summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2014-01-14IB/usnic: Add Cisco VIC low-level hardware driverUpinder Malhi1-0/+1
This adds a driver that allows userspace to use UD-like QPs over a proprietary Cisco transport with Cisco's Virtual Interface Cards (VICs), including VIC 1240 and 1280 cards. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08mlx5: Add driver for Mellanox Connect-IB adaptersEli Cohen1-0/+1
The driver is comprised of two kernel modules: mlx5_ib and mlx5_core. This partitioning resembles what we have for mlx4, except that mlx5_ib is the pci device driver and not mlx5_core. mlx5_core is essentially a library that provides general functionality that is intended to be used by other Mellanox devices that will be introduced in the future. mlx5_ib has a similar role as any hardware device under drivers/infiniband/hw. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Merge in coccinelle fixes from Fengguang Wu <fengguang.wu@intel.com>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-25iser-target: Add iSCSI Extensions for RDMA (iSER) target driverNicholas Bellinger1-0/+1
This patch adds support for iSCSI Extensions for RDMA target mode, and includes CQ pooling per isert_device context distributed across multiple active iser target sessions. It also uses cmwq process context for RX / TX ib_post_cq() polling via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback() hardIRQ context callbacks. v5 changes: - Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or) - Fix make W=1 warnings (Or) - Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or) - Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun) - Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab) - Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab) v4 changes: - Mark isert_cq_rx_work as static (Or) - Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device calls for isert_cmd->sense_buf_dma from isert_put_response (Or) - Use 12288 for ISER_RX_PAD_SIZE base to save extra page per struct iser_rx_desc (Or + nab) - Drop now unnecessary isert_rx_desc usage, and convert RX users to iser_rx_desc (Or + nab) - Move isert_[alloc,free]_rx_descriptors() ahead of isert_create_device_ib_res() usage (nab) - Mark isert_cq_[rx,tx]_callback() + prototypes as static - Fix 'warning: 'ret' may be used uninitialized' warning for isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab) - Fix 'warning: 'ret' may be used uninitialized' warning for isert_connect_request on i386 allyesconfig (fengguang + nab) - Fix pr_debug conversion specification in isert_rx_completion() (fengguang + nab) - Drop unnecessary isert_conn->conn_cm_id != NULL check in isert_connect_release causing the build warning: "variable dereferenced before check 'isert_conn->conn_cm_id'" - Fix isert_lid + isert_np leak in isert_setup_np failure path - Add isert_conn->conn_wait_comp_err usage in isert_free_conn() for isert_cq_comp_err completion path - Add isert_conn->logout_posted bit to determine decrement of isert_conn->post_send_buf_count from logout response completion - Always set ISER_CONN_DOWN from isert_disconnect_work() callback v3 changes: - Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab) - Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct isert_qp_event_callback (Or) - Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in isert_create_device_ib_res (Or) - Add common isert_init_send_wr(), and convert isert_put_* calls (Or) - Move to verbs+core logic to single ib_isert.[c,h] (Or + nab) - Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab) - Move common ib_post_send() logic used by isert_put_*() to isert_post_response() (nab) - Add isert_put_reject call in isert_response_queue() for posting ISCSI_REJECT response. (nab) - Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab) v2 changes: - Drop unused ISERT_ADDR_ROUTE_TIMEOUT define - Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback() - Make isert_query_device() less verbose - Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR cases from isert_cma_handler() - Drop unused rdma/ib_fmr_pool.h include - Update isert_conn_setup_qp() to assign cq based upon least used - Add isert_create_device_ib_res() to setup PD, CQs and MRs for each underlying struct ib_device, instead of using per isert_conn resources. - Add isert_free_device_ib_res() to release PD, CQs and MRs for each underlying struct ib_device. - Add isert_device_find_by_ib_dev() - Change isert_connect_request() to drop PD, CQs and MRs allocation, and use isert_device_find_by_ib_dev() instead. - Add isert_device_try_release() - Change isert_connect_release() to decrement cq_active_qps, and drop PD, CQs and MRs resource release. - Update isert_connect_release() to call isert_device_try_release() - Make isert_create_device_ib_res() determine device->cqs_used based upon num_online_cpus() - Drop misleading isert_dump_ib_wc() usage - Drop unused rdma/ib_fmr_pool.h include - Use proper xfer_len for login PDUs in isert_rx_completion() - Add isert_release_cmd() usage - Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer - Change isert_put_cmd() to perform per iscsi_opcode specific release logic - Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd() - Change isert_send_completion() to call atomic_dec(&isert_conn->post_send_buf_count) based upon per iscsi_opcode logic - Drop ISTATE_REMOVE processing from isert_immediate_queue() - Drop ISTATE_SEND_DATAIN processing from isert_response_queue() - Drop ISTATE_SEND_STATUS processing from isert_response_queue() - Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd() - Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic - Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling logic - Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic - Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling logic - Add explict iscsit_stop_dataout_timer() call to isert_do_rdma_read_comp() - Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout() caller - Drop ISTATE_SEND_R2T processing from isert_immediate_queue() - Drop unused rdma/ib_fmr_pool.h include - Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage - Add struct isert_device in order to support multiple EQs + CQ pooling - Add struct isert_cq_desc - Drop tasklets and cqs from isert_conn - Bump ISERT_MAX_CQ to 64 - Various minor checkpatch fixes Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-08RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapterParav Pandit1-0/+1
Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-12-16ib_srpt: Initial SRP Target merge for v3.3-rc1Bart Van Assche1-0/+1
This patch adds the kernel module ib_srpt SCSI RDMA Protocol (SRP) target implementation conforming to the SRP r16a specification for the mainline drivers/target infrastructure. This driver was originally developed by Vu Pham and has been optimized by Bart Van Assche and merged into upstream LIO based on his srpt-lio-4.1 branch here: https://github.com/bvanassche/srpt-lio/commits/srpt-lio-4.1/ This updated patch also contains the following two changes from lio-core-2.6.git/master. One is to fix a bug with 1 >= task->task_sg[] chained mappings in ib_srpt, and the other to convert the configfs control plane to reference IB Port GUID and struct srpt_port directly following mainline v4.x target_core_fabric_configfs.c convertion for ib_srpt to work with rtslib/rtsadmin v2 code. These seperate patches can be found here: ib_srpt: Fix bug with chainged SGLs in srpt_map_sg_to_ib_sge http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=ea485147563b6555a97dbf811825fbb586519252 ib_srpt: Convert se_wwn endpoint reference to struct srpt_port->port_wwn http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=4e544a210acb227df1bb4ca5086e65bdf4e648ea This also includes the following recent v1 -> v2 review changes: ib_srpt: Fix potential out-of-bounds array access ib_srpt: Avoid failed multipart RDMA transfers ib_srpt: Fix srpt_alloc_fabric_acl failure case return value ib_srpt: Update comments to reference $driver/$port layout ib_srpt: Fix sport->port_guid formatting code ib_srpt: Remove legacy use_port_guid_in_session_name module parameter ib_srpt: Convert srp_max_rdma_size into per port configfs attribute ib_srpt: Convert srp_max_rsp_size into per port configfs attribute ib_srpt: Convert srpt_sq_size into per port configfs attribute and v2 -> v3 review changes: ib_srpt: Fix possible race with srp_sq_size in srpt_create_ch_ib ib_srpt: Fix possible race with srp_max_rsp_size in srpt_release_channel_work ib_srpt: Fix up MAX_SRPT_RDMA_SIZE define ib_srpt: Make srpt_map_sg_to_ib_sge() failure case return -EAGAIN ib_srpt: Convert port_guid to use subnet_prefix + interface_id formatting ib_srpt: Make srpt_check_stop_free return kref_put status ib_srpt: Make compilation with BUG=n proceed` ib_srpt: Use new target_core_fabric.h include ib_srpt: Check hex2bin() return code to silence build warning Cc: Bart Van Assche <bvanassche@acm.org> Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Vu Pham <vu@mellanox.com> Cc: David Dillow <dillowda@ornl.gov> Signed-off-by: Nicholas A. Bellinger <nab@risingtidesystems.com>
2010-05-23IB/qib: Add new qib driver for QLogic PCIe InfiniBand adaptersRalph Campbell1-0/+1
Add a low-level IB driver for QLogic PCIe adapters. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-21RDMA/cxgb4: Add driver for Chelsio T4 RNICSteve Wise1-0/+1
Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04RDMA/nes: Add a driver for NetEffect RNICsGlenn Streiff1-0/+1
Add a standard NIC and RDMA/iWARP driver for NetEffect 1/10Gb ethernet adapters. Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adaptersRoland Dreier1-0/+1
Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12RDMA/cxgb3: Add driver for Chelsio T3 RNICSteve Wise1-0/+1
Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA/amso1100: Add driver for Ammasso 1100 RNICTom Tucker1-0/+1
Add a driver for the Ammasso 1100 gigabit ethernet RNIC. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: merge ipath_core and ib_ipath driversBryan O'Sullivan1-1/+1
There is little point in keeping the two drivers separate, so we are merging them. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ehca: Add driver for IBM eHCA InfiniBand adaptersHeiko J Schick1-0/+1
Add a driver for IBM GX bus InfiniBand adapters, which are usable with some pSeries/System p systems. Signed-off-by: Heiko J Schick <schickhj.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/iser: iSER Kconfig and MakefileOr Gerlitz1-0/+1
Kconfig and Makefile for iSER. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31IB/ipath: kbuild infrastructureBryan O'Sullivan1-0/+1
Integrate the ipath core and OpenIB drivers into the kernel build infrastructure. Add entry to MAINTAINERS. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02IB: Add SCSI RDMA Protocol (SRP) initiatorRoland Dreier1-0/+1
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator. This driver is used to talk talk to InfiniBand SRP targets (storage devices). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!