summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)AuthorFilesLines
2017-02-19Merge branch 'k.o/for-4.10-rc' into HEADDoug Ledford16-161/+229
2017-02-15IB/mlx5: Fix configuration of port capabilitiesEli Cohen1-0/+35
When the "ib_virt" cap is set, configuration of port capabilities need to be done through mlx5_core_modify_hca_vport_context. Since modify_hca_vport_context accepts mask and value, there is no need to read the port capabilities and calculate the new cap values so we avoid the mutex when ib_virt is set. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Take source GID by index from HW GID tableTalat Batheesh1-24/+32
Previously, we used the HW GID index in order to search the source GID in the software GID cached table. In some cases, for example when the MAC Address of the network interface is changed, the GID cached table saves the old-IPv6-link-local GID at the end of the table. When returning the old MAC address, the software GID cached table tries to add the new IPv6-link-local GID, and when it identifies that the GID already exists, the software GID cached does not add it. Thus a mismatch occurs between the HW and the SW GID tables. It resulted with sending traffic with the wrong source GID. This commit fixes the issue by taking both from the HW table. The problem can be reproduced with the following scenario: Client: # ifconfig ens6 2.2.2.5 # ifconfig ens6 inet6 add 2001:0db8:0:f101::5/64 # ifconfig ens6 hw ether f4:52:14:61:a0:71 # ifconfig ens6 inet6 del 2001:0db8:0:f101::5/64 # ifconfig ens6 inet6 add 2001:0db8:0:f101::5/64 # ucmatose -f ipv6 -b 2001:0db8:0:f101::5 -s 2001:0db8:0:f101::6 -p 20156 Server: # ucmatose -f ipv6 -b 2001:0db8:0:f101::6 -p 20156 Fixes: 4c3eb3ca1396 ('IB/mlx4: Add VLAN support for IBoE') Signed-off-by: Talat Batheesh <talatb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Fix blue flame buffer size calculationEli Cohen1-1/+4
A blue flame register is comprised of two buffers of equal size. Fixes: 5fe9dec0d0454 ("IB/mlx5: Use blue flame register allocator in mlx5_ib") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Remove unused variable from function declarationLeon Romanovsky1-2/+2
Remove unused netw_view parameter from eth_link_query_port() function. Reported-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB: Query ports via the core instead of direct into the driverOr Gerlitz20-49/+65
Change the drivers to call ib_query_port in their get port immutable handler instead of their own query port handler. Doing this required to set the core cap flags of this device before the ib_query_port call is made, since the IB core might need these caps to serve the port query. Drivers are ensured by the IB core that the port attributes passed to the port query verb implementation are zero, and hence we removed the zeroing from the drivers. This patch doesn't add any new functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB: Add protocol for USNICOr Gerlitz1-0/+1
Add protocol definition for the proprietary the USNIC driver. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Support raw packet protocolOr Gerlitz1-2/+5
Mark support for the new raw packet protocol on Eth ports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Support raw packet protocolOr Gerlitz1-2/+4
Mark support for the new raw packet protocol on Eth ports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add implicit MR supportArtemy Kovalyov4-49/+511
Add implicit MR, covering entire user address space. The MR is implemented as an indirect KSM MR consisting of 1GB direct MRs. Pages and direct MRs are added/removed to MR by ODP. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Expose MR cache for mlx5_ibArtemy Kovalyov2-28/+80
Allow other parts of mlx5_ib to use MR cache mechanism. * Add new functions mlx5_mr_cache_alloc and mlx5_mr_cache_free * Traditional MTT MKey buckets are limited by MAX_UMR_CACHE_ENTRY Additinal buckets may be added above. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add null_mkey accessArtemy Kovalyov3-1/+89
Add mlx5_cmd_null_mkey() function to access null_mkey information from firmware. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Support creation of a WQ with scatter FCS offloadNoa Osherovich1-2/+11
Add support for creation of a WQ with scatter FCS capability, if this capability is supported by the hardware. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Enable QP creation with cvlan offloadNoa Osherovich2-1/+18
Enable creating a RAW Ethernet QP with cvlan stripping offload when it's supported by the hardware. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Enable WQ creation and modification with cvlan offloadNoa Osherovich1-1/+29
Allow creating a WQ with cvlan stripping considering device's capabilities. The default value was fixed to disable vlan stripping till was asked explicitly. In addition, allow modification of a WQ to turn on/off this property. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Expose vlan offloads capabilitiesNoa Osherovich1-2/+12
Check device's capabilities and report which raw packet capabilities are supported. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add port counter support for Receive WQsMajd Dibbiny1-1/+11
Counters weren't updated due to Receive WQs' traffic since the counter-id was not associated with the RQ. Added support for associating the q-counter-id with the Receive WQ. The attachment is done only when changing WQ's state from RESET to READY in modify-WQ command. FW support is required for the above, without this support Receive WQ counters will not count. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Expose Q counters groups only if they are supported by FWKamal Heib3-43/+128
This patch modify the Q counters implementation, so each one of the three Q counters groups will be exposed by the driver only if they are supported by the firmware. Signed-off-by: Kamal Heib <kamalh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Replace ENOTSUPP usage with EOPNOTSUPPLeon Romanovsky1-6/+6
Flow steering is supposed to return EOPNOTSUPP error for unsupported fields and not ENOTSUPP error. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add flow tag supportMoses Reuben1-3/+23
Set flow tag in flow table entry, when IB_FLOW_SPEC_ACTION_TAG is part of the flow specifications. Flow tag doesn't support multicast flows, so it's passing to hardware only when used. Signed-off-by: Moses Reuben <mosesr@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Remove deprecated module parameterLeon Romanovsky1-7/+0
Commit 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") moved prof_sel module parameter from mlx5_ib to mlx5_core and marked it as deprecated in 2014. Three years after deprecation, it is time to remove the deprecated module parameter. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Assign DSCP for R-RoCE QPs Address PathMajd Dibbiny3-0/+30
For Routable RoCE QPs, the DSCP should be set in the QP's address path. The DSCP's value is derived from the traffic class. Fixes: 2811ba51b049 ("IB/mlx5: Add RoCE fields to Address Vector") Cc: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Avoid SMP MADs from VFsMaor Gottlieb1-0/+6
According to the device specification, we need to check that the has_smi bit is set in vport context before allowing send SMP MADs from VF. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add additional checks before processing MADsMaor Gottlieb2-0/+45
Check the has_smi bit in vport context and class version of MADs before allowing MADs processing to take place. MAD_IFC SMI commands can be executed only if smi bit is set. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Parvi Kaustubhi <parvik@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Verify that Q counters are supportedKamal Heib1-5/+9
Make sure that the Q counters are supported by the FW before trying to allocate/deallocte them, this will avoid driver load failure when they aren't supported by the FW. Fixes: 0837e86a7a34 ('IB/mlx5: Add per port counters') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Kamal Heib <kamalh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Return error for unsupported signature typeLeon Romanovsky1-2/+3
In case of unsupported singature, we returned positive value, while the better approach is to return -EINVAL. In addition, in this change, the error print is enriched to provide an actual supplied signature type. Fixes: e6631814fb3a ("IB/mlx5: Support IB_WR_REG_SIG_MR") Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Fix out-of-bound accessLeon Romanovsky1-8/+3
When we initialize buffer to create SRQ in kernel, the number of pages was less than actually used in following mlx5_fill_page_array(). Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14RDMA/bnxt_re: Add bnxt_re driver build supportSelvin Xavier3-0/+16
Makefile and Kconfig changes for enabling bnxt_re compilation Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14RDMA/bnxt_re: Add bnxt_re RoCE driverSelvin Xavier13-0/+13258
This patch introduces the RoCE driver for the Broadcom NetXtreme-E 10/25/40/50G RoCE HCAs. The RoCE driver is a two part driver that relies on the parent bnxt_en NIC driver to operate. The changes needed in the bnxt_en driver have already been incorporated via Dave Miller's net tree into the mainline kernel. The vendor official git repository for this driver is available on github as: https://github.com/Broadcom/linux-rdma-nxt/ Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-06net/mlx5: TX WQE updateSaeed Mahameed1-3/+3
Add new TX WQE fields for Connect-X5 vlan insertion support, type and vlan_tci, when type = MLX5_ETH_WQE_INSERT_VLAN the HW will insert the vlan and prio fields (vlan_tci) to the packet. Those bits and the inline header fields are mutually exclusive, and valid only when: MLX5_CAP_ETH(mdev, wqe_inline_mode) == MLX5_CAP_INLINE_MODE_NOT_REQUIRED and MLX5_CAP_ETH(mdev, wqe_vlan_insert), who will be set in ConnectX-5 and later HW generations. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2017-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller16-161/+229
Two trivial overlapping changes conflicts in MPLS and mlx5. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24i40iw: Set maj_err and min_err in i40iw_sc_cqp_createShiraz Saleem1-0/+3
Set maj_err and min_err in i40iw_sc_cqp_create so that it returns correct values for all return cases. This also addresses an uninitialized variable warning for maj_err and min_err in i40iw_create_cqp. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24IB/qib: Remove empty functionLeon Romanovsky3-12/+0
Commit f06267104dd9 ("RDMA: Update workqueue usage") removed content of qib_qsfp_deinit(...) and left it empty. This patch deletes all leftovers of that function. Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24i40iw: fix some indenting in i40iw_sc_vsi_init()Dan Carpenter1-3/+3
The debug printk was indented more than it should have been and we can remove an unnecessary line break. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Dispatch port active event from qedr_addRam Amrani2-6/+19
Relying on qede to trigger qedr on startup is problematic. When probing both if qedr loads slowly then qede can assume qedr is missing and not trigger it. This patch adds a triggering from qedr and protects against a race via an atomic bit. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Fix and simplify memory leak in PD allocRam Amrani1-8/+18
Free the PD if no internal resources were available. Move userspace code under the relevant 'if'. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Fix RDMA CM loopbackRam Amrani1-2/+2
The loopback logic in RDMA CM packets compares Ethernet addresses and was accidently inverse. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Fix formattingRam Amrani2-3/+1
Remove standalone ';'. List function's parameters in a single line. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Mark three functions as staticRam Amrani1-6/+8
mark qedr_get_state_from_ibqp(), __qedr_alloc_mr() and __qedr_post_send() as static since they are only used in the same file. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Don't reset QP when queues aren't flushedRam Amrani1-0/+8
Fail QP state transition from error to reset if SQ/RQ are not empty and still in the process of flushing out the queued work entries. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Don't spam dmesg if QP is in error stateRam Amrani1-3/+4
It is normal to flush CQEs if the QP is in error state. Hence there's no use in printing a message per CQE to dmesg. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Remove CQ spinlock from CM completion handlersRam Amrani2-11/+2
There is only a single event queue that triggers the completion events for the RDMA CM and it is being processed serially. This means that inherently there can no parallelism of CQ completion handler callbacks, hence the lock is redundant. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Return max inline data in QP query resultRam Amrani1-1/+1
Return the maximum supported amount of inline data, not the qp's current configured inline data size, when filling out the results of a query qp call. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Return success when not changing QP stateRam Amrani1-1/+1
If the user is requesting us to change the QP state to the same state that it is already in, return success instead of failure. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/qedr: Fix MTU returned from QP queryAmrani, Ram1-1/+1
MTU value returned from QP query should include overhead. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/core: Add the function ib_mtu_int_to_enumAmrani, Ram4-41/+4
As the functionality to convert the MTU from a number to enum_ib_mtu is ubiquitous, define a dedicated function and remove the duplicated code. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24iw_cxgb4: Guard against null cm_id in dump_ep/qpGanesh Goudar1-49/+84
Endpoints that are aborting can have already dereferenced the cm_id and set ep->com.cm_id to NULL. So guard against that in dump_ep() and dump_qp(). Also create a common function for setting up ip address pointers since the same logic is needed in several places. Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24IB/vmw_pvrdma: Remove unused qp_typeYuval Shaia1-3/+2
Remove the unused qp_type parameter from function's args Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24IB/vmw_pvrdma: Fix incorrect cleanup on pvrdma_pci_probe error pathAdit Ranadive1-3/+1
If the interrupt allocation failed we should start freeing the CQ rings rather than unregistering the netdev notifier. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Signed-off-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24IB/vmw_pvrdma: Don't leak info from alloc_ucontextAdit Ranadive1-1/+1
Clear out the user response struct correctly. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-01 04:18:55 +0000