summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/hfi1/driver.c
AgeCommit message (Collapse)AuthorFilesLines
2018-05-03IB/hfi1: Fix handling of FECN marked multicast packetMike Marciniszyn1-4/+15
The code for handling a marked UD packet unconditionally returns the dlid in the header of the FECN marked packet. This is not correct for multicast packets where the DLID is in the multicast range. The subsequent attempt to send the CNP with the multicast lid will cause the chip to halt the ack send context because the source lid doesn't match the chip programming. The send context will be halted and flush any other pending packets in the pio ring causing the CNP to not be sent. A part of investigating the fix, it was determined that the 16B work broke the FECN routine badly with inconsistent use of 16 bit and 32 bits types for lids and pkeys. Since the port's source lid was correctly 32 bits the type mixmatches need to be dealt with at the same time as fixing the CNP header issue. Fix these issues by: - Using the ports lid for as the SLID for responding to FECN marked UD packets - Insure pkey is always 16 bit in this and subordinate routines - Insure lids are 32 bits in this and subordinate routines Cc: <stable@vger.kernel.org> # 4.14.x Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-06IB/hfi1: Add a missing rcu_read_unlock()Bart Van Assche1-0/+1
This patch avoids that sparse reports the following: drivers/infiniband/hw/hfi1/driver.c:251:13: warning: context imbalance in 'rcv_hdrerr' - different lock contexts for basic block Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Add 16B rcvhdr trace supportDon Hiatt1-1/+3
Add trace_hfi1_rcvhdr support for bypass packets. While here, remove the etype argument as it is available in struct hfi1_packet. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Remove blind constants from 16B updateMike Marciniszyn1-2/+4
These values were introduced as part of the 16B code to account for the varying size of the LRH between the differing packet formats. Replace the blind constants with defines based on FIELD_SIZEOF() calls. Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Optimize process_receive_ib()Sebastian Sanchez1-14/+7
The arguments for trace_hfi1_rcvhdr() get computed every time in the hot path regardless of the whether the trace is on or off. This is seen to be costly with a profile. The handling of fault inject isolates the verbs device for all packets regardless of the presence of a RHF_DC_ERR error. Fix the first by computing trace_hfi1_rcvhdr() arguments within the trace itself, so that when the trace is off, the argument data isn't computed. Fix the second by moving the error check to handle_eflags() when an RHF error occurs and by testing for RHF_DC_ERR before executing the reset of handle_eflags(). Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Remove unnecessary fecn and becn fieldsSebastian Sanchez1-4/+0
packet->fecn and packet->becn are calculated in the hot path and are never used. Remove these fields as they show to be costly in a profile. Also, remove initialization for becn and fecn in process_ecn() as they're unconditionally assigned in the function and ensure fecn and becn variables use a boolean type. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Look up ibport using a pointer in receive pathSebastian Sanchez1-6/+8
In the receive path, hfi1_ibport is looked up by indexing into an array. A profile shows this to be expensive. The receive context data has a pointer to the ibport data, use that pointer instead. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Optimize packet type comparison using 9B and bypass code pathsSebastian Sanchez1-0/+4
The packet type comparison used to find out if a packet is a bypass packet in the hot path is an expensive operation as seen in a profile. Determine packet's pkey and migration bit through the bypass and 9B code paths instead. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-05IB/{hfi1, qib}: Fix a concurrency issue with device name in loggingMichael J. Ruhl1-8/+0
The get_unit_name() function crafts a string based on the device name and the device unit number. It then stores this in a static variable. This has concurrency issues as can be seen with this log: hfi1 0000:02:00.0: hfi1_1: read_idle_message: read idle message 0x203 hfi1 0000:01:00.0: hfi1_1: read_idle_message: read idle message 0x203 The PCI device ID (0000:02:00.0 vs. 0000:01:00.0) is correct for the message, but the device string hfi1_1 is incorrect (it should be hfi1_0 for the second log message). Remove get_unit_name() function. Instead, use the rvt accessor rvt_get_ibdev_name() to get the IB name string. Clean up any hfi1_early_xx calls that can now use the new path. QIB has the same (qib_get_unit_name()) issue. Updating as necessary. Remove qib_get_unit_name() function. Update log message that has redundant device name. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-05IB/{rdmavt, hfi1, qib}: Remove get_card_name() downcallMichael J. Ruhl1-8/+0
rdmavt has a down call to client drivers to retrieve a crafted card name. This name should be the IB defined name. Rather than craft the name each time it is needed, simply retrieve the IB allocated name from the IB device. Update the function name to reflect its application. Clean up driver code to match this change. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/hfi1: Do not allocate PIO send contexts for VNICNiranjana Vishwanathapura1-3/+2
OPA VNIC does not use PIO contexts and instead only uses SDMA engines. Do not allocate PIO contexts for VNIC ports. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18Merge branch 'timer_setup' into for-nextDoug Ledford1-4/+3
Conflicts: drivers/infiniband/hw/cxgb4/cm.c drivers/infiniband/hw/qib/qib_driver.c drivers/infiniband/hw/qib/qib_mad.c There were minor fixups needed in these files. Just minor context diffs due to patches from independent sources touching the same basic area. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Convert timers to use timer_setup()Kees Cook1-4/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Switches test of .data field to .function, since .data will be going away. Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-14IB/hfi1: Define hfi1_handle_cnp_tbl[] onceBart Van Assche1-0/+6
Move the hfi1_handle_cnp_tbl[] from a header file to a .c file such that only one copy ends up in the hfi1 kernel module. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Add a safe wrapper for _rcd_get_by_indexMichael J. Ruhl1-2/+2
hfi1_rcd_get_by_index assumes that the given index is in the correct range. In most cases this is correct because the index is bounded by a loop. For these cases, adding a range check to the function is redundant. For the use case that is not bounded by the loop range, a _safe wrapper function is needed to validate the index before accessing the rcd array. Add a _safe wrapper to _get_by_index to validate the index range. Update appropriate call sites with the new _safe function. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Add kernel receive context info to debugfsKaike Wan1-0/+59
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Add 16B UD supportDon Hiatt1-14/+21
Add 16B bypass packet support for UD traffic types. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Add support to process 16B header errorsDon Hiatt1-11/+47
Enhance hdr_rcverr() to also handle errors during 16B bypass packet receive. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Add support to receive 16B bypass packetsDon Hiatt1-15/+112
We introduce a struct hfi1_16b_header to support 16B headers. 16B bypass packets are received by the driver and processed similar to 9B packets. Add basic support to handle 16B packets. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hf1: User context locking is inconsistentMichael J. Ruhl1-24/+47
There is a mixture of mutex and spinlocks to protect receive context (rcd/uctxt) information. This is not used consistently. Use the mutex to protect device receive context information only. Use the spinlock to protect sub context information only. Protect access to items in the rcd array with a spinlock and reference count. Remove spinlock around dd->rcd array cleanup. Since interrupts are disabled and cleaned up before this point, this lock is not useful. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Create workqueue for link eventsSebastian Sanchez1-1/+1
Currently, link down interrupts queue link entries on a workqueue intended for sending events only. Create a workqueue for queuing link events. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Size rcd array index correctly and consistentlyMichael J. Ruhl1-7/+8
The array index for the rcd array is sized several different ways throughout the code. Use the user interface size (u16) as the standard size and update the necessary code to reflect this. u16 is large enough for the largest amount of supported contexts. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Fix bar0 mapping to use write combiningMike Marciniszyn1-2/+2
When the debugpat kernel boot flag is turned on the following traces are printed: [ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000 [ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track uncached-minus, req write-combining, ret uncached-minus [ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray: ffffc9000a980000 The ioremap_wc() clearly is not returning a write combining mapping due to an overlap where the RcvArray is mapped in a uncached mapping prior to creating the proposed write combining mapping. The patch replaces the single base register for uncached CSRs that used to overlap the RcvArray with two mappings. One, kregbase1, from the bar0 up to the RcvArray and another, kregbase2, from the end of the RcvArray to the pio send buffer space. A new dd field, base2_start, is used to convert the zero-based offset in the CSR routines to the correct kregbase1/kregbase2 mapping. A single direct write of the RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access using the new disjoint mapping. Additionally, the kregend field is deleted since it is only ever written. patdebug now shows the RcvArray as write combining: [ 35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track write-combining, req write-combining, ret write-combining To insulate from any potential issues with write combining, all writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill(). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-27Merge branch 'misc' into k.o/for-nextDoug Ledford1-1/+0
2017-07-24RDMA: Remove useless MODULE_VERSIONLeon Romanovsky1-1/+0
All modules in drivers/infiniband defined and used MODULE_VERSION, which was pointless because the kernel version describes their state more accurate then those arbitrary numbers. Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Sagi Grimbrg <sagi@grimberg.me> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Modify handling of physical link state by Host DriverByczkowski, Jakub1-3/+5
Ensure states returned to the Fabric Manager are consistent with the OPA specification by caching the physical state along with the logical state. Reviewed-by: Stuart Summers <john.s.summers@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrzej Kotlowski <andrzej.kotlowski@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove subtraction of uninitialized valueDennis Dalessandro1-1/+0
In process_receive_packet the packet header field is used to calculate the length of the packet. However this is not necessarily setup. In fact only if the ECN prescan is enabled will the packet header be valid at this point. The code works as is because we do not do anything with the packet length at this point in the packet processing. The length and header are setup correctly in hfi1_setup_ib_header which is called by the following sequence: process_receive_packet() -> rhf_receieve_function_map[]() --> process_receive_ib() ---> hfi1_setup_9B_packet() ----> hfi1_setup_ib_header() Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Setup common IB fields in hfi1_packet structDon Hiatt1-47/+111
We move many common IB fields into the hfi1_packet structure and set them up in a single function. This allows us to set the fields in a single place and not deal with them throughout the driver. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Add functions to parse BTH/IB headersDon Hiatt1-3/+3
Improve code readablity by adding inline functions to read specific BTH/IB fields without knowledge of byte offsets. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Fix an assign/ordering issue with shared context IDsMichael J. Ruhl1-1/+1
The current algorithm for generating sub-context IDs is FILO. If the contexts are not closed in that order, the uniqueness of the ID will be compromised. I.e. logging the creation/deletion of context IDs with an application that assigns and closes in a FIFO order reveals: cache_id: assign: uctxt: 3 sub_ctxt: 0 cache_id: assign: uctxt: 3 sub_ctxt: 1 cache_id: assign: uctxt: 3 sub_ctxt: 2 cache_id: close: uctxt: 3 sub_ctxt: 0 cache_id: assign: uctxt: 3 sub_ctxt: 2 <<< The sub_ctxt ID 2 is reused incorrectly. Update the sub-context ID assign algorithm to use a bitmask of in_use contexts. The new algorithm will allow the contexts to be closed in any order, and will only re-use unused contexts. Size subctxt and subctxt_cnt to match the user API size. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Search shared contexts on the opened device, not all devicesMichael J. Ruhl1-36/+0
The search for available shared contexts walks each registered hfi1 device. This search is too broad because other devices may not be on the same fabric, and using its contexts could cause unexpected behavior. Removed walking the list of devices, limiting the search to the opened device. With the device walk removed, the hfi1_devdata (dd) is not available. Added it to the hfi1_filedata for reference. With this change, hfi1_count_units() was rendered obsolete and was removed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Name function prototype parametersMichael J. Ruhl1-2/+2
To improve the readability of function prototypes, give the parameters names. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Use rdma_ah_attr accessor functionsDasaratharaman Chandramouli1-2/+2
Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Use defines from common headersDon Hiatt1-4/+4
Move FECN and BECN related defines to common header files Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Add functions to parse 9B headersDon Hiatt1-7/+6
These inline functions improve code readability by enabling callers to read specific fields from the header without knowledge of byte offsets. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Rename hdr2sc to hfi1_9B_get_sc5Dasaratharaman Chandramouli1-3/+4
The function really returned the 5-bit sc value from the header and rhf. hdr2sc didn't quite describe what it did. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-20IB/hfi1: Virtual Network Interface Controller (VNIC) HW supportVishwanathapura, Niranjana1-12/+40
HFI1 HW specific support for VNIC functionality. Dynamically allocate a set of contexts for VNIC when the first vnic port is instantiated. Allocate VNIC contexts from user contexts pool and return them back to the same pool while freeing up. Set aside enough MSI-X interrupts for VNIC contexts and assign them when the contexts are allocated. On the receive side, use an RSM rule to spread TCP/UDP streams among VNIC contexts. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-20IB/hfi1: OPA_VNIC RDMA netdev supportVishwanathapura, Niranjana1-4/+21
Add support to create and free OPA_VNIC rdma netdev devices. Implement netstack interface functionality including xmit_skb, receive side NAPI etc. Also implement rdma netdev control functions. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/hfi1: Add transmit fault injection featureDon Hiatt1-0/+11
Add ability to fault packets on transmit by opcode. Dropping by packet can be achieved by setting the mask to 0. In order to drop non-verbs traffic we set PbcInsertHrc to NONE (0x2). The packet will still be delivered to the receiving node but a KHdrHCRCErr (KDETH packet with a bad HCRC) will be triggered and the packet will not be delivered to the correct context. In order to drop regular verbs traffic we set the PbcTestEbp flag. The packet will still be delivered to the receiving node but a 'late ebp error' will be triggered and will be dropped. A global toggle (/sys/kernel/debug/hfi1/hfi1_X/fault_suppress_err) has been added to suppress the error messages on the receive node when a packet was faulted on the sending node. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/hfi1: Add receive fault injection featureDon Hiatt1-0/+8
Add fault injection capability: - Drop packets unconditionally (fault_by_packet) - Drop packets based on opcode (fault_by_opcode) This feature reacts to the global FAULT_INJECTION config flag. The faulting traces have been added: - misc/fault_opcode - misc/fault_packet See 'Documentation/fault-injection/fault-injection.txt' for details. Examples: - Dropping packets by opcode: /sys/kernel/debug/hfi1/hfi1_X/fault_opcode # Enable fault echo Y > fault_by_opcode # Setprobability of dropping (0-100%) # echo 25 > probability # Set opcode echo 0x64 > opcode # Number of times to fault echo 3 > times # An optional mask allows you to fault # a range of opcodes echo 0xf0 > mask /sys/kernel/debug/hfi1/hfi1_X/fault_stats contains a value in parentheses to indicate number of each opcode dropped. - Dropping packets unconditionally /sys/kernel/debug/hfi1/hfi1_X/fault_packet # Enable fault echo Y > fault_by_packet /sys/kernel/debug/hfi1/hfi1_X/fault_packet/fault_stats contains the number of packets dropped. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Access hfi1_ibport through rcd pointerSebastian Sanchez1-2/+2
Receive code paths use the QP's device and port number to access the struct hfi1_ibport. When an instance of struct hfi1_ctxtdata is present, it can be used to access struct hfi1_ibport through a pointer. This makes struct hfi1_ibport lookup time faster as an array doesn't have to be indexed and access fields in other cache-lines. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Process qp wait list in IRQ thread periodicallyMike Marciniszyn1-54/+67
In the event that the IRQ thread is extremely busy, the processing of an rcd wait list can be delayed by quite a bit until the IRQ thread completes its work. The QP reset reference count wait can then appear to be stuck, thus causing up a QP destroy to emit the hung task diagnostic. Fix by processing the qp wait list periodically from the thread. The interval is a multiple (currently 4) of the MAX_PKT_RECV. Also, reduce some of the excessive inlining. The guidelines are per packet is ok inline, otherwise the choice is based on likelyhood of execution. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-15Merge tag 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is the complete update for the rdma stack for this release cycle. Most of it is typical driver and core updates, but there is the entirely new VMWare pvrdma driver. You may have noticed that there were changes in DaveM's pull request to the bnxt Ethernet driver to support a RoCE RDMA driver. The bnxt_re driver was tentatively set to be pulled in this release cycle, but it simply wasn't ready in time and was dropped (a few review comments still to address, and some multi-arch build issues like prefetch() not working across all arches). Summary: - shared mlx5 updates with net stack (will drop out on merge if Dave's tree has already been merged) - driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe - debug cleanups - new connection rejection helpers - SRP updates - various misc fixes - new paravirt driver from vmware" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits) IB: Add vmw_pvrdma driver IB/mlx4: fix improper return value IB/ocrdma: fix bad initialization infiniband: nes: return value of skb_linearize should be handled MAINTAINERS: Update Intel RDMA RNIC driver maintainers MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers IB/core: fix unmap_sg argument qede: fix general protection fault may occur on probe IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc mlx5, calc_sq_size(): Make a debug message more informative mlx5: Remove a set-but-not-used variable mlx5: Use { } instead of { 0 } to init struct IB/srp: Make writing the add_target sysfs attr interruptible IB/srp: Make mapping failures easier to debug IB/srp: Make login failures easier to debug IB/srp: Introduce a local variable in srp_add_one() IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build IB/multicast: Check ib_find_pkey() return value IPoIB: Avoid reading an uninitialized member variable IB/mad: Fix an array index check ...
2016-12-11IB/hfi1: Replace qp->refcount release code with standard driver wrapperSebastian Sanchez1-2/+1
Some parts of the code don't use the standard release wrapper rvt_put_qp() for decrementing and testing the refcount to then try to use a resource. Replace this code with the standard driver wrapper. Fixes: Commit 4d6f85c3fa55 ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-15IB/hfi1: Fix ECN processing in prescan_rxqDasaratharaman Chandramouli1-9/+11
When processing ECN via the prescan_rxq path, some fields in the packet structure are passed uninitialized. This can potentially cause NULL pointer exceptions during ECN handling. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-15IB/hfi1: Fix status error code for unsupported packetsJakub Pawlak1-2/+15
Set the status code BAD_L2 when unsupported type of packet is received and dropped. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/qib,IB/hfi: Use core common header fileMike Marciniszyn1-18/+17
Use common header file structs, defines, and accessors in the drivers. The old declarations are removed. The repositioning of the includes allows for the removal of hfi1_message_header and replaces its use with ib_header. Also corrected are two issues with set_armed_to_active(): - The "packet" parameter is now a pointer as it should have been - The etype is validated to insure that the header is correct Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Validate header in set_armed_activeMike Marciniszyn1-1/+2
Validate the etype to insure that the header is correct. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Pass packet ptr to set_armed_activeMike Marciniszyn1-5/+5
The "packet" parameter was being passed on the stack, change it to a pointer. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Use hdr2sc function to calculate 5-bit SCDasaratharaman Chandramouli1-3/+1
The interface is used to compute the 5-bit SC field from the LRH and the RHF bits. Modify code to use the interface instead. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 05:07:32 +0000