summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2019-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
2019-09-26IB/hfi1: remove unlikely() from IS_ERR*() conditionDenis Efremov1-1/+1
"unlikely(IS_ERR_OR_NULL(x))" is excessive. IS_ERR_OR_NULL() already uses unlikely() internally. Link: http://lkml.kernel.org/r/20190829165025.15750-8-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Joe Perches <joe@perches.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds5-25/+5
Merge updates from Andrew Morton: - a few hot fixes - ocfs2 updates - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan, cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug, sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy, oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap, zsmalloc) * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits) mm/zsmalloc.c: fix a -Wunused-function warning zswap: do not map same object twice zswap: use movable memory if zpool support allocate movable memory zpool: add malloc_support_movable to zpool_driver shmem: fix obsolete comment in shmem_getpage_gfp() mm/madvise: reduce code duplication in error handling paths mm: mmap: increase sockets maximum memory size pgoff for 32bits mm/mmap.c: refine find_vma_prev() with rb_last() riscv: make mmap allocation top-down by default mips: use generic mmap top-down layout and brk randomization mips: replace arch specific way to determine 32bit task with generic version mips: adjust brk randomization offset to fit generic version mips: use STACK_TOP when computing mmap base address mips: properly account for stack randomization and stack guard gap arm: use generic mmap top-down layout and brk randomization arm: use STACK_TOP when computing mmap base address arm: properly account for stack randomization and stack guard gap arm64, mm: make randomization selected by generic topdown mmap layout arm64, mm: move generic mmap layout functions to mm arm64: consider stack randomization for mmap base only when necessary ...
2019-09-24mm/gup: add make_dirty arg to put_user_pages_dirty_lock()akpm@linux-foundation.org5-25/+5
[11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds79-1849/+2548
Pull RDMA subsystem updates from Jason Gunthorpe: "This cycle mainly saw lots of bug fixes and clean up code across the core code and several drivers, few new functional changes were made. - Many cleanup and bug fixes for hns - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed, bnxt_re, efa - Share the query_port code between all the iWarp drivers - General rework and cleanup of the ODP MR umem code to fit better with the mmu notifier get/put scheme - Support rdma netlink in non init_net name spaces - mlx5 support for XRC devx and DC ODP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA: Fix double-free in srq creation error flow RDMA/efa: Fix incorrect error print IB/mlx5: Free mpi in mp_slave mode IB/mlx5: Use the original address for the page during free_pages RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp" RDMA/hns: Package operations of rq inline buffer into separate functions RDMA/hns: Optimize cmd init and mode selection for hip08 IB/hfi1: Define variables as unsigned long to fix KASAN warning IB/{rdmavt, hfi1, qib}: Add a counter for credit waits IB/hfi1: Add traces for TID RDMA READ RDMA/siw: Relax from kmap_atomic() use in TX path IB/iser: Support up to 16MB data transfer in a single command RDMA/siw: Fix page address mapping in TX path RDMA: Fix goto target to release the allocated memory RDMA/usnic: Avoid overly large buffers on stack RDMA/odp: Add missing cast for 32 bit RDMA/hns: Use devm_platform_ioremap_resource() to simplify code Documentation/infiniband: update name of some functions RDMA/cma: Fix false error message RDMA/hns: Fix wrong assignment of qp_access_flags ...
2019-09-21Merge tag 'for-linus-hmm' of ↵Linus Torvalds10-390/+344
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is more cleanup and consolidation of the hmm APIs and the very strongly related mmu_notifier interfaces. Many places across the tree using these interfaces are touched in the process. Beyond that a cleanup to the page walker API and a few memremap related changes round out the series: - General improvement of hmm_range_fault() and related APIs, more documentation, bug fixes from testing, API simplification & consolidation, and unused API removal - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and make them internal kconfig selects - Hoist a lot of code related to mmu notifier attachment out of drivers by using a refcount get/put attachment idiom and remove the convoluted mmu_notifier_unregister_no_release() and related APIs. - General API improvement for the migrate_vma API and revision of its only user in nouveau - Annotate mmu_notifiers with lockdep and sleeping region debugging Two series unrelated to HMM or mmu_notifiers came along due to dependencies: - Allow pagemap's memremap_pages family of APIs to work without providing a struct device - Make walk_page_range() and related use a constant structure for function pointers" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits) libnvdimm: Enable unit test infrastructure compile checks mm, notifier: Catch sleeping/blocking for !blockable kernel.h: Add non_block_start/end() drm/radeon: guard against calling an unpaired radeon_mn_unregister() csky: add missing brackets in a macro for tlb.h pagewalk: use lockdep_assert_held for locking validation pagewalk: separate function pointers from iterator data mm: split out a new pagewalk.h header from mm.h mm/mmu_notifiers: annotate with might_sleep() mm/mmu_notifiers: prime lockdep mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports mm/hmm: hmm_range_fault() infinite loop mm/hmm: hmm_range_fault() NULL pointer bug mm/hmm: fix hmm_range_fault()'s handling of swapped out pages mm/mmu_notifiers: remove unregister_no_release RDMA/odp: remove ib_ucontext from ib_umem RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm' RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address ...
2019-09-20ipv4: Revert removal of rt_uses_gatewayDavid Ahern1-1/+1
Julian noted that rt_uses_gateway has a more subtle use than 'is gateway set': https://lore.kernel.org/netdev/alpine.LFD.2.21.1909151104060.2546@ja.home.ssi.bg/ Revert that part of the commit referenced in the Fixes tag. Currently, there are no u8 holes in 'struct rtable'. There is a 4-byte hole in the second cacheline which contains the gateway declaration. So move rt_gw_family down to the gateway declarations since they are always used together, and then re-use that u8 for rt_uses_gateway. End result is that rtable size is unchanged. Fixes: 1550c171935d ("ipv4: Prepare rtable for IPv6 gateway") Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-18Merge branch 'work.namei' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs namei updates from Al Viro: "Pathwalk-related stuff" [ Audit-related cleanups, misc simplifications, and easier to follow nd->root refcounts - Linus ] * 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: devpts_pty_kill(): don't bother with d_delete() infiniband: don't bother with d_delete() hypfs: don't bother with d_delete() fs/namei.c: keep track of nd->root refcount status fs/namei.c: new helper - legitimize_root() kill the last users of user_{path,lpath,path_dir}() namei.h: get the comments on LOOKUP_... in sync with reality kill LOOKUP_NO_EVAL, don't bother including namei.h from audit.h audit_inode(): switch to passing AUDIT_INODE_... filename_mountpoint(): make LOOKUP_NO_EVAL unconditional there filename_lookup(): audit_inode() argument is always 0
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds9-227/+58
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-16RDMA: Fix double-free in srq creation error flowJack Morgenstein1-1/+2
The cited commit introduced a double-free of the srq buffer in the error flow of procedure __uverbs_create_xsrq(). The problem is that ib_destroy_srq_user() called in the error flow also frees the srq buffer. Thus, if uverbs_response() fails in __uverbs_create_srq(), the srq buffer will be freed twice. Cc: <stable@vger.kernel.org> Fixes: 68e326dea1db ("RDMA: Handle SRQ allocations by IB/core") Link: https://lore.kernel.org/r/20190916071154.20383-5-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16RDMA/efa: Fix incorrect error printGal Pressman1-1/+1
The error print should indicate that it failed to get the queue attributes, not network attributes. Link: https://lore.kernel.org/r/20190910134301.4194-2-galpress@amazon.com Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com> Reviewed-by: Firas JahJah <firasj@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16IB/mlx5: Free mpi in mp_slave modeDanit Goldberg1-0/+1
ib_add_slave_port() allocates a multiport struct but never frees it. Don't leak memory, free the allocated mpi struct during driver unload. Cc: <stable@vger.kernel.org> Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE") Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.org Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16IB/mlx5: Use the original address for the page during free_pagesDanit Goldberg1-4/+5
The removal of 'buffer' in the patch below caused free_page() to use a value that had been offset since the wqe pointer is adjusted while the routine runs. The current implementation of free_pages() rounds down to a pfn, discarding the adjustment, but this is not the right way to use the API. Preserve the initial value and use it for free_page(). Fixes: 0f51427bd097 ("RDMA/mlx5: Cleanup WQE page fault handler") Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"Colin Ian King1-1/+1
There is a spelling mistake in a literal string, fix it. Fixes: 89f81008baac ("RDMA/bnxt_re: expose detailed stats retrieved from HW") Link: https://lore.kernel.org/r/20190911092856.11146-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16RDMA/hns: Package operations of rq inline buffer into separate functionsLijun Ou1-39/+56
Here packages the codes of allocating and freeing rq inline buffer in hns_roce_create_qp_common function in order to reduce the complexity. Link: https://lore.kernel.org/r/1567068102-56919-3-git-send-email-liweihang@hisilicon.com Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16RDMA/hns: Optimize cmd init and mode selection for hip08Yixian Liu2-13/+5
There are two modes for mailbox command (cmd) queue, i.e., event mode and poll mode. For each mode, we use corresponding semaphores to protect the cmd queue resource competition, so called event_sem and poll_sem. During cmd init, both semaphores are initialized and poll mode is selected. Thus, there is no need to up poll_sema again in cmd_use_polling. Furthermore, there is no need to down the sema of the other side while switching mode. This patch aims to decouple the switch between event mode and poll mode of cmd. Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/hfi1: Define variables as unsigned long to fix KASAN warningIra Weiny1-26/+19
Define the working variables to be unsigned long to be compatible with for_each_set_bit and change types as needed. While we are at it remove unused variables from a couple of functions. This was found because of the following KASAN warning: ================================================================== BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70 Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889 CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W 5.3.0-rc2-mm1+ #2 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] Call Trace: dump_stack+0x9a/0xf0 ? find_first_bit+0x19/0x70 print_address_description+0x6c/0x332 ? find_first_bit+0x19/0x70 ? find_first_bit+0x19/0x70 __kasan_report.cold.6+0x1a/0x3b ? find_first_bit+0x19/0x70 kasan_report+0xe/0x12 find_first_bit+0x19/0x70 pma_get_opa_portstatus+0x5cc/0xa80 [hfi1] ? ret_from_fork+0x3a/0x50 ? pma_get_opa_port_ectrs+0x200/0x200 [hfi1] ? stack_trace_consume_entry+0x80/0x80 hfi1_process_mad+0x39b/0x26c0 [hfi1] ? __lock_acquire+0x65e/0x21b0 ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? check_chain_key+0x1d7/0x2e0 ? lock_downgrade+0x3a0/0x3a0 ? match_held_lock+0x2e/0x250 ib_mad_recv_done+0x698/0x15e0 [ib_core] ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? ib_mad_send_done+0xc80/0xc80 [ib_core] ? mark_held_locks+0x79/0xa0 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? rvt_poll_cq+0x1e1/0x340 [rdmavt] __ib_process_cq+0x97/0x100 [ib_core] ib_cq_poll_work+0x31/0xb0 [ib_core] process_one_work+0x4ee/0xa00 ? pwq_dec_nr_in_flight+0x110/0x110 ? do_raw_spin_lock+0x113/0x1d0 worker_thread+0x57/0x5a0 ? process_one_work+0xa00/0xa00 kthread+0x1bb/0x1e0 ? kthread_create_on_node+0xc0/0xc0 ret_from_fork+0x3a/0x50 The buggy address belongs to the page: page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame: pma_get_opa_portstatus+0x0/0xa80 [hfi1] this frame has 1 object: [32, 36) 'vl_select_mask' Memory state around the buggy address: ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00 ^ ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 ================================================================== Cc: <stable@vger.kernel.org> Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/{rdmavt, hfi1, qib}: Add a counter for credit waitsKaike Wan5-16/+9
This patch adds a counter for credit waits to assist field debugging. Link: https://lore.kernel.org/r/20190911113047.126040.10857.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/hfi1: Add traces for TID RDMA READKaike Wan3-0/+51
This patch adds traces to debug packet loss and retry for TID RDMA READ protocol. Link: https://lore.kernel.org/r/20190911113041.126040.64541.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/siw: Relax from kmap_atomic() use in TX pathBernard Metzler1-7/+5
Since the transmit path is never executed in an atomic context, we do not need kmap_atomic() and can always use less demanding kmap(). Link: https://lore.kernel.org/r/20190909132945.30462-1-bmt@zurich.ibm.com Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13Merge tag 'v5.3-rc8' into rdma.git for-nextJason Gunthorpe23-240/+263
To resolve dependencies in following patches mlx5_ib.h conflict resolved by keeing both hunks Linux 5.3-rc8 Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/iser: Support up to 16MB data transfer in a single commandSergey Gorenko1-3/+4
Maximum supported IO size is 8MB for the iSER driver. The current value is limited by the ISCSI_ISER_MAX_SG_TABLESIZE macro. But the driver is able to handle 16MB IOs without any significant changes. Increasing this limit can be useful for the storage arrays which are fine tuned for IOs larger than 8 MB. This commit allows to configure maximum IO size up to 16MB using the max_sectors module parameter. Link: https://lore.kernel.org/r/20190912103534.18210-1-sergeygo@mellanox.com Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/siw: Fix page address mapping in TX pathBernard Metzler1-5/+6
Use the correct kmap()/kunmap() flow to determine page address used for CRC computation. Using page_address() is wrong, since page might be in highmem. Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Link: https://lore.kernel.org/r/20190909132427.30264-1-bmt@zurich.ibm.com Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA: Fix goto target to release the allocated memoryNavid Emamdoost1-1/+1
In bnxt_re_create_srq(), when ib_copy_to_udata() fails allocated memory should be released by goto fail. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/20190910222120.16517-1-navid.emamdoost@gmail.com Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/usnic: Avoid overly large buffers on stackArnd Bergmann1-2/+8
It's never a good idea to put a 1000-byte buffer on the kernel stack. The compiler warns about this instance when usnic_ib_log_vf() gets inlined into usnic_ib_pci_probe(): drivers/infiniband/hw/usnic/usnic_ib_main.c:543:12: error: stack frame size of 1044 bytes in function 'usnic_ib_pci_probe' [-Werror,-Wframe-larger-than=] As this is only called for debugging purposes in the setup path, it's trivial to convert to a dynamic allocation. Link: https://lore.kernel.org/r/20190906155730.2750200-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/odp: Add missing cast for 32 bitJason Gunthorpe1-1/+1
length is a size_t which is unsigned int on 32 bit: ../drivers/infiniband/core/umem_odp.c: In function 'ib_init_umem_odp': ../include/linux/overflow.h:59:15: warning: comparison of distinct pointer types lacks a cast 59 | (void) (&__a == &__b); \ | ^~ ../drivers/infiniband/core/umem_odp.c:220:7: note: in expansion of macro 'check_add_overflow' Fixes: 204e3e5630c5 ("RDMA/odp: Check for overflow when computing the umem_odp end") Link: https://lore.kernel.org/r/20190908080726.30017-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/hns: Use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Link: https://lore.kernel.org/r/20190906141727.26552-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/cma: Fix false error messageHåkon Bugge1-1/+1
In addr_handler(), assuming status == 0 and the device already has been acquired (id_priv->cma_dev != NULL), we get the following incorrect "error" message: RDMA CM: ADDR_ERROR: failed to resolve IP. status 0 Fixes: 498683c6a7ee ("IB/cma: Add debug messages to error flows") Link: https://lore.kernel.org/r/20190902092731.1055757-1-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-03Merge tag 'mlx5-updates-2019-09-01-v2' of ↵David S. Miller5-221/+50
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-09-01 (Software steering support) Abstract: -------- Mellanox ConnetX devices supports packet matching, packet modification and redirection. These functionalities are also referred to as flow-steering. To configure a steering rule, the rule is written to the device owned memory, this memory is accessed and cached by the device when processing a packet. Steering rules are constructed from multiple steering entries (STE). Rules are configured using the Firmware command interface. The Firmware processes the given driver command and translates them to STEs, then writes them to the device memory in the current steering tables. This process is slow due to the architecture of the command interface and the processing complexity of each rule. The highlight of this patchset is to cut the middle man (The firmware) and do steering rules programming into device directly from the driver, with no firmware intervention whatsoever. Motivation: ----------- Software (driver managed) steering allows for high rule insertion rates compared to the FW steering described above, this is achieved by using internal RDMA writes to the device owned memory instead of the slow command interface to program steering rules. Software (driver managed) steering, doesn't depend on new FW for new steering functionality, new implementations can be done in the driver skipping the FW layer. Performance: ------------ The insertion rate on a single core using the new approach allows programming ~300K rules per sec. (Done via direct raw test to the new mlx5 sw steering layer, without any kernel layer involved). Test: TC L2 rules 33K/s with Software steering (this patchset). 5K/s with FW and current driver. This will improve OVS based solution performance. Architecture and implementation details: ---------------------------------------- Software steering will be dynamically selected via devlink device parameter. Example: $ devlink dev param show pci/0000:06:00.0 name flow_steering_mode pci/0000:06:00.0: name flow_steering_mode type driver-specific values: cmode runtime value smfs mlx5 software steering module a.k.a (DR - Direct Rule) is implemented and contained in mlx5/core/steering directory and controlled by MLX5_SW_STEERING kconfig flag. mlx5 core steering layer (fs_core) already provides a shim layer for implementing different steering mechanisms, software steering will leverage that as seen at the end of this series. When Software Steering for a specific steering domain (NIC/RDMA/Vport/ESwitch, etc ..) is supported, it will cause rules targeting this domain to be created using SW steering instead of FW. The implementation includes: Domain - The steering domain is the object that all other object resides in. It holds the memory allocator, send engine, locks and other shared data needed by lower objects such as table, matcher, rule, action. Each domain can contain multiple tables. Domain is equivalent to namespaces e.g (NIC/RDMA/Vport/ESwitch, etc ..) as implemented currently in mlx5_core fs_core (flow steering core). Table - Table objects are used for holding multiple matchers, each table has a level used to prevent processing loops. Packets are being directed to this table once it is set as the root table, this is done by fs_core using a FW command. A packet is being processed inside the table matcher by matcher until a successful hit, otherwise the packet will perform the default action. Matcher - Matchers objects are used to specify the fields mask for matching when processing a packet. A matcher belongs to a table, each matcher can hold multiple rules, each rule with different matching values corresponding to the matcher mask. Each matcher has a priority used for rule processing order inside the table. Action - Action objects are created to specify different steering actions such as count, reformat (encapsulate, decapsulate, ...), modify header, forward to table and many other actions. When creating a rule a sequence of actions can be provided to be executed on a successful match. Rule - Rule objects are used to specify a specific match on packets as well as the actions that should be executed. A rule belongs to a matcher. STE - This layer is used to hold the specific STE format for the device and to convert the requested rule to STEs. Each rule is constructed of an STE chain, Multiple rules construct a steering graph. Each node in the graph is a hash table containing multiple STEs. The index of each STE in the hash table is being calculated using a CRC32 hash function. Memory pool - Used for managing and caching device owned memory for rule insertion. The memory is being allocated using DM (device memory) API. Communication with device - layer for standard RDMA operation using RC QP to configure the device steering. Command utility - This module holds all of the FW commands that are required for SW steering to function. Patch planning and files: ------------------------- 1) First patch, adds the support to Add flow steering actions to fs_cmd shim layer. 2) Next 12 patch will add a file per each Software steering functionality/module as described above. (See patches with title: DR, *) 3) Add CONFIG_MLX5_SW_STEERING for software steering support and enable build with the new files 4) Next two patches will add the support for software steering in mlx5 steering shim layer net/mlx5: Add API to set the namespace steering mode net/mlx5: Add direct rule fs_cmd implementation 5) Last two patches will add the new devlink parameter to select mlx5 steering mode, will be valid only for switchdev mode for now. Two modes are supported: 1. DMFS - Device managed flow steering 2. SMFS - Software/Driver managed flow steering. In the DMFS mode, the HW steering entities are created through the FW. In the SMFS mode this entities are created though the driver directly. The driver will use the devlink steering mode only if the steering domain supports it, for now SMFS will manages only the switchdev eswitch steering domain. User command examples: - Set SMFS flow steering mode:: $ devlink dev param set pci/0000:06:00.0 name flow_steering_mode value "smfs" cmode runtime - Read device flow steering mode:: $ devlink dev param show pci/0000:06:00.0 name flow_steering_mode pci/0000:06:00.0: name flow_steering_mode type driver-specific values: cmode runtime value smfs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-03net/mlx5: Add flow steering actions to fs_cmd shim layerMaor Gottlieb3-13/+20
Add flow steering actions: modify header and packet reformat to the fs_cmd shim layer. This allows each namespace to define possibly different functionality for alloc/dealloc action commands. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-03infiniband: don't bother with d_delete()Al Viro1-1/+1
Dentries are never retained there; d_delete() + dput() is no different from d_drop() + dput(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-11/+20
r8152 conflicts are the NAPI fixes in 'net' overlapping with some tasklet stuff in net-next Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02Merge branch 'mlx5-next' of ↵Saeed Mahameed4-208/+30
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Merge mlx5-next patches needed for upcoming mlx5 software steering. 1) Alex adds HW bits and definitions required for SW steering 2) Ariel moves device memory management to mlx5_core (From mlx5_ib) 3) Maor, Cleanups and fixups for eswitch mode and RoCE 4) Mark, Set only stag for match untagged packets Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-01net/mlx5: Move device memory management to mlx5_coreAriel Levkovich4-208/+30
Move the device memory allocation and deallocation commands SW ICM memory to mlx5_core to expose this API for all mlx5_core users. This comes as preparation for supporting SW steering in kernel where it will be required to allocate and register device memory for direct rule insertion. In addition, an API to register this device memory for future remote access operations is introduced using the create_mkey commands. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-28Merge branch 'mlx5-next' of ↵Saeed Mahameed2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5 HW spec and bits updates: 1) Aya exposes IP-in-IP capability in mlx5_core. 2) Maxim exposes lag tx port affinity capabilities. 3) Moshe adds VNIC_ENV internal rq counter bits. 4) ODP capabilities for DC transport Misc updates: 5) Saeed, two compiler warnings cleanups 6) Add XRQ legacy commands opcodes 7) Use refcount_t for refcount 8) fix a -Wstringop-truncation warning
2019-08-28RDMA/hns: Fix wrong assignment of qp_access_flagsLijun Ou1-2/+2
We used wrong shifts when set qp_attr->qp_access_flag, this patch exchange V2_QP_RRE_S and V2_QP_RWE_S to fix it. Fixes: 2a3d923f8730 ("RDMA/hns: Replace magic numbers with #defines") Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Link: https://lore.kernel.org/r/1566393276-42555-10-git-send-email-oulijun@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28RDMA/hns: Delete the not-used linesWenpeng Liang1-1/+0
Delete the assignment of srq->ibsrq.ext.xrc.srq_num, beacause this value is not used. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Link: https://lore.kernel.org/r/1566393276-42555-9-git-send-email-oulijun@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28RDMA/hns: Remove if-else judgment statements for creating srqWenpeng Liang1-22/+7
Because if the value of srqwqe_buf_pg_sz is zero, npages and ib_umem_page_count are equivalent, page_shif and PAGE_SHIFT are equivalent in hns_roce_create_srq. Here remove it. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Link: https://lore.kernel.org/r/1566393276-42555-8-git-send-email-oulijun@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28RDMA/hns: Add reset process for function-clearLang Cheng2-2/+98
If the hardware is resetting, the driver should not perform the mailbox operation.Function-clear needs to add relevant judgment. Signed-off-by: Lang Cheng <chenglang@huawei.com> Link: https://lore.kernel.org/r/1566393276-42555-7-git-send-email-oulijun@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28RDMA/hns: Fix cast from or to restricted __le32 for driverLang Cheng6-126/+105
Sparse is whining about the u32 and __le32 mixed usage in the driver. The roce_set_field() is used to __le32 data of hardware only. If a variable is not delivered to the hardware, the __le32 type and related operations are not required. Signed-off-by: Lang Cheng <chenglang@huawei.com> Link: https://lore.kernel.org/r/1566393276-42555-6-git-send-email-oulijun@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28RDMA/hns: Remove the some magic numberLijun Ou4-4/+11
Here uses the meaningful macro instead of the magic number for readability. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Lang Chen <chenglang@huawei.com> Link: https://lore.kernel.org/r/1566393276-42555-5-git-send-email-oulijun@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28RDMA/hns: Modify the data structure of hns_roce_avLang Cheng4-31/+18
we change type of some members to u32/u8 from __le32 as well as split sl_tclass_flowlabel into three variables in hns_roce_av. Signed-off-by: Lang Cheng <chenglang@huawei.com> Link: https://lore.kernel.org/r/1566393276-42555-4-git-send-email-oulijun@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28RDMA/siw: Fix IPv6 addr_list lockingBernard Metzler1-11/+20
Walking the address list of an inet6_dev requires appropriate locking. Since the called function siw_listen_address() may sleep, we have to use rtnl_lock() instead of read_lock_bh(). Also introduces sanity checks if we got a device from in_dev_get() or in6_dev_get(). Reported-by: Bart Van Assche <bvanassche@acm.org> Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190828130355.22830-1-bmt@zurich.ibm.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-28Merge branch 'mlx5-odp-dc' into rdma.git for-nextJason Gunthorpe1-48/+3
Michael Guralnik says: ==================== The series adds support for on-demand paging for DC transport. As DC is a mlx-only transport, the capabilities are exposed to the user using DEVX objects and later on through mlx5dv_query_device. ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'mlx5-odp-dc': IB/mlx5: Add page fault handler for DC initiator WQE IB/mlx5: Remove check of FW capabilities in ODP page fault handling net/mlx5: Set ODP capabilities for DC transport to max
2019-08-28IB/mlx5: Add page fault handler for DC initiator WQEMichael Guralnik1-1/+2
Parsing DC initiator WQEs upon page fault requires skipping an address vector segment, as in UD WQEs. Link: https://lore.kernel.org/r/20190819120815.21225-4-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-28IB/mlx5: Remove check of FW capabilities in ODP page fault handlingMichael Guralnik1-47/+1
As page fault handling is initiated by FW, there is no need to check that the ODP supports the operation and transport. Link: https://lore.kernel.org/r/20190819120815.21225-3-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller25-237/+247
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27RDMA/iwpm: Delete unnecessary checks before the macro call "dev_kfree_skb"Markus Elfring2-12/+6
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Link: https://lore.kernel.org/r/16df4c50-1f61-d7c4-3fc8-3073666d281d@web.de Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 01:57:02 +0000