summaryrefslogtreecommitdiffstats
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2019-05-05iio: stmpe-adc: Remove unnecessary assignmentPhilippe Schenker1-2/+0
Remove unnecessary assignment. This could potentially cause an issue, if the wait function runs into a timeout. Furthermore is this assignment also not there in stmpe_read_temp() Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05iio: adc: rcar-gyroadc: Remove devm_iio_device_alloc() error printingGeert Uytterhoeven1-3/+1
devm_iio_device_alloc() can only fail due to a memory or IDA allocation failure. Hence there is no need to print a message, as the memory allocation or IIO core code already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: dac: ad5758: remove set but not used variable 'dc_dc_mode'YueHaibing1-6/+3
Fixes gcc '-Wunused-but-set-variable' warning: drivers/iio/dac/ad5758.c: In function ad5758_write_powerdown: drivers/iio/dac/ad5758.c:585:15: warning: variable dc_dc_mode set but not used [-Wunused-but-set-variable] It is not used any more since commit edde945257e2 ("iio: dac: ad5758: Modifications for new revision") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: cros_ec: add 'id' sysfs entryGwendal Grignou1-0/+14
This new sysfs entry is used to interpret ring buffer information, mainly by Android sensor HAL. It expand to all sensors, the documentation about 'id' we can found in Documentation/ABI/testing/sysfs-bus-iio-cros-ec. Also fix typo in docs, I replace 'Septembre' by 'September'. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: adc: stm32-dfsdm: missing error case during probeFabien Dessenne1-2/+6
During probe, check the devm_ioremap_resource() error value. Also return the devm_clk_get() error value instead of -EINVAL. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: adc: stm32-dfsdm: manage the get_irq error caseFabien Dessenne1-0/+6
During probe, check the "get_irq" error value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: dac: ad5758: declare missing of tableDaniel Gomez1-0/+9
Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/iio/dac/ad5758.ko | grep alias alias: spi:ad5758 After this patch: modinfo drivers/iio/dac/ad5758.ko | grep alias alias: spi:ad5758 alias: of:N*T*Cadi,ad5758C* alias: of:N*T*Cadi,ad5758 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: adxl372: declare missing of tableDaniel Gomez1-0/+9
Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/iio/accel/adxl372_spi.ko | grep alias After this patch: modinfo drivers/iio/accel/adxl372_spi.ko | grep alias alias: spi:adxl372 alias: of:N*T*Cadi,adxl372C* alias: of:N*T*Cadi,adxl372 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: accel: kxsd9: declare missing of tableDaniel Gomez1-0/+9
Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/iio/accel/kxsd9-spi.ko | grep alias alias: spi:kxsd9 After this patch: modinfo drivers/iio/accel/kxsd9-spi.ko | grep alias alias: spi:kxsd9 alias: of:N*T*Ckionix,kxsd9C* alias: of:N*T*Ckionix,kxsd9 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: temperature: maxim_thermocouple: declare missing of tableDaniel Gomez1-0/+10
Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/iio/temperature/maxim_thermocouple.ko | grep alias alias: spi:max31855 alias: spi:max6675 After this patch: modinfo drivers/iio/temperature/maxim_thermocouple.ko | grep alias alias: spi:max31855 alias: spi:max6675 alias: of:N*T*Cmaxim,max31855C* alias: of:N*T*Cmaxim,max31855 alias: of:N*T*Cmaxim,max6675C* alias: of:N*T*Cmaxim,max6675 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-27iio: adc: at91: Use dev_get_drvdata()Kefeng Wang2-10/+6
Using dev_get_drvdata directly. Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: linux-iio@vger.kernel.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-25counter: stm32-lptimer: add counter deviceFabrice Gasnier5-463/+0
Add support for new counter device to stm32-lptimer. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25counter: 104-quad-8: Add Generic Counter interface supportWilliam Breathitt Gray3-641/+0
This patch adds support for the Generic Counter interface to the 104-QUAD-8 driver. The existing 104-QUAD-8 device interface should not be affected by this patch; all changes are intended as supplemental additions as perceived by the user. Generic Counter Counts are created for the eight quadrature channel counts, as well as their respective quadrature A and B Signals (which are associated via respective Synapse structures) and respective index Signals. The new Generic Counter interface sysfs attributes are intended to expose the same functionality and data available via the existing 104-QUAD-8 IIO device interface; the Generic Counter interface serves to provide the respective functionality and data in a standard way expected of counter devices. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25iio: 104-quad-8: Update license boilerplateWilliam Breathitt Gray1-9/+1
This patch simplifies the boilerplate license text by making use of a SPDX license identifier line. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25Merge tag 'iio-for-5.2b' of ↵Greg Kroah-Hartman32-226/+1983
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanup for the 5.2 cycle. New device suport * ad7606 - Support the AD7616 16 channel, 12bit ADC. * fxas21002c - New driver for this gyroscope with I2C and SPI support. * lsm6dsx - Support the lsm6dsr, new device information structure and dt bindings. * srf04 - Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 + support of different required trigger pulse lengths. * st-accel - Support the ls2de12, new device info and dt bindings. * ti-ads8344 - New driver for this 8 channel, 16 bit SPI ADC. Binding conversions to yaml - we have started doing these in general for IIO. * avia-hx711 * bmp085 Cleanups and minor fixes / additions * ad5758 - Fixup for some changes between preproduction parts and final part. * ad7606 - Refactor handling of oversampling to make it easy to vary between supported devices. * ad9832 - Organise includes. - Clock framework to handle clocks. * ad9834 - Drop unnecessary parenthesis. * bmc150 - Use __func__ rather than hardcoding. * dummy_evgen. - Fix a memleak on error in probe. * kxcjk1013 - Add KXCJ91008 ACPI ID as seen in the wild. - Use __func__ rather than hardcoding. * imx7d - Local dev variable to simplify code a bit. - dev_err replaces pr_err to give more info. - devm_platform_ioremap_resource for small reduction in boilerplate. - Simplify probe and remove by sharing suspend / resume logic. - Devm for iio_device_register as remove only contains the unregister. * lsm6dsx - Remove a variable that was never read. - Open code values where they are effectively described by what is assigned to them rather than using uninformative defines. * max31856 - Avoid an unintialized ret variable in a path that can't actually occur but is hard for a static checker to know. * max9611 - White space * mpu3050 - Reduce a sleep worst case by switching from msleep to usleep_range. * qcom-spmi-adc5 - Add MODULE_DEVICE_TABLE to assist autoloading of this as a module. * stm32-dfsdm - Fix missing dependencies. * stm32-timer trigger - Fix a build issue when disabled. * ti-ads7950 - Fix mising dependency on CONFIG_GPIOLIB. * tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits) iio: adc: qcom-spmi-adc5: Fix of-based module autoloading iio: dummy_evgen: fix possible memleak in evgen init iio:accel:Switch hardcoded function name with a reference to __func__ making the code more maintainable iio: adc: stm32-dfsdm: fix triggered buffer build dependency iio: adc: stm32-dfsdm: fix unmet direct dependencies detected iio: trigger: stm32-timer: fix build issue when disabled iio: imx7d_adc: Use devm_iio_device_register() iio: imx7d_adc: Simplify imx7d_adc_remove() with imx7d_adc_suspend() iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume() drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch warning. iio: dac: ad5758: Modifications for new revision iio: imu: st_lsm6dsx: inline per-sensor data iio: adc: Add driver for the TI ADS8344 A/DC chips dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips MAINTAINERS: add entry for fxas21002c gyro driver iio: gyro: fxas21002c: add spi driver iio: gyro: fxas21002c: add i2c driver iio: gyro: add core driver for fxas21002c iio: gyro: add DT bindings to fxas21002c Kconfig: change configuration of srf04 ultrasonic iio sensor ...
2019-04-22iio: adc: qcom-spmi-adc5: Fix of-based module autoloadingBjorn Andersson1-0/+1
The of_device_id table needs to be registered as module alias in order for automatic module loading to pick the kernel module based on the DeviceTree compatible. So add MODULE_DEVICE_TABLE() to make this happen. Fixes: e13d757279bb ("iio: adc: Add QCOM SPMI PMIC5 ADC driver") Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: dummy_evgen: fix possible memleak in evgen initPan Bian1-1/+4
The memory allocated in the function iio_dummy_evgen_create is not released if it fails to add the evgen device to device hierarchy. This may result in a memory leak bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio:accel:Switch hardcoded function name with a reference to __func__ making ↵Mohan Kumar2-2/+2
the code more maintainable It fixes the following checkpatch.pl warning: WARNING: Prefer using '"%s...", __func__' to using function's name, in a string Signed-off-by: Mohan Kumar <mohankumar718@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: adc: stm32-dfsdm: fix triggered buffer build dependencyFabrice Gasnier1-0/+1
This fixes build errors seen when CONFIG_STM32_DFSDM_ADC is set, as stm32-dfsdm-adc driver now also relies on triggered buffer API: Fixes: 11646e81d775 ("iio: adc: stm32-dfsdm: add support for buffer modes") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: adc: stm32-dfsdm: fix unmet direct dependencies detectedFabrice Gasnier1-0/+1
This fixes unmet direct dependencies seen when CONFIG_STM32_DFSDM_ADC is selected: WARNING: unmet direct dependencies detected for IIO_BUFFER_HW_CONSUMER Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - STM32_DFSDM_ADC [=y] && IIO [=y] && (ARCH_STM32 [=y] && OF [=y] || COMPILE_TEST [=n]) Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: imx7d_adc: Use devm_iio_device_register()Andrey Smirnov1-12/+1
Use devm_iio_device_register() and drop imx7d_adc_remove(). Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: imx7d_adc: Simplify imx7d_adc_remove() with imx7d_adc_suspend()Andrey Smirnov1-22/+24
Since imx7d_adc_remove() does exactly the same thing as imx7d_adc_suspend() we can use the latter together with devm_add_action_or_reset() to simplify the former. Rename imx7d_adc_suspend() to imx7d_adc_disable() for clarity while at it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume()Andrey Smirnov1-52/+36
Initialization sequence performed in imx7d_adc_resume() is exactly the same as the one being done in imx7d_adc_probe(). Make use of the former in the latter to avoid code duplication. Rename imx7d_adc_resume() to imx7d_adc_enable() for clarity while at it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch ↵Mohan Kumar1-1/+1
warning. As per Documentation/timers/timers-howto.txt Msleep < 20ms can sleep for up to 20ms. so use usleep_range. Signed-off-by: Mohan Kumar <mohankumar718@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: dac: ad5758: Modifications for new revisionMircea Caprioru1-37/+18
This patch will ensure compatibility with the new revision of the AD5758 dac converter. The modifications consist of removing the fault_prot_switch function since this option is no longer available, and enabling the ENABLE_PPC_BUFFERS bit in ADC_CONFIG register before setting the PPC current mode. The previous version of the chip was never released to customers so there is no need to support it going forwards. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: imu: st_lsm6dsx: inline per-sensor dataLorenzo Bianconi1-34/+16
As it has been already done for other st sensors in 'commit 9049531c91b4 ("iio: accel: st_accel: inline per-sensor data")', get rid of some defines and just open code the values into the appropriate struct elements since the semantic meaning is inherent in the name of the C99-addressable fields and there is no reason to duplicate the code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: adc: Add driver for the TI ADS8344 A/DC chipsGregory CLEMENT3-0/+215
This adds support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: gyro: fxas21002c: add spi driverRui Miguel Silva3-1/+77
Add driver to talk over spi to a fxas21002c gyroscope device and use the core as main controller. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: gyro: fxas21002c: add i2c driverRui Miguel Silva3-0/+76
Add the real driver to talk over i2c and use the fxas21002c core for the main tasks. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-22iio: gyro: add core driver for fxas21002cRui Miguel Silva4-0/+1166
Add core support for the NXP fxas21002c Tri-axis gyroscope, using the iio subsystem. It supports PM operations, axis reading, temperature, scale factor of the axis, high pass and low pass filtering, and sampling frequency selection. It will have extras modules to support the communication over i2c and spi. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-21Merge 5.1-rc6 into staging-nextGreg Kroah-Hartman15-95/+178
We want the fixes in here as well as this resolves an iio driver merge issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-14Kconfig: change configuration of srf04 ultrasonic iio sensorAndreas Klinger1-2/+9
reword configuration option for SRF04 list supported types in help text Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14srf04.c: add maxbotix ultrasonic sensorsAndreas Klinger1-9/+29
add Maxbotix LV ultrasonic sensor types mb1000, mb1010, mb1020, mb1030 and mb1040 add a configuration struct with the different trigger pulse lengths Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: adc: ti-ads7950: Fix build error without CONFIG_GPIOLIBYueHaibing1-1/+1
When building with CONFIG_GPIOLIB is not set gcc warns this: drivers/iio/adc/ti-ads7950.c:75:19: error: field chip has incomplete type struct gpio_chip chip; ^~~~ drivers/iio/adc/ti-ads7950.c: In function ti_ads7950_set: drivers/iio/adc/ti-ads7950.c:409:32: error: implicit declaration of function gpiochip_get_data; did you mean acpi_get_data? [-Werror=implicit-function-declaration] struct ti_ads7950_state *st = gpiochip_get_data(chip); ^~~~~~~~~~~~~~~~~ acpi_get_data Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: c97dce792dc8 ("iio: adc: ti-ads7950: add GPIO support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Justin Chen <justinpopo6@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: temperature: max31856: fix uninitialized error returnColin Ian King1-0/+3
Currently if mask is neither CHAN_INFO_RAW or CHAN_INFO_SCALE then then an uninitialized error return 'ret' is returned. Fix this by adding a default case that ensures -EINVAL is returned for this specific case. Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: imu: st_lsm6dsx: remove set but not used variables 'acc_sensor' and ↵YueHaibing1-4/+0
'gyro_sensor' Fixes gcc '-Wunused-but-set-variable' warning: drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c: In function 'st_lsm6dsx_read_tagged_fifo': drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:520:41: warning: variable 'gyro_sensor' set but not used [-Wunused-but-set-variable] drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:520:28: warning: variable 'acc_sensor' set but not used [-Wunused-but-set-variable] They are not used since commit 14c7c6e1a860 ("iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: accel: add support to LIS2DE12Robert Jones4-1/+84
Add support to STMicroelectronics LIS2DE12 accelerometer in st_accel framework. http://www.st.com/resource/en/datasheet/lis2de12.pdf Signed-off-by: Robert Jones <rjones@gateworks.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: accel: kxcjk1013: Add KIOX0008 ACPI Hardware-IDValentin Manea1-0/+1
Add the ACPI ID for KXCJ9 sensor seen on the a Teclast X80 Power tablet. Signed-off-by: Valentin Manea <linux-iio@mrs.ro> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: imx7d_adc: Use devm_platform_ioremap_resource()Andrey Smirnov1-3/+1
Use devm_platform_ioremap_resource() to be able to drop a bit of explicit boilerplate code. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: imx7d_adc: Replace pr_err with dev_errAndrey Smirnov1-2/+3
Replace combination of pr_err()/dev_name() with an equivalent call for dev_err(). Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: imx7d_adc: Add local struct device pointer in imx7d_adc_probe()Andrey Smirnov1-19/+18
Use a local "struct device *dev" in imx7d_adc_probe() for brevity. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: adc: ad7616: Add support for AD7616 ADCBeniamin Bia3-3/+54
The AD7616 is a 12-bit ADC with 16 channels. The AD7616 can be configured to work in hardware mode by controlling it via gpio pins and read data via spi. No support for software mode yet, but it is a work in progress. This device requires a reset in order to update oversampling, so chip info has got a new attribute to mark this. The current assumption that this driver makes for AD7616, is that it's working in Hardware Mode with Serial, Burst and Sequencer modes activated. To activate them, following pins must be pulled high: -SER/PAR -SEQEN And following must be pulled low: -WR/BURST -DB4/SEQEN Datasheets: Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7616.pdf Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: adc: ad7606: Move oversampling options in chip info and rework *_avail ↵Stefan Popa2-23/+67
attributes Available oversampling ratios and scales can be shown by calling a common ad7606_show_avail function which takes as parameters the array which stores the values, together with the size of the array. Oversampling options are now defined in chip info structure and they are loaded at probe. Has_Oversampling attribute was removed because oversampling_num was added and it is not needed anymore. The purpose of this patch is to deal with the scale_avail and oversampling_avail arrays in a generic way. This makes it easier to add support for new devices which will work with different scales and oversampling ratios. It is also an intermediate step for adding support for ad7616 which has different oversampling sampling ratios available. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14iio: adc: Fix MAX9611 spacingFabrizio Castro1-1/+1
Between "config" and "MAX9611" there is a tab, replace it with a space. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-07iio: imu: st_lsm6dsx: add support to LSM6DSRLorenzo Bianconi6-6/+83
Add support to STM LSM6DSR 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/lsm6dsr.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertionLars-Peter Clausen1-5/+11
For devices from the SigmaDelta family we need to keep CS low when doing a conversion, since the device will use the MISO line as a interrupt to indicate that the conversion is complete. This is why the driver locks the SPI bus and when the SPI bus is locked keeps as long as a conversion is going on. The current implementation gets one small detail wrong though. CS is only de-asserted after the SPI bus is unlocked. This means it is possible for a different SPI device on the same bus to send a message which would be wrongfully be addressed to the SigmaDelta device as well. Make sure that the last SPI transfer that is done while holding the SPI bus lock de-asserts the CS signal. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <Alexandru.Ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: adc: stm32-dfsdm: add PM supportFabrice Gasnier2-32/+206
Add PM and runtime PM support to STM32 DFSDM drivers: - stm32-dfsdm-core: manage clocks. - stm32-dfsdm-adc: restore channels configuration upon resume. Also stop restart everything in case of buffer mode. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: adc: stm32-dfsdm: improve sampling frequency accuracyFabrice Gasnier1-26/+30
The sample frequency is driven using the oversampling ratio depending on the SPI bus frequency. Currently, oversampling ratio is computed by an entire division: - spi_freq / sample_freq. This may result in inaccurate value. Using DIV_ROUND_CLOSEST improves resulting sample frequency, which is useful for audio that requests fixed rates (such as: 8, 16 or 32 kHz). BTW, introduce new routine to re-factor sample frequency setting, and move frequency accuracy message from warning to debug level. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio:temperature: Add MAX31856 thermocouple supportParesh Chaudhary3-0/+364
This patch adds support for Maxim MAX31856 thermocouple temperature sensor support. More information can be found in: https://www.maximintegrated.com/en/ds/MAX31856.pdf NOTE: Driver support only Comparator Mode. Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com> Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: frequency: ad9523: Fix typo in ad9523_platform_dataLars-Peter Clausen1-8/+8
Replace diff_{m1,m2} with div_{m1,m2} since they are dividers and not a differential settings. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-15 08:15:44 +0000