of protocols we try on pass-through ports to speed up their detection time - wacom_w8001 touchscreen driver now reports pen and touch via separate instances of input devices - other driver changes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits) Input: elantech - mark protocols v2 and v3 as semi-mt Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE Input: gpio-keys - fix check for disabling unsupported keys Input: omap-keypad - remove dead check Input: ti_am335x_tsc - fix HWPEN interrupt handling Input: omap-keypad - set tasklet data earlier Input: rohm_bu21023 - fix handling of retrying firmware update Input: ALPS - report v3 pinnacle trackstick device only if is present Input: ALPS - detect trackstick presence for v7 protocol Input: pcap_ts - use to_delayed_work Input: bma150 - constify bma150_cfg structure Input: i8042 - add Fujitsu Lifebook U745 to the nomux list Input: egalax_ts_serial - fix potential NULL dereference on error Input: uinput - sanity check on ff_effects_max and EV_FF Input: uinput - rework ABS validation Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen" Input: goodix - add axis swapping and axis inversion support Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send Input: goodix - add power management support ...
2016-01-13Merge tag 'char-misc-4.5-rc1' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here's the big set of char/misc patches for 4.5-rc1. Nothing major, lots of different driver subsystem updates, full details in the shortlog. All of these have been in linux-next for a while" * tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (71 commits) mei: fix fasync return value on error parport: avoid assignment in if parport: remove unneeded space parport: change style of NULL comparison parport: remove unnecessary out of memory message parport: remove braces parport: quoted strings should not be split parport: code indent should use tabs parport: fix coding style parport: EXPORT_SYMBOL should follow function parport: remove trailing white space parport: fix a trivial typo coresight: Fix a typo in Kconfig coresight: checking for NULL string in coresight_name_match() Drivers: hv: vmbus: Treat Fibre Channel devices as performance critical Drivers: hv: utils: fix hvt_op_poll() return value on transport destroy Drivers: hv: vmbus: fix the building warning with hyperv-keyboard extcon: add Maxim MAX3355 driver Drivers: hv: ring_buffer: eliminate hv_ringbuffer_peek() Drivers: hv: remove code duplication between vmbus_recvpacket()/vmbus_recvpacket_raw() ...
2016-01-11Merge branch 'next' into for-linusDmitry Torokhov34-675/+1768
Prepare first round of input updates for 4.5 merge window.
2016-01-11Input: elantech - mark protocols v2 and v3 as semi-mtBenjamin Tissoires1-1/+1
When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab1-7/+6
* patchwork: (204 commits) [media] rc: sunxi-cir: Initialize the spinlock properly [media] rtl2832: do not filter out slave TS null packets [media] rtl2832: print reg number on error case [media] rtl28xxu: return demod reg page from driver cache [media] coda: enable MPEG-2 ES decoding [media] coda: don't start streaming without queued buffers [media] coda: hook up vidioc_prepare_buf [media] coda: relax coda_jpeg_check_buffer for trailing bytes [media] coda: make to_coda_video_device static [media] s5p-mfc: remove volatile attribute from MFC register addresses [media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void [media] s5p-mfc: use spinlock to protect MFC context [media] s5p-mfc: remove unnecessary callbacks [media] s5p-mfc: make queue cleanup code common [media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx [media] s5p-mfc: constify s5p_mfc_codec_ops structures [media] au8522: Avoid memory leak for device config data [media] ir-lirc-codec.c: don't leak lirc->drv-rbuf [media] uvcvideo: small cleanup in uvc_video_clock_update() [media] uvcvideo: Fix reading the current exposure value of UVC ...
2016-01-11Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPEPeter Hutterer1-3/+0
As of e0361b70175 ("Input: wacom_w8001 - split the touch and pen devices into two devices") the touch events aren't multiplexed over the same device anymore, the use of ABS_MT_TOOL_TYPE is superfluous. And even before then it only ever sent MT_TOOL_TYPE_FINGER anyway. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-10Input: gpio-keys - fix check for disabling unsupported keysDmitry Torokhov1-6/+23
Commit 4ea14a53d8f881034fa9e186653821c4e3d9a8fb ("Input: gpio-keys - report error when disabling unsupported key") tried let user know that they attempted to disable an unsupported key, unfortunately the check is wrong as it believes that all codes are invalid. Fix it by ensuring that keys that we try to disable are subset of keys (or switches) that device reports. Fixes: 4ea14a53d8f8 ("Input: gpio-keys - report error when disabling unsupported key") Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: omap-keypad - remove dead checkDmitry Torokhov1-8/+0
Commit da1f026b532ce944d74461497dc6d8c16456466e ("Keyboard: omap-keypad: use matrix_keypad.h") switched the driver to use matrix keypad infrastructure, which made array of keycodes to be unsigned short, and caused the test for negativity never trigger. This leads to the following static checker warning: drivers/input/keyboard/omap-keypad.c:158 omap_kp_tasklet() warn: 'keycodes[]' is never negative. Given that we did not care about this check for a few years already let's simply remove it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: ti_am335x_tsc - fix HWPEN interrupt handlingDave Gerlach1-2/+0
Remove write to REG_IRQCLR and REG_IRQWAKEUP in interrupt handler for IRQENB_HW_PEN as the resume handler should and does clear REG_IRQWAKEUP. IRQENB_HW_PEN bit is set in irqclr so that all interrupts get cleared later so let IRQENB_HW_PEN be cleared by that. Without this patch wakeup events from TSC_ADC do not work because pending interrupts in TSC_ADC were causing HW_PEN interrupt, needed for wake from suspend modes, to get disabled immediately by IRQ handler after being enabled and preventing wake from happening. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: omap-keypad - set tasklet data earlierDan Carpenter1-1/+1
It feels like we should set the tasklet data before enabling it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: rohm_bu21023 - fix handling of retrying firmware updateDmitry Torokhov1-1/+1
Because of the wrong condition we'd never retry firmware update. Acked-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-06Merge branch 'goodix' into nextDmitry Torokhov2-41/+473
Merge several improvements to Goodix touchscreen driver: - power management support - configuration upload - axis swapping and inversion
2016-01-06Input: ALPS - report v3 pinnacle trackstick device only if is presentPali Rohár1-5/+7
This patch moves v3 pinnacle code for trackstick detection from alps_hw_init_v3() to alps_set_protocol() so ALPS_DUALPOINT flag can be cleared before registering trackstick input device in kernel. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-06Input: ALPS - detect trackstick presence for v7 protocolPali Rohár1-4/+8
This patch adds detection of trackstick for v7 protocol devices. Code in this patch is used in official Dell touchpad linux drivers for Dell models: Dell Latitude E5250/5250, E5450/5450, E5550/5550 Detection code and base reg for alps v3 rushmore and v7 devices is exacly same. Also user in bug https://bugzilla.kernel.org/show_bug.cgi?id=94801 reported that Toshiba Sattellite Z30-A-1DG has only alps v7 touchpad device without trackstick and kernel reports to userspace also redundant trackstick device. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-02Input: pcap_ts - use to_delayed_workGeliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-02Input: bma150 - constify bma150_cfg structureJulia Lawall1-1/+1
The bma150_cfg structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-02Input: i8042 - add Fujitsu Lifebook U745 to the nomux listAurélien Francillon1-0/+7
Without i8042.nomux=1 the Elantech touch pad is not working at all on a Fujitsu Lifebook U745. This patch does not seem necessary for all U745 (maybe because of different BIOS versions?). However, it was verified that the patch does not break those (see opensuse bug 883192: https://bugzilla.opensuse.org/show_bug.cgi?id=883192). Signed-off-by: Aurélien Francillon <aurelien@francillon.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-21Drivers: hv: vmbus: fix the building warning with hyperv-keyboardDexuan Cui1-10/+0
With the recent change af3ff643ea91ba64dd8d0b1cbed54d44512f96cd (Drivers: hv: vmbus: Use uuid_le type consistently), we always get this warning: CC [M] drivers/input/serio/hyperv-keyboard.o drivers/input/serio/hyperv-keyboard.c:427:2: warning: missing braces around initializer [-Wmissing-braces] { HV_KBD_GUID, }, ^ drivers/input/serio/hyperv-keyboard.c:427:2: warning: (near initialization for .id_table[0].guid.b.) [-Wmissing-braces] The patch fixes the warning. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-19Input: egalax_ts_serial - fix potential NULL dereference on errorDan Carpenter1-1/+1
We didn't check input_allocate_device() for failures so it could lead to a NULL deref. Fixes: 6b0f8f9c52ef ('Input: add eGalaxTouch serial touchscreen driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-19Merge branch 'for-linus' of ↵Linus Torvalds10-11/+64
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - fix wake-on-touch Input: elan_i2c - set input device's vendor and product IDs Input: sun4i-lradc-keys - fix typo in binding documentation Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload Input: arizona-haptic - fix disabling of haptics device Input: aiptek - fix crash on detecting device without endpoints Input: atmel_mxt_ts - add generic platform data for Chromebooks Input: parkbd - clear unused function pointers Input: walkera0701 - clear unused function pointers Input: turbografx - clear unused function pointers Input: gamecon - clear unused function pointers Input: db9 - clear unused function pointers
2015-12-18Input: uinput - sanity check on ff_effects_max and EV_FFElias Vanderstuyft1-0/+7
Currently the user can set ff_effects_max to zero with the EV_FF bit (and the FF_GAIN and/or FF_AUTOCENTER bits) set, in this case the uninitialized methods ff->set_gain and/or ff->set_autocenter can be dereferenced, resulting in a kernel oops. Check in uinput_create_device() and print a helpful message and return -EINVAL in case the check fails. Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18Input: uinput - rework ABS validationDavid Herrmann1-44/+45
Rework the uinput ABS validation to check passed absinfo data immediately, but do ABS initialization as last step in UI_DEV_CREATE. The behavior observed by user-space is not changed, as ABS initialization was never checked for errors. With this in place, the order of device initialization and abs configuration is no longer fixed. Userspace can initialize the device and afterwards set absinfo just fine. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctlBenjamin Tissoires1-3/+83
This adds two new ioctls, UINPUT_DEV_SETUP and UI_ABS_SETUP, that replaces the old device setup method (by write()'ing "struct uinput_user_dev" to the node). The old method is not easily extendable and requires huge payloads. Furthermore, overloading write() without properly versioned objects is error-prone. Therefore, we introduce two new ioctls to replace the old method. These ioctls support all features of the old method, plus a "resolution" field for absinfo. Furthermore, it's properly forward-compatible to new ABS codes and a growing "struct input_absinfo" structure. UI_ABS_SETUP also allows user-space to skip unknown axes if not set. There is no need to copy the whole array temporarily into the kernel, but instead the caller issues several ioctl where we copy each value manually. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18Input: elants_i2c - fix wake-on-touchJames Chen1-9/+12
When sending "SLEEP" command to the controller it ceases scanning completely and is unable to wake the system up from sleep, so if it is configured as a wakeup source we should simply configure interrupt for wakeup and rely on idle logic within the controller to reduce power consumption while it is not used. Signed-off-by: James Chen <james.chen@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18[media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung1-1/+1
Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] vb2: drop v4l2_format argument from queue_setupHans Verkuil1-6/+5
The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-17Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen"Karsten Merker1-8/+4
The goodix touchscreen driver uses a "rotated_screen" flag for systems on which the touchscreen is mounted rotated by 180 degrees with respect to the display. With the addition of support for the dt properties "touchscreen-inverted-x" and "touchscreen-inverted-y", a separate "rotated_screen" flag is not necessary anymore. This patch replaces it by setting the inverted_x and inverted_y flags instead. Signed-off-by: Karsten Merker <merker@debian.org> Reviewed-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - add axis swapping and axis inversion supportKarsten Merker1-0/+25
Implement support for the following device-tree and ACPI 5.1 DSD properties in the goodix touchscreen driver: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) These are necessary on tablets which have a display in portrait format while the touchscreen is in landscape format, such as e.g. the MSI Primo 81. Signed-off-by: Karsten Merker <merker@debian.org> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Irina Tirdea <irina.tirdea@intel.com> (with ACPI DSD properties) Tested-by: Aleksei Mamlin <mamlinav@gmail.com> (with device-tree properties) Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_sendIrina Tirdea1-6/+1
Use goodix_i2c_write_u8 instead of i2c_master_send to simplify code. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - add power management supportIrina Tirdea1-5/+98
Implement suspend/resume for goodix driver. The suspend and resume process uses the gpio pins. If the device ACPI/DT information does not declare gpio pins, suspend/resume will not be available for these devices. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - write configuration data to deviceIrina Tirdea1-32/+212
Goodix devices can be configured by writing custom data to the device at init. The configuration data is read with request_firmware from "goodix_<id>_cfg.bin", where <id> is the product id read from the device (e.g.: goodix_911_cfg.bin for Goodix GT911, goodix_9271_cfg.bin for GT9271). The configuration information has a specific format described in the Goodix datasheet. It includes X/Y resolution, maximum supported touch points, interrupt flags, various sensitivity factors and settings for advanced features (like gesture recognition). Before writing the firmware, it is necessary to reset the device. If the device ACPI/DT information does not declare gpio pins (needed for reset), writing the firmware will not be available for these devices. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - reset device at initIrina Tirdea2-0/+120
After power on, it is recommended that the driver resets the device. The reset procedure timing is described in the datasheet and is used at device init (before writing device configuration) and for power management. It is a sequence of setting the interrupt and reset pins high/low at specific timing intervals. This procedure also includes setting the slave address to the one specified in the ACPI/device tree. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). For reset the driver needs to control the interrupt and reset gpio pins (configured through ACPI/device tree). For devices that do not have the gpio pins properly declared, the functionality depending on these pins will not be available, but the device can still be used with basic functionality. For both device tree and ACPI, the interrupt gpio pin configuration is read from the "irq-gpios" property and the reset pin configuration is read from the "reset-gpios" property. For ACPI 5.1, named properties can be specified using the _DSD section. This functionality will not be available for devices that use indexed gpio pins declared in the _CRS section (we need to provide backward compatibility with devices that do not support using the interrupt gpio pin as output). For ACPI, the pins can be specified using ACPI 5.1: Device (STAC) { Name (_HID, "GDIX1001") ... Method (_CRS, 0, Serialized) { Name (RBUF, ResourceTemplate () { I2cSerialBus (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\I2C0", 0x00, ResourceConsumer, , ) GpioInt (Edge, ActiveHigh, Exclusive, PullNone, 0x0000, "\\I2C0", 0x00, ResourceConsumer, , ) { // Pin list 0 } GpioIo (Exclusive, PullDown, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\I2C0", 0x00, ResourceConsumer, , ) { 1 } }) Return (RBUF) } Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package (2) {"irq-gpios", Package() {^STAC, 0, 0, 0 }}, Package (2) {"reset-gpios", Package() {^STAC, 1, 0, 0 }}, ... } } Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - use actual config length for each device typeIrina Tirdea1-2/+25
Each of the Goodix devices supported by this driver has a fixed size for the configuration information registers. The size varies depending on the device and is specified in the datasheet. Use the proper configuration length as specified in the datasheet for each device model, so we do not read more than the actual size of the configuration registers. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Merge branch 'psmouse-passthrough' into nextDmitry Torokhov5-414/+392
Bring in changes to limit number of protocols we try on pass-though PS/2 ports so that probe ocmpletes faster.
2015-12-17Input: psmouse - rename ps2pp_init() to ps2pp_detect()Dmitry Torokhov3-4/+4
This makes Logitech PS2++ protocol implementation consistent with the naming in other protocols. Also mark the stub as "static inline" Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: psmouse - limit protocols that we try on passthrough portsDmitry Torokhov1-0/+10
PS/2 protocol is slow, and using it with pass-through port (where we encapsulate PS/2 into PS/2) is slower yet so it takes quite a bit of time to do full protocol discovery for device attached to a pass-through port. However, so far we have not see anything but trackpoints or basic PS/2 mice on pass-through ports, so let's limit protocols that we probe there to Trackpoint, IntelliMouse Explorer, IntelliMouse, and bare PS/2 protocol, and avoid other extended protocols, such as Synaptics, ALPS, etc. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: psmouse - factor out common protocol probing codeDmitry Torokhov1-78/+86
In preparation of limiting protocols that we try on pass-through ports, let's rework initialization code and factor common code into psmouse_try_protocol() that accepts protocol type (instead of detec() function pointer) and can, for most protocols, perform both detection and initialization. Note that this removes option of forcing Lifebook protocol on devices that are not recognized by lifebook_detect() as having the hardware, but I do not recall anyone using this option. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: psmouse - move protocol descriptions aroundDmitry Torokhov1-190/+189
We move protocol descriptions and psmouse_find_by_type() and pmouse_find_by_name() so that we can use them without forward declarations in the subsequent patches. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: psmouse - clean up Cypress probeDmitry Torokhov1-12/+8
When Cypress protocol support is disabled cypress_init() is a stub that always returns -ENOSYS, so there is not point in testing for CONFIG_MOUSE_PS2_CYPRESS after we decided that we are dealing with a Cypress device. Also, we should only be calling cypress_detect() when set_properties argument is "true", like with other protocols. There is a slight change in behavior to make follow-up patches more uniform: when we detect Cypress but its initialization fails, instead of immediately returning PSMOUSE_PS2 protocol we now continue trying IntelliMouse [Explorer]. Given that Cypress devices only have issue with Sentelic probes probing Imtellimouse should be safe. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: psmouse - rearrange Focaltech init codeDmitry Torokhov3-27/+26
The fact that we were calling focaltech_init() even when Focaltech support is disabled was confusing. Rearrange the code so that if support is disabled we continue to fall through the rest of protocol probing code until we get to full reset that Focaltech devices need to work properly. Also, replace focaltech_init() with a stub now that it is only called when protocol is enabled. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: psmouse - fix comment styleDmitry Torokhov1-155/+124
The module was using non-standard comment style with comment blocks often starting at the very beginning of a line instead of being aligned with the code. Let's switch to standard formatting. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: psmouse - use switch statement in psmouse_process_byte()Dmitry Torokhov1-34/+31
Instead of a series mostly exclusive "if" statements testing protocol type of the mouse let's use "switch" statement. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-16Input: add touchscreen support for TS-4800Damien Riegel3-0/+233
On this board, the touchscreen, an ads7843, is not handled directly by Linux but by a companion FPGA. This FPGA is memory-mapped and the IP design is very similar to the mk712. This commit adds the support for this IP. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-16Input: add eGalaxTouch serial touchscreen driverBöszörményi Zoltán3-0/+205
There are two EETI touchscreen drivers in the kernel (eeti_ts and egalax_ts) but both are for I2C-connected panels. This is for a different, serial and not multi-touch touchscreen panel. The protocol documentation is at http://www.eeti.com.tw/pdf/Software%20Programming%20Guide_v2.0.pdf Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-15Input: elan_i2c - set input device's vendor and product IDsCharlie Mooney1-0/+3
Previously the "vendor" and "product" IDs for the elan_i2c driver simply reported 0000. This patch modifies the elan_i2c driver to include the Elan vendor ID and the touchpad's product id under input/input*/{vendor,product}. Specifically, this is to allow us to apply a generic Elan gestures config that will apply to all Elan touchpads on ChromeOS. These configs match to input devices in various ways, but one major way is by matching on vendor ID. Adding this patch allows the default Elan touchpad config to be applied to Elan touchpads in this kernel by matching on devices that have vendor ID 04f3. Note that product ID is also available via custom sysfs entry "product_id" as well. Signed-off-by: Charlie Mooney <charliemooney@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-12Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-pressSteve Twiss1-4/+4
Stop reporting KEY_SLEEP for a short key-press and report KEY_POWER instead This change applies to both DA9063 and DA9062 ONKEY drivers. A previous application used for testing by the developer required a KEY_SLEEP and KEY_POWER input_report_key event to distinguish between a short and long key-press of the power key. This is not the general convention and the typical solution is for KEY_POWER to be used in both cases: suspend and S/W power off. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-11Input: atmel_mxt_ts - add maxtouch to I2C table for module autoloadJavier Martinez Canillas1-0/+1
The Atmel maxtouch DT binding documents that the compatible string for the device is "atmel,maxtouch" and the I2C core always reports a module alias of the form i2c:alias where alias is the compatible string model: $ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent MODALIAS=i2c:maxtouch But there isn't maxtouch entry in the I2C device ID table so when the i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the alias with a module to load: $ modinfo atmel_mxt_ts | grep alias alias: of:N*T*Catmel,maxtouch alias: i2c:mXT224 alias: i2c:atmel_mxt_tp alias: i2c:atmel_mxt_ts alias: i2c:qt602240_ts So add the maxtouch entry to the I2C device ID table to allow the module to be autoloaded when the device is registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-04Input: pixcir_i2c - add support for wake and enable gpiosSander Vermin1-0/+41
On some devices the wake and enable pins of the pixcir touchscreen controller are connected to gpios and these must be controlled by the driver for the device to operate properly. Signed-off-by: Sander Vermin <sander@vermin.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-03Input: wacom_w8001 - split the touch and pen devices into two devicesPeter Hutterer1-51/+116
These devices have a pen device and a touch device through the same serial protocol, split it up into two separate devices like we do for USB Wacom tablets too. Userspace already matches on the device name so we can't drop it completely. Compose the same basename based on capabilities and append the tool type, leading to a name like "Wacom Serial Penabled 2FG Touchscreen Pen". Note that this drops BTN_TOOL_FINGER, it is not needed once the tools are split out (and a touch device with BTN_TOOL_FINGER is interpreted as touchpad by most of userspace). Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-03Input: wacom_w8001 - split pen and touch initialization upPeter Hutterer1-83/+111
This is preparation work for splitting it up for two event nodes. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-11 10:26:11 +0000