Age | Commit message (Collapse) | Author | Files | Lines |
|
The only usage of the pma_table field in the ib_port struct is to pass its
address to sysfs_create_group() and sysfs_remove_group(). Make it const to
make it possible to constify a couple of static struct
attribute_group. This allows the compiler to put them in read-only memory.
Link: https://lore.kernel.org/r/20200930224004.24279-2-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sync device with CPU pages upon ODP MR registration. mlx5 already has to
zero the HW's version of the PAS list, may as well deliver a PAS list that
matches the current CPU page tables configuration.
Link: https://lore.kernel.org/r/20200930163828.1336747-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Extend advice MR to support non faulting mode, this can improve
performance by increasing the populated page tables in the device.
Link: https://lore.kernel.org/r/20200930163828.1336747-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Enable ODP sync without faulting, this improves performance by reducing
the number of page faults in the system.
The gain from this option is that the device page table can be aligned
with the presented pages in the CPU page table without causing page
faults.
As of that, the overhead on data path from hardware point of view to
trigger a fault which end-up by calling the driver to bring the pages
will be dropped.
Link: https://lore.kernel.org/r/20200930163828.1336747-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move to use hmm_range_fault() instead of get_user_pags_remote() to improve
performance in a few aspects:
This includes:
- Dropping the need to allocate and free memory to hold its output
- No need any more to use put_page() to unpin the pages
- The logic to detect contiguous pages is done based on the returned
order, no need to run per page and evaluate.
In addition, moving to use hmm_range_fault() enables to reduce page faults
in the system with it's snapshot mode, this will be introduced in next
patches from this series.
As part of this, cleanup some flows and use the required data structures
to work with hmm_range_fault().
Link: https://lore.kernel.org/r/20200930163828.1336747-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This three thread race can result in the work being run once the callback
becomes NULL:
CPU1 CPU2 CPU3
netevent_callback()
process_one_req() rdma_addr_cancel()
[..]
spin_lock_bh()
set_timeout()
spin_unlock_bh()
spin_lock_bh()
list_del_init(&req->list);
spin_unlock_bh()
req->callback = NULL
spin_lock_bh()
if (!list_empty(&req->list))
// Skipped!
// cancel_delayed_work(&req->work);
spin_unlock_bh()
process_one_req() // again
req->callback() // BOOM
cancel_delayed_work_sync()
The solution is to always cancel the work once it is completed so any
in between set_timeout() does not result in it running again.
Cc: stable@vger.kernel.org
Fixes: 44e75052bc2a ("RDMA/rdma_cm: Make rdma_addr_cancel into a fence")
Link: https://lore.kernel.org/r/20200930072007.1009692-1-leon@kernel.org
Reported-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Nothing reads this any more, and the reason for its existence has passed
due to the deferred fput() scheme.
Fixes: 8ea1f989aa07 ("drivers/IB,usnic: reduce scope of mmap_sem")
Link: https://lore.kernel.org/r/0-v1-df64ff042436+42-uctx_closing_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
list field is not used anywhere
Link: https://lore.kernel.org/r/20200930131407.6438-1-gi-oh.kim@clous.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some code was removed but the variables were still there, and some
parameters have been changed to be queried from firmware. So the
definitions of them are no longer needed.
Fixes: 2a3d923f8730 ("RDMA/hns: Replace magic numbers with #defines")
Fixes: 82e620d9c3a0 ("RDMA/hns: Modify the data structure of hns_roce_av")
Fixes: 82547469782a ("IB/hns: Implement the add_gid/del_gid and optimize the GIDs management")
Fixes: 21b97f538765 ("RDMA/hns: Fixup qp release bug")
Link: https://lore.kernel.org/r/1601371934-40003-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is no real need to have an intermediate pointer for the same struct,
remove it, and use struct directly.
Link: https://lore.kernel.org/r/20200926102450.2966017-11-leon@kernel.org
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
As preparation for the removal of QP allocation logic, we need to ensure
that ib_core allocates the right amount of memory before a call to the
driver create_qp(). It requires from driver to have the same structs for
all types of QPs.
Link: https://lore.kernel.org/r/20200926102450.2966017-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
GSI QP can't be created from the user space, hence the udata check is
always false (udata == NULL). Remove that check and simplify the flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-9-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The ioctl flow checks that the user provides only a supported list of QP
types, while write flow didn't do it and relied on the driver to check
it. Align those flows to fail as early as possible.
Link: https://lore.kernel.org/r/20200926102450.2966017-8-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since all mlx4 QP have same storage type, move the QP allocation to be in
one place. This change is preparation to removal of such allocation from
the driver.
Link: https://lore.kernel.org/r/20200926102450.2966017-7-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Refactor the storage struct of mlx4 GSI QP to be embedded in mlx4_ib
QP. This allows to remove internal memory allocation of QP struct which is
hidden inside the mlx4_ib_create_qp() flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-6-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
GSI QP doesn't need signal QP type because it is initialized statically to
zero, which is IB_SIGNAL_ALL_WR also wr->send_flags isn't set too. This
means that the GSI QP signal QP type can be removed.
Link: https://lore.kernel.org/r/20200926102450.2966017-5-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is no reason to have separate create flow for the GSI QP, while
general create_qp routine has all needed checks and ability to allocate
and free the proper struct mlx5_ib_qp.
Link: https://lore.kernel.org/r/20200926102450.2966017-4-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove duplication of mlx5_ib_qp and mlx5_ib_gsi_qp fields. This change
returns the memory footprint of mlx5_ib QP to be as it was before
embedding GSI QP.
Link: https://lore.kernel.org/r/20200926102450.2966017-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The GSI QPs have different create flow from the regular QPs, but it is not
really needed. Update the code to use mlx5_ib_qp as a storage class for
all outside of GSI calls.
Link: https://lore.kernel.org/r/20200926102450.2966017-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
infrastructure
Functions related to nested interface infrastructure such as
netdev_walk_all_{ upper | lower }_dev() pass both private functions
and "data" pointer to handle their own things.
At this point, the data pointer type is void *.
In order to make it easier to expand common variables and functions,
this new netdev_nested_priv structure is added.
In the following patch, a new member variable will be added into this
struct to fix the lockdep issue.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sizeof() when applied to a pointer typed expression should give the size
of the pointed data, even if the data is a pointer.
Fixes: e1f24a79f424 ("IB/mlx5: Support congestion related counters")
Link: https://lore.kernel.org/r/20200917081354.2083293-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
HIP08 supports RC inline up to size of 32 Bytes, and all data should be
put into SQWQE. For HIP09, this capability is extended to 1024 Bytes, if
length of data is longer than 32 Bytes, they will be filled into extended
sge space.
Link: https://lore.kernel.org/r/1599744069-9968-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The sq_sig_type field should be filled when querying QP, or the users may
get a wrong value.
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-9-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The hardware will add AckReq flag in BTH header according to the value of
ack_req_freq to request ACK from responder for the packets with this flag.
It should be greater than or equal to lp_pktn_ini instead of using a fixed
value.
Fixes: 7b9bd73ed13d ("RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC")
Link: https://lore.kernel.org/r/1600509802-44382-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.
Fixes: bfe860351e31 ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1600509802-44382-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB
and hop_num is 2. It is because that all variables involved in calculation
are defined in type of int. So change the type of bt_chunk_size,
buf_chunk_size and obj_per_chunk_default to u64.
Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1600509802-44382-6-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the the value of sl is larger than 7, if so,
an exception should be returned.
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-5-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Change "initialze" to "initialize".
Fixes: 8f3e9f3ea087 ("IB/hns: Add code for refreshing CQ CI using TPTR")
Link: https://lore.kernel.org/r/1600509802-44382-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
HIP08 doesn't support modifying the maximum number of outstanding WR in an
SRQ. However, the driver does not return a failure message, and users may
mistakenly think that the resizing is executed successfully. So the driver
needs to intercept this operation.
Fixes: ffb1308b88b6 ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1600509802-44382-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
According to the IB specifications, the verbs should return an immediate
error when the users set an unsupported opcode. Furthermore, refactor codes
about opcode in process of post_send to make the difference between opcodes
clearer.
Link: https://lore.kernel.org/r/1600509802-44382-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For HIP09, size of SCCC (Soft Congestion Control Context) is increased to
64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC
from driver instead of using a fixed value.
Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The new version of RoCEE supports using QPC in size of 256B or 512B, so
that HIP09 can supports new congestion control algorithms by using QPC in
larger size.
Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.
Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The new version of RoCEE supports using CEQE in size of 4B or 64B, AEQE in
size of 16B or 64B. The performance of bus can be improved by using larger
size of EQE.
Link: https://lore.kernel.org/r/1600245806-56321-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
sg_init_table() zeroes its first argument, so the allocation of that
argument doesn't have to.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>
Link: https://lore.kernel.org/r/1600601186-7420-6-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Occasionally ib_write_bw crash is seen due to access of a pd object in
i40iw_sc_qp_destroy after it is freed. Destroy qp is not synchronous in
i40iw and thus the iwqp object could be referencing a pd object that is
freed by ib core as a result of successful return from i40iw_destroy_qp.
Wait in i40iw_destroy_qp till all QP references are released and destroy
the QP and its associated resources before returning. Switch to use the
refcount API vs atomic API for lifetime management of the qp.
RIP: 0010:i40iw_sc_qp_destroy+0x4b/0x120 [i40iw]
[...]
RSP: 0018:ffffb4a7042e3ba8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000001 RCX: dead000000000122
RDX: ffffb4a7042e3bac RSI: ffff8b7ef9b1e940 RDI: ffff8b7efbf09080
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 8080808080808080 R11: 0000000000000010 R12: ffff8b7efbf08050
R13: 0000000000000001 R14: ffff8b7f15042928 R15: ffff8b7ef9b1e940
FS: 0000000000000000(0000) GS:ffff8b7f2fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000400 CR3: 000000020d60a006 CR4: 00000000001606e0
Call Trace:
i40iw_exec_cqp_cmd+0x4d3/0x5c0 [i40iw]
? try_to_wake_up+0x1ea/0x5d0
? __switch_to_asm+0x40/0x70
i40iw_process_cqp_cmd+0x95/0xa0 [i40iw]
i40iw_handle_cqp_op+0x42/0x1a0 [i40iw]
? cm_event_handler+0x13c/0x1f0 [iw_cm]
i40iw_rem_ref+0xa0/0xf0 [i40iw]
cm_work_handler+0x99c/0xd10 [iw_cm]
process_one_work+0x1a1/0x360
worker_thread+0x30/0x380
? process_one_work+0x360/0x360
kthread+0x10c/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x35/0x40
Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20200916131811.2077-1-shiraz.saleem@intel.com
Reported-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Sindhu, Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add separate stats types for send messages and RDMA read work requests.
Link: https://lore.kernel.org/r/20200915141449.8428-3-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The keep alive received counter is a software stat, keep it grouped with
all other software stats. Since all stored stats are software stats,
remove the efa_sw_stats struct and use efa_stats instead.
Link: https://lore.kernel.org/r/20200915141449.8428-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use rdma_restrack_set_name() and rdma_restrack_parent_name() instead of
tricky uses of rdma_restrack_attach_task()/rdma_restrack_uadd().
This uniformly makes all restracks add'd using rdma_restrack_add().
Link: https://lore.kernel.org/r/20200922091106.2152715-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Have a single rdma_restrack_add() that adds an entry, there is no reason
to split the user/kernel here, the rdma_restrack_set_task() is responsible
for this difference.
This patch prepares the code to the future requirement of making restrack
is mandatory for managing ib objects.
Link: https://lore.kernel.org/r/20200922091106.2152715-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Refactor the restrack code to make sure the kref inside the restrack entry
properly kref's the object in which it is embedded. This slight change is
needed for future conversions of MR and QP which are refcounted before the
release and kfree.
The ideal flow from ib_core perspective as follows:
* Allocate ib_* structure with rdma_zalloc_*.
* Set everything that is known to ib_core to that newly created object.
* Initialize kref with restrack help
* Call to driver specific allocation functions.
* Insert into restrack DB
....
* Return and release restrack with restrack_put.
Largely this means a rdma_restrack_new() should be called near allocating
the containing structure.
Link: https://lore.kernel.org/r/20200922091106.2152715-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The restrack is going to manage memory of all IB objects and must be
called before object is created. GSI QP in the mlx5_ib separated between
creating dummy interface and HW object beneath. This was achieved by
double call to ib_create_qp().
In order to skip such reentry call to internal driver create_qp code.
Link: https://lore.kernel.org/r/20200922091106.2152715-3-leon@kernel.org
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Update the code to have similar destroy pattern like other IB objects.
This change create asymmetry to the rdma_id_private create flow to make
sure that memory is managed by restrack.
Link: https://lore.kernel.org/r/20200922091106.2152715-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ucma_destroy_id() assumes that all things accessing the ctx will do so via
the xarray. This assumption violated only in the case the FD is being
closed, then the ctx is reached via the ctx_list. Normally this is OK
since ucma_destroy_id() cannot run concurrenty with release(), however
with ucma_migrate_id() is involved this can violated as the close of the
2nd FD can run concurrently with destroy on the first:
CPU0 CPU1
ucma_destroy_id(fda)
ucma_migrate_id(fda -> fdb)
ucma_get_ctx()
xa_lock()
_ucma_find_context()
xa_erase()
xa_unlock()
xa_lock()
ctx->file = new_file
list_move()
xa_unlock()
ucma_put_ctx()
ucma_close(fdb)
_destroy_id()
kfree(ctx)
_destroy_id()
wait_for_completion()
// boom, ctx was freed
The ctx->file must be modified under the handler and xa_lock, and prior to
modification the ID must be rechecked that it is still reachable from
cur_file, ie there is no parallel destroy or migrate.
To make this work remove the double locking and streamline the control
flow. The double locking was obsoleted by the handler lock now directly
preventing new uevents from being created, and the ctx_list cannot be read
while holding fgets on both files. Removing the double locking also
removes the need to check for the same file.
Fixes: 88314e4dda1e ("RDMA/cma: add support for rdma_migrate_id()")
Link: https://lore.kernel.org/r/0-v1-05c5a4090305+3a872-ucma_syz_migrate_jgg@nvidia.com
Reported-and-tested-by: syzbot+cc6fc752b3819e082d0c@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Once a mkey is created it can be modified using UMR. This is desirable for
performance reasons. However, different hardware has restrictions on what
modifications are possible using UMR. Make sense of these checks:
- mlx5_ib_can_reconfig_with_umr() returns true if the access flags can be
altered. Most cases create MRs using 0 access flags (now made clear by
consistent use of set_mkc_access_pd_addr_fields()), but the old logic
here was tormented. Make it clear that this is checking if the current
access_flags can be modified using UMR to different access_flags. It is
always OK to use UMR to change flags that all HW supports.
- mlx5_ib_can_load_pas_with_umr() returns true if UMR can be used to
enable and update the PAS/XLT. Enabling requires updating the entity
size, so UMR ends up completely disabled on this old hardware. Make it
clear why it is disabled. FRWR, ODP and cache always requires
mlx5_ib_can_load_pas_with_umr().
- mlx5_ib_pas_fits_in_mr() is used to tell if an existing MR can be
resized to hold a new PAS list. This only works for cached MR's because
we don't store the PAS list size in other cases.
To be very clear, arrange things so any pre-created MR's in the cache
check the newly requested access_flags before allowing the MR to leave the
cache. If UMR cannot set the required access_flags the cache fails to
create the MR.
This in turn means relaxed ordering and atomic are now correctly blocked
early for implicit ODP on older HW.
Link: https://lore.kernel.org/r/20200914112653.345244-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
set_reg_wr() always fails if !umr_modify_entity_size_disabled because
mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR
doesn't work and that means the device should not advertise
IB_DEVICE_MEM_MGT_EXTENSIONS.
Fixes: 841b07f99a47 ("IB/mlx5: Block MR WR if UMR is not possible")
Link: https://lore.kernel.org/r/20200914112653.345244-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Any mkey that is not enabled and assigned to userspace should have the PD
set to a kernel owned PD.
When cache entries are created for the first time the PDN is set to 0,
which is probably a kernel PD, but be explicit.
When a MR is registered using the hybrid reg_create with UMR xlt & enable
the disabled mkey is pointing at the user PD, keep it pointing at the
kernel until a UMR enables it and sets the user PD.
Fixes: 9ec4483a3f0f ("IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache")
Link: https://lore.kernel.org/r/20200914112653.345244-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
reg_create() open codes this helper, use the shared code.
Link: https://lore.kernel.org/r/20200914112653.345244-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
alloc_mr_from_cache() no longer returns EAGAIN, this is just dead code
now.
Fixes: aad719dcf379 ("RDMA/mlx5: Allow MRs to be created in the cache synchronously")
Link: https://lore.kernel.org/r/20200914112653.345244-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
hip06 does not support IB_WR_LOCAL_INV, so the ps_opcode should be set to
an invalid value instead of being left uninitialized.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Fixes: a2f3d4479fe9 ("RDMA/hns: Avoid unncessary initialization")
Link: https://lore.kernel.org/r/1600350615-115217-1-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|