summaryrefslogtreecommitdiffstats
path: root/drivers/input/misc
AgeCommit message (Collapse)AuthorFilesLines
2021-11-12Merge branch 'for-linus' of ↵Linus Torvalds10-12/+32
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just one new driver (Cypress StreetFighter touchkey), and no input core changes this time. Plus various fixes and enhancements to existing drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits) Input: iforce - fix control-message timeout Input: wacom_i2c - use macros for the bit masks Input: ili210x - reduce sample period to 15ms Input: ili210x - improve polled sample spacing Input: ili210x - special case ili251x sample read out Input: elantench - fix misreporting trackpoint coordinates Input: synaptics-rmi4 - Fix device hierarchy Input: i8042 - Add quirk for Fujitsu Lifebook T725 Input: cap11xx - add support for cap1206 Input: remove unused header <linux/input/cy8ctmg110_pdata.h> Input: ili210x - add ili251x firmware update support Input: ili210x - export ili251x version details via sysfs Input: ili210x - use resolution from ili251x firmware Input: pm8941-pwrkey - respect reboot_mode for warm reset reboot: export symbol 'reboot_mode' Input: max77693-haptic - drop unneeded MODULE_ALIAS Input: cpcap-pwrbutton - do not set input parent explicitly Input: max8925_onkey - don't mark comment as kernel-doc Input: ads7846 - do not attempt IRQ workaround when deferring probe Input: ads7846 - use input_set_capability() ...
2021-10-19Input: axp20x-pek - Use new soc_intel_is_cht() helperHans de Goede1-21/+5
Use the new soc_intel_is_cht() helper to find out if we are running on a CHT device rather then checking the ACPI _HRV field. This is more reliable (some CHT devices have been found where the _HRV for the PMIC is 2 rather then 3) and leads to a nice cleanup. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211018143324.296961-4-hdegoede@redhat.com
2021-10-16Input: pm8941-pwrkey - respect reboot_mode for warm resetShawn Guo1-1/+5
On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot device into bootloader and recovery mode. Instead of always doing hard reset, add a check on reboot_mode for possible warm reset. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210714095850.27185-3-shawn.guo@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: max77693-haptic - drop unneeded MODULE_ALIASKrzysztof Kozlowski1-1/+0
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210916170514.137977-1-krzysztof.kozlowski@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: cpcap-pwrbutton - do not set input parent explicitlyDmitry Torokhov1-1/+0
We are using devm_input_allocate_device() that already sets parent of the input device, there is no need to do that again. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/YWpiZqrfC9+GQsM4@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: max8925_onkey - don't mark comment as kernel-docRandy Dunlap1-1/+1
Change the comment to a normal (non-kernel-doc) comment to avoid these kernel-doc warnings: max8925_onkey.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * MAX8925 ONKEY driver max8925_onkey.c:2: warning: missing initial short description on line: * MAX8925 ONKEY driver Fixes: 3734574cac100 ("Input: enable onkey driver of max8925") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211002045943.9406-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: adxl34x - fix sparse warningDmitry Torokhov1-1/+1
This fixes the following warning from sparse: CC [M] drivers/input/misc/adxl34x.o CHECK drivers/input/misc/adxl34x.c drivers/input/misc/adxl34x.c:245:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:248:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:251:29: warning: cast to restricted __le16 Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/YWZIjb91d6aAwgss@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-12Input: adxl34x - make adxl34x_remove() return voidUwe Kleine-König4-6/+8
Up to now adxl34x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-6-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-01Input: ariel-pwrbutton - add SPI device ID tableMark Brown1-0/+7
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-05Input: palmas-pwrbutton - handle return value of platform_get_irq()Arvind Yadav1-0/+5
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-05Input: cpcap-pwrbutton - handle errors from platform_get_irq()Tang Bin1-1/+5
The function cpcap_power_button_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210802121740.8700-1-tangbin@cmss.chinamobile.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-08-30Input: remove dead CSR Prima2 PWRC driverLukas Bulwahn3-218/+0
Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig. Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210817072842.8640-1-lukas.bulwahn@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-23Input: pm8941-pwrkey - fix comma vs semicolon issueDmitry Torokhov1-1/+1
There is absolutely no reason to use comma operator in this code, 2 separate statements make much more sense. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/YPsa1qCBn/SAmE5x@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-19Input: ixp4xx-beeper - delete driverLinus Walleij3-196/+0
The NSLU2 has been migrated to devicetree and there we use the gpio-beeper.c driver instead, the boardfile will be deleted for kernel v5.15 so drop this custom and now unneeded driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210714115028.916360-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-18Merge tag 'v5.13' into nextDmitry Torokhov3-1/+317
Sync up with the mainline to get the latest parport API.
2021-06-19Input: ims-pcu - use kobj_to_dev()YueHaibing1-1/+1
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210607122533.10608-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheralDavid Collins1-31/+72
On Qualcomm Technologies, Inc. PMIC PMK8350, the PON peripheral is split into two peripherals: PON_HLOS and PON_PBS. The application processor only has write access to PON_HLOS which limits it to only receiving PON interrupts. Add support for the PMK8350 PON_HLOS peripheral so that its KPDPWR_N and RESIN_N interrupts can be used to detect key presses. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1620630064-16354-2-git-send-email-skakit@codeaurora.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-24Input: ims-pcu - replace some spaces with tabsShubhankar Kuranagatti1-2/+2
Unnecessary spaces have been replaced with tab space. This is done to maintain code uniformity. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210428091050.ryr7kxlxre7uhye4@kewl-virtual-machine Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-06Merge branch 'for-linus' of ↵Linus Torvalds5-8/+1852
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ...
2021-03-25Input: Add support for Azoteq IQS626AJeff LaBundy3-0/+1850
This patch adds support for the Azoteq IQS626A capacitive touch controller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: max8997 - simplify open coding of a division using up to 64 divisionsUwe Kleine-König1-7/+2
The for loop is just a complicate way to express a division. Replace it by the actual division which is both simpler to understand for a human and more efficient for a CPU to calculate. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210316212233.50765-1-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-19Input: ims-pcu - drop redundant driver-data assignmentJohan Hovold1-1/+0
The driver data for the data interface has already been set by usb_driver_claim_interface() so drop the subsequent redundant assignment. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210318155525.22496-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-10input: atc260x: Add onkey driver for ATC260x PMICsCristian Ciocaltea3-1/+317
The Actions Semi ATC260x PMICs are able to manage an onkey button. This driver exposes the ATC260x onkey as an input device. It can also be configured to force a system reset on a long key-press with an adjustable duration. The currently supported chip variants are ATC2603C and ATC2609A. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-02-22Merge tag 'v5.11' into nextDmitry Torokhov4-9/+18
Merge with mainline to get latest APIs and device tree bindings.
2021-01-11Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_tableSouptick Joarder1-6/+0
Kernel test robot throws below warning -> >> drivers/input/misc/ariel-pwrbutton.c:152:35: warning: unused variable >> 'ariel_pwrbutton_id_table' [-Wunused-const-variable] static const struct spi_device_id ariel_pwrbutton_id_table[] = { ^ 1 warning generated. Remove unused variable ariel_pwrbutton_id_table[] if no plan to use it further. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/1608581041-4354-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-18Input: da7280 - protect OF match table with CONFIG_OFDmitry Torokhov1-0/+2
The OF match table is only used when OF is enabled. Fixes: cd3f609823a5 ("Input: new da7280 haptic driver") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Roy Im <roy.im.opensource@diasemi.com> Link: https://lore.kernel.org/r/X9xRLVPt9eBi0CT6@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-15Input: da7280 - fix missing error testDmitry Torokhov1-0/+1
An "if" testing for error condition has accidentally been dropped from the code. Reported-by: kernel test robot <lkp@intel.com> Fixes: cd3f609823a5 ("Input: new da7280 haptic driver") Reviewed-by: Roy Im <Roy.Im.Opensource@diasemi.com> Link: https://lore.kernel.org/r/X9j8lGFgijzHyYZZ@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-14Merge branch 'next' into for-linusDmitry Torokhov15-49/+1622
Prepare input updates for 5.11 merge window.
2020-12-14Input: da7280 - fix spelling mistake "sequemce" -> "sequence"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201214223109.82924-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: sc27xx - add support for sc2730 and sc2721Nemo Han1-12/+59
Add new compatible strings and match data to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by: Nemo Han <nemo.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201117034949.47877-2-zhang.lyra@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: cm109 - do not stomp on control URBDmitry Torokhov1-2/+5
We need to make sure we are not stomping on the control URB that was issued when opening the device when attempting to toggle buzzer. To do that we need to mark it as pending in cm109_open(). Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: ipx4xx-beeper - convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085032.2598-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: new da7280 haptic driverRoy Im3-0/+1342
Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Signed-off-by: Roy Im <roy.im.opensource@diasemi.com> Reviewed-by: Jes Sorensen <Jes.Sorensen@gmail.com>. Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: add driver for power button on Dell Wyse 3020Lubomir Rintel3-0/+181
This adds support for the power button attached to the Embedded Controller on a Dell Wyse 3020 "Ariel" board. The Embedded Controller's SPI interface is actually capable sending and receiving the PS/2 keyboard and mouse protocol data, which looks like a good fit for a serio driver. Howerver, I don't know of any machines where this is actually used. My board only has a single power button and no way to connect an actual keyboard or a mouse. Using the atkbd driver with serio would be an overkill and would be inconvenient for the userspace. Therefore this driver registers an input device that is only capable of reporting the power button presses and releases. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.sk Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-06Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the ↵Hans de Goede1-0/+11
dmi_use_low_level_irq list Add the Lenovo Yoga Tablet2 1051L to the list of devices where the ACPI AML code is poking the GPIO config register directly changing the IRQ type to a low_level_irq, which we need to work around. This fixes the home button on the Lenovo Yoga Tablet2 1051L not working. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201206161245.24798-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02Input: use input_device_enabled()Andrzej Pietrasiewicz5-9/+9
Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-24Input: soc_button_array - add missing includeDmitry Torokhov1-0/+1
This fixes the following build errors: CC [M] drivers/input/misc/soc_button_array.o drivers/input/misc/soc_button_array.c:156:4: error: implicit declaration of function 'irq_set_irq_type' [-Werror,-Wimplicit-function-declaration] irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ^ drivers/input/misc/soc_button_array.c:156:26: error: use of undeclared identifier 'IRQ_TYPE_LEVEL_LOW' irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ^ 2 errors generated. Fixes: 78a5b53e9fb4 ("Input: soc_button_array - work around DSDTs which modify the irqflags") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201123061508.GA1009828@dtor-ws Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-22Input: pcspkr - fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/4b659e3e65f2fa3c8bb7ed153e2016c3fb395bbc.1605896059.git.gustavoars@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: wm831x-on - source file headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/input/misc/wm831x-on.c:30: warning: cannot understand function prototype: 'struct wm831x_on ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20201112110204.2083435-10-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: mc13783-pwrbutton - file headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/input/misc/mc13783-pwrbutton.c:32: warning: cannot understand function prototype: 'struct mc13783_pwrb ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-4-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: ab8500-ponkey - fix incorrect name in 'ab8500_ponkey' doc headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/input/misc/ab8500-ponkey.c:32: warning: Function parameter or member 'idev' not described in 'ab8500_ponkey' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-5-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: drv2667 - fix formatting and add missing member docsLee Jones1-6/+8
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'input_dev' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'client' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regmap' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'work' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regulator' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'page' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'magnitude' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'frequency' not described in 'drv2667_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-19-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: drv2665 - fix formatting expected by kernel-docLee Jones1-5/+5
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'input_dev' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'client' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regmap' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'work' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regulator' not described in 'drv2665_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-18-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: drv260x - fix kernel-doc formatting and remove one abuseLee Jones1-13/+13
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'input_dev' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'client' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regmap' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'work' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'enable_gpio' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regulator' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'magnitude' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'mode' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'library' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'rated_voltage' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'overdrive_voltage' not described in 'drv260x_data' drivers/input/misc/drv260x.c:244: warning: Function parameter or member 'voltage' not described in 'drv260x_calculate_voltage' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-17-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-26Input: adxl34x - clean up a data type in adxl34x_probe()Dan Carpenter1-1/+1
The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-13Input: soc_button_array - work around DSDTs which modify the irqflagsHans de Goede1-9/+60
Some 2-in-1s which use the soc_button_array driver have this ugly issue in their DSDT where the _LID method modifies the irq-type settings of the GPIOs used for the power and home buttons. The intend of this AML code is to disable these buttons when the lid is closed. The AML does this by directly poking the GPIO controllers registers. This is problematic because when re-enabling the irq, which happens whenever _LID gets called with the lid open (e.g. on boot and on resume), it sets the irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. This commit adds a workaround for this which (on affected devices) does not set gpio_keys_button.gpio on these 2-in-1s, instead it gets the irq for the GPIO, configures it as IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and passes the irq in gpio_keys_button.irq. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200906122016.4628-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-13Input: soc_button_array - add support for INT33D3 tablet-mode switch devicesHans de Goede1-0/+11
According to the Microsoft documentation for Windows 8 convertible devices, these devices should implement a PNP0C60 "laptop/slate mode state indicator" ACPI device. This device can work in 2 ways, if there is a GPIO which directly indicates the device is in tablet-mode or not then the direct-gpio mode should be used. If there is no such GPIO, but instead the events are coming from e.g. the embedded-controller, then there should still be a PNP0C60 ACPI device and event-injection should be used to send the events. The drivers/platform/x86/intel-vbtn.c code is an example from a standardized manner of doing the latter. On various 2-in-1s with either a detachable keyboard, or with 360° hinges, the direct GPIO mode is indicated by an ACPI device with a HID of INT33D3, which contains a single GpioInt in its ACPI resource table, which directly indicates if the device is in tablet-mode or not. This commit adds support for this to the soc_button_array code, as well as for the alternative ID9001 HID which some devices use instead of the INT33D3 HID. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200826150601.12137-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-13Input: soc_button_array - add active_low setting to soc_button_infoHans de Goede1-9/+11
This is a preparation patch for adding support for Intel INT33D3 ACPI devices. These INT33D3 devices follow yet another Intel defined (but not documented) ACPI GPIO button standard. Unlike the ACPI GPIO button devices supported so far, the GPIO used in the INT33D3 devices is active-high, rather then active-low. This commit makes setting the gpio_keys_button.active_low flag configurable through the soc_button_info struct and enables it for all currently supported devices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200826150601.12137-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-06Input: ims-pcu - return error code rather than -ENOMEMColin Ian King1-1/+1
Currently the assignment of -ENOMEM to error is redundant because error is not being read and -ENOMEM is being hard coded as an error return. Fix this by returning the error code in variable 'error'; this also allows the error code from a failed call to input_register_device to be preserved and returned to the caller rather than just returning a possibly inappropriate -ENOMEM. Kudos to Dan Carpenter for the suggestion of an improved fix. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200603152151.139337-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-21Input: ati_remote2 - add missing newlines when printing module parametersXiongfeng Wang1-2/+2
When I cat some module parameters by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask 0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask 0xffffroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-15 10:36:34 +0000