summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2013-03-09Atmel MXT touchscreen: increase reset timeoutsLinus Torvalds1-2/+2
There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-08Input: atmel_mxt_ts - Support for touchpad variantDaniel Kurtz1-2/+62
This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-03Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull second set of s390 patches from Martin Schwidefsky: "The main part of this merge are Heikos uaccess patches. Together with commit 09884964335e ("mm: do not grow the stack vma just because of an overrun on preceding vma") the user string access is hopefully fixed for good. In addition some bug fixes and two cleanup patches." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/module: fix compile warning qdio: remove unused parameters s390/uaccess: fix kernel ds access for page table walk s390/uaccess: fix strncpy_from_user string length check input: disable i8042 PC Keyboard controller for s390 s390/dis: Fix invalid array size s390/uaccess: remove pointless access_ok() checks s390/uaccess: fix strncpy_from_user/strnlen_user zero maxlen case s390/uaccess: shorten strncpy_from_user/strnlen_user s390/dasd: fix unresponsive device after all channel paths were lost s390/mm: ignore change bit for vmemmap s390/page table dumper: add support for change-recording override bit
2013-03-02parisc: check return value of down_interruptible() in hp_sdc_rtc.cHelge Deller1-3/+12
additionally comment out unused code (which may be used later) Signed-off-by: Helge Deller <deller@gmx.de>
2013-02-28input: disable i8042 PC Keyboard controller for s390Heiko Carstens1-1/+1
Just add s390 to the list of architectures that don't want this driver. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-24Merge tag 'mfd-3.9-1' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds2-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-20Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-4/+4
Pull device tree changes from Grant Likely: "All around device tree changes destined for v3.8. Aside from the documentation updates the highlights in this branch include: - Kbuild changes for using CPP with .dts files - locking fix from preempt_rt patchset - include DT alias names in device uevent - Selftest bugfixes and improvements - New function for counting phandles stanzas in a property - constify argument to of_node_full_name() - Various bug fixes This tree did also contain a commit to use platform_device_add instead of open-coding the device add code, but it caused problems with amba devices and needed to be reverted." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits) Revert "of: use platform_device_add" kbuild: limit dtc+cpp include path gpio: Make of_count_named_gpios() use new of_count_phandle_with_args() of: Create function for counting number of phandles in a property of/base: Clean up exit paths for of_parse_phandle_with_args() of/selftest: Use selftest() macro throughout of/selftest: Fix GPIOs selftest to cover the 7th case of: fix recursive locking in of_get_next_available_child() documentation/devicetree: Fix a typo in exynos-dw-mshc.txt OF: convert devtree lock from rw_lock to raw spinlock of/exynos_g2d: Add Bindings for exynos G2D driver kbuild: create a rule to run the pre-processor on *.dts files input: Extend matrix-keypad device tree binding devicetree: Move NS2 LEDs binding into LEDs directory of: use platform_device_add powerpc/5200: Fix size to request_mem_region() call documentation/devicetree: Fix typos of: add 'const' to of_node_full_name parameter of: Output devicetree alias names in uevent DT: add vendor prefixes for Renesas and Toshiba ...
2013-02-20Merge branch 'for-linus' of ↵Linus Torvalds34-1043/+3314
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2 touchpad and a big update to ALPS driver from Kevin Cernekee that adds support for "Rushmore" touchpads and paves way for adding support for "Dolphin" touchpads. There is also a new input driver for Goldfish emulator and also Android keyreset driver was folded into SysRq code. A few more drivers were updated with device tree bindings and others got some small cleanups and fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits) Input: cyttsp-spi - remove duplicate MODULE_ALIAS() Input: tsc2005 - add MODULE_ALIAS Input: tegra-kbc - require CONFIG_OF, remove platform data Input: synaptics - initialize pointer emulation usage Input: MT - do not apply filtering on emulated events Input: bma150 - make some defines public and fix some comments Input: bma150 - fix checking pm_runtime_get_sync() return value Input: ALPS - enable trackstick on Rushmore touchpads Input: ALPS - add support for "Rushmore" touchpads Input: ALPS - make the V3 packet field decoder "pluggable" Input: ALPS - move pixel and bitmap info into alps_data struct Input: ALPS - fix command mode check Input: ALPS - rework detection of Pinnacle AGx touchpads Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults() Input: ALPS - use function pointers for different protocol handlers Input: ALPS - rework detection sequence Input: ALPS - introduce helper function for repeated commands Input: ALPS - move alps_get_model() down below hw_init code Input: ALPS - copy "model" info into alps_data struct Input: ALPS - document the alps.h data structures ...
2013-02-19Merge branch 'next' into for-linusDmitry Torokhov34-1043/+3314
Prepare first set of updates for 3.9 merge window.
2013-02-18Merge branch 'for-linus' of ↵Linus Torvalds3-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Two small driver fixups and a documentation update for managed input devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix wacom_set_report retry logic Input: document that unregistering managed devices is not necessary Input: lm8323 - fix checking PWM interrupt status
2013-02-16Input: cyttsp-spi - remove duplicate MODULE_ALIAS()Dmitry Torokhov1-1/+0
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-16Input: tsc2005 - add MODULE_ALIASPali Rohár1-0/+1
This enables autoloading of tsc2005 driver when is compiled as a module. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-15Input: tegra-kbc - require CONFIG_OF, remove platform dataStephen Warren2-104/+93
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Platform data is therefore no longer required. Delete the header that defines it, and rework the driver to parse the device tree directly into struct tegra_kbc. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-15Input: synaptics - initialize pointer emulation usageHenrik Rydberg1-1/+1
To properly setup event parameters for emulated events, pass the appropriate flag to the slot initialization function. Also, all MT-related events should be setup before initialization. Incidentally, this solves the issue of doubly filtered pointer events. Reported-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-15Input: MT - do not apply filtering on emulated eventsHenrik Rydberg1-0/+1
The pointer emulation events are derived from contact values that have already been filtered, so send the emulated events as is. Reported-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-15Input: bma150 - make some defines public and fix some commentsMichael Trimarchi1-12/+0
Make the constants referring to range and bandwidth public so they can be used when initializing the platform data fields in the platform code. Fix also some comments regarding the unit of measurement to use for the range and bandwidth fields, the values are not actually expected to be in G or HZ, the code in bma150.c just uses the BMA150_RANGE_xxx and BMA150_BW_xxx constants like they are with no translation from actual values in G or HZ. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-15Input: bma150 - fix checking pm_runtime_get_sync() return valueMichael Trimarchi1-1/+1
When PM_RUNTIME is not defined, pm_runtime_get_sync() returns 1, see include/linux/pm_runtime.c::__pm_runtime_resume(), and the check of the return value was overlooking this, in this case bma150_open() would return 1 which is not expected by upper layers. Maybe the check for != -ENOSYS (Function not implemented) was meant to cover this, but pm_runtime_get_sync() does not return this value. For now fix the issue locally by checking explicitly for negative return values. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - enable trackstick on Rushmore touchpadsKevin Cernekee1-70/+115
Separate out the common trackstick probe/setup sequences, then call them from each of the v3 init functions. Credits: Emmanual Thome furnished the information on the trackstick init and how it affected the report format. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - add support for "Rushmore" touchpadsKevin Cernekee1-0/+52
Rushmore touchpads are found on Dell E6230/E6430/E6530. They use the V3 protocol with slightly tweaked init sequences and report formats. The E7 report is 73 03 0a, and the EC report is 88 08 1d Credits: Emmanuel Thome reported the MT bitmap changes. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - make the V3 packet field decoder "pluggable"Kevin Cernekee2-44/+95
A number of different ALPS touchpad protocols can reuse alps_process_touchpad_packet_v3() with small tweaks to the bitfield decoding. Create a new priv->decode_fields() callback that handles the per-model differences. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move pixel and bitmap info into alps_data structKevin Cernekee2-22/+33
Newer touchpads use different constants, so make them runtime- configurable. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - fix command mode checkKevin Cernekee1-1/+1
Pinnacle class devices should return "88 07 xx" or "88 08 xx" when entering command mode. If either the first byte or the second byte is invalid, return an error. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - rework detection of Pinnacle AGx touchpadsKevin Cernekee1-3/+12
The official ALPS driver uses the EC report, not the E7 report, to detect these devices. Also, they check for a range of values; the original table-based code only checked for two specific ones. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults()Kevin Cernekee1-8/+4
This allows alps_identify() to override these settings based on the device characteristics, if it is ever necessary. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - use function pointers for different protocol handlersKevin Cernekee2-54/+54
In anticipation of adding more ALPS protocols and more per-device quirks, use function pointers instead of switch statements to call functions that differ from one device to the next. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - rework detection sequenceKevin Cernekee2-76/+56
If the E6 report test passes, get the E7 and EC reports right away and then try to match an entry in the table. Pass in the alps_data struct, so that the detection code will be able to set operating parameters based on information found during detection. Change the version (psmouse->model) to report the protocol version only, in preparation for supporting models that do not show up in the ID table. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - introduce helper function for repeated commandsKevin Cernekee1-41/+30
Several ALPS driver init sequences repeat a command three times, then issue PSMOUSE_CMD_GETINFO to read the result. Move this into a helper function to simplify the code. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move alps_get_model() down below hw_init codeKevin Cernekee1-93/+93
This will minimize the number of forward declarations needed when alps_get_model() starts assigning function pointers. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - copy "model" info into alps_data structKevin Cernekee2-34/+43
Not every type of ALPS touchpad is well-suited to table-based detection. Start moving the various alps_model_data attributes into the alps_data struct so that we don't need a unique table entry for every possible permutation of protocol version, flags, byte0/mask0, etc. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - document the alps.h data structuresKevin Cernekee1-13/+61
Add kernel-doc markup. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13Input: wacom - add support for DTH-2242Ping Cheng2-1/+25
It is a pen with 10 finger touch device. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13Input: cyapa - add support for smbus protocolBenson Leung1-5/+174
This patch adds support for the Cypress APA Smbus Trackpad type, which uses a modified register map that fits within the limitations of the smbus protocol. Devices that use this protocol include: CYTRA-116001-00 - Samsung Series 5 550 Chromebook trackpad CYTRA-103002-00 - Acer C7 Chromebook trackpad CYTRA-101003-00 - HP Pavilion 14 Chromebook trackpad Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Benson Leung <bleung@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13Input: synaptics - fix 1->3 contact transition reportingDaniel Kurtz1-3/+27
Investigating the following gesture highlighted two slight implementation errors with choosing which slots to report in which slot when multiple contacts are present: Action SGM AGM (MTB slot:Contact) 1. Touch contact 0 (0:0) 2. Touch contact 1 (0:0, 1:1) 3. Lift contact 0 (1:1) 4. Touch contacts 2,3 (0:2, 1:3) In step 4, slot 1 was not being cleared first, which means the same tracking ID was being used for reporting both the old contact 1 and the new contact 3. This could result in "drumroll", where the old contact 1 would appear to suddenly jump to new finger 3 position. Similarly, if contacts 2 & 3 are not detected at the same sample, step 4 is split into two: Action SGM AGM (MTB slot:contact) 1. Touch contact 0 (0:0) 2. Touch contact 1 (0:0, 1:1) 3. Lift contact 0 (1:1) 4. Touch contact 2 (0:2, 1:1) 5. Touch contact 3 (0:2, 1:3) In this case, there was also a bug. In step 4, when contact 1 moves from SGM to AGM and contact 2 is first reported in SGM, slot 0 was actually empty. So slot 0 can be used to report the new SGM (contact 0), immediately. Since it was empty, contact 2 in slot 0 will get a new tracking ID. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13Input: add couple of missing GENERIC_HARDIRQS dependenciesHeiko Carstens4-4/+5
When removing the !S390 dependency from drivers/input/Kconfig a couple of drivers don't compile because they have a dependency on GENERIC_HARDIRQS. So add the missing dependencies. Fixes e.g. this one: drivers/input/keyboard/lm8323.c: In function ‘lm8323_suspend’: drivers/input/keyboard/lm8323.c:801:2: error: implicit declaration of function ‘irq_set_irq_wake’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14mfd: max8925: Fix onkey driver irq baseQing Xu1-3/+0
update onkey driver's irq base, it should get from max8925, but not save in a private value Signed-off-by: Qing Xu <qingx@marvell.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-13gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()Grant Likely1-4/+4
This patch replaces the horribly coded of_count_named_gpios() with a call to of_count_phandle_with_args() which is far more efficient. This also changes the return value of of_gpio_count() & of_gpio_named_count() from 'unsigned int' to 'int' so that it can return an error code. All the users of that function are fixed up to correctly handle a negative return value. v2: Split GPIO portion into a separate patch Tested-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com>
2013-02-06input: drop unnecessary dependencies on TTYJoe Millenbach5-39/+2
Backing out changes made in earlier TTY removal patch. Switched to only one dependency in SERPORT on TTY instead of many incorrect dependencies. Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04drivers/input/joystick/analog.c: enable precise timerChris Metcalf1-1/+1
Like nm10300, tile can just use get_cycles() for this. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad1-1/+1
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-26ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki1-1/+1
The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-25Input: twl6040-vibra - use system workqueuePeter Ujfalusi1-10/+1
It is time to switch to system wq instead creating a queue for the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-25Input: twl6040-vibra - code cleanup in probe with devm_* conversionPeter Ujfalusi1-54/+45
Convert the probe to use devm_*. At the same time reorder the calls so we will register the input device as the last step when the driver is loaded. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-25Input: goldfish - virtual input event driverBrian Swetland3-0/+205
This device is a direct pipe from "hardware" to the input event subsystem, allowing us to avoid having to route "keypad" style events through an AT keyboard driver (gross!). As with the other submissions this driver is cross architecture. Signed-off-by: Mike A. Chan <mikechan@google.com> [Tided up to work on x86] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [Ported to 3.4] Signed-off-by: Tom Keel <thomas.keel@intel.com> [Cleaned up for 3.7 and submission] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-23Input: wacom - fix wacom_set_report retry logicChris Bagwell1-3/+3
Logic sets a value and then reads it back to make sure it worked and retries write on failures. Since read and write share a buffer, it needs to be set back up before writing though. Issue is not seen a lot because 1) it doesn't need to retry for a lot of tablets and 2) a lot of failures that need a retry are from an -ETIMEDOUT and hopefully buffer is not touched in this case. At least one user has shown logs with buffer being modified during -ETIMEDOUT case with linux 3.7 kernel. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-22Input: Convert to devm_ioremap_resource()Thierry Reding2-8/+7
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21Input: walkera0701 - claim parport when opening the deviceDmitry Torokhov1-10/+6
Postpone claiming the port until the device is opened, instead of doing that when the driver is loaded. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>