summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/cxgb4/cm.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-28iw_cxgb4: Add support for clipHariprasad S1-4/+72
Add support for ipv6 address handling clip api provided by lld Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28iw_cxgb4: set the default MPA version to 2Hariprasad S1-2/+2
This enables ORD/IRD negotiation and its about time to enable it by default Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-11iw_cxgb4: use wildcard mapping for getting remote addr infoSteve Wise1-8/+8
For listening endpoints bound to the wildcard address, we need to pass the wildcard address mapping to iwpm_get_remote_info() instead of the mapped address of the new child connection. Without this fix, and with iwarp port mapping enabled, each iw_cxgb4 connection that is spawned from a listening endpoint bound to the wildcard address, will generate an annoying dmesg entry about failing to find the remote address mapping info, and the connection state displayed in debugfs under /sys/kernel/debug/iw_cxgb4/<pci-slot-no>/eps will not have the peer's address/port mapping info. The connection still works though. Fixes: 5b6b8fe ("RDMA/cxgb4: Report the actual address of the remote connecting peer") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: Remove negative advice dmesg warningsHariprasad S1-9/+18
Remove these log messages in favor of per-endpoint counters as well as device-global counters that can be inspected via debugfs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05RDMA/cxgb4: Report the actual address of the remote connecting peerSteve Wise1-4/+50
Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper Also setup the passive side endpoint to correctly display the actual and mapped addresses for the new connection. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: 32b platform fixesHariprasad S1-1/+1
- get_dma_mr() was using ~0UL which is should be ~0ULL. This causes the DMA MR to get setup incorrectly in hardware. - wr_log_show() needed a 64b divide function div64_u64() instead of doing division directly. - fixed warnings about recasting a pointer to a u64 Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: Cleanup register defines/MACROSHariprasad S1-2/+2
Cleanup macros and register defines for consistency Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-01-16iw_cxgb4: Cleanup register defines/MACROS defined in t4fw_ri_api.hHariprasad Shenai1-15/+15
Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros ↵Hariprasad Shenai1-10/+10
related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12iw_cxgb4/cxgb4/cxgb4i: Cleanup register defines/MACROS related to CM CPL ↵Hariprasad Shenai1-39/+39
messages This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15RDMA/cxgb4: Handle NET_XMIT return codesHariprasad S1-0/+4
cxgb4_create_server() and cxgb4_create_server6() return NET_XMIT_* values or a negative errno. iw_cxgb4 need to handle this correctly. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15RDMA/cxgb4: Fix locking issue in process_mpa_requestHariprasad Shenai1-1/+2
Fix the following lockdep report: ============================================= [ INFO: possible recursive locking detected ] 3.17.0+ #3 Tainted: G E --------------------------------------------- kworker/u64:3/299 is trying to acquire lock: (&epc->mutex){+.+.+.}, at: [<ffffffffa074e07a>] process_mpa_request+0x1aa/0x3e0 [iw_cxgb4] but task is already holding lock: (&epc->mutex){+.+.+.}, at: [<ffffffffa074e34e>] rx_data+0x9e/0x1f0 [iw_cxgb4] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&epc->mutex); lock(&epc->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u64:3/299: #0: ("%s""iw_cxgb4"){.+.+.+}, at: [<ffffffff8106f14d>] process_one_work+0x13d/0x4d0 #1: (skb_work){+.+.+.}, at: [<ffffffff8106f14d>] process_one_work+0x13d/0x4d0 #2: (&epc->mutex){+.+.+.}, at: [<ffffffffa074e34e>] rx_data+0x9e/0x1f0 [iw_cxgb4] stack backtrace: CPU: 2 PID: 299 Comm: kworker/u64:3 Tainted: G E 3.17.0+ #3 Hardware name: Dell Inc. PowerEdge T110/0X744K, BIOS 1.2.1 01/28/2010 Workqueue: iw_cxgb4 process_work [iw_cxgb4] ffff8800b91593d0 ffff8800b8a2f9f8 ffffffff815df107 0000000000000001 ffff8800b9158750 ffff8800b8a2fa28 ffffffff8109f0e2 ffff8800bb768a00 ffff8800b91593d0 ffff8800b9158750 0000000000000000 ffff8800b8a2fa88 Call Trace: [<ffffffff815df107>] dump_stack+0x49/0x62 [<ffffffff8109f0e2>] print_deadlock_bug+0xf2/0x100 [<ffffffff810a0f04>] validate_chain+0x454/0x700 [<ffffffff810a1574>] __lock_acquire+0x3c4/0x580 [<ffffffffa074e07a>] ? process_mpa_request+0x1aa/0x3e0 [iw_cxgb4] [<ffffffff810a17cc>] lock_acquire+0x9c/0x110 [<ffffffffa074e07a>] ? process_mpa_request+0x1aa/0x3e0 [iw_cxgb4] [<ffffffff815e111b>] mutex_lock_nested+0x4b/0x360 [<ffffffffa074e07a>] ? process_mpa_request+0x1aa/0x3e0 [iw_cxgb4] [<ffffffff810c181a>] ? del_timer_sync+0xaa/0xd0 [<ffffffff810c1770>] ? try_to_del_timer_sync+0x70/0x70 [<ffffffffa074e07a>] process_mpa_request+0x1aa/0x3e0 [iw_cxgb4] [<ffffffffa074a3ec>] ? update_rx_credits+0xec/0x140 [iw_cxgb4] [<ffffffffa074e381>] rx_data+0xd1/0x1f0 [iw_cxgb4] [<ffffffff8109ff23>] ? mark_held_locks+0x73/0xa0 [<ffffffff815e4b90>] ? _raw_spin_unlock_irqrestore+0x40/0x70 [<ffffffff810a020d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff810a02dd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffa074c931>] process_work+0x51/0x80 [iw_cxgb4] [<ffffffff8106f1c8>] process_one_work+0x1b8/0x4d0 [<ffffffff8106f14d>] ? process_one_work+0x13d/0x4d0 [<ffffffff8106f600>] worker_thread+0x120/0x3c0 [<ffffffff8106f4e0>] ? process_one_work+0x4d0/0x4d0 [<ffffffff81074a0e>] kthread+0xde/0x100 [<ffffffff815e4b40>] ? _raw_spin_unlock_irq+0x30/0x40 [<ffffffff81074930>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815e512c>] ret_from_fork+0x7c/0xb0 [<ffffffff81074930>] ? __init_kthread_worker+0x70/0x70 Based on original work by Steve Wise <swise@opengridcomputing.com>. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-11-22RDMA/cxgb4/csiostor: Cleansup FW related macros/register defines for PF/VF ↵Hariprasad Shenai1-1/+1
and LDST This patch cleanups PF/VF and LDST related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-22RDMA/cxgb4: Cleanup Filter related macros/register definesHariprasad Shenai1-7/+7
This patch cleanups all filter related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13cxgb4i/cxgb4 : Refactor macros to conform to uniform standardsAnish Bhatt1-52/+52
Refactored all macros used in cxgb4i as part of previously started cxgb4 macro names cleanup. Makes them more uniform and avoids namespace collision. Minor changes in other drivers where required as some of these macros are used by multiple drivers, affected drivers are iw_cxgb4, cxgb4(vf) & csiostor Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4: Cleanup macros so they follow the same style and look consistent, part 2Hariprasad Shenai1-28/+28
Various patches have ended up changing the style of the symbolic macros/register defines to different style. As a result, the current kernel.org files are a mix of different macro styles. Since this macro/register defines is used by different drivers a few patch series have ended up adding duplicate macro/register define entries with different styles. This makes these register define/macro files a complete mess and we want to make them clean and consistent. This patch cleans up a part of it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14RDMA/cxgb4: Fix ntuple calculation for ipv6 and remove duplicate lineHariprasad S1-4/+3
This fixes ntuple calculation for IPv6 active open request for T5 adapter. And also removes an duplicate line which got added in commit 92e7ae71726c ("iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connections") Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-14RDMA/cxgb4: Add missing neigh_release in find_routeHariprasad S1-0/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-14RDMA/cxgb4: Take IPv6 into account for best_mtu and set_emssHariprasad S1-8/+16
best_mtu and set_emss were not considering ipv6 header for ipv6 case. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+11
Conflicts: drivers/infiniband/hw/cxgb4/device.c The cxgb4 conflict was simply overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21iw_cxgb4: log detailed warnings for negative adviceHariprasad Shenai1-6/+23
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15cxgb4/iw_cxgb4: use firmware ord/ird resource limitsHariprasad Shenai1-23/+57
Advertise a larger max read queue depth for qps, and gather the resource limits from fw and use them to avoid exhaustinq all the resources. Design: cxgb4: Obtain the max_ordird_qp and max_ird_adapter device params from FW at init time and pass them up to the ULDs when they attach. If these parameters are not available, due to older firmware, then hard-code the values based on the known values for older firmware. iw_cxgb4: Fix the c4iw_query_device() to report these correct values based on adapter parameters. ibv_query_device() will always return: max_qp_rd_atom = max_qp_init_rd_atom = min(module_max, max_ordird_qp) max_res_rd_atom = max_ird_adapter Bump up the per qp max module option to 32, allowing it to be increased by the user up to the device max of max_ordird_qp. 32 seems to be sufficient to maximize throughput for streaming read benchmarks. Fail connection setup if the negotiated IRD exhausts the available adapter ird resources. So the driver will track the amount of ird resource in use and not send an RI_WR/INIT to FW that would reduce the available ird resources below zero. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-13RDMA/cxgb4: Call iwpm_init() only onceSteve Wise1-1/+1
We need to only register with the iwpm core once. Currently it is being done for every adapter, which causes a failure for each adapter but the first, making multiple adapters unusable. Fixes: 9eccfe109b27 ("RDMA/cxgb4: Add support for iWARP Port Mapper user space service") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-07-08RDMA/cxgb4: Clean up connection on ARP errorHariprasad S1-1/+10
Based on origninal work by Steve Wise <swise@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-07-08RDMA/cxgb4: Fix skb_leak in reject_cr()Hariprasad S1-1/+0
Based on origninal work by Steve Wise <swise@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-07-01rdma/cxgb4: Fixes cxgb4 probe failure in VM when PF is exposed through PCI ↵Hariprasad Shenai1-1/+2
Passthrough Change logic which determines our Physical Function at PCI Probe time. Now we read the PL_WHOAMI register and get the Physical Function. Pass Physical Function to Upper Layer Drivers in lld_info structure in the new field "pf" added to lld_info. This is useful for the cases where the PF, say PF4, is attached to a Virtual Machine via some form of "PCI Pass Through" technology and the PCI Function shows up as PF0 in the VM. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-15/+112
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-10iw_cxgb4: don't truncate the recv window sizeHariprasad Shenai1-4/+50
Fixed a bug that shows up with recv window sizes that exceed the size of the RCV_BUFSIZ field in opt0 (>= 1024K). If the recv window exceeds this, then we specify the max possible in opt0, add add the rest in via a RX_DATA_ACK credits. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-10iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connectionsHariprasad Shenai1-11/+62
Select the appropriate hw mtu index and initial sequence number to optimize hw memory performance. Add new cxgb4_best_aligned_mtu() which allows callers to provide enough information to be used to [possibly] select an MTU which will result in the TCP Data Segment Size (AKA Maximum Segment Size) to be an aligned value. If an RTR message exhange is required, then align the ISS to 8B - 1 + 4, so that after the SYN the send seqno will align on a 4B boundary. The RTR message exchange will leave the send seqno aligned on an 8B boundary. If an RTR is not required, then align the ISS to 8B - 1. The goal is to have the send seqno be 8B aligned when we send the first FPDU. Based on original work by Casey Leedom <leeedom@chelsio.com> and Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-10Merge branches 'core', 'cxgb3', 'cxgb4', 'iser', 'iwpm', 'misc', 'mlx4', ↵Roland Dreier1-40/+157
'mlx5', 'noio', 'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-06-10RDMA/cxgb4: Add support for iWARP Port Mapper user space serviceSteve Wise1-31/+149
Based on original work by Vipul Pandya. Signed-off-by: Steve Wise <swise@opengridcomputing.com> [ Fix htons -> ntohs to make sparse happy. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-19RDMA/cxgb4: Fix vlan supportSteve Wise1-9/+8
RDMA connections over a vlan interface don't work due to import_ep() not using the correct egress device. - use the real device in import_ep() - use rdma_vlan_dev_real_dev() in get_real_dev(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-28RDMA/cxgb4: Force T5 connections to use TAHOE congestion controlSteve Wise1-0/+8
This is required to work around a T5 HW issue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-28RDMA/cxgb4: Fix endpoint mutex deadlocksSteve Wise1-11/+20
In cases where the cm calls c4iw_modify_rc_qp() with the endpoint mutex held, they must be called with internal == 1. rx_data() and process_mpa_reply() are not doing this. This causes a deadlock because c4iw_modify_rc_qp() might call c4iw_ep_disconnect() in some !internal cases, and c4iw_ep_disconnect() acquires the endpoint mutex. The design was intended to only do the disconnect for !internal calls. Change rx_data(), FPDU_MODE case, to call c4iw_modify_rc_qp() with internal == 1, and then disconnect only after releasing the mutex. Change process_mpa_reply() to call c4iw_modify_rc_qp(TERMINATE) with internal == 1 and set a new attr flag telling it to send a TERMINATE message. Previously this was implied by !internal. Change process_mpa_reply() to return whether the caller should disconnect after releasing the endpoint mutex. Now rx_data() will do the disconnect in the cases where process_mpa_reply() wants to disconnect after the TERMINATE is sent. Change c4iw_modify_rc_qp() RTS->TERM to only disconnect if !internal, and to send a TERMINATE message if attrs->send_term is 1. Change abort_connection() to not aquire the ep mutex for setting the state, and make all calls to abort_connection() do so with the mutex held. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-11RDMA/cxgb4: Endpoint timeout fixesSteve Wise1-33/+56
1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03Merge tag 'rdma-for-linus' of ↵Linus Torvalds1-38/+72
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.15: - The biggest change is core API extensions and mlx5 low-level driver support for handling DIF/DIX-style protection information, and the addition of PI support to the iSER initiator. Target support will be arriving shortly through the SCSI target tree. - A nice simplification to the "umem" memory pinning library now that we have chained sg lists. Kudos to Yishai Hadas for realizing our code didn't have to be so crazy. - Another nice simplification to the sg wrappers used by qib, ipath and ehca to handle their mapping of memory to adapter. - The usual batch of fixes to bugs found by static checkers etc. from intrepid people like Dan Carpenter and Yann Droneaud. - A large batch of cxgb4, ocrdma, qib driver updates" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits) RDMA/ocrdma: Unregister inet notifier when unloading ocrdma RDMA/ocrdma: Fix warnings about pointer <-> integer casts RDMA/ocrdma: Code clean-up RDMA/ocrdma: Display FW version RDMA/ocrdma: Query controller information RDMA/ocrdma: Support non-embedded mailbox commands RDMA/ocrdma: Handle CQ overrun error RDMA/ocrdma: Display proper value for max_mw RDMA/ocrdma: Use non-zero tag in SRQ posting RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr() RDMA/ocrdma: Increment abi version count RDMA/ocrdma: Update version string be2net: Add abi version between be2net and ocrdma RDMA/ocrdma: ABI versioning between ocrdma and be2net RDMA/ocrdma: Allow DPP QP creation RDMA/ocrdma: Read ASIC_ID register to select asic_gen RDMA/ocrdma: SQ and RQ doorbell offset clean up RDMA/ocrdma: EQ full catastrophe avoidance RDMA/cxgb4: Disable DSGL use by default RDMA/cxgb4: rx_data() needs to hold the ep mutex ...
2014-04-02RDMA/cxgb4: rx_data() needs to hold the ep mutexSteve Wise1-7/+9
To avoid racing with other threads doing close/flush/whatever, rx_data() should hold the endpoint mutex. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-02RDMA/cxgb4: Drop RX_DATA packets if the endpoint is goneSteve Wise1-0/+2
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-02RDMA/cxgb4: Lock around accept/reject downcallsSteve Wise1-10/+21
There is a race between ULP threads doing an accept/reject, and the ingress processing thread handling close/abort for the same connection. The accept/reject path needs to hold the lock to serialize these paths. Signed-off-by: Steve Wise <swise@opengridcomputing.com> [ Fold in locking fix found by Dan Carpenter <dan.carpenter@oracle.com>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-24RDMA/cxgb4: Update snd_seq when sending MPA messagesSteve Wise1-0/+3
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-24RDMA/cxgb4: Connect_request_upcall fixesSteve Wise1-16/+24
When processing an MPA Start Request, if the listening endpoint is DEAD, then abort the connection. If the IWCM returns an error, then we must abort the connection and release resources. Also abort_connection() should not post a CLOSE event, so clean that up too. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-24RDMA/cxgb4: Fix possible memory leak in RX_PKT processingSteve Wise1-1/+8
If cxgb4_ofld_send() returns < 0, then send_fw_pass_open_req() must free the request skb and the saved skb with the tcp header. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-20RDMA/cxgb4: Default peer2peer mode to 1Steve Wise1-2/+2
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-20RDMA/cxgb4: Always release neigh entrySteve Wise1-1/+1
Always release the neigh entry in rx_pkt(). Based on original work by Santosh Rastapur <santosh@chelsio.com>. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-20RDMA/cxgb4: Allow loopback connectionsSteve Wise1-1/+2
find_route() must treat loopback as a valid egress interface. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-14cxgb4/iw_cxgb4: Treat CPL_ERR_KEEPALV_NEG_ADVICE as negative adviceSteve Wise1-12/+12
Based on original work by Anand Priyadarshee <anandp@chelsio.com>. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13RDMA/cxgb4: Add missing neigh_release in LE-Workaround pathKumar Sanghvi1-0/+1
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-22RDMA/cxgb4: Use cxgb4_select_ntuple to correctly calculate ntuple fieldsKumar Sanghvi1-54/+17
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22RDMA/cxgb4: Server filters are supported only for IPv4Kumar Sanghvi1-1/+2
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22RDMA/cxgb4: Calculate the filter server TID properlyKumar Sanghvi1-3/+1
Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 21:59:25 +0000