summaryrefslogtreecommitdiffstats
path: root/drivers/input/rmi4
AgeCommit message (Collapse)AuthorFilesLines
2017-01-31Input: synaptics-rmi4 - add sysfs attribute update_fw_statusNick Dyer3-27/+80
The attribute returns the percentage complete. If the firmware update fails, it reports a negative error code. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: synaptics-rmi4 - use local variables consistentlyGuenter Roeck2-4/+4
If a function declares a variable to access a structure element, use it conssistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: synaptics-rmi4 - correctly swap clip values if axes are swappedLucas Stach1-1/+6
The clip values need the same swapping as the maximum values if the sensor axes are swapped. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-29Input: synaptics-rmi4 - remove redundant null check on rmi_devColin Ian King1-3/+0
rmi_dev is currently being dereferenced before it null checked, however, after deeper inspecting, rmi_dev can never be null, so just remove this redundant check. Fixes CoverityScan CID 1391218 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-29Input: synaptics-rmi4 - check for non zero version logically dead codeColin Ian King1-2/+0
version is a u8, the check for version > 0 means that version can only be zero, so the subsequent check for version != 0 is never true and hence is redudant code and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-29Input: synaptics-rmi4 - use Kconfig "if" to express dependencyDmitry Torokhov1-16/+12
There is no need to repeat "depends on RMI4_CORE" on every bit of RMI4 support, we can guard all of them at once with "if RMI4_CORE". Also use tabs for F03 indentation. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-27Input: synaptics-rmi4 - fix F03 build error when serio is moduleDmitry Torokhov1-1/+2
Since F03 is a boolean, "depends" on symbols that can be modules do not work quite right. We can enable F03 if SERIO is built-in or if both RMI core and SERIO core are modules. If SERIO core is module, but RMI is built-in, we'll get: drivers/built-in.o: In function `rmi_f03_attention': rmi_f03.c:(.text+0xf8ef8): undefined reference to `serio_interrupt' rmi_f03.c:(.text+0xf8fbd): undefined reference to `serio_interrupt' drivers/built-in.o: In function `rmi_f03_remove': rmi_f03.c:(.text+0xf9082): undefined reference to `serio_unregister_port' drivers/built-in.o: In function `rmi_f03_probe': rmi_f03.c:(.text+0xf9260): undefined reference to `__serio_register_port' Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: synaptics-rmi4 - add support for F34 V7 bootloaderNick Dyer5-33/+1687
Port firmware update code from Samsung Galaxy S7 driver into mainline framework. This patch has been tested on Synaptics S7813. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-07Input: synaptics-rmi4 - fix debug for sensor clipNick Dyer1-5/+3
The debug would only ever output zero for the clip information. Signed-off-by: Nick Dyer <nick@shmanahar.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - store the attn data in the driverBenjamin Tissoires5-41/+43
Now that we have a proper API to set the attention data, there is no point in keeping it in the transport driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - allow to add attention dataBenjamin Tissoires1-2/+47
The HID implementation of RMI4 provides the data during the interrupt (in the input report). We need to provide a way for this transport driver to provide the attention data while calling an IRQ. We use a fifo in rmi_core to not lose any incoming event. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - f03 - grab data passed by transport deviceDennis Wassenberg1-9/+26
First check if there are data available passed by the transport device. If data available use these data. If there are no data available try to read the rmi block if dsata are passed this way. This is the way the other rmi function handlers will do this. This patch is needed on HID devices because the firmware reads F03 data registers and adds them to the HID attention report. Reading those registers from the driver after the firmware read them will result in invalid data. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - add support for F03Lyude Paul5-0/+246
This adds basic functionality for PS/2 passthrough on Synaptics Touchpads using RMI4 through smbus. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Lyude Paul <thatslyude@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - have only one struct platform dataBenjamin Tissoires3-9/+8
If struct rmi_device_platform_data contains pointers to other struct, it gets difficult to allocate a fixed size struct and copy it over between drivers. Change the pointers into a struct and change the code in rmi4 accordingly. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functionsBenjamin Tissoires2-16/+2
those functions should not be used outside of rmi_core.ko. There is no point in exporting them to the world. It looks like rmi_read_pdt_entry() should be static too. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - remove mutex calls while updating the firmwareBenjamin Tissoires2-37/+22
This partially reverts commit 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash") irq_mutex should be used only to protect data->current_irq_mask, not preventing incoming input to be processed while the upgrade of the firmware is happening. We can simply disable the irqs when we don't want them to interfere with the upgrade process. Tested on S7300 and S7800 (with F34 v7 patch added) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - add rmi_enable/disable_irqBenjamin Tissoires2-19/+66
Set the .enabled boolean and trigger an event processing when enabling for edge-triggered systems. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54Guenter Roeck3-4/+18
F54 diagnostics report functions provide data based on the number of enabled rx and tx electrodes, which is not identical to the number of electrodes reported with F54:Query0 and F54:Query1. Those values report the number of supported electrodes, not the number of enabled electrodes. The number of enabled electrodes can be determined by analyzing F55:Ctrl1 (sensor receiver assignment) and F55:Ctrl2 (sensor transmitter assignment). Propagate the number of enabled electrodes from F55 to F54 to avoid corrupted output if not all electrodes are enabled. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - add support for F55 sensor tuningGuenter Roeck5-0/+138
Sensor tuning support is needed to determine the number of enabled tx and rx electrodes for use in F54 functions. The number of enabled electrodes is not identical to the total number of electrodes as reported with F55:Query0 and F55:Query1. It has to be calculated by analyzing F55:Ctrl1 (sensor receiver assignment) and F55:Ctrl2 (sensor transmitter assignment). Support for additional sensor tuning functions may be added later. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - add support for F34 device reflashNick Dyer8-31/+668
Add support for updating firmware, triggered by a sysfs attribute. This patch has been tested on Synaptics S7300. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-16Input: synaptics-rmi4 - unlock on errorDan Carpenter1-2/+3
We should unlock before returning on this error path. Fixes: 3a762dbd5347 ('[media] Input: synaptics-rmi4 - add support for F54 diagnostics') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - add SMBus supportBenjamin Tissoires4-0/+472
Code obtained from https://raw.githubusercontent.com/mightybigcar/synaptics-rmi4/jf/drivers/input/rmi4/rmi_smbus.c and updated to match upstream. And fixed to make it work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - set the ABS_MT_TOOL_TYPE bit to report tool typeAndrew Duggan1-4/+6
The rmi4 2D sensor functions report the tool type via input_mt_report_slot_state(), but the abs parameter bit has not been set so the tool type is not reported to userspace. This patch set the ABS_MT_TOOL_TYPE bit. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - add support for controlling dribble packets in F12Andrew Duggan1-1/+69
Implements reading and setting the dribble bit in F12's control registers. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - add parameters for dribble packets and palm detect ↵Andrew Duggan3-7/+33
gesture The rmi_f11 driver currently disables dribble packets and the palm detect gesture for all devices. This patch creates a parameter in the 2d sensor platform data for controlling this functionality on a per device basis. For more information on dribble packets: Commit 05ba999fcabb ("HID: rmi: disable dribble packets on Synaptics touchpads") For more information on the palm detect gesture: Commit f097deef59a6 ("HID: rmi: disable palm detect gesture when present") Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - handle incomplete input dataAndrew Duggan3-20/+61
Commit 5b65c2a02966 ("HID: rmi: check sanity of the incoming report") added support for handling incomplete HID reports do to the input data being corrupted in transit. This patch reimplements this functionality in the function drivers so they can handle getting less valid data then they expect. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - move IRQ handling to rmi_driverBjorn Andersson3-140/+79
The attn IRQ is related to the chip, rather than the transport, so move all handling of interrupts to the core driver. This also makes sure that there are no races between interrupts and availability of the resources used by the core driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - add a couple of debug linesNick Dyer2-0/+4
Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - factor out functions from probeNick Dyer1-53/+86
Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: synaptics-rmi4 - stop scanning PDT after two empty pagesNick Dyer1-2/+14
We have encountered some RMI4 firmwares where there are blank pages in between PDT pages which contain functions. This change makes them correctly enumerate all functions on the device. Tested on S7817 (has empty page 2). Signed-off-by: Nick Dyer <nick@shmanahar.org> [Tested successfully on S7817 and S7300 Synaptics touch controllers] Tested-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-05Merge tag 'v4.8' into patchworkMauro Carvalho Chehab1-1/+2
Linux 4.8 * tag 'v4.8': (1761 commits) Linux 4.8 ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() MAINTAINERS: Switch to kernel.org email address for Javi Merino x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() x86/init: Fix cr4_init_shadow() on CR4-less machines MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS ...
2016-09-19[media] Input: v4l-touch - add copyright linesNick Dyer1-0/+1
Add copyright lines for Zodiac who paid for the V4L touch work. Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] Input: synaptics-rmi4: disallow impossible configurationArnd Bergmann1-1/+1
The newly added debug mode for the synaptics-rmi4 driver relies on the v4l2 interface and vb2_vmalloc, but those might be configured as loadable modules when the driver itself is built-in, resulting in a link failure: drivers/input/rmi4/rmi_core.o: In function `rmi_f54_remove': rmi_f54.c:(.text.rmi_f54_remove+0x14): undefined reference to `video_unregister_device' rmi_f54.c:(.text.rmi_f54_remove+0x20): undefined reference to `v4l2_device_unregister' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_s_input': rmi_f54.c:(.text.rmi_f54_vidioc_s_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_g_input': rmi_f54.c:(.text.rmi_f54_vidioc_g_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_fmt': rmi_f54.c:(.text.rmi_f54_vidioc_fmt+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_enum_input': rmi_f54.c:(.text.rmi_f54_vidioc_enum_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_querycap': ... The best workaround I could come up with is to disallow the debug mode unless it's actually possible to call it. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-23[media] Input: synaptics-rmi4 - add support for F54 diagnosticsNick Dyer5-0/+772
Function 54 implements access to various RMI4 diagnostic features. This patch adds support for retrieving this data. It registers a V4L2 device to output the data to user space. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: synaptics-rmi4 - fix register descriptor subpacket map constructionAndrew Duggan1-1/+2
The map_offset variable is specific to the register and needs to be reset in the loop. Otherwise, subsequent register's subpacket maps will have their bits set at the wrong index. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Nitin Chaudhary <nitinchaudhary1289@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-03Merge branch 'next' into for-linusDmitry Torokhov1-4/+1
Prepare second round of input updates for 4.8 merge window.
2016-07-26Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()Markus Elfring1-4/+1
The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-26Merge branch 'next' into for-linusDmitry Torokhov4-18/+60
Prepare first round of input updates for 4.8 merge window.
2016-07-19Input: synaptics-rmi4 - fix maximum size check for F12 control register 8Andrew Duggan1-4/+5
According to the RMI4 spec the maximum size of F12 control register 8 is 15 bytes. The current code incorrectly reports an error if control 8 is greater then 14. Making sensors with a control register 8 with 15 bytes unusable. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Chris Healy <cphealy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Merge branch 'for-linus' into nextDmitry Torokhov1-2/+2
Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.
2016-07-14Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in ↵Andrew Duggan1-2/+2
rmi_f11_rel_pos_report The size of relative data in F11 is already defined by RMI_F11_REL_BYTES. Use the define in rmi_f11_rel_pos_report() to be consistent. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove unneeded variableAndrew Duggan1-4/+1
Remove the data_base_addr_offset variable in rmi_f11_attention(). The f11 data is read as a single block so there is no need to store an offset to the data address. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove pointer to rmi_function in f12_dataAndrew Duggan1-1/+0
The pointer to struct rmi_function in f12_data is never set and was never used. The fn pointer is also stored in rmi_2d_sensor which is a member of f12_data. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcountAndrew Duggan1-2/+2
Calling of_find_node_by_name() assumes that the caller has incremented the refcount of the of_node being passed in. Currently, the caller is not incrementing the refcount of the of_node which results in the node being prematurely freed when of_find_node_by_name() calls of_node_put() on it. Instead use of_get_child_by_name() which does not call put on the of_node. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-13Input: synaptics-rmi4 - support regulator suppliesBjorn Andersson1-0/+46
Support the two supplies - vdd and vio - to make it possible to control power to the Synaptics chip. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19Input: synaptics-rmi4 - fix spelling in definesNick Dyer1-11/+11
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: synaptics-rmi4 - remove check of Non-NULL arrayAndrew Duggan1-3/+2
Originally the irq_mask member of rmi_function was a pointer. Then it was switched to being a zero length array. However, the checks for a NULL pointer where not removed. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-15Input: synaptics-rmi4 - using logical instead of bitwise ANDDan Carpenter1-2/+2
There is a typo so we have && instead of &. Fixes: ff8f83708b3e ('Input: synaptics-rmi4 - add support for 2D sensors and F11') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support to the SPI transport driverAndrew Duggan1-1/+43
Add devicetree binding for SPI devices. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add SPI transport driverAndrew Duggan3-0/+557
Add the transport driver for devices using RMI4 over SPI. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 04:43:23 +0000