summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx5
AgeCommit message (Collapse)AuthorFilesLines
2019-11-30Merge tag 'for-linus-hmm' of ↵Linus Torvalds3-33/+27
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is another round of bug fixing and cleanup. This time the focus is on the driver pattern to use mmu notifiers to monitor a VA range. This code is lifted out of many drivers and hmm_mirror directly into the mmu_notifier core and written using the best ideas from all the driver implementations. This removes many bugs from the drivers and has a very pleasing diffstat. More drivers can still be converted, but that is for another cycle. - A shared branch with RDMA reworking the RDMA ODP implementation - New mmu_interval_notifier API. This is focused on the use case of monitoring a VA and simplifies the process for drivers - A common seq-count locking scheme built into the mmu_interval_notifier API usable by drivers that call get_user_pages() or hmm_range_fault() with the VA range - Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev drivers to the new API. This deletes a lot of wonky driver code. - Two improvements for hmm_range_fault(), from testing done by Ralph" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap mm/hmm: make full use of walk_page_range() xen/gntdev: use mmu_interval_notifier_insert mm/hmm: remove hmm_mirror and related drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror drm/amdgpu: Call find_vma under mmap_sem nouveau: use mmu_interval_notifier instead of hmm_mirror nouveau: use mmu_notifier directly for invalidate_range_start drm/radeon: use mmu_interval_notifier_insert RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv RDMA/odp: Use mmu_interval_notifier_insert() mm/hmm: define the pre-processor related parts of hmm.h even if disabled mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror mm/mmu_notifier: add an interval tree notifier mm/mmu_notifier: define the header pre-processor parts even if disabled mm/hmm: allow snapshot of the special zero page
2019-11-27Merge tag 'driver-core-5.5-rc1' of ↵Linus Torvalds2-55/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ...
2019-11-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds16-745/+1156
Pull rdma updates from Jason Gunthorpe: "Again another fairly quiet cycle with few notable core code changes and the usual variety of driver bug fixes and small improvements. - Various driver updates and bug fixes for siw, bnxt_re, hns, qedr, iw_cxgb4, vmw_pvrdma, mlx5 - Improvements in SRPT from working with iWarp - SRIOV VF support for bnxt_re - Skeleton kernel-doc files for drivers/infiniband - User visible counters for events related to ODP - Common code for tracking of mmap lifetimes so that drivers can link HW object liftime to a VMA - ODP bug fixes and rework - RDMA READ support for efa - Removal of the very old cxgb3 driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (168 commits) RDMA/hns: Delete unnecessary callback functions for cq RDMA/hns: Rename the functions used inside creating cq RDMA/hns: Redefine the member of hns_roce_cq struct RDMA/hns: Redefine interfaces used in creating cq RDMA/efa: Expose RDMA read related attributes RDMA/efa: Support remote read access in MR registration RDMA/efa: Store network attributes in device attributes IB/hfi1: remove redundant assignment to variable ret RDMA/bnxt_re: Fix missing le16_to_cpu RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series RDMA/bnxt_re: Fix Kconfig indentation IB/mlx5: Implement callbacks for getting VFs GUID attributes IB/ipoib: Add ndo operation for getting VFs GUID attributes IB/core: Add interfaces to get VF node and port GUIDs net/core: Add support for getting VF GUIDs RDMA/qedr: Fix null-pointer dereference when calling rdma_user_mmap_get_offset RDMA/cm: Use refcount_t type for refcount variable IB/mlx5: Support extended number of strides for Striding RQ IB/mlx4: Update HW GID table while adding vlan GID ...
2019-11-25Merge branch 'ib-guids' into rdma.git for-nextJason Gunthorpe5-22/+51
Danit Goldberg says: ==================== This series extends RTNETLINK to provide IB port and node GUIDs, which were configured for Infiniband VFs. The functionality to set VF GUIDs already existed for a long time, and here we are adding the missing "get" so that netlink will be symmetric and various cloud orchestration tools will be able to manage such VFs more naturally. The iproute2 was extended too to present those GUIDs. - ip link show <device> For example: - ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33 - ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10 - ip link show ib4 ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'ib-guids': (35 commits) IB/mlx5: Implement callbacks for getting VFs GUID attributes IB/ipoib: Add ndo operation for getting VFs GUID attributes IB/core: Add interfaces to get VF node and port GUIDs net/core: Add support for getting VF GUIDs net/mlx5: Add new chain for netfilter flow table offload net/mlx5: Refactor creating fast path prio chains net/mlx5: Accumulate levels for chains prio namespaces net/mlx5: Define fdb tc levels per prio net/mlx5: Rename FDB_* tc related defines to FDB_TC_* defines net/mlx5: Simplify fdb chain and prio eswitch defines IB/mlx5: Load profile according to RoCE enablement state IB/mlx5: Rename profile and init methods net/mlx5: Handle "enable_roce" devlink param net/mlx5: Document flow_steering_mode devlink param devlink: Add new "enable_roce" generic device param net/mlx5: fix spelling mistake "metdata" -> "metadata" net/mlx5: fix kvfree of uninitialized pointer spec IB/mlx5: Introduce and use mlx5_core_is_vf() net/mlx5: E-switch, Enable metadata on own vport net/mlx5: Refactor ingress acl configuration ... Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-23RDMA/odp: Use mmu_interval_notifier_insert()Jason Gunthorpe3-33/+27
Replace the internal interval tree based mmu notifier with the new common mmu_interval_notifier_insert() API. This removes a lot of code and fixes a deadlock that can be triggered in ODP: zap_page_range() mmu_notifier_invalidate_range_start() [..] ib_umem_notifier_invalidate_range_start() down_read(&per_mm->umem_rwsem) unmap_single_vma() [..] __split_huge_page_pmd() mmu_notifier_invalidate_range_start() [..] ib_umem_notifier_invalidate_range_start() down_read(&per_mm->umem_rwsem) // DEADLOCK mmu_notifier_invalidate_range_end() up_read(&per_mm->umem_rwsem) mmu_notifier_invalidate_range_end() up_read(&per_mm->umem_rwsem) The umem_rwsem is held across the range_start/end as the ODP algorithm for invalidate_range_end cannot tolerate changes to the interval tree. However, due to the nested invalidation regions the second down_read() can deadlock if there are competing writers. The new core code provides an alternative scheme to solve this problem. Fixes: ca748c39ea3f ("RDMA/umem: Get rid of per_mm->notifier_count") Link: https://lore.kernel.org/r/20191112202231.3856-6-jgg@ziepe.ca Tested-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-22IB/mlx5: Implement callbacks for getting VFs GUID attributesDanit Goldberg3-0/+28
Implement the IB defined callback mlx5_ib_get_vf_guid used to query FW for VFs attributes and return node and port GUIDs. Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-11-19IB/mlx5: Support extended number of strides for Striding RQMark Zhang3-12/+43
Extends the minimum single WQE strides from 64 to 8, which is exposed by the "min_single_wqe_log_num_of_strides" field of striding_rq_caps. Choose right number of strides based on FW capability. Link: https://lore.kernel.org/r/20191115154555.247856-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-17IB/umem: remove the dmasync argument to ib_umem_getChristoph Hellwig6-8/+8
The argument is always ignored, so remove it. Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-13Merge branch 'mlx5-next' of ↵Saeed Mahameed3-22/+23
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux 1) New generic devlink param "enable_roce", for downstream devlink reload support 2) Do vport ACL configuration on per vport basis when enabling/disabling a vport. This enables to have vports enabled/disabled outside of eswitch config for future 3) Split the code for legacy vs offloads mode and make it clear 4) Tide up vport locking and workqueue usage 5) Fix metadata enablement for ECPF 6) Make explicit use of VF property to publish IB_DEVICE_VIRTUAL_FUNCTION 7) E-Switch and flow steering core low level support and refactoring for netfilter flowtables offload Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13IB/mlx5: Support flow counters offset for bulk countersYevgeny Kliteynik3-4/+42
Add support for flow steering counters action with a non-base counter ID (offset) for bulk counters. When creating a flow counter object, save the bulk value. This value is used when a flow action with a non-base counter ID is requested - to validate that the required offset is in the range of the allocated bulk. Link: https://lore.kernel.org/r/20191103140723.77411-1-leon@kernel.org Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-12RDMA: Change MAD processing function to remove extra casting and parameterLeon Romanovsky2-17/+12
All users of process_mad() converts input pointers from ib_mad_hdr to be ib_mad, update the function declaration to use ib_mad directly. Also remove not used input MAD size parameter. Link: https://lore.kernel.org/r/20191029062745.7932-17-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-By: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-11IB/mlx5: Load profile according to RoCE enablement stateMichael Guralnik1-12/+13
When RoCE is disabled load mlx5_ib in raw_eth profile. Clean pf_profile roce capability checks as it will not be used without roce capability. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-11IB/mlx5: Rename profile and init methodsMichael Guralnik3-9/+9
Rename uplink_rep_profile and its unique init and cleanup stages to suit its upcoming use as the profile when RoCE is disabled. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-06RDMA/mlx5: Rewrite MAD processing logic to be readableLeon Romanovsky1-61/+55
Multiple "if"s and "||" make extension of process_mad() function as a tedious task, rewrite that function to be more readable. Link: https://lore.kernel.org/r/20191029062745.7932-14-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06RDMA/mad: Do not check MAD sizes in roce and ib driversLeon Romanovsky1-4/+0
All callers for process_mad allocate MAD structures with proper sizes, there is no need to recheck it. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06RDMA/mad: Allocate zeroed MAD bufferLeon Romanovsky1-2/+0
Ensure that MAD output buffer is zero-based allocated in all the callers of process_mad and remove the various memset()'s from the drivers. Link: https://lore.kernel.org/r/20191029062745.7932-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06RDMA: Connect between the mmap entry and the umap_priv structureMichal Kalderon1-3/+5
The rdma_user_mmap_io interface created a common interface for drivers to correctly map hw resources and zap them once the ucontext is destroyed enabling the drivers to safely free the hw resources. However, this meant the drivers need to delay freeing the resource to the ucontext destroy phase to ensure they were no longer mapped. The new mechanism for a common way of handling user/driver address mapping enabled notifying the driver if all umap_priv mappings were removed, and enabled freeing the hw resources when they are done with and not delay it until ucontext destroy. Since not all drivers use the mechanism, NULL can be sent to the rdma_user_mmap_io interface to continue working as before. Drivers that use the mmap_xa interface can pass the entry being mapped to the rdma_user_mmap_io function to be linked together. Link: https://lore.kernel.org/r/20191030094417.16866-4-michal.kalderon@marvell.com Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-04IB: mlx5: no need to check return value of debugfs_create functionsGreg Kroah-Hartman2-55/+16
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Leon Romanovsky <leon@kernel.org> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-01IB/mlx5: Introduce and use mlx5_core_is_vf()Parav Pandit1-1/+1
Instead of deciding a given device is virtual function or not based on a device is PF or not, use already defined MLX5_COREDEV_VF by introducing an helper API mlx5_core_is_vf(). This enables to clearly identify PF, VF and non virtual functions. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-31IB/mlx5: Test write combining supportMichael Guralnik4-3/+223
Linux can run in all sorts of physical machines and VMs where write combining may or may not be supported. Currently there is no way to reliably tell if the system supports WC, or not. The driver uses WC to optimize posting work to the HCA, and getting this wrong in either direction can cause a significant performance loss. Add a test in mlx5_ib initialization process to test whether write-combining is supported on the machine. The test will run as part of the enable_driver callback to ensure that the test runs after the device is setup and can create and modify the QP needed, but runs before the device is exposed to the users. The test opens UD QP and posts NOP WQEs, the WQE written to the BlueFlame is different from the WQE in memory, requesting CQE only on the BlueFlame WQE. By checking whether we received a completion on one of these WQEs we can know if BlueFlame succeeded and this write-combining must be supported. Change reporting of BlueFlame support to be dependent on write-combining support instead of the FW's guess as to what the machine can do. Link: https://lore.kernel.org/r/20191027062234.10993-1-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-31RDMA/mlx5: Return proper error valueLeon Romanovsky1-1/+1
Returned value from mlx5_mr_cache_alloc() is checked to be error or real pointer. Return proper error code instead of NULL which is not checked later. Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191029055721.7192-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28Merge branch 'odp_rework' into rdma.git for-nextJason Gunthorpe6-591/+604
Jason Gunthorpe says: ==================== In order to hoist the interval tree code out of the drivers and into the mmu_notifiers it is necessary for the drivers to not use the interval tree for other things. This series replaces the interval tree with an xarray and along the way re-aligns all the locking to use a sensible SRCU model where the 'update' step is done by modifying an xarray. The result is overall much simpler and with less locking in the critical path. Many functions were reworked for clarity and small details like using 'imr' to refer to the implicit MR make the entire code flow here more readable. This also squashes at least two race bugs on its own, and quite possibily more that haven't been identified. ==================== Merge conflicts with the odp statistics patch resolved. * branch 'odp_rework': RDMA/odp: Remove broken debugging call to invalidate_range RDMA/mlx5: Do not race with mlx5_ib_invalidate_range during create and destroy RDMA/mlx5: Do not store implicit children in the odp_mkeys xarray RDMA/mlx5: Rework implicit ODP destroy RDMA/mlx5: Avoid double lookups on the pagefault path RDMA/mlx5: Reduce locking in implicit_mr_get_data() RDMA/mlx5: Use an xarray for the children of an implicit ODP RDMA/mlx5: Split implicit handling from pagefault_mr RDMA/mlx5: Set the HW IOVA of the child MRs to their place in the tree RDMA/mlx5: Lift implicit_mr_alloc() into the two routines that call it RDMA/mlx5: Rework implicit_mr_get_data RDMA/mlx5: Delete struct mlx5_priv->mkey_table RDMA/mlx5: Use a dedicated mkey xarray for ODP RDMA/mlx5: Split sig_err MR data into its own xarray RDMA/mlx5: Use SRCU properly in ODP prefetch Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Do not race with mlx5_ib_invalidate_range during create and destroyJason Gunthorpe3-59/+88
For creation, as soon as the umem_odp is created the notifier can be called, however the underlying MR may not have been setup yet. This would cause problems if mlx5_ib_invalidate_range() runs. There is some confusing/ulocked/racy code that might by trying to solve this, but without locks it isn't going to work right. Instead trivially solve the problem by short-circuiting the invalidation if there are not yet any DMA mapped pages. By definition there is nothing to invalidate in this case. The create code will have the umem fully setup before anything is DMA mapped, and npages is fully locked by the umem_mutex. For destroy, invalidate the entire MR at the HW to stop DMA then DMA unmap the pages before destroying the MR. This drives npages to zero and prevents similar racing with invalidate while the MR is undergoing destruction. Arguably it would be better if the umem was created after the MR and destroyed before, but that would require a big rework of the MR code. Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191009160934.3143-15-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Do not store implicit children in the odp_mkeys xarrayJason Gunthorpe1-30/+6
These mkeys are entirely internal and are never used by the HW for page fault. They should also never be used by userspace for prefetch. Simplify & optimize things by not including them in the xarray. Since the prefetch path can now never see a child mkey there is no need for the second synchronize_srcu() during imr destroy. Link: https://lore.kernel.org/r/20191009160934.3143-14-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Rework implicit ODP destroyJason Gunthorpe4-64/+120
Use SRCU in a sensible way by removing all MRs in the implicit tree from the two xarrays (the update operation), then a synchronize, followed by a normal single threaded teardown. This is only a little unusual from the normal pattern as there can still be some work pending in the unbound wq that may also require a workqueue flush. This is tracked with a single atomic, consolidating the redundant existing atomics and wait queue. For understand-ability the entire ODP implicit create/destroy flow now largely exists in a single pair of functions within odp.c, with a few support functions for tearing down an unused child. Link: https://lore.kernel.org/r/20191009160934.3143-13-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Avoid double lookups on the pagefault pathJason Gunthorpe1-106/+80
Now that the locking is simplified combine pagefault_implicit_mr() with implicit_mr_get_data() so that we sweep over the idx range only once, and do the single xlt update at the end, after the child umems are setup. This avoids double iteration/xa_loads plus the sketchy failure path if the xa_load() fails. Link: https://lore.kernel.org/r/20191009160934.3143-12-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Reduce locking in implicit_mr_get_data()Jason Gunthorpe1-12/+26
Now that the child MRs are stored in an xarray we can rely on the SRCU lock to protect the xa_load and use xa_cmpxchg on the slow allocation path to resolve races with concurrent page fault. This reduces the scope of the critical section of umem_mutex for implicit MRs to only cover mlx5_ib_update_xlt, and avoids taking a lock at all if the child MR is already in the xarray. This makes it consistent with the normal ODP MR critical section for umem_lock, and the locking approach used for destroying an unusued implicit child MR. The MLX5_IB_UPD_XLT_ATOMIC is no longer needed in implicit_get_child_mr() since it is no longer called with any locks. Link: https://lore.kernel.org/r/20191009160934.3143-11-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Use an xarray for the children of an implicit ODPJason Gunthorpe2-133/+67
Currently the child leaves are stored in the shared interval tree and every lookup for a child must be done under the interval tree rwsem. This is further complicated by dropping the rwsem during iteration (ie the odp_lookup(), odp_next() pattern), which requires a very tricky an difficult to understand locking scheme with SRCU. Instead reserve the interval tree for the exclusive use of the mmu notifier related code in umem_odp.c and give each implicit MR a xarray containing all the child MRs. Since the size of each child is 1GB of VA, a 1 level xarray will index 64G of VA, and a 2 level will index 2TB, making xarray a much better data structure choice than an interval tree. The locking properties of xarray will be used in the next patches to rework the implicit ODP locking scheme into something simpler. At this point, the xarray is locked by the implicit MR's umem_mutex, and read can also be locked by the odp_srcu. Link: https://lore.kernel.org/r/20191009160934.3143-10-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Split implicit handling from pagefault_mrJason Gunthorpe1-49/+76
The single routine has a very confusing scheme to advance to the next child MR when working on an implicit parent. This scheme can only be used when working with an implicit parent and must not be triggered when working on a normal MR. Re-arrange things by directly putting all the single-MR stuff into one function and calling it in a loop for the implicit case. Simplify some of the error handling in the new pagefault_real_mr() to remove unneeded gotos. Link: https://lore.kernel.org/r/20191009160934.3143-9-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Set the HW IOVA of the child MRs to their place in the treeJason Gunthorpe1-2/+3
Instead of rewriting all the IOVA's to 0 as things progress down the tree make the IOVA of the children equal to placement in the tree. This makes things easier to understand by keeping mmkey.iova == HW configuration. Link: https://lore.kernel.org/r/20191009160934.3143-8-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Lift implicit_mr_alloc() into the two routines that call itJason Gunthorpe1-77/+74
This makes the routines easier to understand, particularly with respect the locking requirements of the entire sequence. The implicit_mr_alloc() had a lot of ifs specializing it to each of the callers, and only a very small amount of code was actually shared. Following patches will cause the flow in the two functions to diverge further. Link: https://lore.kernel.org/r/20191009160934.3143-7-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Rework implicit_mr_get_dataJason Gunthorpe1-54/+69
This function is intended to loop across each MTT chunk in the implicit parent that intersects the range [io_virt, io_virt+bnct). But it is has a confusing construction, so: - Consistently use imr and odp_imr to refer to the implicit parent to avoid confusion with the normal mr and odp of the child - Directly compute the inclusive start/end indexes by shifting. This is clearer to understand the intent and avoids any errors from unaligned values of addr - Iterate directly over the range of MTT indexes, do not make a loop out of goto - Follow 'success oriented flow', with goto error unwind - Directly calculate the range of idx's that need update_xlt - Ensure that any leaf MR added to the interval tree always results in an update to the XLT Link: https://lore.kernel.org/r/20191009160934.3143-6-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Delete struct mlx5_priv->mkey_tableJason Gunthorpe1-9/+0
No users are left, delete it. Link: https://lore.kernel.org/r/20191009160934.3143-5-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Use a dedicated mkey xarray for ODPJason Gunthorpe5-73/+83
There is a per device xarray storing mkeys that is used to store every mkey in the system. However, this xarray is now only read by ODP for certain ODP designated MRs (ODP, implicit ODP, MW, DEVX_INDIRECT). Create an xarray only for use by ODP, that only contains ODP related MKeys. This xarray is protected by SRCU and all erases are protected by a synchronize. This improves performance: - All MRs in the odp_mkeys xarray are ODP MRs, so some tests for is_odp() can be deleted. The xarray will also consume fewer nodes. - normal MR's are never mixed with ODP MRs in a SRCU data structure so performance sucking synchronize_srcu() on every MR destruction is not needed. - No smp_load_acquire(live) and xa_load() double barrier on read Due to the SRCU locking scheme care must be taken with the placement of the xa_store(). Once it completes the MR is immediately visible to other threads and only through a xa_erase() & synchronize_srcu() cycle could it be destroyed. Link: https://lore.kernel.org/r/20191009160934.3143-4-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Split sig_err MR data into its own xarrayJason Gunthorpe4-17/+28
The locking model for signature is completely different than ODP, do not share the same xarray that relies on SRCU locking to support ODP. Simply store the active mlx5_core_sig_ctx's in an xarray when signature MRs are created and rely on trivial xarray locking to serialize everything. The overhead of storing only a handful of SIG related MRs is going to be much less than an xarray full of every mkey. Link: https://lore.kernel.org/r/20191009160934.3143-3-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Use SRCU properly in ODP prefetchJason Gunthorpe1-141/+121
When working with SRCU protected xarrays the xarray itself should be the SRCU 'update' point. Instead prefetch is using live as the SRCU update point and this prevents switching the locking design to use the xarray instead. To solve this the prefetch must only read from the xarray once, and hold on to the actual MR pointer for the duration of the async operation. Incrementing num_pending_prefetch delays destruction of the MR, so it is suitable. Prefetch calls directly to the pagefault_mr using the MR pointer and only does a single xarray lookup. All the testing if a MR is prefetchable or not is now done only in the prefetch code and removed from the pagefault critical path. Link: https://lore.kernel.org/r/20191009160934.3143-2-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28Merge tag 'v5.4-rc5' into rdma.git for-nextJason Gunthorpe4-96/+91
Linux 5.4-rc5 For dependencies in the next patches Conflict resolved by keeping the delete of the unlock. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/mlx5: Use irq xarray locking for mkey_tableJason Gunthorpe1-2/+2
The mkey_table xarray is touched by the reg_mr_callback() function which is called from a hard irq. Thus all other uses of xa_lock must use the _irq variants. WARNING: inconsistent lock state 5.4.0-rc1 #12 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. python3/343 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888182be1d40 (&(&xa->xa_lock)->rlock#3){?.-.}, at: xa_erase+0x12/0x30 {IN-HARDIRQ-W} state was registered at: lock_acquire+0xe1/0x200 _raw_spin_lock_irqsave+0x35/0x50 reg_mr_callback+0x2dd/0x450 [mlx5_ib] mlx5_cmd_exec_cb_handler+0x2c/0x70 [mlx5_core] mlx5_cmd_comp_handler+0x355/0x840 [mlx5_core] [..] Possible unsafe locking scenario: CPU0 ---- lock(&(&xa->xa_lock)->rlock#3); <Interrupt> lock(&(&xa->xa_lock)->rlock#3); *** DEADLOCK *** 2 locks held by python3/343: #0: ffff88818eb4bd38 (&uverbs_dev->disassociate_srcu){....}, at: ib_uverbs_ioctl+0xe5/0x1e0 [ib_uverbs] #1: ffff888176c76d38 (&file->hw_destroy_rwsem){++++}, at: uobj_destroy+0x2d/0x90 [ib_uverbs] stack backtrace: CPU: 3 PID: 343 Comm: python3 Not tainted 5.4.0-rc1 #12 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x86/0xca print_usage_bug.cold.50+0x2e5/0x355 mark_lock+0x871/0xb50 ? match_held_lock+0x20/0x250 ? check_usage_forwards+0x240/0x240 __lock_acquire+0x7de/0x23a0 ? __kasan_check_read+0x11/0x20 ? mark_lock+0xae/0xb50 ? mark_held_locks+0xb0/0xb0 ? find_held_lock+0xca/0xf0 lock_acquire+0xe1/0x200 ? xa_erase+0x12/0x30 _raw_spin_lock+0x2a/0x40 ? xa_erase+0x12/0x30 xa_erase+0x12/0x30 mlx5_ib_dealloc_mw+0x55/0xa0 [mlx5_ib] uverbs_dealloc_mw+0x3c/0x70 [ib_uverbs] uverbs_free_mw+0x1a/0x20 [ib_uverbs] destroy_hw_idr_uobject+0x49/0xa0 [ib_uverbs] [..] Fixes: 0417791536ae ("RDMA/mlx5: Add missing synchronize_srcu() for MW cases") Link: https://lore.kernel.org/r/20191024234910.GA9038@ziepe.ca Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/mlx5: Align usage of QP1 create flags with rest of mlx5 definesMichael Guralnik3-11/+6
There is little value in keeping separate function for one flag, provide it directly like any other mlx5 define. Link: https://lore.kernel.org/r/20191020064400.8344-2-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/mlx5: Remove dead codeRan Rozenstein2-16/+0
mlx5_ib_dc_atomic_is_supported function is not used anywhere. Remove the dead code. Fixes: a60109dc9a95 ("IB/mlx5: Add support for extended atomic operations") Link: https://lore.kernel.org/r/20191020064454.8551-1-leon@kernel.org Signed-off-by: Ran Rozenstein <ranro@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/nldev: Provide MR statisticsErez Alfasi3-0/+46
Add RDMA nldev netlink interface for dumping MR statistics information. Output example: $ ./ibv_rc_pingpong -o -P -s 500000000 local address: LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID :: $ rdma stat show mr dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0 Link: https://lore.kernel.org/r/20191016062308.11886-5-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/mlx5: Return ODP type per MRErez Alfasi5-1/+55
Provide an ODP explicit/implicit type as part of 'rdma -dd resource show mr' dump. For example: $ rdma -dd resource show mr dev mlx5_0 mrn 1 rkey 0xa99a lkey 0xa99a mrlen 50000000 pdn 9 pid 7372 comm ibv_rc_pingpong drv_odp explicit For non-ODP MRs, we won't print "drv_odp ..." at all. Link: https://lore.kernel.org/r/20191016062308.11886-4-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/mlx5: Introduce ODP diagnostic countersErez Alfasi2-0/+19
Introduce ODP diagnostic counters and count the following per MR within IB/mlx5 driver: 1) Page faults: Total number of faulted pages. 2) Page invalidations: Total number of pages invalidated by the OS during all invalidation events. The translations can be no longer valid due to either non-present pages or mapping changes. Link: https://lore.kernel.org/r/20191016062308.11886-2-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22Merge branch 'mlx5-rd-sgl' into rdma.git for-nextJason Gunthorpe1-0/+2
From Yamin Friedman: ==================== This series from Yamin implements long standing "TODO" existed in rw.c. It allows the driver to specify a cut-over point where it is faster to build a lkey MR rather than do a large SGL for RDMA READ operations. mlx5 HW gets a notable performane boost by switching to MRs. ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'mlx5-rd-sgl': (3 commits) RDMA/mlx5: Add capability for max sge to get optimized performance RDMA/rw: Support threshold for registration vs scattering to local pages net/mlx5: Expose optimal performance scatter entries capability
2019-10-22RDMA/mlx5: Add capability for max sge to get optimized performanceYamin Friedman1-0/+2
Allows the IB device to provide a value of maximum scatter gather entries per RDMA READ. In certain cases it may be preferable for a device to perform UMR memory registration rather than have many scatter entries in a single RDMA READ. This provides a significant performance increase in devices capable of using different memory registration schemes based on the number of scatter gather entries. This general capability allows each device vendor to fine tune when it is better to use memory registration. Link: https://lore.kernel.org/r/20191007135933.12483-4-leon@kernel.org Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-17RDMA/mlx5: Clear old rate limit when closing QPRafi Wiener1-3/+5
Before QP is closed it changes to ERROR state, when this happens the QP was left with old rate limit that was already removed from the table. Fixes: 7d29f349a4b9 ("IB/mlx5: Properly adjust rate limit on QP state transitions") Signed-off-by: Rafi Wiener <rafiw@mellanox.com> Signed-off-by: Oleg Kuporosov <olegk@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191002120243.16971-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-10-08IB/mlx5: Introduce and use mkey context setting helper routineParav Pandit1-18/+16
Introduce and use set_mkc_access_pd_addr_fields() which sets mkey context's access rights, PD, address fields. Thereby avoid the code duplication. Link: https://lore.kernel.org/r/20191006155443.31068-1-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Add missing synchronize_srcu() for MW casesJason Gunthorpe3-48/+32
While MR uses live as the SRCU 'update', the MW case uses the xarray directly, xa_erase() causes the MW to become inaccessible to the pagefault thread. Thus whenever a MW is removed from the xarray we must synchronize_srcu() before freeing it. This must be done before freeing the mkey as re-use of the mkey while the pagefault thread is using the stale mkey is undesirable. Add the missing synchronizes to MW and DEVX indirect mkey and delete the bogus protection against double destroy in mlx5_core_destroy_mkey() Fixes: 534fd7aac56a ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Put live in the correct place for ODP MRsJason Gunthorpe3-38/+14
live is used to signal to the pagefault thread that the MR is initialized and ready for use. It should be after the umem is assigned and all other setup is completed. This prevents races (at least) of the form: CPU0 CPU1 mlx5_ib_alloc_implicit_mr() implicit_mr_alloc() live = 1 imr->umem = umem num_pending_prefetch_inc() if (live) atomic_inc(num_pending_prefetch) atomic_set(num_pending_prefetch,0) // Overwrites other thread's store Further, live is being used with SRCU as the 'update' in an acquire/release fashion, so it can not be read and written raw. Move all live = 1's to after MR initialization is completed and use smp_store_release/smp_load_acquire() for manipulating it. Add a missing live = 0 when an implicit MR child is deleted, before queuing work to do synchronize_srcu(). The barriers in update_odp_mr() were some broken attempt to create a acquire/release, but were not even applied consistently and missed the point, delete it as well. Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcuJason Gunthorpe1-2/+3
During destroy setting live = 0 and then synchronize_srcu() prevents num_pending_prefetch from incrementing, and also, ensures that all work holding that count is queued on the WQ. Testing before causes races of the form: CPU0 CPU1 dereg_mr() mlx5_ib_advise_mr_prefetch() srcu_read_lock() num_pending_prefetch_inc() if (!live) live = 0 atomic_read() == 0 // skip flush_workqueue() atomic_inc() queue_work(); srcu_read_unlock() WARN_ON(atomic_read()) // Fails Swap the order so that the synchronize_srcu() prevents this. Fixes: a6bc3875f176 ("IB/mlx5: Protect against prefetch of invalid MR") Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 07:38:58 +0000