summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2019-02-15iw_cxgb4: cq/qp mask depends on bar2 pages in a host pageRaju Rangoju1-2/+13
Adjust the cq/qp mask based on the number of bar2 pages in a host page. For user-mode rdma, the granularity of the BAR2 memory mapped to a user rdma process during queue allocation must be based on the host page size. The lld attributes udb_density and ucq_density are used to figure out how many sge contexts are in a bar2 page. So the rdev->qpmask and rdev->cqmask in iw_cxgb4 need to now be adjusted based on how many sge bar2 pages are in a host page. Otherwise the device fails to work on non 4k page size systems. Fixes: 2391b0030e24 ("cxgb4: Remove SGE_HOST_PAGE_SIZE dependency on page size") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04RDMA/srp: Rework SCSI device reset handlingBart Van Assche1-10/+0
Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1: BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10 Call Trace: blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x4f1/0xa20 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: <stable@vger.kernel.org> Fixes: 94a9174c630c ("IB/srp: reduce lock coverage of command completion") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-29IB/uverbs: Fix OOPs in uverbs_user_mmap_disassociateYishai Hadas1-5/+13
The vma->vm_mm can become impossible to get before rdma_umap_close() is called, in this case we must not try to get an mm that is already undergoing process exit. In this case there is no need to wait for anything as the VMA will be destroyed by another thread soon and is already effectively 'unreachable' by userspace. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000012bc50067 P4D 800000012bc50067 PUD 129db5067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 2050 Comm: bash Tainted: G W OE 4.20.0-rc6+ #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__rb_erase_color+0xb9/0x280 Code: 84 17 01 00 00 48 3b 68 10 0f 84 15 01 00 00 48 89 58 08 48 89 de 48 89 ef 4c 89 e3 e8 90 84 22 00 e9 60 ff ff ff 48 8b 5d 10 <f6> 03 01 0f 84 9c 00 00 00 48 8b 43 10 48 85 c0 74 09 f6 00 01 0f RSP: 0018:ffffbecfc090bab8 EFLAGS: 00010246 RAX: ffff97616346cf30 RBX: 0000000000000000 RCX: 0000000000000101 RDX: 0000000000000000 RSI: ffff97623b6ca828 RDI: ffff97621ef10828 RBP: ffff97621ef10828 R08: ffff97621ef10828 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff97623b6ca838 R13: ffffffffbb3fef50 R14: ffff97623b6ca828 R15: 0000000000000000 FS: 00007f7a5c31d740(0000) GS:ffff97623bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000011255a000 CR4: 00000000000006e0 Call Trace: unlink_file_vma+0x3b/0x50 free_pgtables+0xa1/0x110 exit_mmap+0xca/0x1a0 ? mlx5_ib_dealloc_pd+0x28/0x30 [mlx5_ib] mmput+0x54/0x140 uverbs_user_mmap_disassociate+0xcc/0x160 [ib_uverbs] uverbs_destroy_ufile_hw+0xf7/0x120 [ib_uverbs] ib_uverbs_remove_one+0xea/0x240 [ib_uverbs] ib_unregister_device+0xfb/0x200 [ib_core] mlx5_ib_remove+0x51/0xe0 [mlx5_ib] mlx5_remove_device+0xc1/0xd0 [mlx5_core] mlx5_unregister_device+0x3d/0xb0 [mlx5_core] remove_one+0x2a/0x90 [mlx5_core] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x16d/0x240 unbind_store+0xb2/0x100 kernfs_fop_write+0x102/0x180 __vfs_write+0x36/0x1a0 ? __alloc_fd+0xa9/0x170 ? set_close_on_exec+0x49/0x70 vfs_write+0xad/0x1a0 ksys_write+0x52/0xc0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: <stable@vger.kernel.org> # 4.19 Fixes: 5f9794dc94f5 ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25IB/ipoib: Fix for use-after-free in ipoib_cm_tx_startFeras Daoud2-3/+1
The following BUG was reported by kasan: BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020 Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib] Call Trace: dump_stack+0x9a/0xeb print_address_description+0xe3/0x2e0 kasan_report+0x18a/0x2e0 ? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] memcpy+0x1f/0x50 ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] ? kvm_clock_read+0x1f/0x30 ? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib] ? __lock_is_held+0xc2/0x170 ? process_one_work+0x880/0x1960 ? process_one_work+0x912/0x1960 process_one_work+0x912/0x1960 ? wq_pool_ids_show+0x310/0x310 ? lock_acquire+0x145/0x440 worker_thread+0x87/0xbb0 ? process_one_work+0x1960/0x1960 kthread+0x314/0x3d0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 Allocated by task 0: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x168/0x3e0 path_rec_create+0xa2/0x1f0 [ib_ipoib] ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib] dev_hard_start_xmit+0x159/0x8d0 sch_direct_xmit+0x226/0xb40 __dev_queue_xmit+0x1d63/0x2950 neigh_update+0x889/0x1770 arp_process+0xc47/0x21f0 arp_rcv+0x462/0x760 __netif_receive_skb_core+0x1546/0x2da0 netif_receive_skb_internal+0xf2/0x590 napi_gro_receive+0x28e/0x390 ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib] ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib] net_rx_action+0x427/0xe30 __do_softirq+0x28e/0xc42 Freed by task 26680: __kasan_slab_free+0x11d/0x160 kfree+0xf5/0x360 ipoib_flush_paths+0x532/0x9d0 [ib_ipoib] ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib] set_mode+0xc8/0x150 [ib_ipoib] kernfs_fop_write+0x279/0x440 __vfs_write+0xd8/0x5c0 vfs_write+0x15e/0x470 ksys_write+0xb8/0x180 do_syscall_64+0x9b/0x420 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88034c30bcc8 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff88034c30bcc8, ffff88034c30bec8) The buggy address belongs to the page: The following race between change mode and xmit flow is the reason for this use-after-free: Change mode Send packet 1 to GID XX Send packet 2 to GID XX | | | start | | | | | | | | | Create new path for GID XX | | and update neigh path | | | | | | | | | | flush_paths | | | | queue_work(cm.start_task) | | Path for GID XX not found | create new path | | start_task runs with old released path There is no locking to protect the lifetime of the path through the ipoib_cm_tx struct, so delete it entirely and always use the newly looked up path under the priv->lock. Fixes: 546481c2816e ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25IB/uverbs: Fix ioctl query port to consider device disassociationYishai Hadas1-1/+7
Methods cannot peak into the ufile, the only way to get a ucontext and hence a device is via the ib_uverbs_get_ucontext() call or inspecing a locked uobject. Otherwise during/after disassociation the pointers may be null or free'd. BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 PGD 800000005ece6067 P4D 800000005ece6067 PUD 5ece7067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 10631 Comm: ibv_ud_pingpong Tainted: GW OE 4.20.0-rc6+ #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_PORT+0x53/0x191 [ib_uverbs] Code: 80 00 00 00 31 c0 48 8b 47 40 48 8d 5c 24 38 48 8d 6c 24 08 48 89 df 48 8b 40 08 4c 8b a0 18 03 00 00 31 c0 f3 48 ab 48 89 ef <49> 83 7c 24 78 00 b1 06 f3 48 ab 0f 84 89 00 00 00 45 31 c9 31 d2 RSP: 0018:ffffb54802ccfb10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffb54802ccfb48 RCX:0000000000000000 RDX: fffffffffffffffa RSI: ffffb54802ccfcf8 RDI:ffffb54802ccfb18 RBP: ffffb54802ccfb18 R08: ffffb54802ccfd18 R09:0000000000000000 R10: 0000000000000000 R11: 00000000000000d0 R12:0000000000000000 R13: ffffb54802ccfcb0 R14: ffffb54802ccfc48 R15:ffff9f736e0059a0 FS: 00007f55a6bd7740(0000) GS:ffff9f737ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000078 CR3: 0000000064214000 CR4:00000000000006f0 Call Trace: ib_uverbs_cmd_verbs.isra.5+0x94d/0xa60 [ib_uverbs] ? copy_port_attr_to_resp+0x120/0x120 [ib_uverbs] ? arch_tlb_finish_mmu+0x16/0xc0 ? tlb_finish_mmu+0x1f/0x30 ? unmap_region+0xd9/0x120 ib_uverbs_ioctl+0xbc/0x120 [ib_uverbs] do_vfs_ioctl+0xa9/0x620 ? __do_munmap+0x29f/0x3a0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f55a62cb567 Fixes: 641d1207d2ed ("IB/core: Move query port to ioctl") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25RDMA/mlx5: Fix flow creation on representorsMark Bloch1-2/+1
The intention of the flow_is_supported was to disable the entire tree and methods that allow raw flow creation, but the grammar syntax has this disable the entire UVERBS_FLOW object. Since the method requires a MLX5_IB_OBJECT_FLOW_MATCHER there is no need to do anything, as it is automatically disabled when matchers are disabled. This restores the ability to create flow steering rules on representors via regular verbs. Fixes: a1462351b590 ("RDMA/mlx5: Fail early if user tries to create flows on IB representors") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25IB/uverbs: Fix OOPs upon device disassociationYishai Hadas1-4/+3
The async_file might be freed before the disassociation has been ended, causing qp shutdown to use after free on it. Since uverbs_destroy_ufile_hw is not a fence, it returns if a disassociation is ongoing in another thread. It has to be written this way to avoid deadlock. However this means that the ufile FD close cannot destroy anything that may still be used by an active kref, such as the the async_file. To fix that move the kref_put() to be in ib_uverbs_release_file(). BUG: unable to handle kernel paging request at ffffffffba682787 PGD bc80e067 P4D bc80e067 PUD bc80f063 PMD 1313df163 PTE 80000000bc682061 Oops: 0003 [#1] SMP PTI CPU: 1 PID: 32410 Comm: bash Tainted: G OE 4.20.0-rc6+ #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__pv_queued_spin_lock_slowpath+0x1b3/0x2a0 Code: 98 83 e2 60 49 89 df 48 8b 04 c5 80 18 72 ba 48 8d ba 80 32 02 00 ba 00 80 00 00 4c 8d 65 14 41 bd 01 00 00 00 48 01 c7 85 d2 <48> 89 2f 48 89 fb 74 14 8b 45 08 85 c0 75 42 84 d2 74 6b f3 90 83 RSP: 0018:ffffc1bbc064fb58 EFLAGS: 00010006 RAX: ffffffffba65f4e7 RBX: ffff9f209c656c00 RCX: 0000000000000001 RDX: 0000000000008000 RSI: 0000000000000000 RDI: ffffffffba682787 RBP: ffff9f217bb23280 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9f209d2c7800 R11: ffffffffffffffe8 R12: ffff9f217bb23294 R13: 0000000000000001 R14: 0000000000000000 R15: ffff9f209c656c00 FS: 00007fac55aad740(0000) GS:ffff9f217bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffba682787 CR3: 000000012f8e0000 CR4: 00000000000006e0 Call Trace: _raw_spin_lock_irq+0x27/0x30 ib_uverbs_release_uevent+0x1e/0xa0 [ib_uverbs] uverbs_free_qp+0x7e/0x90 [ib_uverbs] destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs] uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs] __uverbs_cleanup_ufile+0x73/0x90 [ib_uverbs] uverbs_destroy_ufile_hw+0x5d/0x120 [ib_uverbs] ib_uverbs_remove_one+0xea/0x240 [ib_uverbs] ib_unregister_device+0xfb/0x200 [ib_core] mlx5_ib_remove+0x51/0xe0 [mlx5_ib] mlx5_remove_device+0xc1/0xd0 [mlx5_core] mlx5_unregister_device+0x3d/0xb0 [mlx5_core] remove_one+0x2a/0x90 [mlx5_core] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x16d/0x240 unbind_store+0xb2/0x100 kernfs_fop_write+0x102/0x180 __vfs_write+0x36/0x1a0 ? __alloc_fd+0xa9/0x170 ? set_close_on_exec+0x49/0x70 vfs_write+0xad/0x1a0 ksys_write+0x52/0xc0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fac551aac60 Cc: <stable@vger.kernel.org> # 4.2 Fixes: 036b10635739 ("IB/uverbs: Enable device removal when there are active user space applications") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25RDMA/umem: Add missing initialization of owning_mmArtemy Kovalyov1-0/+3
When allocating a umem leaf for implicit ODP MR during page fault the field owning_mm was not set. Initialize and take a reference on this field to avoid kernel panic when trying to access this field. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 PGD 800000022dfed067 P4D 800000022dfed067 PUD 22dfcf067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 634 Comm: kworker/u33:0 Not tainted 4.20.0-rc6+ #89 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] RIP: 0010:ib_umem_odp_map_dma_pages+0xf3/0x710 [ib_core] Code: 45 c0 48 21 f3 48 89 75 b0 31 f6 4a 8d 04 33 48 89 45 a8 49 8b 44 24 60 48 8b 78 10 e8 66 16 a8 c5 49 8b 54 24 08 48 89 45 98 <8b> 42 58 85 c0 0f 84 8e 05 00 00 8d 48 01 48 8d 72 58 f0 0f b1 4a RSP: 0000:ffffb610813a7c20 EFLAGS: 00010202 RAX: ffff95ace6e8ac80 RBX: 0000000000000000 RCX: 000000000000000c RDX: 0000000000000000 RSI: 0000000000000850 RDI: ffff95aceaadae80 RBP: ffffb610813a7ce0 R08: 0000000000000000 R09: 0000000000080c77 R10: ffff95acfffdbd00 R11: 0000000000000000 R12: ffff95aceaa20a00 R13: 0000000000001000 R14: 0000000000001000 R15: 000000000000000c FS: 0000000000000000(0000) GS:ffff95acf7800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000022c834001 CR4: 00000000001606f0 Call Trace: pagefault_single_data_segment+0x1df/0xc60 [mlx5_ib] mlx5_ib_eqe_pf_action+0x7bc/0xa70 [mlx5_ib] ? __switch_to+0xe1/0x470 process_one_work+0x174/0x390 worker_thread+0x4f/0x3e0 kthread+0x102/0x140 ? drain_workqueue+0x130/0x130 ? kthread_stop+0x110/0x110 ret_from_fork+0x1f/0x30 Fixes: f27a0d50a4bc ("RDMA/umem: Use umem->owning_mm inside ODP") Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25RDMA/hns: Update the kernel header file of hnsLijun Ou1-2/+8
The hns_roce_ib_create_srq_resp is used to interact with the user for data, this was open coded to use a u32 directly, instead use a properly sized structure. Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-21IB/mlx5: Fix how advise_mr() launches async workJason Gunthorpe1-5/+5
Work must hold a kref on the ib_device otherwise the dev pointer can become free before the work runs. This can happen because the work is being pushed onto the system work queue which is not flushed during driver unregister. Remove the bogus use of 'reg_state': - While in uverbs the reg_state is guaranteed to always be REGISTERED - Testing reg_state with no locking is bogus. Use ib_device_try_get() to get back into a region that prevents unregistration. For now continue with a flow that is similar to the existing code. Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com>
2019-01-21RDMA/device: Expose ib_device_try_get(()Jason Gunthorpe2-4/+10
It turns out future patches need this capability quite widely now, not just for netlink, so provide two global functions to manage the registration lock refcount. This also moves the point the lock becomes 1 to within ib_register_device() so that the semantics of the public API are very sane and clear. Calling ib_device_try_get() will fail on devices that are only allocated but not yet registered. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Parav Pandit <parav@mellanox.com>
2019-01-21IB/hfi1: Add limit test for RC/UC send via loopbackMike Marciniszyn1-1/+6
Fix potential memory corruption and panic in loopback for IB_WR_SEND variants. The code blindly assumes the posted length will fit in the fetched rwqe, which is not a valid assumption. Fix by adding a limit test, and triggering the appropriate send completion and putting the QP in an error state. This mimics the handling for non-loopback QPs. Fixes: 15703461533a ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt") Cc: <stable@vger.kernel.org> #v4.20+ Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-21IB/hfi1: Remove overly conservative VM_EXEC flag checkMichael J. Ruhl1-1/+1
Applications that use the stack for execution purposes cause userspace PSM jobs to fail during mmap(). Both Fortran (non-standard format parsing) and C (callback functions located in the stack) applications can be written such that stack execution is required. The linker notes this via the gnu_stack ELF flag. This causes READ_IMPLIES_EXEC to be set which forces all PROT_READ mmaps to have PROT_EXEC for the process. Checking for VM_EXEC bit and failing the request with EPERM is overly conservative and will break any PSM application using executable stacks. Cc: <stable@vger.kernel.org> #v4.14+ Fixes: 12220267645c ("IB/hfi: Protect against writable mmap") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-21IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMMBrian Welty2-2/+0
The work completion length for a receiving a UD send with immediate is short by 4 bytes causing application using this opcode to fail. The UD receive logic incorrectly subtracts 4 bytes for immediate value. These bytes are already included in header length and are used to calculate header/payload split, so the result is these 4 bytes are subtracted twice, once when the header length subtracted from the overall length and once again in the UD opcode specific path. Remove the extra subtraction when handling the opcode. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-21IB/mlx4: Fix using wrong function to destroy sqp AHs under SRIOVJack Morgenstein1-3/+3
The commit cited below replaced rdma_create_ah with mlx4_ib_create_slave_ah when creating AHs for the paravirtualized special QPs. However, this change also required replacing rdma_destroy_ah with mlx4_ib_destroy_ah in the affected flows. The commit missed 3 places where rdma_destroy_ah should have been replaced with mlx4_ib_destroy_ah. As a result, the pd usecount was decremented when the ah was destroyed -- although the usecount was NOT incremented when the ah was created. This caused the pd usecount to become negative, and resulted in the WARN_ON stack trace below when the mlx4_ib.ko module was unloaded: WARNING: CPU: 3 PID: 25303 at drivers/infiniband/core/verbs.c:329 ib_dealloc_pd+0x6d/0x80 [ib_core] Modules linked in: rdma_ucm rdma_cm iw_cm ib_cm ib_umad mlx4_ib(-) ib_uverbs ib_core mlx4_en mlx4_core nfsv3 nfs fscache configfs xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bridge stp llc dm_mirror dm_region_hash dm_log dm_mod dax rndis_wlan rndis_host coretemp kvm_intel cdc_ether kvm usbnet iTCO_wdt iTCO_vendor_support cfg80211 irqbypass lpc_ich ipmi_si i2c_i801 mii pcspkr i2c_core mfd_core ipmi_devintf i7core_edac ipmi_msghandler ioatdma pcc_cpufreq dca acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi mptsas scsi_transport_sas mptscsih crc32c_intel ata_piix bnx2 mptbase ipv6 crc_ccitt autofs4 [last unloaded: mlx4_core] CPU: 3 PID: 25303 Comm: modprobe Tainted: G W I 5.0.0-rc1-net-mlx4+ #1 Hardware name: IBM -[7148ZV6]-/Node 1, System Card, BIOS -[MLE170CUS-1.70]- 09/23/2011 RIP: 0010:ib_dealloc_pd+0x6d/0x80 [ib_core] Code: 00 00 85 c0 75 02 5b c3 80 3d aa 87 03 00 00 75 f5 48 c7 c7 88 d7 8f a0 31 c0 c6 05 98 87 03 00 01 e8 07 4c 79 e0 0f 0b 5b c3 <0f> 0b eb be 0f 0b eb ab 90 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 RSP: 0018:ffffc90005347e30 EFLAGS: 00010282 RAX: 00000000ffffffea RBX: ffff8888589e9540 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffff88885d57ad40 RDI: 0000000000000000 RBP: ffff88885b029c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000004 R12: ffff8887f06c0000 R13: ffff8887f06c13e8 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fd6743c6740(0000) GS:ffff88887fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000ed1038 CR3: 00000007e3156000 CR4: 00000000000006e0 Call Trace: mlx4_ib_close_sriov+0x125/0x180 [mlx4_ib] mlx4_ib_remove+0x57/0x1f0 [mlx4_ib] mlx4_remove_device+0x92/0xa0 [mlx4_core] mlx4_unregister_interface+0x39/0x90 [mlx4_core] mlx4_ib_cleanup+0xc/0xd7 [mlx4_ib] __x64_sys_delete_module+0x17d/0x290 ? trace_hardirqs_off_thunk+0x1a/0x1c ? do_syscall_64+0x12/0x180 do_syscall_64+0x4a/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5e62d5ff1b9a ("IB/mlx4: Create slave AH's directly") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-21RDMA/mlx5: Fix check for supported user flags when creating a QPMark Bloch1-7/+9
When the flags verification was added two flags were missed from the check: * MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC * MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC This causes user applications that were using these flags to break. Fixes: 2e43bb31b8df ("IB/mlx5: Verify that driver supports user flags") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds9-22/+108
Pull rdma fixes frfom Jason Gunthorpe: "Not much so far. We have the usual batch of bugs and two fixes to code merged this cycle: - Restore valgrind support for the ioctl verbs interface merged this window, and fix a missed error code on an error path from that conversion - A user reported crash on obsolete mthca hardware - pvrdma was using the wrong command opcode toward the hypervisor - NULL pointer crash regression when dumping rdma-cm over netlink - Be conservative about exposing the global rkey" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUT RDMA/mthca: Clear QP objects during their allocation RDMA/vmw_pvrdma: Return the correct opcode when creating WR RDMA/cma: Add cm_id restrack resource based on kernel or user cm_id type RDMA/nldev: Don't expose unsafe global rkey to regular user RDMA/uverbs: Fix post send success return value in case of error
2019-01-14RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUTJason Gunthorpe4-13/+59
When the ioctl interface for the write commands was introduced it did not mark the core response with UVERBS_ATTR_F_VALID_OUTPUT. This causes rdma-core in userspace to not mark the buffers as written for valgrind. Along the same lines it turns out we have always missed marking the driver data. Fixing both of these makes valgrind work properly with rdma-core and ioctl. Fixes: 4785860e04bc ("RDMA/uverbs: Implement an ioctl that can call write and write_ex handlers") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-01-10RDMA/mthca: Clear QP objects during their allocationLeon Romanovsky1-2/+2
As part of audit process to update drivers to use rdma_restrack_add() ensure that QP objects is cleared before access. Such change fixes the crash observed with uninitialized non zero sgid attr accessed by ib_destroy_qp(). CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64 Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib] RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core] RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699 RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20 RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400 R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000 FS: 0000000000000000(0000) GS:ffff8d1bf7ac0000(0000) knlGS:0000000000000000 Trace: ib_destroy_qp+0xc9/0x240 [ib_core] ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib] process_one_work+0x1a1/0x3a0 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Reported-by: Alexander Murashkin <AlexanderMurashkin@msn.com> Tested-by: Alexander Murashkin <AlexanderMurashkin@msn.com> Fixes: 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-10RDMA/vmw_pvrdma: Return the correct opcode when creating WRAdit Ranadive2-1/+40
Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device opcodes explicitly. Reported-by: Ruishuang Wang <ruishuangw@vmware.com> Fixes: 9a59739bd01f ("IB/rxe: Revise the ib_wr_opcode enum") Cc: stable@vger.kernel.org Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Ruishuang Wang <ruishuangw@vmware.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-08RDMA/cma: Add cm_id restrack resource based on kernel or user cm_id typeSteve Wise1-1/+4
A recent regression causes a null ptr crash when dumping cm_id resources. The cma is incorrectly adding all cm_id restrack resources as kernel mode. Fixes: af8d70375d56 ("RDMA/restrack: Resource-tracker should not use uobject pointers") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain16-79/+71
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-07RDMA/nldev: Don't expose unsafe global rkey to regular userLeon Romanovsky1-4/+0
Unsafe global rkey is considered dangerous because it exposes memory registered for all memory in the system. Only users with a QP on the same PD can use the rkey, and generally those QPs will already know the value. However, out of caution, do not expose the value to unprivleged users on the local system. Require CAP_NET_ADMIN instead. Cc: <stable@vger.kernel.org> # 4.16 Fixes: 29cf1351d450 ("RDMA/nldev: provide detailed PD information") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-07RDMA/uverbs: Fix post send success return value in case of errorGal Pressman1-1/+3
If get QP object fails 'ret' must be assigned with a proper error code. Fixes: 9a0738575f26 ("RDMA/uverbs: Use uverbs_response() for remaining response copying") Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds6-21/+10
Pull rdma fixes from Jason Gunthorpe: "Over the break a few defects were found, so this is a -rc style pull request of various small things that have been posted. - An attempt to shorten RCU grace period driven delays showed crashes during heavier testing, and has been entirely reverted - A missed merge/rebase error between the advise_mr and ib_device_ops series - Some small static analysis driven fixes from Julia and Aditya - Missed ability to create a XRC_INI in the devx verbs interop series" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: infiniband/qedr: Potential null ptr dereference of qp infiniband: bnxt_re: qplib: Check the return value of send_message IB/ipoib: drop useless LIST_HEAD IB/core: Add advise_mr to the list of known ops Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads" IB/mlx5: Allow XRC INI usage via verbs in DEVX context
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds3-4/+3
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-02infiniband/qedr: Potential null ptr dereference of qpAditya Pakki1-0/+2
idr_find() may fail and return a NULL pointer. The fix checks the return value of the function and returns an error in case of NULL. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-02infiniband: bnxt_re: qplib: Check the return value of send_messageAditya Pakki1-3/+2
In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an error value but it is lost. Propagate this error to the callers. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-02IB/ipoib: drop useless LIST_HEADJulia Lawall1-1/+0
Drop LIST_HEAD where the variable it declares is never used. Commit 31c02e215700 ("IPoIB: Avoid using stale last_send counter when reaping AHs") removed the uses, but not the declaration. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 31c02e215700 ("IPoIB: Avoid using stale last_send counter when reaping AHs") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-02IB/core: Add advise_mr to the list of known opsMoni Shoua1-0/+1
We need to add advise_mr to the list of operation setters on the ib_device or otherwise callers to ib_set_device_ops() for advise_mr operation will not have their callback registered. When the advise_mr series was merged with the device ops series the SET_DEVICE_OPS() was missed. Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-02Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads"Leon Romanovsky1-16/+3
Longer term testing shows this patch didn't play well with MR cache and caused to call traces during remove_mkeys(). This reverts commit bb7e22a8ab00ff9ba911a45ba8784cef9e6d6f7a. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-02IB/mlx5: Allow XRC INI usage via verbs in DEVX contextYishai Hadas1-1/+2
From device point of view both XRC target and initiator are XRC transport type. Fix to use the expected UID as was handled for the XRC target case to allow its usage via verbs in DEVX context. Fixes: 5aa3771ded54 ("IB/mlx5: Allow XRC usage via verbs in DEVX context") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-20/+13
Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...
2018-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds174-3991/+6957
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-9/+1
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-28mm/mmu_notifier: use structure for invalidate_range_start/end callbackJérôme Glisse2-20/+13
Patch series "mmu notifier contextual informations", v2. This patchset adds contextual information, why an invalidation is happening, to mmu notifier callback. This is necessary for user of mmu notifier that wish to maintains their own data structure without having to add new fields to struct vm_area_struct (vma). For instance device can have they own page table that mirror the process address space. When a vma is unmap (munmap() syscall) the device driver can free the device page table for the range. Today we do not have any information on why a mmu notifier call back is happening and thus device driver have to assume that it is always an munmap(). This is inefficient at it means that it needs to re-allocate device page table on next page fault and rebuild the whole device driver data structure for the range. Other use case beside munmap() also exist, for instance it is pointless for device driver to invalidate the device page table when the invalidation is for the soft dirtyness tracking. Or device driver can optimize away mprotect() that change the page table permission access for the range. This patchset enables all this optimizations for device drivers. I do not include any of those in this series but another patchset I am posting will leverage this. The patchset is pretty simple from a code point of view. The first two patches consolidate all mmu notifier arguments into a struct so that it is easier to add/change arguments. The last patch adds the contextual information (munmap, protection, soft dirty, clear, ...). This patch (of 3): To avoid having to change many callback definition everytime we want to add a parameter use a structure to group all parameters for the mmu_notifier invalidate_range_start/end callback. No functional changes with this patch. [akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc] Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband] Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-22RDMA/srpt: Use kmem_cache_free() instead of kfree()Wei Yongjun1-1/+1
memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Fixes: 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-22RDMA/mlx5: Signedness bug in UVERBS_HANDLER()Dan Carpenter1-1/+1
The "num_actions" variable needs to be signed for the error handling to work. The maximum number of actions is less than 256 so int type is large enough for that. Fixes: cbfdd442c43e ("IB/uverbs: Add helper to get array size from ptr attribute") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-22IB/uverbs: Signedness bug in UVERBS_HANDLER()Dan Carpenter1-1/+1
The "num_sge" variable needs to be signed for the error handling to work. The uverbs_attr_ptr_get_array_size() returns int so this change is safe. Fixes: ad8a4496757f ("IB/uverbs: Add support to advise_mr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-21IB/mlx5: Allocate the per-port Q counter shared when DEVX is supportedYishai Hadas3-2/+26
The per-port Q counter is some kernel resource and as such may be used by few UID(s) upon DEVX usage. To enable using it for QP/RQ when DEVX context is used need to allocate it with a sharing mode indication to let firmware allows its usage. The UID = 0xffff was chosen to mark it. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-21IB/umad: Start using dev_groups of classParav Pandit1-16/+12
Start using core defined dev_groups of a class which allows to add device attributes to the core kernel and simplify the umad module. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-21IB/umad: Use class_groups and let core create class fileParav Pandit1-9/+14
Use class->class_groups core kernel facility to create the abi version file instead of open coding. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-21IB/umad: Refactor code to use cdev_device_add()Parav Pandit1-85/+86
Refactor code to use cdev_device_add() and do other minor refactors while modifying these functions as below. 1. Instead of returning generic -1, return an actual error for ib_umad_init_port(). 2. Introduce and use ib_umad_init_port_dev() for sm and umad char devices. 3. Instead of kobj, use more light weight kref to refcount ib_umad_device. 4. Use modern cdev_device_add() single code cut down three steps of cdev_add(), device_create(). This further helps to move device sysfs files to class attributes in subsequent patch. 5. Remove few empty lines while refactoring these functions. 6. Use sizeof() instead of sizeof to avoid checkpatch warning. 7. Use struct_size() for calculation of ib_umad_port. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-21IB/umad: Avoid destroying device while it is accessedParav Pandit1-9/+13
ib_umad_reg_agent2() and ib_umad_reg_agent() access the device name in dev_notice(), while concurrently, ib_umad_kill_port() can destroy the device using device_destroy(). cpu-0 cpu-1 ----- ----- ib_umad_ioctl() [...] ib_umad_kill_port() device_destroy(dev) ib_umad_reg_agent() dev_notice(dev) Therefore, first mark ib_dev as NULL, to block any further access in file ops, unregister the mad agent and destroy the device at the end after mutex is unlocked. This ensures that device doesn't get destroyed, while it may get accessed. Fixes: 0f29b46d49b0 ("IB/mad: add new ioctl to ABI to support new registration options") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-21IB/umad: Simplify and avoid dynamic allocation of classParav Pandit1-21/+21
Simplify code to have a static structure instance for umad class allocation. This will allow to have class attributes defined along with class registration in subsequent patch and allows more class methods definition similar to ib_core module. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20IB/mlx5: Fix wrong error unwindJason Gunthorpe1-3/+5
The destroy_workqueue on error unwind is missing, and the code jumps to the wrong exit label. Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support") Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20IB/mlx4: Remove set but not used variable 'pd'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/mlx4/qp.c: In function '_mlx4_ib_destroy_qp': drivers/infiniband/hw/mlx4/qp.c:1612:22: warning: variable 'pd' set but not used [-Wunused-but-set-variable] Fixes: e00b64f7c54c ("RDMA: Cleanup undesired pd->uobject usage") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20RDMA/iwcm: Don't copy past the end of dev_name() stringSteve Wise1-4/+8
We now use dev_name(&ib_device->dev) instead of ib_device->name in iwpm messages. The name field in struct device is a const char *, where as ib_device->name is a char array of size IB_DEVICE_NAME_MAX, and it is pre-initialized to zeros. Since iw_cm_map() was using memcpy() to copy in the device name, and copying IWPM_DEVNAME_SIZE bytes, it ends up copying past the end of the source device name string and copying random bytes. This results in iwpmd failing the REGISTER_PID request from iwcm. Thus port mapping is broken. Validate the device and if names, and use strncpy() to inialize the entire message field. Fixes: 896de0090a85 ("RDMA/core: Use dev_name instead of ibdev->name") Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20IB/mlx5: Fix long EEH recover time with NVMe offloadsHuy Nguyen1-3/+16
On NVMe offloads connection with many IO queues, EEH takes long time to recover. The culprit is the synchronize_srcu in the destroy_mkey. The solution is to use synchronize_srcu only for ODP mkey. Fixes: b4cfe447d47b ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20IB/mlx5: Simplify netdev unbindingOr Gerlitz1-5/+9
When dealing with netdev unregister events, we just need to know that this is our currently bounded netdev. There's no need to do any further checks/queries. This patch doesn't change any functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>