summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx5
AgeCommit message (Collapse)AuthorFilesLines
2016-12-15Merge tag 'for-linus' of ↵Linus Torvalds8-144/+410
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is the complete update for the rdma stack for this release cycle. Most of it is typical driver and core updates, but there is the entirely new VMWare pvrdma driver. You may have noticed that there were changes in DaveM's pull request to the bnxt Ethernet driver to support a RoCE RDMA driver. The bnxt_re driver was tentatively set to be pulled in this release cycle, but it simply wasn't ready in time and was dropped (a few review comments still to address, and some multi-arch build issues like prefetch() not working across all arches). Summary: - shared mlx5 updates with net stack (will drop out on merge if Dave's tree has already been merged) - driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe - debug cleanups - new connection rejection helpers - SRP updates - various misc fixes - new paravirt driver from vmware" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits) IB: Add vmw_pvrdma driver IB/mlx4: fix improper return value IB/ocrdma: fix bad initialization infiniband: nes: return value of skb_linearize should be handled MAINTAINERS: Update Intel RDMA RNIC driver maintainers MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers IB/core: fix unmap_sg argument qede: fix general protection fault may occur on probe IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc mlx5, calc_sq_size(): Make a debug message more informative mlx5: Remove a set-but-not-used variable mlx5: Use { } instead of { 0 } to init struct IB/srp: Make writing the add_target sysfs attr interruptible IB/srp: Make mapping failures easier to debug IB/srp: Make login failures easier to debug IB/srp: Introduce a local variable in srp_add_one() IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build IB/multicast: Check ib_find_pkey() return value IPoIB: Avoid reading an uninitialized member variable IB/mad: Fix an array index check ...
2016-12-14Merge branch 'mlx' into merge-testDoug Ledford8-142/+410
2016-12-14mlx5, calc_sq_size(): Make a debug message more informativeBart Van Assche1-1/+2
Make it clear that qp->sq.wqe_cnt is not the number of WQEs. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14mlx5: Remove a set-but-not-used variableBart Van Assche1-7/+0
This has been detected by building the mlx5 driver with W=1. Fixes: 1a412fb1caa2 ('net/mlx5: Fixes: 1a412fb1caa2 (IB/mlx5: Modify QP commands via mlx5 ifc') Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14mlx5: Use { } instead of { 0 } to init structBart Van Assche1-1/+1
Detected by sparse. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/mlx5: avoid bogus -Wmaybe-uninitialized warningArnd Bergmann1-18/+21
We get a false-positive warning in linux-next for the mlx5 driver: infiniband/hw/mlx5/mr.c: In function ‘mlx5_ib_reg_user_mr’: infiniband/hw/mlx5/mr.c:1172:5: error: ‘order’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1161:6: note: ‘order’ was declared here infiniband/hw/mlx5/mr.c:1173:6: error: ‘ncont’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1160:6: note: ‘ncont’ was declared here infiniband/hw/mlx5/mr.c:1173:6: error: ‘page_shift’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1158:6: note: ‘page_shift’ was declared here infiniband/hw/mlx5/mr.c:1143:13: error: ‘npages’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1159:6: note: ‘npages’ was declared here I had a trivial workaround for gcc-5 or higher, but that didn't work on gcc-4.9 unfortunately. The only way I found to avoid the warnings for gcc-4.9, short of initializing each of the arguments first was to change the calling conventions to separate the error code from the umem pointer. This avoids casting the error codes from one pointer to another incompatible pointer, and lets gcc figure out when that the data is actually valid whenever we return successfully. Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Properly adjust rate limit on QP state transitionsBodong Wang3-9/+69
- Add MODIFY_QP_EX CMD to extend modify_qp. - Rate limit will be updated in the following state transactions: RTR2RTS, RTS2RTS. The limit will be removed when SQ is in RST and ERR state. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Report mlx5 packet pacing capabilities when querying deviceBodong Wang1-0/+13
Enable mlx5 based hardware to report packet pacing capabilities from kernel to user space. Packet pacing allows to limit the rate to any number between the maximum and minimum, based on user settings. The capabilities are exposed to user space through query_device by uhw. The following capabilities are reported: 1. The maximum and minimum rate limit in kbps supported by packet pacing. 2. Bitmap showing which QP types are supported by packet pacing operation. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Support RAW Ethernet when RoCE is disabledOr Gerlitz1-9/+13
On some environments, such as certain SRIOV VF configurations, RoCE is not supported for mlx5 Ethernet ports. Currently, the driver will not open IB device on that port. This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET QPs) functionality to remain in place. For that end, enhance the relevant driver flows such that we do create a device instance in that case. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Rename RoCE related helpers to reflect being Eth onesOr Gerlitz1-11/+11
This is a pre-step towards having mlx5 IB device also over Eth ports where RoCE is not supported. We change the roce enable/disable and roce_lag init/fini function names to have _eth instead of _roce. This patch doesn't change any functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Refactor registration to netdev notifierOr Gerlitz1-9/+20
Refactor the netdev notifier registration into a small helper function. This is a pre-step towards having mlx5 IB device over an Ethernet port which doesn't support RoCE. Also, renamed the de-registration helper and the new helper as netdev notifier and not roce, to make it clear this is not only used with roce. This patch doesn't change any functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Use u64 for UMR lengthMaor Gottlieb1-1/+1
The fast_registration length is used to convey length for memory registrations through UMR which can be of any size up to 2^64. Change the length type to be u64. Fixes: 968e78dd9644 ('IB/mlx5: Enhance UMR support to allow partial page table update') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Avoid system crash when enabling many VFsEli Cohen1-1/+2
When enabling many VFs, the total amount of DMA mappings increase significantly. This causes DMA allocations to take a lot of time since they are serialized in the kernel. As a result the driver enters into fatal condition due to timeout and the system hangs. To recover from this we disable MR cache for VFs. PFs will still have a full cache and VFs cache can be manipulated as usual after driver load. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Assign SRQ type earlierMaor Gottlieb1-1/+1
Move the SRQ type assignment to be before actually using it in create_srq_user() and in create_srq_kernel() functions. Fixes: af1ba291c5e4 ('{net, IB}/mlx5: Refactor internal SRQ API') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Make create/destroy_ah available to userspaceMoni Shoua1-0/+2
Advertise that create_ah and destroy_ah verbs are accessible from uverbs interface. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Use kernel driver to help userspace create ahMoni Shoua1-0/+21
Resolving a MAC address for a given IP address in userspace is inefficient. This patch lets mlx5 user driver using the kernel driver to resolve the mac and get the answer in the private section of the response. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/core: Let create_ah return extended response to userMoni Shoua2-2/+5
Add struct ib_udata to the signature of create_ah callback that is implemented by IB device drivers. This allows HW drivers to return extra data to the userspace library. This patch prepares the ground for mlx5 driver to resolve destination mac address for a given GID and return it to userspace. This patch was previously submitted by Knut Omang as a part of the patch set to support Oracle's Infiniband HCA (SIF). Signed-off-by: Knut Omang <knut.omang@oracle.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Report that device has udata response in create_ahMoni Shoua1-1/+2
To make mlx5 user driver aware of whether kernel driver returns dmac in user data response add a new flag that will be returned back to user-space through alloc_ucontext. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Add support to match inner packet fieldsMoses Reuben1-53/+78
Add support to match packet fields which are tunneled, i.e. support matching the header of the inner packet which is the result of or bit operation of the original header and the IB_FLOW_SPEC_INNER type. The combination of IB_FLOW_SPEC_INNER | IB_FLOW_SPEC_VXLAN_TUNNEL is not needed to be checked, because the IB core has this check already. Signed-off-by: Moses Reuben <mosesr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Support Vxlan tunneling specificationMoses Reuben1-0/+11
Add support to receive specific Vxlan packet in ConnectX-4. Signed-off-by: Moses Reuben <mosesr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Add support for CQE compressingBodong Wang1-1/+29
CQE compressing reduces PCI overhead by coalescing and compressing multiple CQEs into a single merged CQE. Successful compressing improves message rate especially for small packet traffic. CQE compressing is supported for all 64B CQE formats (with certain limitations) generated by RQ/Responder or by SQ/Requestor. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Report mlx5 CQE compression caps during queryBodong Wang1-0/+10
The capabilities include: - Max number of compressed and aggregated CQEs in a single session, while zero means unsupported. - For Responder, there are two formats of mini CQE: mini CQE with Rx hash and mini CQE with checksum. They're mutual exclusive. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13IB/mlx5: Report mlx5 multi packet WQE caps during queryBodong Wang1-0/+11
The capabilities whether hardware support multi packet WQE or not is exposed to user space through query_device by uhw. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-03IB/mlx5: Remove debug prints after allocation failureLeon Romanovsky1-2/+0
The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller5-9/+25
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17Merge tag 'for-linus' of ↵Linus Torvalds5-9/+25
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rmda fixes from Doug Ledford. "First round of -rc fixes. Due to various issues, I've been away and couldn't send a pull request for about three weeks. There were a number of -rc patches that built up in the meantime (some where there already from the early -rc stages). Obviously, there were way too many to send now, so I tried to pare the list down to the more important patches for the -rc cycle. Most of the code has had plenty of soak time at the various vendor's testing setups, so I doubt there will be another -rc pull request this cycle. I also tried to limit the patches to those with smaller footprints, so even though a shortlog is longer than I would like, the actual diffstat is mostly very small with the exception of just three files that had more changes, and a couple files with pure removals. Summary: - Misc Intel hfi1 fixes - Misc Mellanox mlx4, mlx5, and rxe fixes - A couple cxgb4 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits) iw_cxgb4: invalidate the mr when posting a read_w_inv wr iw_cxgb4: set *bad_wr for post_send/post_recv errors IB/rxe: Update qp state for user query IB/rxe: Clear queue buffer when modifying QP to reset IB/rxe: Fix handling of erroneous WR IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksum IB/mlx4: Fix create CQ error flow IB/mlx4: Check gid_index return value IB/mlx5: Fix NULL pointer dereference on debug print IB/mlx5: Fix fatal error dispatching IB/mlx5: Resolve soft lock on massive reg MRs IB/mlx5: Use cache line size to select CQE stride IB/mlx5: Validate requested RQT size IB/mlx5: Fix memory leak in query device IB/core: Avoid unsigned int overflow in sg_alloc_table IB/core: Add missing check for addr_resolve callback return value IB/core: Set routable RoCE gid type for ipv4/ipv6 networks IB/cm: Mark stale CM id's whenever the mad agent was unregistered IB/uverbs: Fix leak of XRC target QPs IB/hfi1: Remove incorrect IS_ERR check ...
2016-11-16IB/mlx5: Limit mkey page size to 2GBMajd Dibbiny6-8/+18
The maximum page size in the mkey context is 2GB. Until today, we didn't enforce this requirement in the code, and therefore, if we got a page size larger than 2GB, we have passed zeros in the log_page_shift instead of the actual value and the registration failed. This patch limits the driver to use compound pages of 2GB for mkeys. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix reported max SGE calculationEli Cohen2-4/+33
Add the 512 bytes limit of RDMA READ and the size of remote address to the max SGE calculation. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Wait for all async command completions to completeEli Cohen1-0/+28
Wait before continuing unload till all pending mkey async creation requests are done. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Put non zero value in max_ahMaor Gottlieb1-0/+1
We put INT_MAX since this is the max value that can be held. Though there is no hardware limitation, this is practically a large enough number so we can use it. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix atomic cap in indirect UMRMaor Gottlieb1-5/+7
Remove from the driver the limitation imposed by firmware check to not allow change of atomic permissions for indirect UMRs. In order to avoid failures on old firmware, we only ask for change of atomic permissions if atomic operations are supported. Fixes: 968e78dd9644 ('IB/mlx5: Enhance UMR support to allow partial page table update') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Replace numerical constant with predefined MACROMax Gurtovoy1-1/+1
Replace the pre-defined macro signifying inline umr instead of the numerical constant. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix NULL pointer dereference on debug printEli Cohen1-2/+2
For XRC QP CQs may not exist. Check before attempting dereference. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix fatal error dispatchingEli Cohen1-2/+5
When an internal error condition is detected, make sure to set the device inactive after dispatching the event so ULPs can get a notification of this event. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Resolve soft lock on massive reg MRsMoshe Lazer2-1/+7
When calling reg_mr of large MRs (e.g. 4GB) from multiple processes and MR caches can't supply the required amount of MRs the slow-path of MR allocation may be used. In this case we need to serialize the slow-path between the processes to avoid soft lock. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Use cache line size to select CQE strideDaniel Jurgens1-2/+1
When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Validate requested RQT sizeMaor Gottlieb1-0/+8
Validate that the requested size of RQT is supported by firmware. Fixes: c5f9092936fe ('IB/mlx5: Add Receive Work Queue Indirection table operations') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix memory leak in query deviceMajd Dibbiny1-2/+2
We need to free dev->port when we fail to enable RoCE or initialize node data. Fixes: 0837e86a7a34 ('IB/mlx5: Add per port counters') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-09net/mlx5: Support encap id when setting new steering entryHadar Hen Zion1-5/+5
In order to support steering rules which add encapsulation headers, encap_id parameter is needed. Add new mlx5_flow_act struct which holds action related parameter: action, flow_tag and encap_id. Use mlx5_flow_act struct when adding a new steering rule. This patch doesn't change any functionality. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net/mlx5: Add creation flags when adding new flow tableHadar Hen Zion1-1/+1
When creating flow tables, allow the caller to specify creation flags. Currently no flags are used and as such this patch doesn't add any new functionality. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge tag 'shared-for-4.10-1' of ↵David S. Miller2-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma Saeed Mahameed says: ==================== Mellanox mlx5 core driver updates 2016-10-25 This series contains some updates and fixes of mlx5 core and IB drivers with the addition of two features that demand new low level commands and infrastructure updates. - SRIOV VF max rate limit support - mlx5e tc support for FWD rules with counter. Needed for both net and rdma subsystems. Updates and Fixes: From Saeed Mahameed (2): - mlx5 IB: Skip handling unknown mlx5 events - Add ConnectX-5 PCIe 4.0 VF device ID From Artemy Kovalyov (2): - Update struct mlx5_ifc_xrqc_bits - Ensure SRQ physical address structure endianness From Eugenia Emantayev (1): - Fix length of async_event_mask New Features: From Mohamad Haj Yahia (3): mlx5 SRIOV VF max rate limit support - Introduce TSAR manipulation firmware commands - Introduce E-switch QoS management - Add SRIOV VF max rate configuration support From Mark Bloch (7): mlx5e Tc support for FWD rule with counter - Don't unlock fte while still using it - Use fte status to decide on firmware command - Refactor find_flow_rule - Group similar rules under the same fte - Add multi dest support - Add option to add fwd rule with counter - mlx5e tc support for FWD rule with counter Mark here fixed two trivial issues with the flow steering core, and did some refactoring in the flow steering API to support adding mulit destination rules to the same hardware flow table entry at once. In the last two patches added the ability to populate a flow rule with a flow counter to the same flow entry. V2: Dropped some patches that added new structures without adding any usage of them. Added SRIOV VF max rate configuration support patch that introduces the usage of the TSAR infrastructure. Added flow steering fixes and refactoring in addition to mlx5 tc support for forward rule with counter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30net/mlx5: Add multi dest supportMark Bloch2-8/+8
Currently when calling mlx5_add_flow_rule we accept only one flow destination, this commit allows to pass multiple destinations. This change forces us to change the return structure to a more flexible one. We introduce a flow handle (struct mlx5_flow_handle), it holds internally the number for rules created and holds an array where each cell points the to a flow rule. From the consumers (of mlx5_add_flow_rule) point of view this change is only cosmetic and requires only to change the type of the returned value they store. From the core point of view, we now need to use a loop when allocating and deleting rules (e.g given to us a flow handler). Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30IB/mlx5: Skip handling unknown eventsSaeed Mahameed1-0/+2
Do not dispatch unknown mlx5 core events on mlx5_ib_event. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-29{net, ib}/mlx5: Make cache line size determination at runtime.Daniel Jurgens2-2/+1
ARM 64B cache line systems have L1_CACHE_BYTES set to 128. cache_line_size() will return the correct size. Fixes: cf50b5efa2fe('net/mlx5_core/ib: New device capabilities handling.') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-09Merge tag 'for-linus' of ↵Linus Torvalds9-364/+527
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull main rdma updates from Doug Ledford: "This is the main pull request for the rdma stack this release. The code has been through 0day and I had it tagged for linux-next testing for a couple days. Summary: - updates to mlx5 - updates to mlx4 (two conflicts, both minor and easily resolved) - updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper resolution is to keep the code in cxgb4_main.c as it is in Linus' tree as attach_uld was refactored and moved into cxgb4_uld.c) - improvements to uAPI (moved vendor specific API elements to uAPI area) - add hns-roce driver and hns and hns-roce ACPI reset support - conversion of all rdma code away from deprecated create_singlethread_workqueue - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in staging)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits) staging/lustre: Disable InfiniBand support iw_cxgb4: add fast-path for small REG_MR operations cxgb4: advertise support for FR_NSMR_TPTE_WR IB/core: correctly handle rdma_rw_init_mrs() failure IB/srp: Fix infinite loop when FMR sg[0].offset != 0 IB/srp: Remove an unused argument IB/core: Improve ib_map_mr_sg() documentation IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets IB/mthca: Move user vendor structures IB/nes: Move user vendor structures IB/ocrdma: Move user vendor structures IB/mlx4: Move user vendor structures IB/cxgb4: Move user vendor structures IB/cxgb3: Move user vendor structures IB/mlx5: Move and decouple user vendor structures IB/{core,hw}: Add constant for node_desc ipoib: Make ipoib_warn ratelimited IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue IB/ipoib: Remove deprecated create_singlethread_workqueue ...
2016-10-07IB/mlx5: Move and decouple user vendor structuresLeon Romanovsky7-293/+37
This patch decouples and moves vendors specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libmlx5) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-07IB/{core,hw}: Add constant for node_descYuval Shaia2-4/+4
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-07IB/mlx5/odp: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-2/+2
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "mlx5_ib_page_fault_wq" queues work item &qp_pfault->work. It has been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-07IB/mlx5: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-1/+1
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "cache->wq" queues work items &ent->work (maps to cache_work_func) and &ent->dwork(maps to delayed_cache_work_func). It has been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-07IB/mlx5: LAG QP load balancingAviv Heller2-5/+59
When LAG is active, QP tx affinity (the physical port to which a QP is affined, or the TIS in case of raw-eth) is set in a round robin fashion during state transition from RESET to INIT. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-01 16:41:19 +0000