summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/core/agent.c
AgeCommit message (Collapse)AuthorFilesLines
2017-05-01IB/core: Rename ib_destroy_ah to rdma_destroy_ahDasaratharaman Chandramouli1-2/+2
Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the rename of the ib address handle attribute Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-03IB/core: Remove debug prints after allocation failureLeon Romanovsky1-1/+0
The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-08IB: split struct ib_send_wrChristoph Hellwig1-1/+1
This patch split up struct ib_send_wr so that all non-trivial verbs use their own structure which embedds struct ib_send_wr. This dramaticly shrinks the size of a WR for most common operations: sizeof(struct ib_send_wr) (old): 96 sizeof(struct ib_send_wr): 48 sizeof(struct ib_rdma_wr): 64 sizeof(struct ib_atomic_wr): 96 sizeof(struct ib_ud_wr): 88 sizeof(struct ib_fast_reg_wr): 88 sizeof(struct ib_bind_mw_wr): 96 sizeof(struct ib_sig_handover_wr): 80 And with Sagi's pending MR rework the fast registration WR will also be down to a reasonable size: sizeof(struct ib_fastreg_wr): 64 Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt] Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc] Tested-by: Haggai Eran <haggaie@mellanox.com> Tested-by: Sagi Grimberg <sagig@mellanox.com> Tested-by: Steve Wise <swise@opengridcomputing.com>
2015-07-14IB: Add rdma_cap_ib_switch helper and use where appropriateHal Rosenstock1-2/+2
Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Add final OPA MAD processingIra Weiny1-2/+5
For devices which support OPA MADs 1) Use previously defined SMP support functions. 2) Pass correct base version to ib_create_send_mad when processing OPA MADs. 3) Process out_mad_key_index returned by agents for a response. This is necessary because OPA SMP packets must carry a valid pkey. 4) Carry the correct segment size (OPA vs IBTA) of RMPP messages within ib_mad_recv_wc. 5) Handle variable length OPA MADs by: * Adjusting the 'fake' WC for locally routed SMP's to represent the proper incoming byte_len * out_mad_size is used from the local HCA agents 1) when sending agent responses on the wire 2) when passing responses through the local_completions function NOTE: wc.byte_len includes the GRH length and therefore is different from the in_mad_size specified to the local HCA agents. out_mad_size should _not_ include the GRH length as it is added Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Convert allocations from kmem_cache to kzallocIra Weiny1-4/+5
This patch implements allocating alternate receive MAD buffers within the MAD stack. Support for OPA to send/recv variable sized MADs is implemented later. 1) Convert MAD allocations from kmem_cache to kzalloc kzalloc is more flexible to support devices with different sized MADs and research and testing showed that the current use of kmem_cache does not provide performance benefits over kzalloc. 2) Change struct ib_mad_private to use a flex array for the mad data 3) Allocate ib_mad_private based on the size specified by devices in rdma_max_mad_size. 4) Carry the allocated size in ib_mad_private to be used when processing ib_mad_private objects. 5) Alter DMA mappings based on the mad_size of ib_mad_private. 6) Replace the use of sizeof and static defines as appropriate 7) Add appropriate casts for the MAD data when calling processing functions. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Support alternate Base Versions when creating MADsIra Weiny1-1/+2
In preparation to support the new OPA MAD Base version, add a base version parameter to ib_create_send_mad and set it to IB_MGMT_BASE_VERSION for current users. Definition of the new base version and it's processing will occur in later patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02IB/core cleanup: Add const to args - agent_send_responseIra Weiny1-4/+4
In order to support constant callers of agent_send_response we add const specifiers to the its pointer arguments. Adjust the call tree accordingly. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18IB/Verbs: Use management helper rdma_cap_ib_smi()Michael Wang1-1/+1
Introduce helper rdma_cap_ib_smi() to help us check if the port of an IB device support Infiniband Subnet Management Interface. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18IB/Verbs: Reform IB-core mad/agent/user_madMichael Wang1-1/+1
Use raw management helpers to reform IB-core mad/agent/user_mad. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2014-08-10IB/mad: add new ioctl to ABI to support new registration optionsIra Weiny1-2/+2
Registrations options are specified through flags. Definitions of flags will be in subsequent patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-10IB/mad: Update module to [pr|dev]_* style print messagesIra Weiny1-6/+6
Use dev_* style print when struct device is available. Also combine previously line broken user-visible strings as per Documentation/CodingStyle: "However, never break user-visible strings such as printk messages, because that breaks the ability to grep for them." Signed-off-by: Ira Weiny <ira.weiny@intel.com> [ Remove PFX so the patch actually builds. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-18IB/mad: Improve an error message so error code is includedMichael Heinz1-1/+2
Signed-off-by: Michael Heinz <michael.heinz@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2010-10-13IB/mad: IBoE supports only QP1 (no QP0)Eli Cohen1-12/+17
Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: agent_send_response() should be voidHal Rosenstock1-14/+10
Nothing looks at the return value of agent_send_response(), so there's no point in returning anything. Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/mad: Enhance SMI for switch supportHal Rosenstock1-3/+16
Extend the SMI with switch (intermediate hop) support. Care has been taken to ensure that the CA (and router) code paths are changed as little as possible. Signed-off-by: Suresh Shelvapille <suri@baymicrosystems.com> Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mad: Simplify SMI by eliminating smi_check_local_dr_smp()Ralph Campbell1-16/+0
The call to ib_get_agent_port() shouldn't be possible to fail when smi_check_local_dr_smp() is called from ib_mad_recv_done_handler(). When it is called from handle_outgoing_dr_smp(), the device and port_num come from mad_agent_priv so I assume the call to ib_get_agent_port() shouldn't fail either. In either case, smi_check_local_smp() only uses the mad_agent pointer to check that mad_agent->device->process_mad is not NULL. The device pointer would have to be the same as the one passed to smi_check_local_dr_smp() since that pointer is used later instead of the one checked in smi_check_local_smp(). Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mad: Remove redundant check from smi_check_local_dr_smp()Ralph Campbell1-3/+0
smi_check_local_dr_smp() is called only from two places in core/mad.c It returns 0 or 1. In smi_check_local_dr_smp(), it checks for a directed route SMP but this function is only called when the SMP is a directed route so this is a NOP. Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-07[PATCH] fix remaining missing includesTim Schmielau1-0/+3
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02[IB] kzalloc() conversionsRoland Dreier1-2/+1
Replace kmalloc()+memset(,0,) with kzalloc(), for a net savings of 35 source lines and about 500 bytes of text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-25[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mappedSean Hefty1-217/+76
The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: move include files to include/rdmaRoland Dreier1-1/+1
Move the InfiniBand headers from drivers/infiniband/include to include/rdma. This allows InfiniBand-using code to live elsewhere, and lets us remove the ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: Add copyright noticesRoland Dreier1-5/+6
Make some lawyers happy and add copyright notices for people who forgot to include them when they actually touched the code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-07-27[PATCH] IB: A couple of IB core bug fixesHal Rosenstock1-4/+4
Replace be32_to_cpup with be32_to_cpu and fix bug referencing pointer rather than value in ib_create_ah_from_wc(). Signed-off-by: Tom Duffy <tduffy@sun.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] IB: Update MAD client APIHal Rosenstock1-13/+1
Automatically allocate a MR when registering a MAD agent. MAD clients are modified to use this updated API. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] IB: Remove incorrect commentsHal Rosenstock1-2/+0
Eliminate unneeded and misleading comments Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+373
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 17:36:57 +0000