summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2014-04-28RDMA/cxgb4: Update Kconfig to include Chelsio T5 adapterHariprasad S1-3/+3
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-28RDMA/cxgb4: Only allow kernel db ringing for T4 devsSteve Wise1-0/+4
The whole db drop avoidance stuff is for T4 only. So we cannot allow that to be enabled for T5 devices. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-28RDMA/cxgb4: Force T5 connections to use TAHOE congestion controlSteve Wise2-0/+22
This is required to work around a T5 HW issue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-28RDMA/cxgb4: Fix endpoint mutex deadlocksSteve Wise3-15/+26
In cases where the cm calls c4iw_modify_rc_qp() with the endpoint mutex held, they must be called with internal == 1. rx_data() and process_mpa_reply() are not doing this. This causes a deadlock because c4iw_modify_rc_qp() might call c4iw_ep_disconnect() in some !internal cases, and c4iw_ep_disconnect() acquires the endpoint mutex. The design was intended to only do the disconnect for !internal calls. Change rx_data(), FPDU_MODE case, to call c4iw_modify_rc_qp() with internal == 1, and then disconnect only after releasing the mutex. Change process_mpa_reply() to call c4iw_modify_rc_qp(TERMINATE) with internal == 1 and set a new attr flag telling it to send a TERMINATE message. Previously this was implied by !internal. Change process_mpa_reply() to return whether the caller should disconnect after releasing the endpoint mutex. Now rx_data() will do the disconnect in the cases where process_mpa_reply() wants to disconnect after the TERMINATE is sent. Change c4iw_modify_rc_qp() RTS->TERM to only disconnect if !internal, and to send a TERMINATE message if attrs->send_term is 1. Change abort_connection() to not aquire the ep mutex for setting the state, and make all calls to abort_connection() do so with the mutex held. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds13-125/+268
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: - mostly cxgb4 fixes unblocked by the merge of some prerequisites via the net tree - drop deprecated MSI-X API use. - a couple other miscellaneous things. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Fix over-dereference when terminating RDMA/cxgb4: Use uninitialized_var() RDMA/cxgb4: Add missing debug stats RDMA/cxgb4: Initialize reserved fields in a FW work request RDMA/cxgb4: Use pr_warn_ratelimited RDMA/cxgb4: Max fastreg depth depends on DSGL support RDMA/cxgb4: SQ flush fix RDMA/cxgb4: rmb() after reading valid gen bit RDMA/cxgb4: Endpoint timeout fixes RDMA/cxgb4: Use the BAR2/WC path for kernel QPs and T5 devices IB/mlx5: Add block multicast loopback support IB/mthca: Use pci_enable_msix_exact() instead of pci_enable_msix() IB/qib: Use pci_enable_msix_range() instead of pci_enable_msix()
2014-04-12Merge branch 'for-next' of ↵Linus Torvalds3-203/+690
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the target pending updates for v3.15-rc1. Apologies in advance for waiting until the second to last day of the merge window to send these out. The highlights this round include: - iser-target support for T10 PI (DIF) offloads (Sagi + Or) - Fix Task Aborted Status (TAS) handling in target-core (Alex Leung) - Pass in transport supported PI at session initialization (Sagi + MKP + nab) - Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi) - Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab) - Fix tcm_fc use-after-free of ft_tpg (Andy Grover) - Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn) Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI metadata into KVM guest have been left-out for now, as there where a few comments from MST + Paolo that where not able to be addressed in time for v3.15. Please expect this feature for v3.16-rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits) ib_srpt: Use correct ib_sg_dma primitives target/tcm_fc: Rename ft_tport_create to ft_tport_get target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn target/tcm_fc: Rename structs and list members for clarity target/tcm_fc: Limit to 1 TPG per wwn target/tcm_fc: Don't export ft_lport_list target/tcm_fc: Fix use-after-free of ft_tpg target: Add check to prevent Abort Task from aborting itself target: Enable READ_STRIP emulation in target_complete_ok_work target/sbc: Add sbc_dif_read_strip software emulation target: Enable WRITE_INSERT emulation in target_execute_cmd target/sbc: Add sbc_dif_generate software emulation target/sbc: Only expose PI read_cap16 bits when supported by fabric target/spc: Only expose PI mode page bits when supported by fabric target/spc: Only expose PI inquiry bits when supported by fabric target: Pass in transport supported PI at session initialization target/iblock: Fix double bioset_integrity_free bug Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist target/rd: T10-Dif: RAM disk is allocating more space than required. iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug ...
2014-04-11ib_srpt: Use correct ib_sg_dma primitivesMike Marciniszyn1-6/+10
The code was incorrectly using sg_dma_address() and sg_dma_len() instead of ib_sg_dma_address() and ib_sg_dma_len(). This prevents srpt from functioning with the Intel HCA and indeed will corrupt memory badly. Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Vinod Kumar <vinod.kumar@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11Merge branches 'cxgb4', 'misc', 'mlx5' and 'qib' into for-nextRoland Dreier4-33/+44
2014-04-11RDMA/cxgb4: Fix over-dereference when terminatingSteve Wise1-1/+1
Need to get the endpoint reference before calling rdma_fini(), which might fail causing us to not get the reference. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Use uninitialized_var()Steve Wise1-1/+1
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Add missing debug statsSteve Wise2-2/+10
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Initialize reserved fields in a FW work requestSteve Wise1-0/+2
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Use pr_warn_ratelimitedHariprasad Shenai1-2/+2
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Max fastreg depth depends on DSGL supportSteve Wise3-3/+11
The max depth of a fastreg mr depends on whether the device supports DSGL or not. So compute it dynamically based on the device support and the module use_dsgl option. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: SQ flush fixSteve Wise2-17/+11
There is a race when moving a QP from RTS->CLOSING where a SQ work request could be posted after the FW receives the RDMA_RI/FINI WR. The SQ work request will never get processed, and should be completed with FLUSHED status. Function c4iw_flush_sq(), however was dropping the oldest SQ work request when in CLOSING or IDLE states, instead of completing the pending work request. If that oldest pending work request was actually complete and has a CQE in the CQ, then when that CQE is proceessed in poll_cq, we'll BUG_ON() due to the inconsistent SQ/CQ state. This is a very small timing hole and has only been hit once so far. The fix is two-fold: 1) c4iw_flush_sq() MUST always flush all non-completed WRs with FLUSHED status regardless of the QP state. 2) In c4iw_modify_rc_qp(), always set the "in error" bit on the queue before moving the state out of RTS. This ensures that the state transition will not happen while another thread is in post_rc_send(), because set_state() and post_rc_send() both aquire the qp spinlock. Also, once we transition the state out of RTS, subsequent calls to post_rc_send() will fail because the "in error" bit is set. I don't think this fully closes the race where the FW can get a FINI followed a SQ work request being posted (because they are posted to differente EQs), but the #1 fix will handle the issue by flushing the SQ work request. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: rmb() after reading valid gen bitSteve Wise1-0/+3
Some HW platforms can reorder read operations, so we must rmb() after we see a valid gen bit in a CQE but before we read any other fields from the CQE. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Endpoint timeout fixesSteve Wise1-33/+56
1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Use the BAR2/WC path for kernel QPs and T5 devicesSteve Wise4-33/+127
Signed-off-by: Steve Wise <swise@opengridcomputing.com> [ Fix cast from u64* to integer. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-10IB/mlx5: Add block multicast loopback supportEli Cohen2-0/+14
Add support for the block multicast loopback QP creation flag along the proper firmware API for that. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-10IB/mthca: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-6/+2
As result of the deprecation of the MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block(), all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-10IB/qib: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-27/+28
As result of the deprecation of the MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block(), all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-07target: Pass in transport supported PI at session initializationNicholas Bellinger2-1/+14
In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/iser: Use Fastreg only if device supports signatureSagi Grimberg1-1/+2
Fastreg is mandatory for signature, so if the device doesn't support it we don't need to use it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07iser-target: Add missing se_cmd put for WRITE_PENDING in tx_comp_errNicholas Bellinger1-11/+26
This patch fixes a bug where outstanding RDMA_READs with WRITE_PENDING status require an extra target_put_sess_cmd() in isert_put_cmd() code when called from isert_cq_tx_comp_err() + isert_cq_drain_comp_llist() context during session shutdown. The extra kref PUT is required so that transport_generic_free_cmd() invokes the last target_put_sess_cmd() -> target_release_cmd_kref(), which will complete(&se_cmd->cmd_wait_comp) the outstanding se_cmd descriptor with WRITE_PENDING status, and awake the completion in target_wait_for_sess_cmds() to invoke TFO->release_cmd(). The bug was manifesting itself in target_wait_for_sess_cmds() where a se_cmd descriptor with WRITE_PENDING status would end up sleeping indefinately. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Add TFO->abort_task for aborted task resources releaseNicholas Bellinger2-0/+28
Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung <amleung21@yahoo.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Vu Pham <vu@mellanox.com> Cc: Chris Boot <bootc@bootc.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07iser-target: Match FRMR descriptors to available session tagsNicholas Bellinger1-15/+23
This patch changes isert_conn_create_fastreg_pool() to follow logic in iscsi_target_locate_portal() for determining how many FRMR descriptors to allocate based upon the number of possible per-session command slots that are available. This addresses an OOPs in isert_reg_rdma() where due to the use of ISCSI_DEF_XMIT_CMDS_MAX could end up returning a bogus fast_reg_descriptor when the number of active tags exceeded the original hardcoded max. Note this also includes moving isert_conn_create_fastreg_pool() from isert_connect_request() to isert_put_login_tx() before posting the final Login Response PDU in order to determine the se_nacl->queue_depth (eg: number of tags) per session the target will be enforcing. v2 changes: - Move isert_conn->conn_fr_pool list_head init into isert_conn_request() v3 changes: - Drop unnecessary list_empty() check in isert_reg_rdma() (Sagi) Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/iser: Fail SCSI WRITE command if device detected integrity errorSagi Grimberg1-2/+6
If during data-transfer a data-integrity error was detected we must fail the command with CHECK_CONDITION and not execute the command. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/iser: Move check signature status to a functionSagi Grimberg1-65/+50
Remove code duplication from RDMA_READ and RDMA_WRITE completions that do basically the same check. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/iser: Consider DIF and RDMA_READ completions when calculating ↵Sagi Grimberg1-6/+41
post_send counter If protection is involved, iSER target must wait for completion of RDMA_READ before sending SCSI response. So we must consider that when calculating post_send_buf_count additions, also when processing good/error completions. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/iser: Fix signature work requests accountingSagi Grimberg1-0/+2
As REG_SIG_MR work request and it's LOCAL_INVALIDATE are not accounted in post_send_buf_count we must color these with ISER_FASTREG_LI_WRID in order to process their error completions when the QP flushes. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07IB/isert: Support T10-PI protected transactionsSagi Grimberg2-29/+311
In case the Target core passed transport T10 protection operation: 1. Register data buffer (data memory region) 2. Register protection buffer if exsists (prot memory region) 3. Register signature region (signature memory region) - use work request IB_WR_REG_SIG_MR 4. Execute RDMA 5. Upon RDMA completion check the signature status - if succeeded send good SCSI response - if failed send SCSI bad response with appropriate sense buffer (Fix up compile error in isert_reg_sig_mr, and fix up incorrect se_cmd->prot_type -> TARGET_PROT_NORMAL comparision - nab) (Fix failed sector assignment in isert_completion_rdma_* - Sagi + nab) (Fix enum assignements for protection type - Sagi) (Fix devision on 32-bit in isert_completion_rdma_* - Sagi + Fengguang) (Fix context change for v3.14-rc6 code - nab) (Fix iscsit_build_rsp_pdu inc_statsn flag usage - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07IB/isert: Accept RDMA_WRITE completionsSagi Grimberg1-2/+17
In case of protected transactions, we will need to check the protection status of the transaction before sending SCSI response. So be ready for RDMA_WRITE completions. currently we don't ask for these completions, but for T10-PI we will. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07IB/isert: Initialize T10-PI resourcesSagi Grimberg2-17/+110
Introduce pi_context to hold relevant RDMA protection resources. We eliminate data_key_valid boolean and replace it with indicators container to indicate: - Is the descriptor protected (registered via signature MR) - Is the data_mr key valid (can spare LOCAL_INV WR) - Is the prot_mr key valid (can spare LOCAL_INV WR) - Is the sig_mr key valid (can spare LOCAL_INV WR) Upon connection establishment check if network portal is T10-PI enabled and allocate T10-PI resources if necessary, allocate signature enabled memory regions and mark connection queue-pair as signature enabled. (Fix context change for v3.14-rc6 code - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07IB/isert: Introduce isert_map/unmap_data_bufSagi Grimberg2-125/+127
export map/unmap data buffer to a routine that may be used in various places in the code and keep the mapping data in a designated descriptor. Also, let isert_fast_reg_mr to decide weather to use global MR or do fast registration. This commit does not change any functionality. (Fix context change for v3.14-rc6 code - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-03Merge tag 'rdma-for-linus' of ↵Linus Torvalds72-1456/+4154
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.15: - The biggest change is core API extensions and mlx5 low-level driver support for handling DIF/DIX-style protection information, and the addition of PI support to the iSER initiator. Target support will be arriving shortly through the SCSI target tree. - A nice simplification to the "umem" memory pinning library now that we have chained sg lists. Kudos to Yishai Hadas for realizing our code didn't have to be so crazy. - Another nice simplification to the sg wrappers used by qib, ipath and ehca to handle their mapping of memory to adapter. - The usual batch of fixes to bugs found by static checkers etc. from intrepid people like Dan Carpenter and Yann Droneaud. - A large batch of cxgb4, ocrdma, qib driver updates" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits) RDMA/ocrdma: Unregister inet notifier when unloading ocrdma RDMA/ocrdma: Fix warnings about pointer <-> integer casts RDMA/ocrdma: Code clean-up RDMA/ocrdma: Display FW version RDMA/ocrdma: Query controller information RDMA/ocrdma: Support non-embedded mailbox commands RDMA/ocrdma: Handle CQ overrun error RDMA/ocrdma: Display proper value for max_mw RDMA/ocrdma: Use non-zero tag in SRQ posting RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr() RDMA/ocrdma: Increment abi version count RDMA/ocrdma: Update version string be2net: Add abi version between be2net and ocrdma RDMA/ocrdma: ABI versioning between ocrdma and be2net RDMA/ocrdma: Allow DPP QP creation RDMA/ocrdma: Read ASIC_ID register to select asic_gen RDMA/ocrdma: SQ and RQ doorbell offset clean up RDMA/ocrdma: EQ full catastrophe avoidance RDMA/cxgb4: Disable DSGL use by default RDMA/cxgb4: rx_data() needs to hold the ep mutex ...
2014-04-03Merge branches 'core', 'cxgb4', 'ip-roce', 'iser', 'misc', 'mlx4', 'nes', ↵Roland Dreier56-871/+2918
'ocrdma', 'qib', 'sgwrapper', 'srp' and 'usnic' into for-next
2014-04-03RDMA/ocrdma: Unregister inet notifier when unloading ocrdmaSelvin Xavier1-2/+14
Unregister the inet notifier during ocrdma unload to avoid a panic after driver unload. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Fix warnings about pointer <-> integer castsRoland Dreier1-3/+4
We should cast pointers to and from unsigned long to turn them into ints. Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Code clean-upDevesh Sharma7-47/+24
Clean up code. Also modifying GSI QP to error during ocrdma_close is fixed. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Display FW versionSelvin Xavier1-1/+41
Adding a sysfs file for getting the FW version. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Query controller informationSelvin Xavier8-2/+1135
Issue mailbox commands to query ocrdma controller information and phy information and print them while adding ocrdma device. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Support non-embedded mailbox commandsSelvin Xavier1-8/+47
Added a routine to issue non-embedded mailbox commands for handling large mailbox request/response data. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Handle CQ overrun errorSelvin Xavier1-1/+4
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Display proper value for max_mwSelvin Xavier3-1/+3
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Use non-zero tag in SRQ postingSelvin Xavier1-10/+18
As part of SRQ receive buffers posting we populate a non-zero tag which will be returned in SRQ receive completions. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr()Selvin Xavier1-2/+1
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Increment abi version countDevesh Sharma1-1/+1
Increment the ABI version count for driver/library interface. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Update version stringDevesh Sharma2-3/+5
Update the driver vrsion string and node description string Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: ABI versioning between ocrdma and be2netDevesh Sharma2-0/+2
While loading RoCE driver be2net driver should check for ABI version to catch functional incompatibilities. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Allow DPP QP creationDevesh Sharma1-2/+1
Allow creating DPP QP even if inline-data is not requested. This is an optimization to lower latency. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-27 23:50:01 +0000