summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ocrdma/ocrdma.h
AgeCommit message (Collapse)AuthorFilesLines
2016-02-29RDMA/ocrdma: Support RoCE-v2 in the UD pathDevesh Sharma1-0/+1
This patch adds following changes to support RoCE-v2 in the UD path. * During AH creation GID-type is resolved for a given gid-index. * Based on GID-type protocol header is built. * Work completion reports network header type and set IB_WC_WITH_NETWORK_HDR_TYPE flag in wc->wc_flags to indicate that the network header type is valid. Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29RDMA/ocrdma: Export udp encapsulation capabilitySomnath Kotur1-0/+7
Add support to read device configuration and initialize port-immutables to report UDP-Encap flag during port query. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-17RDMA/ocrdma: Fix arm logic to align with new cq APIDevesh Sharma1-3/+0
Today ocrdma driver defer arming the CQ till poll is called. This was used to prevent calling poll-cq on an armed CQ. Recently a set of new CQ API has been introduced into the linux kernel. The implementation of this API guarantees that a given CQ is never armed before calling poll on it. Most of the kernel ULPs have already moved to use this new API or have a code where poll is called before arming the CQ. Thus, the above workaround in ocrdma is not needed anymore. This patch removes the additional logic to deffer arm till poll is called. This patch adds a simple scheme where ib_req_notify_cq() will actually arm the cq. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-28RDMA/ocrdma: Depend on async link events from CNADevesh Sharma1-0/+10
Recently Dough Ledford reported a deadlock happening between ocrdma-load sequence and NetworkManager service issuing "open" on be2net interface. The deadlock happens when any be2net hook (e.g. open/close) is called in parallel to insmod ocrdma.ko. A. be2net is sending administrative open/close event to ocrdma holding device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net. So sequence of locks is rtnl_lock---> device_list lock B. When new ocrdma roce device gets registered, infiniband stack now takes rtnl_lock in ib_register_device() in GID initialization routines. So sequence of locks in this path is device_list lock ---> rtnl_lock. This improper locking sequence causes deadlock. With this patch we stop using administrative open and close events injected by be2net driver. These events were used to dispatch PORT_ACTIVE and PORT_ERROR events to the IB-stack. This patch implements a logic to receive async-link-events generated from CNA whenever link-state-change is detected. Now on, these async-events will be used to dispatch PORT_ACTIVE and PORT_ERROR events to IB-stack. Depending on async-events from CNA removes the need to hold device-list-mutex and thus breaks the busy-wait scenario. Reported-by: Doug Ledford <dledford@redhat.com> CC: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28RDMA/ocrdma: Support the new memory registration APISagi Grimberg1-0/+2
Support the new memory registration API by allocating a private page list array in ocrdma_mr and populate it when ocrdma_map_mr_sg is invoked. Also, support IB_WR_REG_MR by duplicating IB_WR_FAST_REG_MR, but take the needed information from different places: - page_size, iova, length, access flags (ib_mr) - page array (ocrdma_mr) - key (ib_reg_wr) The IB_WR_FAST_REG_MR handlers will be removed later when all the ULPs will be converted. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21RDMA/ocrdma: Bump up ocrdma version number to 11.0.0.0Selvin Xavier1-1/+1
Updating the version number to 11.0.0.0 Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21RDMA/ocrdma: Cleanup unused device list and rcu variablesSelvin Xavier1-1/+0
ocrdma_dev_list is not used by the driver. So removing the references of this variable. dev->rcu was introduced for the ipv6 notifier for GID management. This is no longer required as the GID management is outside the HW driver. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30RDMA/ocrdma: Incorporate the moving of GID Table mgmt to IB/CoreSomnath Kotur1-1/+0
1.Change query_gid hook to return value from IB/Core GID management APIs. 2.Get rid of all the netdev notifier chain subscription code as well as maintenance of SGID Table in memory. 3.Implement get_netdev hook in driver. Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-24RDMA/ocrdma: update ocrdma license to dual-licenseDevesh Sharma1-19/+34
Change of license from GPLv2 to dual-license (GPLv2 and BSD 2-Clause) All contributors were contacted off-list and permission to make this change was received. The complete list of contributors are Cc:ed here. Cc: Tejun Heo <tj@kernel.org> Cc: Duan Jiong <duanj.fnst@cn.fujitsu.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Cc: Sasha Levin <levinsasha928@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Moni Shoua <monis@mellanox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Li RongQing <roy.qing.li@gmail.com> Cc: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Update ocrdma version numberSelvin Xavier1-1/+1
Updating the driver version to 10.6.0.0 Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix dmac resolution for link local addressMitesh Ahuja1-0/+2
rdma_addr_find_dmac_by_grh fails to resolve dmac for link local address. Use rdma_get_ll_mac to resolve the link local address. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-02-18RDMA/ocrdma: Update the ocrdma module version stringMitesh Ahuja1-1/+1
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: remove reference of ocrdma_dev out of ocrdma_qp structureMitesh Ahuja1-1/+0
Use get_ocrdma_dev(ocrdma_qp->ibqp.device) function to access ocrdma device pointer. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Add support for interrupt moderationMitesh Ahuja1-0/+14
Add support for interrupt moderation for ocrdma device. Thresholds for high interrupt rates are static values derived based on experimental results. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Debugfs enhancments for ocrdma driverSelvin Xavier1-0/+4
1. Add statistics counters for error cqes. 2. Add file ("reset_stats") to reset rdma stats in Debugfs. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Move PD resource management to driver.Mitesh Ahuja1-0/+17
Move PD allocation and deallocation from firmware to driver. At driver load time all the PDs will be requested from firmware and their management will be handled by driver to reduce mailbox commands overhead at runtime. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Update the ocrdma module version stringSelvin Xavier1-1/+1
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Increase the size of STAG array in dev structure to 16KSelvin Xavier1-1/+1
HW can support 16K STAG entries. Change this max limit. Also, move this array out of ocrdma_dev to reduce the size of this structure. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Do proper cleanup even if FW is in error stateMitesh Ahuja1-0/+1
If any mailbox command reports timeout, save the state in the driver, to prevent issuing any more commands to the HW. Do proper cleanup even if FW is in error state. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Query and initalize the PFC SLSelvin Xavier1-0/+21
This patch implements routine to query the PFC priority from the adapter port. Following are the changes implemented: * A new FW command is implemented to query the operational/admin DCBX configuration from the FW and obtain active priority(service level). * Adds support for the async event reported by FW when the PFC priority changes. Service level is re-initialized during modify_qp or create_ah, based on this event. * Maintain SL value in ocrdma_dev structure and refer that as and when needed. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Code clean-upDevesh Sharma1-4/+2
Clean up code. Also modifying GSI QP to error during ocrdma_close is fixed. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Query controller informationSelvin Xavier1-0/+61
Issue mailbox commands to query ocrdma controller information and phy information and print them while adding ocrdma device. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Display proper value for max_mwSelvin Xavier1-0/+1
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Update version stringDevesh Sharma1-1/+3
Update the driver vrsion string and node description string Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Read ASIC_ID register to select asic_genDevesh Sharma1-0/+13
ocrdma driver selects execution path based on sli_family and asic generation number. This introduces code to read the asic gen number from pci register instead of obtaining it from the Emulex NIC driver. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: SQ and RQ doorbell offset clean upDevesh Sharma1-7/+0
Introducing new macros to define SQ and RQ doorbell offset. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: EQ full catastrophe avoidanceDevesh Sharma1-2/+16
Stale entries in the CQ being destroyed causes hardware to generate EQEs indefinitely for a given CQ. Thus causing uncontrolled execution of irq_handler. This patch fixes this using following sementics: * irq_handler will ring EQ doorbell atleast once and implement budgeting scheme. * cq_destroy will count number of valid entires during destroy and ring cq-db so that hardware does not generate uncontrolled EQE. * cq_destroy will synchronize with last running irq_handler instance. * arm_cq will always defer arming CQ till poll_cq, except for the first arm_cq call. * poll_cq will always ring cq-db with arm=SET if arm_cq was called prior to enter poll_cq. * poll_cq will always ring cq-db with arm=UNSET if arm_cq was not called prior to enter poll_cq. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19RDMA/ocrdma: Handle Ethernet L2 parameters for IP based GID addressingMoni Shoua1-0/+12
This patch is similar in spirit to the "IB/mlx4: Handle Ethernet L2 parameters for IP based GID addressing". It handles the fact that IP based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN. When building an address handle, instead of parsing the dgid to get the MAC and VLAN, take them from the address handle attributes. Cc: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08RDMA/ocrdma: Fix a crash in rmmodNaresh Gottumukkala1-26/+27
1) ocrdma_remove_free() is called from a call_rcu callback funtion context, which can be a bottom-half context. So the code in ocrdma_remove_free should not sleep. But ocrdma_cleanup_hw() can sleep, So move it ocrdma_remove() instead of ocrdma_remove_free. 2) Fix a couple of kbuild test robot warnings. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fill PVID in UMC caseNaresh Gottumukkala1-0/+1
In UMC case, driver needs to fill PVID in the address vector template for UD traffic. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Dont use PD 0 for userpace CQ DBNaresh Gottumukkala1-0/+3
Create_CQ verb doesn't provide a PD pointer. So, until now we are creating all (both userspace and kernel) CQ DB regions from PD0. This will result in mmapping PD0 to applications. A rogue userspace application can mess things up. Also more serious issues is even the be2net NIC uses PD0. This patch addresses this problem by: 1) Create a PD page for every userspace application when the alloc_ucontext is called. This will be destroyed in dealloc_ucontext. 2) All CQs for that context will use the PD allocated in ucontext. 3) The first create_PD call from application will result in returning the PD address from its ucontext (no new PD will be created). 4) For subsecquent create_pd calls from application, we create new PDs for the application. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: FRMA code cleanupNaresh Gottumukkala1-0/+1
1) Fixed setting FR_MR bit for FRWR stag allocation 2) Access rights are passsed during FRWR stage and not during STAT allocation stage 3) FRWR WQE structure cleanup 4) Add QP level signaled bit. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix to work with even a single MSI-X vectorNaresh Gottumukkala1-2/+1
There are cases like SRIOV where can get only one MSI-X vector allocated for RoCE. In that case we need to use the vector for both data plane and control plane. We need to use EQ create version V2. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Add support for fast register work requests (FRWR)Naresh Gottumukkala1-0/+2
Also get the max_srq value from query_config mailbox response. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Create IRD queue fixNaresh Gottumukkala1-1/+1
1) Fix ocrdma_get_num_posted_shift for upto 128 QPs. 2) Create for min of dev->max_wqe and requested wqe in create_qp. 3) As part of creating ird queue, populate with basic header templates. 4) Make sure all the DB memory allocated to userspace are page aligned. 5) Fix issue in checking the mmap local cache. 6) Some code cleanup. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Cache recv DB until QP moved to RTRNaresh Gottumukkala1-0/+2
1) In post recv, don't ring the DB doorbell if the QP is in RTR state. Cache the DB calls, until the QP is moved to RTS state. 2) Add max_rd_sge support to dev->attr. 3) Code cleanup in alloc_pd path. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Remove redundant dev referenceNaresh Gottumukkala1-5/+0
Remove redundant dev reference from structures: 1) ocrdma_cq. 2) ocrdma_ah. 3) ocrdma_hw_mr. 4) ocrdma_mw. 5) ocrdma_srq. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Style and redundant code cleanupNaresh Gottumukkala1-2/+1
Code cleanup and remove redundant code: 1) redundant initialization removed 2) braces changed as per CodingStyle. 3) redundant checks removed 4) extra braces in return statements removed. 5) removed unused pd pointer from mr. 6) reorganized get_dma_mr() 7) fixed set_av() to return error on invalid sgid index. 8) reference to ocrdma_dev removed from struct ocrdma_pd. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ocrdma: Reorg structures to avoid paddingNaresh Gottumukkala1-6/+8
Reorg structures to better packing to avoid cacheline padding. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ocrdma: Change macros to inline funtionsNaresh Gottumukkala1-4/+39
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ocrdma: Replace ocrdma_err with pr_errNaresh Gottumukkala1-2/+0
Remove private macro ocrdma_err and replace with standard pr_err. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ocrdma: Remove use_cnt for queuesGottumukkala, Naresh1-4/+0
Remove use_cnt. Rely on IB midlayer to keep track of the use count. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-11RDMA/ocrdma: Correct queue SGE calculationMahesh Vardhamanaiah1-0/+1
Fix max sge calculation for sq, rq, srq for all hardware types. Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-29RDMA/ocrdma: Correct queue free count mathParav Pandit1-1/+0
Correct queue free count math for SQ, RQ for all hardware type. Update user-kernel ABI interface. Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Don't sleep in atomic notifier handlerSasha Levin1-0/+1
Events sent to ocrdma_inet6addr_event() are sent from an atomic context, therefore we can't try to lock a mutex within the notifier callback. We could just switch the mutex to a spinlock since all it does it protect a list, but I've gone ahead and switched the list to use RCU instead. I couldn't fully test it since I don't have IB hardware, so if it doesn't fully work for some reason let me know and I'll switch it back to using a spinlock. Signed-off-by: Sasha Levin <levinsasha928@gmail.com> [ Fixed locking in ocrdma_add(). - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapterParav Pandit1-0/+392
Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 08:58:46 +0000