summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/ulp/ipoib
AgeCommit message (Collapse)AuthorFilesLines
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-4/+4
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds4-31/+35
Pull rdma updates from Jason Gunthorpe: "A more active cycle than most of the recent past, with a few large, long discussed works this time. The RNBD block driver has been posted for nearly two years now, and flowing through RDMA due to it also introducing a new ULP. The removal of FMR has been a recurring discussion theme for a long time. And the usual smattering of features and bug fixes. Summary: - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa - Continuing driver cleanups in bnxt_re, hns - Big cleanup of mlx5 QP creation flows - More consistent use of src port and flow label when LAG is used and a mlx5 implementation - Additional set of cleanups for IB CM - 'RNBD' network block driver and target. This is a network block RDMA device specific to ionos's cloud environment. It brings strong multipath and resiliency capabilities. - Accelerated IPoIB for HFI1 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds - Support for exchanging the new IBTA defiend ECE data during RDMA CM exchanges - Removal of the very old and insecure FMR interface from all ULPs and drivers. FRWR should be preferred for at least a decade now" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits) RDMA/cm: Spurious WARNING triggered in cm_destroy_id() RDMA/mlx5: Return ECE DC support RDMA/mlx5: Don't rely on FW to set zeros in ECE response RDMA/mlx5: Return an error if copy_to_user fails IB/hfi1: Use free_netdev() in hfi1_netdev_free() RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr() RDMA/core: Move and rename trace_cm_id_create() IB/hfi1: Fix hfi1_netdev_rx_init() error handling RDMA: Remove 'max_map_per_fmr' RDMA: Remove 'max_fmr' RDMA/core: Remove FMR device ops RDMA/rdmavt: Remove FMR memory registration RDMA/mthca: Remove FMR support for memory registration RDMA/mlx4: Remove FMR support for memory registration RDMA/i40iw: Remove FMR leftovers RDMA/bnxt_re: Remove FMR leftovers RDMA/mlx5: Remove FMR leftovers RDMA/core: Remove FMR pool API RDMA/rds: Remove FMR support for memory registration RDMA/srp: Remove support for FMR memory registration ...
2020-05-27IB/ipoib: Fix double free of skb in case of multicast traffic in CM modeValentine Fatiev4-12/+26
When connected mode is set, and we have connected and datagram traffic in parallel, ipoib might crash with double free of datagram skb. The current mechanism assumes that the order in the completion queue is the same as the order of sent packets for all QPs. Order is kept only for specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and few CM's) in parallel. The problem: ---------------------------------------------------------- Transmit queue: ----------------- UD skb pointer kept in queue itself, CM skb kept in spearate queue and uses transmit queue as a placeholder to count the number of total transmitted packets. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ tail head Completion queue (problematic scenario) - the order not the same as in the transmit queue: 1 2 3 4 5 6 7 8 9 ------------------------------------ ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5 ------------------------------------ 1. CM1 'wc' processing - skb freed in cm separate ring. - tx_tail of transmit queue increased although UD2 is not freed. Now driver assumes UD2 index is already freed and it could be used for new transmitted skb. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ ^ (Bad)tail head (Bad - Could be used for new SKB) In this case (due to heavy load) UD2 skb pointer could be replaced by new transmitted packet UD_NEW, as the driver assumes its free. At this point we will have to process two 'wc' with same index but we have only one pointer to free. During second attempt to free the same skb we will have NULL pointer exception. 2. UD2 'wc' processing - skb freed according the index we got from 'wc', but it was already overwritten by mistake. So actually the skb that was released is the skb of the new transmitted packet and not the original one. 3. UD_NEW 'wc' processing - attempt to free already freed skb. NUll pointer exception. The fix: ----------------------------------------------------------------------- The fix is to stop using the UD ring as a placeholder for CM packets, the cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a new cyclic variables global_tx_head and global_tx_tail are introduced for managing and counting the overall outstanding sent packets, then the send queue will be stopped and waken based on these variables only. Note that no locking is needed since global_tx_head is updated in the xmit flow and global_tx_tail is updated in the NAPI flow only. A previous attempt tried to use one variable to count the outstanding sent packets, but it did not work since xmit and NAPI flows can run at the same time and the counter will be updated wrongly. Thus, we use the same simple cyclic head and tail scheme that we have today for the UD tx_ring. Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes") Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.org Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-25RDMA/ipoib: Remove can_sleep parameter from iboib_mcast_allocKamal Heib1-6/+5
can_sleep is always 0 when iboib_mcast_alloc() is called, so remove it and use GFP_ATOMIC instead of GFP_KERNEL. Link: https://lore.kernel.org/r/20200525130305.171509-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/ipoib: Add capability to switch between datagram and connected modeGary Leshner1-8/+10
This is the prerequisite modification to the ipoib ulp to allow a rdma netdev to obtain the default ndo ops for init/uninit/open/close. This is accomplished by setting the netdev ops field within the callback function passed to the netdev allocation routine which in turn was passed into the rdma netdev allocation routine. This allows the rdma netdev to call back into the ulp to create the resources required for connected mode operation. Additionally as the ulp is not re-entrant, when switching modes, the number of real tx queues is set to 1 for the connected mode. For datagram mode the number of real tx queues is set to the actual number of tx queues specified at the netdev's allocation. For the internal ulp netdev the number of tx queues defaults to 1. It is up to the rdma netdev to specify the actual number it can support. When the driver does not support a rdma netdev for acceleration, (-ENOTSUPPORTED return code or the verbs function for allocation is NULL) the ipoib ulp functions are unaffected by using the internal netdev allocated by the ipoib ulp. Link: https://lore.kernel.org/r/20200511160706.173205.19086.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/{hfi1, ipoib, rdma}: Broadcast ping sent packets which exceeded mtu sizeGary Leshner3-0/+6
When in connected mode ipoib sent broadcast pings which exceeded the mtu size for broadcast addresses. Add an mtu attribute to the rdma_netdev structure which ipoib sets to its mcast mtu size. The RDMA netdev uses this value to determine if the skb length is too long for the mtu specified and if it is, drops the packet and logs an error about the errant packet. Link: https://lore.kernel.org/r/20200511160655.173205.14546.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/ipoib: Increase ipoib Datagram mode MTU's upper limitKaike Wan2-7/+6
Currently the ipoib UD mtu is restricted to 4K bytes. Remove this limitation so that the IPOIB module can potentially use an MTU (in UD mode) that is bounded by the MTU of the underlying device. A field is added to the ib_port_attr structure to indicate the maximum physical MTU the underlying device supports. Link: https://lore.kernel.org/r/20200511160618.173205.23053.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/{rdmavt, hfi1}: Implement creation of accelerated UD QPsGary Leshner1-0/+3
Adds capability to create a qpn to be recognized as an accelerated UD QP for ipoib. This is accomplished by reserving 0x81 in byte[0] of the qpn as the prefix for these qp types and reserving qpns between 0x810000 and 0x81ffff. The hfi1 capability mask already contained a flag for the VNIC netdev. This has been renamed and extended to include both VNIC and ipoib. The rvt code to allocate qps now recognizes this flag and sets 0x81 into byte[0] of the qpn. The code to allocate qpns is modified to reset the qpn numbering when it is detected that a value is located in byte[0] for a UD QP and it is a qpn being requested for net dev use. If it is a regular UD QP then it is allowable to have bits set in byte[0] of the qpn and provide the previously normal behavior. The code to free the qpn now checks for the AIP prefix value of 0x81 and removes it from the qpn before being freed so that the lower 16 bit number can be reused. This patch requires minor changes in the IB core and ipoib to facilitate the creation of accelerated UP QPs. Link: https://lore.kernel.org/r/20200511160607.173205.11757.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-06RDMA: Allow ib_client's to fail when add() is calledJason Gunthorpe1-10/+5
When a client is added it isn't allowed to fail, but all the client's have various failure paths within their add routines. This creates the very fringe condition where the client was added, failed during add and didn't set the client_data. The core code will then still call other client_data centric ops like remove(), rename(), get_nl_info(), and get_net_dev_by_params() with NULL client_data - which is confusing and unexpected. If the add() callback fails, then do not call any more client ops for the device, even remove. Remove all the now redundant checks for NULL client_data in ops callbacks. Update all the add() callbacks to return error codes appropriately. EOPNOTSUPP is used for cases where the ULP does not support the ib_device - eg because it only works with IB. Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-04-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds3-9/+0
Pull rdma updates from Jason Gunthorpe: "The majority of the patches are cleanups, refactorings and clarity improvements. This cycle saw some more activity from Syzkaller, I think we are now clean on all but one of those bugs, including the long standing and obnoxious rdma_cm locking design defect. Continue to see many drivers getting cleanups, with a few new user visible features. Summary: - Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1 - Lots of cleanup patches for hns - Convert more places to use refcount - Aggressively lock the RDMA CM code that syzkaller says isn't working - Work to clarify ib_cm - Use the new ib_device lifecycle model in bnxt_re - Fix mlx5's MR cache which seems to be failing more often with the new ODP code - mlx5 'dynamic uar' and 'tx steering' user interfaces" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits) RDMA/bnxt_re: make bnxt_re_ib_init static IB/qib: Delete struct qib_ivdev.qp_rnd RDMA/hns: Fix uninitialized variable bug RDMA/hns: Modify the mask of QP number for CQE of hip08 RDMA/hns: Reduce the maximum number of extend SGE per WQE RDMA/hns: Reduce PFC frames in congestion scenarios RDMA/mlx5: Add support for RDMA TX flow table net/mlx5: Add support for RDMA TX steering IB/hfi1: Call kobject_put() when kobject_init_and_add() fails IB/hfi1: Fix memory leaks in sysfs registration and unregistration IB/mlx5: Move to fully dynamic UAR mode once user space supports it IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib IB/mlx5: Extend QP creation to get uar page index from user space IB/mlx5: Extend CQ creation to get uar page index from user space IB/mlx5: Expose UAR object and its alloc/destroy commands IB/hfi1: Get rid of a warning RDMA/hns: Remove redundant judgment of qp_type RDMA/hns: Remove redundant assignment of wc->smac when polling cq RDMA/hns: Remove redundant qpc setup operations RDMA/hns: Remove meaningless prints ...
2020-03-06RDMA/ipoib: reject unsupported coalescing paramsJakub Kicinski1-0/+2
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27RDMA/ipoib: Don't set constant driver versionLeon Romanovsky3-9/+0
There is no need to set driver version in in-tree kernel code. Link: https://lore.kernel.org/r/20200220071239.231800-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-1/+1
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22IB/ipoib: Add ndo operation for getting VFs GUID attributesDanit Goldberg1-0/+10
Add ndo operation to the network driver that enables configuring ipoib_get_vf_guid operation. The operation allows to get a VF port and node GUIDs. Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon1-1/+2
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds5-23/+24
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-04IB/ipoib: Add child to parent list only if device initializedValentine Fatiev1-14/+20
Despite failure in ipoib_dev_init() we continue with initialization flow and creation of child device. It causes to the situation where this child device is added too early to parent device list. Change the logic, so in case of failure we properly return error from ipoib_dev_init() and add child only in success path. Fixes: eaeb39842508 ("IB/ipoib: Move init code to ndo_init") Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/ipoib: Remove memset after vzalloc in ipoib_cm.cFuqian Huang1-1/+0
vzalloc has already zeroed the memory. So a memset is unneeded. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe1-0/+1
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25docs: infiniband: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
The InfiniBand docs are plain text with no markups. So, all we needed to do were to add the title markups and some markup sequences in order to properly parse tables, lists and literal blocks. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-18ipoib: correcly show a VF hardware addressDenis Kirjanov1-0/+1
in the case of IPoIB with SRIOV enabled hardware ip link show command incorrecly prints 0 instead of a VF hardware address. Before: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable, trust off, query_rss off ... After: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, link-state disable, trust off, query_rss off v1->v2: just copy an address without modifing ifla_vf_mac v2->v3: update the changelog Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11RDMA/ipoib: Remove check for ETH_SS_TESTKamal Heib1-2/+0
The default action for unlisted tests is "not-supported", so given that ipoib doesn't support ETH_SS_TEST, there is no need to check for it in the case statements, just let it get caught by the default: case. Fixes: e3614bc9dc44 ("IB/ipoib: Add readout of statistics using ethtool") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-07RDMA/ipoib: implement ethtool .get_link() callbackKamal Heib1-0/+1
Add support for reporting link state for ipoib net devices. $ ip l set dev mlx4_ib0 up $ ethtool mlx4_ib0 | grep Link Link detected: yes $ ip l set dev mlx4_ib0 down $ ethtool mlx4_ib0 | grep Link Link detected: no Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/ipoib: Remove check of destroy CQLeon Romanovsky1-5/+2
There are nothing to do from user side with knowledge that destroy CQ fails. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07RDMA/ipoib: Allow user space differentiate between valid dev_portLeon Romanovsky1-1/+12
Systemd triggers the following warning during IPoIB device load: mlx5_core 0000:00:0c.0 ib0: "systemd-udevd" wants to know my dev_id. Should it look at dev_port instead? See Documentation/ABI/testing/sysfs-class-net for more info. This is caused due to user space attempt to differentiate old systems without dev_port and new systems with dev_port. In case dev_port will be zero, the systemd will try to read dev_id instead. There is no need to print a warning in such case, because it is valid situation and it is needed to ensure systemd compatibility with old kernels. Link: https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L358 Cc: <stable@vger.kernel.org> # 4.19 Fixes: f6350da41dc7 ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07IB/core, ipoib: Do not overreact to SM LID change eventDennis Dalessandro1-2/+1
When IPoIB receives an SM LID change event, it reacts by flushing its path record cache and rejoining multicast groups. This is the same behavior it performs when it receives a reregistration event. This behavior is unnecessary as an SM may have database backup or synchronization mechanisms which permit the SM location or LID to change without loss of multicast membership and without impact to path records. Both opensm and the OPA FM issue reregistration events if a new SM is started (or restarted with a new config) or an SM event occurs which results in loss of multicast membership records by the SM (such as opensm failover) or the SM encounters new nodes with Active ports (such as after joining 2 fabrics by connecting switches via ISLs). Hence this event can be depended on as the trigger for IPoIB cache and multicast flushing. It appears that some drivers, such as qib, and hfi1 issue the IB_EVENT_SM_CHANGE but other drivers such as mlx4 and mlx5 do not. Empirical testing on Mellanox EDR using ibv_asyncwatch has confirmed that Mellanox EDR HCAs do not generate SM change events and that opensm does generate reregistration. An SM LID change event is generated by the mentioned drivers to reflect that sm_lid and/or sm_sl in the local port info has changed. The intent of this event is to permit applications and ULPs which have a local copy of this information (or an address handle using it) to update their information. The intent is that the reregistration event (caused by the SM via a bit in Set(PortInfo)) be used to inform nodes that they need to rejoin multicast groups, resubscribe for notices and potentially update path records. When an SM migrates or fails over, a SM LID change event can occur. In response IPoIB discards path records and multicast membership and loses connectivity until these records are restored via SA requests. In very large fabrics, it may take minutes for the SM to be ready and for the SA responses to be supplied. This can result in undesirable and unnecessary IPoIB connectivity impacts. It also can result in an unnecessary storm of SA queries from all nodes in a cluster potentially followed by yet another storm if the SM issues the reregistration request. The fact the Mellanox HCAs do not even generate this event, is further evidence that on modern IB fabrics there will be no ill side effects from the proposed changes below to reduce the reaction by 3 kernel components to this event. So these changes should be benign for Mellanox IB fabrics and will benefit OPA fabrics while also making ib_core and ULP behavor "correct" as intended by the IBTA spec and kernel RDMA event APIs. Address these issues by removing IB_EVENT_SM_CHANGE handling from ipoib. IPoIB does not locally store sm_lid nor sm_sl, so it does not need to do anything on SM LID change. IPoIB makes use of other ib_core components to issue SA requests for it and those components correctly track SM LID and SM LID changes. Also in ib_core multicast handling, remove the test for IB_EVENT_SM_CHANGE. This code is moving all multicast groups to the error state, which will trigger rejoins. This code is used by IPoIB as well as the connection manager and other clients of multicast groups. This kernel module centralizes group membership status and joins since a node can only join a given group once but multiple ULPs or applications may want to join the same group. It makes use of the sa_query.c component in ib_core, which correctly trackes SM LID and SL. This component does not track SM LID nor SL itself and hence need not react to their changes. Similarly in the ib_core cache code remove the handling for the IB_EVENT_SM_CHANGE. In this function. The ib_cache_update function which is ultimately called is updating local copies of the pkey table, gid table and lmc. It does not update nor retain sm_lid nor sm_sl. As such it does not need to be called on an SM LID change. It technically also does not need to be called on a reregistration. The LID_CHANGE, PKEY_CHANGE, GID_CHANGE and port state change events (PORT_ERR, PORT_ACTICE) should be sufficient triggers. It is worth noting that the alternative of simply having the hfi1 and qib drivers not generate the SM LID change event was explored. While this would duplicate what Mellanox drivers do now, it is not the correct behavior and removes the ability for an SM to migrate without requiring reregistration. Since both opensm and OPA SM have mechanisms to backup or synchronize registration information, it is desirable to let them perform SM migrations (with LID or SL changes) without requiring reregistration when they deem it appropriate. Suggested-by: Todd Rimmer <todd.rimmer@intel.com> Tested-by: Michael Brooks <michael.brooks@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Todd Rimmer <todd.rimmer@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19RDMA: Add and use rdma_for_each_portJason Gunthorpe1-2/+2
We have many loops iterating over all of the end port numbers on a struct ib_device, simplify them with a for_each helper. Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14IB/ipoib: Use __func__ instead of function's nameErez Alfasi1-2/+2
Changed debug statements to use %s and __func__ instead of hard-coded function's name. Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04Merge tag 'v5.0-rc5' into rdma.git for-nextJason Gunthorpe2-3/+1
Linux 5.0-rc5 Needed to merge the include/uapi changes so we have an up to date single-tree for these files. Patches already posted are also expected to need this for dependencies.
2019-01-29IB/ipoib: Make ipoib_intercept_dev_id_attr() staticKamal Heib1-1/+1
The function ipoib_intercept_dev_id_attr() is only used in ipoib_main.c Fixes: f6350da41dc7 ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25IB/ipoib: Fix for use-after-free in ipoib_cm_tx_startFeras Daoud2-3/+1
The following BUG was reported by kasan: BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020 Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib] Call Trace: dump_stack+0x9a/0xeb print_address_description+0xe3/0x2e0 kasan_report+0x18a/0x2e0 ? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] memcpy+0x1f/0x50 ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] ? kvm_clock_read+0x1f/0x30 ? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib] ? __lock_is_held+0xc2/0x170 ? process_one_work+0x880/0x1960 ? process_one_work+0x912/0x1960 process_one_work+0x912/0x1960 ? wq_pool_ids_show+0x310/0x310 ? lock_acquire+0x145/0x440 worker_thread+0x87/0xbb0 ? process_one_work+0x1960/0x1960 kthread+0x314/0x3d0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 Allocated by task 0: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x168/0x3e0 path_rec_create+0xa2/0x1f0 [ib_ipoib] ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib] dev_hard_start_xmit+0x159/0x8d0 sch_direct_xmit+0x226/0xb40 __dev_queue_xmit+0x1d63/0x2950 neigh_update+0x889/0x1770 arp_process+0xc47/0x21f0 arp_rcv+0x462/0x760 __netif_receive_skb_core+0x1546/0x2da0 netif_receive_skb_internal+0xf2/0x590 napi_gro_receive+0x28e/0x390 ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib] ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib] net_rx_action+0x427/0xe30 __do_softirq+0x28e/0xc42 Freed by task 26680: __kasan_slab_free+0x11d/0x160 kfree+0xf5/0x360 ipoib_flush_paths+0x532/0x9d0 [ib_ipoib] ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib] set_mode+0xc8/0x150 [ib_ipoib] kernfs_fop_write+0x279/0x440 __vfs_write+0xd8/0x5c0 vfs_write+0x15e/0x470 ksys_write+0xb8/0x180 do_syscall_64+0x9b/0x420 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88034c30bcc8 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff88034c30bcc8, ffff88034c30bec8) The buggy address belongs to the page: The following race between change mode and xmit flow is the reason for this use-after-free: Change mode Send packet 1 to GID XX Send packet 2 to GID XX | | | start | | | | | | | | | Create new path for GID XX | | and update neigh path | | | | | | | | | | flush_paths | | | | queue_work(cm.start_task) | | Path for GID XX not found | create new path | | start_task runs with old released path There is no locking to protect the lifetime of the path through the ipoib_cm_tx struct, so delete it entirely and always use the newly looked up path under the priv->lock. Fixes: 546481c2816e ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-24infiniband: ipoib: no need to check return value of debugfs_create functionsGreg Kroah-Hartman3-11/+4
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-02IB/ipoib: drop useless LIST_HEADJulia Lawall1-1/+0
Drop LIST_HEAD where the variable it declares is never used. Commit 31c02e215700 ("IPoIB: Avoid using stale last_send counter when reaping AHs") removed the uses, but not the declaration. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 31c02e215700 ("IPoIB: Avoid using stale last_send counter when reaping AHs") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-4/+4
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-19RDMA: Mark if destroy address handle is in a sleepable contextGal Pressman1-1/+1
Introduce a 'flags' field to destroy address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA: Mark if create address handle is in a sleepable contextGal Pressman1-1/+1
Introduce a 'flags' field to create address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA: Start use ib_device_opsKamal Heib1-2/+2
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-06net: core: dev: Add extack argument to dev_change_flags()Petr Machata1-3/+3
In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_change_flags(). Therefore extend dev_change_flags() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available. Since the function declaration line is changed anyway, name the other function arguments to placate checkpatch. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds3-4/+42
Pull rdma updates from Jason Gunthorpe: "This has been a smaller cycle with many of the commits being smallish code fixes and improvements across the drivers. - Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and rxe - Memory window support in hns - mlx5 user API 'flow mutate/steering' allows accessing the full packet mangling and matching machinery from user space - Support inter-working with verbs API calls in the 'devx' mlx5 user API, and provide options to use devx with less privilege - Modernize the use of syfs and the device interface to use attribute groups and cdev properly for uverbs, and clean up some of the core code's device list management - More progress on net namespaces for RDMA devices - Consolidate driver BAR mmapping support into core code helpers and rework how RDMA holds poitners to mm_struct for get_user_pages cases - First pass to use 'dev_name' instead of ib_device->name - Device renaming for RDMA devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits) IB/mlx5: Add support for extended atomic operations RDMA/core: Fix comment for hw stats init for port == 0 RDMA/core: Refactor ib_register_device() function RDMA/core: Fix unwinding flow in case of error to register device ib_srp: Remove WARN_ON in srp_terminate_io() IB/mlx5: Allow scatter to CQE without global signaled WRs IB/mlx5: Verify that driver supports user flags IB/mlx5: Support scatter to CQE for DC transport type RDMA/drivers: Use core provided API for registering device attributes RDMA/core: Allow existing drivers to set one sysfs group per device IB/rxe: Remove unnecessary enum values RDMA/umad: Use kernel API to allocate umad indexes RDMA/uverbs: Use kernel API to allocate uverbs indexes RDMA/core: Increase total number of RDMA ports across all devices IB/mlx4: Add port and TID to MAD debug print IB/mlx4: Enable debug print of SMPs RDMA/core: Rename ports_parent to ports_kobj RDMA/core: Do not expose unsupported counters IB/mlx4: Refer to the device kobject instead of ports_parent RDMA/nldev: Allow IB device rename through RDMA netlink ...
2018-10-16IB/ipoib: Clear IPCB before icmp_sendDenis Drozdov1-2/+6
IPCB should be cleared before icmp_send, since it may contain data from previous layers and the data could be misinterpreted as ip header options, which later caused the ihl to be set to an invalid value and resulted in the following stack corruption: [ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping [ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping [ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping [ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping [ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034387] ================================================================== [ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310 [ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7 [ 1083.034990] [ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1 [ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib] [ 1083.035750] Call Trace: [ 1083.035888] dump_stack+0x9a/0xeb [ 1083.036031] print_address_description+0xe3/0x2e0 [ 1083.036213] kasan_report+0x18a/0x2e0 [ 1083.036356] ? __ip_options_echo+0xf08/0x1310 [ 1083.036522] __ip_options_echo+0xf08/0x1310 [ 1083.036688] icmp_send+0x7b9/0x1cd0 [ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070 [ 1083.037018] ? netif_schedule_queue+0x5/0x200 [ 1083.037180] ? debug_show_all_locks+0x310/0x310 [ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120 [ 1083.037519] ? debug_locks_off+0x11/0x80 [ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6 [ 1083.037841] ? check_flags.part.27+0x450/0x450 [ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6 [ 1083.038169] ? debug_locks_off+0x11/0x80 [ 1083.038318] ? skb_dequeue+0x10e/0x1a0 [ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib] [ 1083.038642] ? netif_schedule_queue+0xa8/0x200 [ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.039174] process_one_work+0x912/0x1830 [ 1083.039336] ? wq_pool_ids_show+0x310/0x310 [ 1083.039491] ? lock_acquire+0x145/0x3a0 [ 1083.042312] worker_thread+0x87/0xbb0 [ 1083.045099] ? process_one_work+0x1830/0x1830 [ 1083.047865] kthread+0x322/0x3e0 [ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 1083.053354] ret_from_fork+0x3a/0x50 For instance __ip_options_echo is failing to proceed with invalid srr and optlen passed from another layer via IPCB [ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0 [ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533 [ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84 [ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0 [ 762.140269] ================================================================== [ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0 [ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680 [ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7 Signed-off-by: Denis Drozdov <denisd@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-10RDMA/netdev: Fix netlink support in IPoIBDenis Drozdov4-65/+108
IPoIB netlink support was broken by the below commit since integrating the rdma_netdev support relies on an allocation flow for netdevs that was controlled by the ipoib driver while netdev's rtnl_newlink implementation assumes that the netdev will be allocated by netlink. Such situation leads to crash in __ipoib_device_add, once trying to reuse netlink device. This patch fixes the kernel oops for both mlx4 and mlx5 devices triggered by the following command: Fixes: cd565b4b51e5 ("IB/IPoIB: Support acceleration options callbacks") Signed-off-by: Denis Drozdov <denisd@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10RDMA/netdev: Hoist alloc_netdev_mqs out of the driverDenis Drozdov1-13/+8
netdev has several interfaces that expect to call alloc_netdev_mqs from the core code, with the driver only providing the arguments. This is incompatible with the rdma_netdev interface that returns the netdev directly. Thus re-organize the API used by ipoib so that the verbs core code calls alloc_netdev_mqs for the driver. This is done by allowing the drivers to provide the allocation parameters via a 'get_params' callback and then initializing an allocated netdev as a second step. Fixes: cd565b4b51e5 ("IB/IPoIB: Support acceleration options callbacks") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Denis Drozdov <denisd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-26RDMA/ulp: Use dev_name instead of ibdev->nameJason Gunthorpe1-1/+1
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
2018-09-13IB/ipoib: Log sysfs 'dev_id' accesses from userspaceArseny Maslennikov1-0/+31
Some tools may currently be using only the deprecated attribute; let's print an elaborate and clear deprecation notice to kmsg. To do that, we have to replace the whole sysfs file, since we inherit the original one from netdev. Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-13IB/ipoib: Use dev_port to expose network interface port numbersArseny Maslennikov1-0/+2
Some InfiniBand network devices have multiple ports on the same PCI function. This initializes the `dev_port' sysfs field of those network interfaces with their port number. Prior to this the kernel erroneously used the `dev_id' sysfs field of those network interfaces to convey the port number to userspace. The use of `dev_id' was considered correct until Linux 3.15, when another field, `dev_port', was defined for this particular purpose and `dev_id' was reserved for distinguishing stacked ifaces (e.g: VLANs) with the same hardware address as their parent device. Similar fixes to net/mlx4_en and many other drivers, which started exporting this information through `dev_id' before 3.15, were accepted into the kernel 4 years ago. See 76a066f2a2a0 (`net/mlx4_en: Expose port number through sysfs'). Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-06IB/ipoib: Ensure that MTU isn't less than minimum permittedMuhammad Sammar1-1/+2
It is illegal to change MTU to a value lower than the minimum MTU stated in ethernet spec. In addition to that we need to add 4 bytes for encapsulation header (IPOIB_ENCAP_LEN). Before "ifconfig ib0 mtu 0" command, succeeds while it obviously shouldn't. Signed-off-by: Muhammad Sammar <muhammads@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handlerAaron Knister1-0/+2
Inside of start_xmit() the call to check if the connection is up and the queueing of the packets for later transmission is not atomic which leaves a window where cm_rep_handler can run, set the connection up, dequeue pending packets and leave the subsequently queued packets by start_xmit() sitting on neigh->queue until they're dropped when the connection is torn down. This only applies to connected mode. These dropped packets can really upset TCP, for example, and cause multi-minute delays in transmission for open connections. Here's the code in start_xmit where we check to see if the connection is up: if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); goto unref; } } The race occurs if cm_rep_handler execution occurs after the above connection check (specifically if it gets to the point where it acquires priv->lock to dequeue pending skb's) but before the below code snippet in start_xmit where packets are queued. if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { push_pseudo_header(skb, phdr->hwaddr); spin_lock_irqsave(&priv->lock, flags); __skb_queue_tail(&neigh->queue, skb); spin_unlock_irqrestore(&priv->lock, flags); } else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } The patch acquires the netif tx lock in cm_rep_handler for the section where it sets the connection up and dequeues and retransmits deferred skb's. Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Cc: stable@vger.kernel.org Signed-off-by: Aaron Knister <aaron.s.knister@nasa.gov> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-02IB/ipoib: Consolidate checking of the proposed child interfaceJason Gunthorpe2-28/+52
Move all the checking for pkey and other validity to the __ipoib_vlan_add function. This removes the last difference from the control flow of the __ipoib_vlan_add to make the overall design simpler to understand. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-08-02IB/ipoib: Maintain the child_intfs list from ndo_init/uninitJason Gunthorpe3-26/+16
This fixes a bug in the netlink path where the vlan_rwsem was not held around __ipoib_vlan_add causing the child_intfs to be manipulated unsafely. In the process this greatly simplifies the vlan_rwsem write side locking to only cover a single non-sleeping statement. This also further increases the safety of the removal ordering by holding the netdev of the parent while the child is active to ensure most bugs become either an oops on a NULL priv or a deadlock on the netdev refcount. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 09:32:21 +0000