summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx4/qp.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-12IB/mlx4: Test return value of calls to ib_get_cached_pkeyJack Morgenstein1-3/+11
In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey() without checking its return value. If ib_get_cached_pkey() returns an error code, these functions should return failure. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Fixes: e622f2f4ad21 ("IB: split struct ib_send_wr") Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-04RDMA/providers: Fix return value when QP type isn't supportedKamal Heib1-1/+1
The proper return code is "-EOPNOTSUPP" when the requested QP type is not supported by the provider. Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-21Merge tag 'rds-odp-for-5.5' into rdma.git for-nextJason Gunthorpe1-2/+3
From https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma Leon Romanovsky says: ==================== Use ODP MRs for kernel ULPs The following series extends MR creation routines to allow creation of user MRs through kernel ULPs as a proxy. The immediate use case is to allow RDS to work over FS-DAX, which requires ODP (on-demand-paging) MRs to be created and such MRs were not possible to create prior this series. The first part of this patchset extends RDMA to have special verb ib_reg_user_mr(). The common use case that uses this function is a userspace application that allocates memory for HCA access but the responsibility to register the memory at the HCA is on an kernel ULP. This ULP acts as an agent for the userspace application. The second part provides advise MR functionality for ULPs. This is integral part of ODP flows and used to trigger pagefaults in advance to prepare memory before running working set. The third part is actual user of those in-kernel APIs. ==================== * tag 'rds-odp-for-5.5': net/rds: Use prefetch for On-Demand-Paging MR net/rds: Handle ODP mr registration/unregistration net/rds: Detect need of On-Demand-Paging memory registration RDMA/mlx5: Fix handling of IOVA != user_va in ODP paths IB/mlx5: Mask out unsupported ODP capabilities for kernel QPs RDMA/mlx5: Don't fake udata for kernel path IB/mlx5: Add ODP WQE handlers for kernel QPs IB/core: Add interface to advise_mr for kernel users IB/core: Introduce ib_reg_user_mr IB: Allow calls to ib_umem_get from kernel ULPs Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-16IB: Allow calls to ib_umem_get from kernel ULPsMoni Shoua1-2/+3
So far the assumption was that ib_umem_get() and ib_umem_odp_get() are called from flows that start in UVERBS and therefore has a user context. This assumption restricts flows that are initiated by ULPs and need the service that ib_umem_get() provides. This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device directly by relying on the fact that both UVERBS and ULPs sets that field correctly. Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-01-03RDMA/mlx4: use true,false for bool variablezhengbin1-2/+2
Fixes coccicheck warning: drivers/infiniband/hw/mlx4/qp.c:852:2-14: WARNING: Assignment of 0/1 to bool variable drivers/infiniband/hw/mlx4/qp.c:3087:3-10: WARNING: Assignment of 0/1 to bool variable Link: https://lore.kernel.org/r/1577176812-2238-5-git-send-email-zhengbin13@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-17IB/umem: remove the dmasync argument to ib_umem_getChristoph Hellwig1-3/+2
The argument is always ignored, so remove it. Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25RDMA/mlx4: Annotate boolean arguments as bool and not intLeon Romanovsky1-4/+4
Information provided by qp_has_rq() and used latter is boolean, so update callers to proper type. Link: https://lore.kernel.org/r/20190704130936.8705-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25RDMA/mlx4: Separate creation of RWQ and QPLeon Romanovsky1-82/+154
The mlx4 WQ is implemented with HW QP without special HW object. Current implementation which tried to reuse the code did it with common QP creation flows. Such decision caused to the absence of mlx4_ib_wq struct, which is needed to ensure proper allocation of ib_wq inside of IB/core. Separate create_qp_common() to pure QP flow and to create_rq() for RWQ. Link: https://lore.kernel.org/r/20190704130936.8705-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-20RDMA: Check umem pointer validity prior to releaseLeon Romanovsky1-4/+3
Update ib_umem_release() to behave similarly to kfree() and allow submitting NULL pointer as safe input to this function. Fixes: a52c8e2469c3 ("RDMA: Clean destroy CQ in drivers do not return errors") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-20RDMA: Convert destroy_wq to be voidLeon Romanovsky1-3/+1
All callers of destroy WQ are always success and there is no need to check their return value, so convert destroy_wq to be void. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-05-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-20/+30
Pull rdma updates from Jason Gunthorpe: "This has been a smaller cycle than normal. One new driver was accepted, which is unusual, and at least one more driver remains in review on the list. Summary: - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4, vmw_pvrdma - Many patches from MatthewW converting radix tree and IDR users to use xarray - Introduction of tracepoints to the MAD layer - Build large SGLs at the start for DMA mapping and get the driver to split them - Generally clean SGL handling code throughout the subsystem - Support for restricting RDMA devices to net namespaces for containers - Progress to remove object allocation boilerplate code from drivers - Change in how the mlx5 driver shows representor ports linked to VFs - mlx5 uapi feature to access the on chip SW ICM memory - Add a new driver for 'EFA'. This is HW that supports user space packet processing through QPs in Amazon's cloud" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits) RDMA/ipoib: Allow user space differentiate between valid dev_port IB/core, ipoib: Do not overreact to SM LID change event RDMA/device: Don't fire uevent before device is fully initialized lib/scatterlist: Remove leftover from sg_page_iter comment RDMA/efa: Add driver to Kconfig/Makefile RDMA/efa: Add the efa module RDMA/efa: Add EFA verbs implementation RDMA/efa: Add common command handlers RDMA/efa: Implement functions that submit and complete admin commands RDMA/efa: Add the ABI definitions RDMA/efa: Add the com service API definitions RDMA/efa: Add the efa_com.h file RDMA/efa: Add the efa.h header file RDMA/efa: Add EFA device definitions RDMA: Add EFA related definitions RDMA/umem: Remove hugetlb flag RDMA/bnxt_re: Use core helpers to get aligned DMA address RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks RDMA/umem: Add API to find best driver supported page size in an MR ...
2019-05-03RDMA: Introduce and use GID attr helper to read RoCE L2 fieldsParav Pandit1-2/+4
Instead of RoCE drivers figuring out vlan, smac fields while working on QP/AH, provide a helper routine to read the L2 fields such as vlan_id and source mac address. This moves logic from mlx5 driver to core for wider usage for RoCE ports. This is a preparation patch to allow detaching netdev in subsequent patch. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-6/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-01IB: Pass only ib_udata in function prototypesShamir Rabinovitch1-4/+4
Now when ib_udata is passed to all the driver's object create/destroy APIs the ib_udata will carry the ib_ucontext for every user command. There is no need to also pass the ib_ucontext via the functions prototypes. Make ib_udata the only argument psssed. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Remove 'uobject->context' dependency in object destroy APIsShamir Rabinovitch1-12/+20
Now that we have the udata passed to all the ib_xxx object destroy APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Pass uverbs_attr_bundle down ib_x destroy pathShamir Rabinovitch1-2/+2
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIsShamir Rabinovitch1-32/+40
Now when we have the udata passed to all the ib_xxx object creation APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-10IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udataJason Gunthorpe1-5/+9
ib_umem_get() can only be called in a method callback, which always has a udata parameter. This allows ib_umem_get() to derive the ucontext pointer directly from the udata without requiring the drivers to find it in some way or another. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
2018-12-20IB/mlx4: Remove set but not used variable 'pd'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/mlx4/qp.c: In function '_mlx4_ib_destroy_qp': drivers/infiniband/hw/mlx4/qp.c:1612:22: warning: variable 'pd' set but not used [-Wunused-but-set-variable] Fixes: e00b64f7c54c ("RDMA: Cleanup undesired pd->uobject usage") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA: Cleanup undesired pd->uobject usageShamir Rabinovitch1-10/+10
Drivers should be using udata to determine if a method is invoked from user space or kernel space. A pd does not necessarily say a different objects is kernel or user. Transforming the tests to use udata eliminates a large number of uobject references from the drivers. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18IB/mlx4: Utilize macro to calculate SQ spare sizeYuval Shaia1-1/+1
The macro MLX4_IB_SQ_HEADROOM calculates the spare room needed to be left. Use it instead of hard-coding the HW prefetch size. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11IB/mlx4: Remove unneeded NULL checkYuval Shaia1-3/+3
NULL check for kfree is unnecessary, remove it. Fixes: b42dde478bca ("IB/mlx4: Rework special QP creation error path") Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03RDMA: Remove unused parameter from ib_modify_qp_is_ok()Kamal Heib1-7/+1
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30IB/mlx4: Use 4K pages for kernel QP's WQE bufferJack Morgenstein1-175/+34
In the current implementation, the driver tries to allocate contiguous memory, and if it fails, it falls back to 4K fragmented allocation. Once the memory is fragmented, the first allocation might take a lot of time, and even fail, which can cause connection failures. This patch changes the logic to always allocate with 4K granularity, since it's more robust and more likely to succeed. This patch was tested with Lustre and no performance degradation was observed. Note: This commit eliminates the "shrinking WQE" feature. This feature depended on using vmap to create a virtually contiguous send WQ. vmap use was abandoned due to problems with several processors (see the commit cited below). As a result, shrinking WQE was available only with physically contiguous send WQs. Allocating such send WQs caused the problems described above. Therefore, as a side effect of eliminating the use of large physically contiguous send WQs, the shrinking WQE feature became unavailable. Warning example: worker/20:1: page allocation failure: order:8, mode:0x80d0 CPU: 20 PID: 513 Comm: kworker/20:1 Tainted: G OE ------------ Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: [<ffffffff81686d81>] dump_stack+0x19/0x1b [<ffffffff81186160>] warn_alloc_failed+0x110/0x180 [<ffffffff8118a954>] __alloc_pages_nodemask+0x9b4/0xba0 [<ffffffff811ce868>] alloc_pages_current+0x98/0x110 [<ffffffff81184fae>] __get_free_pages+0xe/0x50 [<ffffffff8133f6fe>] swiotlb_alloc_coherent+0x5e/0x150 [<ffffffff81062551>] x86_swiotlb_alloc_coherent+0x41/0x50 [<ffffffffa056b4c4>] mlx4_buf_direct_alloc.isra.7+0xc4/0x180 [mlx4_core] [<ffffffffa056b73b>] mlx4_buf_alloc+0x1bb/0x260 [mlx4_core] [<ffffffffa0b15496>] create_qp_common+0x536/0x1000 [mlx4_ib] [<ffffffff811c6ef7>] ? dma_pool_free+0xa7/0xd0 [<ffffffffa0b163c1>] mlx4_ib_create_qp+0x3b1/0xdc0 [mlx4_ib] [<ffffffffa0b01bc2>] ? mlx4_ib_create_cq+0x2d2/0x430 [mlx4_ib] [<ffffffffa0b21f20>] mlx4_ib_create_qp_wrp+0x10/0x20 [mlx4_ib] [<ffffffffa08f152a>] ib_create_qp+0x7a/0x2f0 [ib_core] [<ffffffffa06205d4>] rdma_create_qp+0x34/0xb0 [rdma_cm] [<ffffffffa08275c9>] kiblnd_create_conn+0xbf9/0x1950 [ko2iblnd] [<ffffffffa074077a>] ? cfs_percpt_unlock+0x1a/0xb0 [libcfs] [<ffffffffa0835519>] kiblnd_passive_connect+0xa99/0x18c0 [ko2iblnd] Fixes: 73898db04301 ("net/mlx4: Avoid wrong virtual mappings") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments constBart Van Assche1-10/+11
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA: Constify the argument of the work request conversion functionsBart Van Assche1-12/+13
When posting a send work request, the work request that is posted is not modified by any of the RDMA drivers. Make this explicit by constifying most ib_send_wr pointers in RDMA transport drivers. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-04IB/mlx4: Test port number before querying type.Tarick Bedeir1-1/+1
rdma_ah_find_type() can reach into ib_device->port_immutable with a potentially out-of-bounds port number, so check that the port number is valid first. Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-25IB/mlx4: Add support for drain SQ & RQYishai Hadas1-6/+148
This patch follows the logic from ib_core but considers the internal device state upon executing the involved commands. Specifically, Upon internal error state modify QP to an error state can be assumed to be success as each in-progress WR going to be flushed in error in any case as expected by that modify command. In addition, As the drain should never fail the driver makes sure that post_send/recv will succeed even if the device is already in an internal error state. As such once the driver will supply the simulated/SW CQEs the CQE for the drain WR will be handled as well. In case of an internal error state the CQE for the drain WR may be completed as part of the main task that handled the error state or by the task that issued the drain WR. As the above depends on scheduling the code takes the relevant locks and actions to make sure that the completion handler for that WR will always be called after that the post_send/recv were issued but not in parallel to the other task that handles the error flow. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18RDMA: Convert drivers to use the AH's sgid_attr in post_wr pathsParav Pandit1-6/+2
For UD the drivers were doing a sgid_index lookup into the cache to get the attrs, however we can now directly access the same attrs stores in the ib_ah instead and remove the lookup. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18IB/mlx4: Use GID attribute from ah attributeParav Pandit1-2/+1
While converting GID index from attribute to that of the HCA, GID attribute is available from the ah_attr. Make use of GID attribute to simplify the code and also avoid avoid GID query. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18RDMA: Convert drivers to use sgid_attr instead of sgid_indexParav Pandit1-20/+11
The core code now ensures that all driver callbacks that receive an rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present. Drivers can use this pointer instead of calling a query function with sgid_index. This simplifies the drivers and also avoids races where a gid_index lookup may return different data if it is changed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24IB/core: Reduce the places that use zgidParav Pandit1-1/+1
Instead of open coding memcmp() to check whether a given GID is zero or not, use a helper function to do so, and replace instances of memcpy(z,&zgid) with memset. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-27RDMA/mlx4: Add missed RSS hash inner header flagLeon Romanovsky1-1/+2
Despite being advertised to user space application, the RSS inner header flag was filtered by checks at the beginning of QP creation routine. Cc: <stable@vger.kernel.org> # 4.15 Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions") Fixes: 07d84f7b6adf ("IB/mlx4: Add support to RSS hash for inner headers") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-03IB/providers: Avoid null netdev check for RoCEParav Pandit1-1/+1
Now that IB core GID cache ensures that all RoCE entries have an associated netdev remove null checks from the provider drivers for clarity. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03IB/providers: Avoid zero GID check for RoCEParav Pandit1-2/+0
Now that the IB core GID cache ensures that a zero GID doesn't exist in the GID table remove zero GID checks from the provider drivers for clarity. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-21IB/mlx4: Eliminate duplicate barriers on weakly-ordered archsSinan Kaya1-2/+2
Code includes wmb() followed by writel(). writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Since code already has an explicit barrier call, changing writel() to writel_relaxed(). Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/mlx4: Add Scatter FCS support over WQ creationGuy Levi1-1/+18
As a default, for Ethernet packets, the device scatters only the payload of ingress packets. The scatter FCS feature lets the user to get the FCS (Ethernet's frame check sequence) in the received WR's buffer as a 4 Bytes trailer following the packet's payload. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-28IB/mlx4: Add support to RSS hash for inner headersGuy Levi1-0/+14
Support RSS hash for inner headers according to a new flag, MLX4_IB_RX_HASH_INNER provided by the vendor channel. In case the flag is set, RSS hash will be done on the inner headers of VXLAN packets (which are encapsulated). Non-encapsulated packets will be hashed according to the outer headers. Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27Merge branch 'from-rc' of ↵Jason Gunthorpe1-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git Patches for 4.16 that are dependent on patches sent to 4.15-rc. These are small clean ups for the vmw_pvrdma and i40iw drivers. * 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git: RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file i40iw: Change accelerated flag to bool
2017-12-18IB/mlx4: Remove unused ibpd parameterErez Alfasi1-2/+2
Remove unused ibpd parameter from create_qp_rss() function. Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-13IB/mlx4: Potential buffer overflow in _mlx4_set_path()Dan Carpenter1-0/+2
Smatch complains about this code: drivers/infiniband/hw/mlx4/qp.c:1827 _mlx4_set_path() error: buffer overflow 'dev->dev->caps.gid_table_len' 3 <= 255 The mlx4_ib_gid_index_to_real_index() does check that "port" is within bounds, but we don't check the return value for errors. It seems simple enough to add a check for that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-07IB/mlx4: Fix RSS hash fields restrictionsGuy Levi1-7/+19
Mistakenly the driver didn't allow RSS hash fields combinations which involve both IPv4 and IPv6 protocols. This bug caused to failures for user's use cases for RSS. Consequently, this patch fixes this bug and allows any combination that the HW can support. Additionally, the patch fixes the driver to return an error in case the user provides an unsupported mask for RSS hash fields. Fixes: 3078f5f1bd8b ("IB/mlx4: Add support for RSS QP") Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx4: Increase maximal message size under UD QPMark Bloch1-1/+1
Maximal message should be used as a limit to the max message payload allowed, without the headers. The ConnectX-3 check is done against this value includes the headers. When the payload is 4K this will cause the NIC to drop packets. Increase maximal message to 8K as workaround, this shouldn't change current behaviour because we continue to set the MTU to 4k. To reproduce; set MTU to 4296 on the corresponding interface, for example: ifconfig eth0 mtu 4296 (both server and client) On server: ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096 On client: ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096 Fixes: 6e0d733d9215 ("IB/mlx4: Allow 4K messages for UD QPs") Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx4: Add contig support for control objectsGuy Levi1-2/+6
Taking advantage of the optimization which was introduced in previous commit ("IB/mlx4: Use optimal numbers of MTT entries") to optimize the MTT usage for QP and CQ. Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/mlx4: Fix RSS's QPC attributes assignmentsGuy Levi1-7/+9
In the modify QP handler the base_qpn_udp field in the RSS QPC is overwrite later by irrelevant value assignment. Hence, ingress packets which gets to the RSS QP will be steered then to a garbage QPN. The patch fixes this by skipping the above assignment when a RSS QP is modified, also, the RSS context's attributes assignments are relocated just before the context is posted to avoid future issues like this. Additionally, this patch takes the opportunity to change the code to be disciplined to the device's manual and assigns the RSS QP context just at RESET to INIT transition. Fixes:3078f5f1bd8b ("IB/mlx4: Add support for RSS QP") Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-13/+13
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-08-29net/mlx4_core: Dynamically allocate structs at mlx4_slave_capEran Ben Elisha1-13/+13
In order to avoid temporary large structs on the stack, allocate them dynamically. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tal Alon <talal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24RDMA/mlx4: Properly annotate link layer variableLeon Romanovsky1-4/+2
The rdma_port_get_link_layer() returns enum rdma_link_layer as a return value, hence it is better to store the return value in specially annotated variable and not in int. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-24IB/mlx4: Check that reserved fields in mlx4_ib_create_qp_rss are zeroGuy Levi1-0/+3
According to mlx4 convention, need to fail the command due to a non-zero value in the user data which is expected to be zero. Fixes: 3078f5f1bd8b ("IB/mlx4: Add support for RSS QP") Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 11:32:09 +0000