summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2014-10-09IB/iser: Use iser_warn instead of BUG_ON in iser_conn_releaseAriel Nahum1-1/+3
In case iscsid was violently killed (SIGKILL) during its error recovery stage, we may never get a connection teardown sequence for some of the old connections. No harm done, but when we try to unload the module we will need to cleanup all these connections. So we actually may end-up here - so it's not a BUG_ON(), just give a relaxed warning that this happened and continue with normal unload. BUG_ON() will cause segfault on module_exit and we don't want that. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Signal iSCSI layer that transport is broken in error completionsSagi Grimberg1-4/+25
Previously we notified iscsi layer about the connection layer when we consumed all of our flush errors. This was racy as there was no guarentee that iscsi_conn wasn't terminated by then (which ends up in an invalid memory access). In case we got a non FLUSH error completion, we are guarenteed that iscsi_conn is still alive. We should notify iSCSI layer with iscsi_conn_failure to initiate error handling. While we are at it, add a nice kernel-doc style documentation. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Protect tasks cleanup in case IB device was already releasedSagi Grimberg1-1/+7
Bailout in case a task cleanup (iscsi_iser_cleanup_task) is called after the IB device was removed (DEVICE_REMOVAL CM event). We also call iscsi_conn_stop with a lock taken to prevent DEVICE_REMOVAL and tasks cleanup from racing. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Unbind at conn_stop stageAriel Nahum1-0/+7
Previously we didn't need to unbind the iser_conn and iscsi_conn since we always relied on iscsi daemon to teardown the connection and never let it finish before we cleanup all that is needed in iser. This is not the case anymore (for DEVICE_REMOVAL event). So avoid any possible chance we cause iscsi_conn dereference after iscsi_conn was freed. We also call iser_conn_terminate (safe to call multiple times) just for the corner case of iscsi daemon stopping an old connection before invoking endpoint removal (might happen if it was violently killed). Notice we are unbinding under a lock - which is required. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Don't bound release_work completions timeoutsSagi Grimberg1-9/+4
We no longer rely on iscsi connection teardown sequence, so no need to give a grace period and continue cleanup if it expired. Have iser_conn_release wait for full completion before freeing iser_conn. ib_completion: Guaranteed to come when: - Got DISCONNECTED/ADDR_CHANGE event or - iSCSI called ep_disconnect/conn_stop Guaranteed to finish when: - Got TIMEWAIT_EXIT/DEVICE_REMOVAL event - All Flush errors are consumed - IB related resources are destroyed stop_completion: Guaranteed to come when: - iSCSI calls conn_stop Guaranteed to finish when: - All inflight tasks were cleaned up Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Fix DEVICE REMOVAL handling in the absence of iscsi daemonSagi Grimberg2-61/+108
iscsi daemon is in user-space, thus we can't rely on it to be invoked at connection teardown (if not running or does not receive CPU time). This patch addresses the issue by re-structuring iSER connection teardown logic and CM events handling. The CM events will dictate the RDMA resources destruction (ib_conn) and iser_conn is kept around as long as iscsi_conn is left around allowing iscsi/iser callbacks to continue after RDMA transport was destroyed. This patch introduces a separation in logic when handling CM events: - DISCONNECTED_HANDLER, ADDR_CHANGED This events indicate the start of teardown process. Actions: 1. Terminate the connection: rdma_disconnect (send DREQ/DREP) 2. Notify iSCSI of connection failure 3. Change state to TERMINATING 4. Poll for all flush errors to be consumed - TIMEWAIT_EXIT, DEVICE_REMOVAL These events indicate the final stage of termination process and we can free RDMA related resources. Actions: 1. Call disconnected handler (we are not guaranteed that DISCONNECTED event was invoked in the past) 2. Cleanup RDMA related resources 3. For DEVICE_REMOVAL return non-zero rc from cma_handler to implicitly destroy the cm_id (Can't rely on user-space, make sure we have forward progress) We replace flush_completion (indicate all flushes were consumed) with ib_completion (rdma resources were cleaned up). The iser_conn_release_work will wait for teardown completions: - conn_stop was completed (tasks were cleaned-up) - stop_completion - RDMA resources were destroyed - ib_completion And then will continue to free iser connection representation (iser_conn). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Extend iser_free_ib_conn_res()Sagi Grimberg1-28/+30
Put all connection IB related resources release in this routine. One exception is the cm_id which cannot be destroyed as the routine is protected by the state mutex. Also move its position to avoid forward declaration. While at it fix qp NULL assignment. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Remove unused variables and dead codeRoi Dayan1-4/+0
Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Re-introduce ib_connSagi Grimberg5-204/+245
Structure that describes the RDMA relates connection objects. Static member of iser_conn. This patch does not change any functionality Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Rename ib_conn -> iser_connSagi Grimberg5-392/+403
Two reasons why we choose to do this: 1. No point today calling struct iser_conn by another name ib_conn 2. In the next patches we will restructure iser control plane representation - struct iser_conn: connection logical representation - struct ib_conn: connection RDMA layout representation This patch does not change any functionality. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09[infiniband] remove pointless assignmentsAl Viro2-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds6-69/+104
Pull networking updates from David Miller: "Most notable changes in here: 1) By far the biggest accomplishment, thanks to a large range of contributors, is the addition of multi-send for transmit. This is the result of discussions back in Chicago, and the hard work of several individuals. Now, when the ->ndo_start_xmit() method of a driver sees skb->xmit_more as true, it can choose to defer the doorbell telling the driver to start processing the new TX queue entires. skb->xmit_more means that the generic networking is guaranteed to call the driver immediately with another SKB to send. There is logic added to the qdisc layer to dequeue multiple packets at a time, and the handling mis-predicted offloads in software is now done with no locks held. Finally, pktgen is extended to have a "burst" parameter that can be used to test a multi-send implementation. Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4, virtio_net Adding support is almost trivial, so export more drivers to support this optimization soon. I want to thank, in no particular or implied order, Jesper Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann, David Tat, Hannes Frederic Sowa, and Rusty Russell. 2) PTP and timestamping support in bnx2x, from Michal Kalderon. 3) Allow adjusting the rx_copybreak threshold for a driver via ethtool, and add rx_copybreak support to enic driver. From Govindarajulu Varadarajan. 4) Significant enhancements to the generic PHY layer and the bcm7xxx driver in particular (EEE support, auto power down, etc.) from Florian Fainelli. 5) Allow raw buffers to be used for flow dissection, allowing drivers to determine the optimal "linear pull" size for devices that DMA into pools of pages. The objective is to get exactly the necessary amount of headers into the linear SKB area pre-pulled, but no more. The new interface drivers use is eth_get_headlen(). From WANG Cong, with driver conversions (several had their own by-hand duplicated implementations) by Alexander Duyck and Eric Dumazet. 6) Support checksumming more smoothly and efficiently for encapsulations, and add "foo over UDP" facility. From Tom Herbert. 7) Add Broadcom SF2 switch driver to DSA layer, from Florian Fainelli. 8) eBPF now can load programs via a system call and has an extensive testsuite. Alexei Starovoitov and Daniel Borkmann. 9) Major overhaul of the packet scheduler to use RCU in several major areas such as the classifiers and rate estimators. From John Fastabend. 10) Add driver for Intel FM10000 Ethernet Switch, from Alexander Duyck. 11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric Dumazet. 12) Add Datacenter TCP congestion control algorithm support, From Florian Westphal. 13) Reorganize sk_buff so that __copy_skb_header() is significantly faster. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits) netlabel: directly return netlbl_unlabel_genl_init() net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers net: description of dma_cookie cause make xmldocs warning cxgb4: clean up a type issue cxgb4: potential shift wrapping bug i40e: skb->xmit_more support net: fs_enet: Add NAPI TX net: fs_enet: Remove non NAPI RX r8169:add support for RTL8168EP net_sched: copy exts->type in tcf_exts_change() wimax: convert printk to pr_foo() af_unix: remove 0 assignment on static ipv6: Do not warn for informational ICMP messages, regardless of type. Update Intel Ethernet Driver maintainers list bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING tipc: fix bug in multicast congestion handling net: better IFF_XMIT_DST_RELEASE support net/mlx4_en: remove NETDEV_TX_BUSY 3c59x: fix bad split of cpu_to_le32(pci_map_single()) net: bcmgenet: fix Tx ring priority programming ...
2014-10-07Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet1-1/+1
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05iser-target: Disable TX completion interrupt coalescingNicholas Bellinger1-2/+2
This patch explicitly disables TX completion interrupt coalescing logic in isert_put_response() and isert_put_datain() that was originally added as an efficiency optimization in commit 95b60f07. It has been reported that this change can trigger ABORT_TASK timeouts under certain small block workloads, where disabling coalescing was required for stability. According to Sagi, this doesn't impact overall performance, so go ahead and disable it for now. Reported-by: Moussa Ba <moussaba@micron.com> Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-03net/mlx5_core: Update device capabilities handlingEli Cohen5-68/+103
Rearrange struct mlx5_caps so it has a "gen" field to represent the current capabilities configured for the device. Max capabilities can also be queried from the device. Also update capabilities struct to contain more fields as per the latest revision if firmware specification. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03iser-target: Fix smatch warningSagi Grimberg1-1/+1
Unused return value from down_interruptible Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-02Merge branches 'arm/exynos', 'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' ↵Joerg Roedel1-1/+1
and 'core' into next Conflicts: drivers/iommu/arm-smmu.c
2014-09-25IB/usnic: Convert to use new iommu_capable() API functionJoerg Roedel1-1/+1
Cc: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-09-23Merge tag 'rdma-for-linus' of ↵Linus Torvalds16-140/+247
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: "Last late set of InfiniBand/RDMA fixes for 3.17: - fixes for the new memory region re-registration support - iSER initiator error path fixes - grab bag of small fixes for the qib and ocrdma hardware drivers - larger set of fixes for mlx4, especially in RoCE mode" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/mlx4: Fix VF mac handling in RoCE IB/mlx4: Do not allow APM under RoCE IB/mlx4: Don't update QP1 in native mode IB/mlx4: Avoid accessing netdevice when building RoCE qp1 header mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addresses IB/core: When marshaling uverbs path, clear unused fields IB/mlx4: Avoid executing gid task when device is being removed IB/mlx4: Fix lockdep splat for the iboe lock IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes up IB/mlx4: Reorder steps in RoCE GID table initialization IB/mlx4: Don't duplicate the default RoCE GID IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs() IB/iser: Bump version to 1.4.1 IB/iser: Allow bind only when connection state is UP IB/iser: Fix RX/TX CQ resource leak on error flow RDMA/ocrdma: Use right macro in query AH RDMA/ocrdma: Resolve L2 address when creating user AH mlx4: Correct error flows in rereg_mr IB/qib: Correct reference counting in debugfs qp_stats IPoIB: Remove unnecessary port query ...
2014-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-4/+10
Pull networking fixes from David Miller: 1) If the user gives us a msg_namelen of 0, don't try to interpret anything pointed to by msg_name. From Ani Sinha. 2) Fix some bnx2i/bnx2fc randconfig compilation errors. The gist of the issue is that we firstly have drivers that span both SCSI and networking. And at the top of that chain of dependencies we have things like SCSI_FC_ATTRS and SCSI_NETLINK which are selected. But since select is a sledgehammer and ignores dependencies, everything to select's SCSI_FC_ATTRS and/or SCSI_NETLINK has to also explicitly select their dependencies and so on and so forth. Generally speaking 'select' is supposed to only be used for child nodes, those which have no dependencies of their own. And this whole chain of dependencies in the scsi layer violates that rather strongly. So just make SCSI_NETLINK depend upon it's dependencies, and so on and so forth for the things selecting it (either directly or indirectly). From Anish Bhatt and Randy Dunlap. 3) Fix generation of blackhole routes in IPSEC, from Steffen Klassert. 4) Actually notice netdev feature changes in rtl_open() code, from Hayes Wang. 5) Fix divide by zero in bond enslaving, from Nikolay Aleksandrov. 6) Missing memory barrier in sunvnet driver, from David Stevens. 7) Don't leave anycast addresses around when ipv6 interface is destroyed, from Sabrina Dubroca. 8) Don't call efx_{arch}_filter_sync_rx_mode before addr_list_lock is initialized in SFC driver, from Edward Cree. 9) Fix missing DMA error checking in 3c59x, from Neal Horman. 10) Openvswitch doesn't emit OVS_FLOW_CMD_NEW notifications accidently, fix from Samuel Gauthier. 11) pch_gbe needs to select NET_PTP_CLASSIFY otherwise we can get a build error. 12) Fix macvlan regression wherein we stopped emitting broadcast/multicast frames over software devices. From Nicolas Dichtel. 13) Fix infiniband bug due to unintended overflow of skb->cb[], from Eric Dumazet. And add an assertion so this doesn't happen again. 14) dm9000_parse_dt() should return error pointers, not NULL. From Tobias Klauser. 15) IP tunneling code uses this_cpu_ptr() in preemptible contexts, fix from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dma net: bcmgenet: fix TX reclaim accounting for fragments ipv4: do not use this_cpu_ptr() in preemptible context dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt() r8169: fix an if condition r8152: disable ALDPS ipoib: validate struct ipoib_cb size net: sched: shrink struct qdisc_skb_cb to 28 bytes tg3: Work around HW/FW limitations with vlan encapsulated frames macvlan: allow to enqueue broadcast pkt on virtual device pch_gbe: 'select' NET_PTP_CLASSIFY. scsi: Use 'depends' with LIBFC instead of 'select'. openvswitch: restore OVS_FLOW_CMD_NEW notifications genetlink: add function genl_has_listeners() lib: rhashtable: remove second linux/log2.h inclusion net: allow macvlans to move to net namespace 3c59x: Fix bad offset spec in skb_frag_dma_map 3c59x: Add dma error checking and recovery sparc: bpf_jit: fix support for ldx/stx mem and SKF_AD_VLAN_TAG can: at91_can: add missing prepare and unprepare of the clock ...
2014-09-22ipoib: validate struct ipoib_cb sizeEric Dumazet2-2/+8
To catch future errors sooner. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22Merge branches 'core', 'ipoib', 'iser', 'mlx4', 'ocrdma' and 'qib' into for-nextRoland Dreier15-134/+234
2014-09-22IB/mlx4: Fix VF mac handling in RoCEJack Morgenstein2-11/+20
We had several problems here. First, a race condition on QP1 mac handling between mlx4_ib_update_qps and mlx4_ib_modify_qp, which is fixed by taking the qp mutex in mlx4_ib_update_qps. Also, qp->pri.smac_port was not updated in mlx4_ib_update_qps. Last, in __mlx4_ib_modify_qp we did not properly handle the case where the mac is zero, but port is non-zero. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Do not allow APM under RoCEJack Morgenstein2-1/+21
Automatic Path Migration is not supported under RoCE. Therefore, return a "not-supported" error if the caller attempts to set an alternate path in a QP context. In addition, if there are no IB ports configured, do not report APM capability in the device flags returned by mlx4_ib_query_device. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Don't update QP1 in native modeJack Morgenstein1-0/+4
For native functions (non-SR-IOV), there's no reason to update the smac_index, as QP1 is a GSI QP. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Avoid accessing netdevice when building RoCE qp1 headerJack Morgenstein3-16/+28
The source MAC is needed in RoCE when building the QP1 header. Currently, this is obtained from the source net device. However, the net device may not yet exist, or can be destroyed in parallel to this QP1 send operation (e.g through the VPI port change flow) so accessing it may cause a kernel crash. To fix this, we maintain a source MAC cache per port for the net device in struct mlx4_ib_roce. This cached MAC is initialized to be the default MAC address obtained during HCA initialization via QUERY_PORT. This cached MAC is updated via the netdev event notifier handler. Since the cached MAC is held in an atomic64 object, we do not need locking when accessing it. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/core: When marshaling uverbs path, clear unused fieldsMatan Barak1-0/+4
When marsheling a user path to the kernel struct ib_sa_path, need to zero smac, dmac and set the vlan id to the "no vlan" value. Fixes: dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") Reported-by: Aleksey Senin <alekseys@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Avoid executing gid task when device is being removedMoni Shoua1-0/+9
When device is being removed (e.g during VPI port link type change from ETH to IB), tasks for gid table changes should not be executed. Flush the current queue of tasks and block further tasks from entering the queue. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Fix lockdep splat for the iboe lockJack Morgenstein1-12/+12
Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes upMoni Shoua1-8/+17
When a RoCE port becomes active and the netdev of the port has upper device (e.g bond/team), GIDs derived from the upper dev should appear in the port's RoCE GID table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Reorder steps in RoCE GID table initializationMoni Shoua1-12/+17
There's no need to reset the gid table twice and we need to do it only for Ethernet ports. Also, no need to actively scan ndetdevs since it's being done immediatly after we register netdev notifiers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Don't duplicate the default RoCE GIDMoni Shoua1-0/+4
When reading the IPv6 addresses from the net-device, make sure to avoid adding a duplicate entry to the GID table because of equality between the default GID we generate and the default IPv6 link-local address of the device. Fixes: acc4fccf4eff ("IB/mlx4: Make sure GID index 0 is always occupied") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs()Moni Shoua1-23/+26
When Ethernet netdev is not present for a port (e.g. when the link layer type of the port is InfiniBand) it's possible to dereference a null pointer when we do netdevice scanning. To fix that, we move a section of code that needs to run only when netdev is present to a proper if () statement. Fixes: ad4885d279b6 ("IB/mlx4: Build the port IBoE GID table properly under bonding") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Bump version to 1.4.1Or Gerlitz1-1/+1
Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Allow bind only when connection state is UPSagi Grimberg1-5/+14
We need to fail the bind operation if the iser connection state != UP (started teardown) and this should be done under the state lock. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Fix RX/TX CQ resource leak on error flowRoi Dayan1-10/+14
When failing to allocate TX CQ we already allocated RX CQ, so we need to make sure we release it. Also, when failing to register notification to the RX CQ we currently leak both RX and TX CQs of the current index, fix that too. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22RDMA/ocrdma: Use right macro in query AHdevesh.sharma@emulex.com1-1/+1
ocrdma_query_ah() does not use correct macro, and checks the wrong bit for the validity of address handle in vector table. Fix this. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22RDMA/ocrdma: Resolve L2 address when creating user AHdevesh.sharma@emulex.com1-11/+30
Because of IP-based GIDs, userspace AHs must have MAC and VLAN ID resolved separately. Presently, user AHs are broken for ocrdma. This patch resolves L2 addresses while creating user AH and obtains the right DMAC and VLAN ID before creating AH. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22mlx4: Correct error flows in rereg_mrMatan Barak1-2/+5
This patch addresses feedback from Sagi Grimberg on the rereg_mr implementation of mlx4. The following are fixed: 1. Set the correct pd_flags 2. Make sure we change the iova and size MR fields only after successful write and allocation of the MTTs. 3. Make the error checking more robust Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19IB/qib: Correct reference counting in debugfs qp_statsMike Marciniszyn2-9/+2
This particular reference count is not needed with the rcu protection, and the current code leaks a reference count, causing a hang in qib_qp_destroy(). Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19IPoIB: Remove unnecessary port queryAlex Estrin1-9/+1
There are two queries for port attributes one after another. A second call is not needed since port_attr structure already holds the data. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19IB/mlx4: Disable TSO for Connect-X rev. A0 HCAsMarkus Stockhausen1-1/+4
According to <http://marc.info/?t=138347640900004&r=1&w=2>, revision A0 of Connect-X does not correctly assemble TSO packets. Disable that feature on that hardware revision. Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19IB/qib: Change get_user_pages() usage to always NULL vmasMike Marciniszyn1-3/+3
The static helper routine, __qib_get_user_pages(), accepts a vma arg, but current use always passes NULL. This has caused some confusion associated with the correct use of this argument, but since the current use case doesn't require the flexiblity, the best thing to do is to simplfy the code to always pass NULL to get_user_pages(). Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19IB/ipath: Change get_user_pages() usage to always NULL vmasMike Marciniszyn1-3/+3
The static helper routine, __ipath_get_user_pages(), accepts a vma arg, but current use always passes NULL. This has caused some confusion associated with the correct use of this argument, but since the current use case doesn't require the flexiblity, the best thing to do is to simplfy the code to always pass NULL to get_user_pages(). Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_getShawn Bohrer1-6/+13
In debugging an application that receives -ENOMEM from ib_reg_mr(), I found that ib_umem_get() can fail because the pinned_vm count has wrapped causing it to always be larger than the lock limit even with RLIMIT_MEMLOCK set to RLIM_INFINITY. The wrapping of pinned_vm occurs because the process that calls ib_reg_mr() will have its mm->pinned_vm count incremented. Later a different process with a different mm_struct than the one that allocated the ib_umem struct ends up releasing it which results in decrementing the new processes mm->pinned_vm count past zero and wrapping. I'm not entirely sure what circumstances cause a different process to release the ib_umem than the one that allocated it but the kernel stack trace of the freeing process from my situation looks like the following: Call Trace: [<ffffffff814d64b1>] dump_stack+0x19/0x1b [<ffffffffa0b522a5>] ib_umem_release+0x1f5/0x200 [ib_core] [<ffffffffa0b90681>] mlx4_ib_destroy_qp+0x241/0x440 [mlx4_ib] [<ffffffffa0b4d93c>] ib_destroy_qp+0x12c/0x170 [ib_core] [<ffffffffa0cc7129>] ib_uverbs_close+0x259/0x4e0 [ib_uverbs] [<ffffffff81141cba>] __fput+0xba/0x240 [<ffffffff81141e4e>] ____fput+0xe/0x10 [<ffffffff81060894>] task_work_run+0xc4/0xe0 [<ffffffff810029e5>] do_notify_resume+0x95/0xa0 [<ffffffff814e3dd0>] int_signal+0x12/0x17 The following patch fixes the issue by storing the pid struct of the process that calls ib_umem_get() so that ib_umem_release and/or ib_umem_account() can properly decrement the pinned_vm count of the correct mm_struct. Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Reviewed-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19RDMA/ocrdma: Do not skip setting deferred_armDevesh Sharma1-3/+1
When ib_request_notify_cq() is called for the first time, ocrdma tries to skip setting deffered_arm flag. This may lead CQ to an un-armed state thus never generating a CQ event and leaving consumer hung. This patch removes the part of code that skips setting deferred_arm. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19RDMA/ocrdma: Report correct value of max_fast_reg_page_list_lenDevesh Sharma1-1/+1
Fix ocrdma_query_device() to report correct value of max_fast_reg_page_list_len. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-15Target/iser: Fix initiator_depth and responder_resourcesSagi Grimberg1-5/+6
The iser target is the RDMA requester and the iser initiator is the RDMA responder. In order to determine the max inflight RDMA READ requests to set on the QP (initiator_depth), it should take the min between the initiator published initiator_depth and the max inflight rdma read requests its local HCA support (max_qp_init_rd_atom). The target will never handle incoming RDMA READ requests so no need to set responder_resources. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-15Target/iser: Avoid calling rdma_disconnect twiceSagi Grimberg1-1/+1
rdma_disconnect may be called in 2 code flows: - isert_wait_conn: disconnect initiated be the target - disconnected_handler: disconnect invoked by the initiator In case isert_conn->disconnect is true then rdma_disconnect was called in disconnected handler, no need to call it again from isert_wait_conn. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-24 05:32:35 +0000