summaryrefslogtreecommitdiffstats
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook1-3/+3
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-14Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfsLinus Torvalds6-10/+10
Pull configfs updates from Christoph Hellwig: "A couple of configfs cleanups: - proper use of the bool type (Thomas Meyer) - constification of struct config_item_type (Bhumika Goyal)" * tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs: RDMA/cma: make config_item_type const stm class: make config_item_type const ACPI: configfs: make config_item_type const nvmet: make config_item_type const usb: gadget: configfs: make config_item_type const PCI: endpoint: make config_item_type const iio: make function argument and some structures const usb: gadget: make config_item_type structures const dlm: make config_item_type const netconsole: make config_item_type const nullb: make config_item_type const ocfs2/cluster: make config_item_type const target: make config_item_type const configfs: make ci_type field, some pointers and function arguments const configfs: make config_item_type const configfs: Fix bool initialization/comparison
2017-11-13Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds281-1091/+3227
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman34-0/+34
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27Merge tag 'iio-for-4.15c' of ↵Greg Kroah-Hartman7-5/+396
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of new device support, cleanups and features for IIO in the 4.15 cycle New device support * ti-dac082s085 dac - new driver supporting 8, 10 and 12 bit TI DACs with 2 and 4 channels: DAC082S085, DAC102S085, DAC122S085, DAC104s085 and DAC124S085. Minor features and cleanps * adc12138 - make array ch_to_mux static for small object code size reduction. * sun4i-gpadc - use of_device_get_match_data rather than opencoding it. * stm32 trigger - add tim15 tigger on STM32H7 - check clock rate to avoid potential division by zero * tsl2x7x staging cleanups. - move *_thresh_period to being created by IIO core. - remove unused tsl2x7x_parse_result structure. - sort includes - drop a repeat iio_dev forward definition - fix some code alignment of defines. - use IIO_CONST_ATTR for constant string attribute - drop some unnecessary parentheses - fix various alignment with parenthese - rename power defines for readability reasons - fix a missaligned break statement - Tidy up function definitions so they fit on a single line.
2017-10-23Merge 4.14-rc6 into staging-nextGreg Kroah-Hartman5-26/+75
We want the IIO and staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21iio: dac: ti-dac082s085: Read chip spec from device tableLukas Wunner1-9/+26
The two properties unique to each supported chip, resolution and number of channels, are currently gleaned from the chip's name. E.g. dac102s085 is a dual channel 10-bit DAC. ^^^ This was deemed unmaintainable by the subsystem maintainer once the driver is extended to support further chips, hence it was requested to add an explicit table for chip-specific information and use an enum to reference into it. This adds 17 LoC without any immediate gain, so make the change in a separate commit which can be reverted if we determine in 10 years that it was unnecessary. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-21iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driverLukas Wunner3-0/+362
The DACrrcS085 (rr = 08/10/12, c = 2/4) family of SPI DACs was inherited by TI when they acquired National Semiconductor in 2011. This driver was developed for and tested with the DAC082S085 built into the Revolution Pi by KUNBUS, but should work with any of the other chips as they share the same programming interface. There is also a family of I2C DACs with just a single channel called DACrr1C08x (rr = 08/10/12, x = 1/5). Their programming interface is very similar and it should be possible to extend the driver for these chips with moderate effort. Alternatively they could be integrated into ad5446.c. (The AD5301/AD5311/AD5321 use different power-down modes but otherwise appear to be comparable.) Furthermore there is a family of 8-channel DACs called DACrr8S085 (rr = 08/10/12) as well as two 16-bit DACs called DAC161Sxxx (xxx = 055/997). These are more complicated devices with support for daisy-chaining and the ability to power down each channel separately. They could either be handled by a separate driver or integrated into the present driver with a larger effort. Cc: Mathias Duckeck <m.duckeck@kunbus.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-21iio: adc: sun4i-gpadc: use of_device_get_match_dataCorentin Labbe1-4/+2
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-21iio: adc: adc12138: make array ch_to_mux static, makes object code smallerColin Ian King1-1/+1
Don't populate const array ch_to_mux on the stack, instead make it static. Makes the object code smaller by over 200 bytes: Before: text data bss dec hex filename 12663 1648 128 14439 3867 drivers/iio/adc/ti-adc12138.o After text data bss dec hex filename 12353 1744 128 14225 3791 drivers/iio/adc/ti-adc12138.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-21iio: adc: stm32: add check on clock rateFabrice Gasnier1-0/+13
Add check on STM32 ADC clock rate to report an explicit error. This may avoid division by 0 later in stm32-adc driver. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-21iio: adc: stm32: add tim15 triggerFabrice Gasnier1-0/+1
Add TIM15_TRGO trigger that is now supported on STM32H7. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-19iio: make function argument and some structures constBhumika Goyal6-10/+10
Make the argument of the functions iio_sw{d/t}_group_init_type_name const as they are only passed to the function config_group_init_type_name having the argument as const. Make the config_item_type structures const as they are either passed to the functions having the argument as const or they are stored in the const "ci_type" field of a config_item structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-10-14platform/chrome: Add cros_ec_accel_legacy driverGwendal Grignou3-0/+436
Add driver to support older EC firmware that only support deprecated ec command. Rely on ACPI memory map register to access sensor information. Present same interface as the regular cros_ec sensor stack: - one iio device per accelerometer - use HTML5 axis definition - use iio abi units - accept calibration calls, but do nothing Chrome can use the same code than regular cros_ec sensor stack to calculate orientation and lid angle. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-14iio: adc: at91-sama5d2_adc: fix probe error on missing trigger propertyEugen Hristev1-16/+29
This fix allows platforms to probe correctly even if the trigger edge property is missing. The hardware trigger will no longer be registered in the sybsystem Preserves backwards compatibility with the support that was in the driver before the hardware trigger. https://storage.kernelci.org/mainline/master/v4.14-rc2-255-g74d83ec2b734/arm/sama5_defconfig/lab-free-electrons/boot-at91-sama5d2_xplained.txt Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Fixes: 5e1a1da0f ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-14iio: hid-sensor-trigger: Don't touch sensors unless user space requestsSrinivas Pandruvada1-3/+9
One of the user complained that on his system Thinkpad Yoga S1, with commit f1664eaacec3 ("iio: hid-sensor-trigger: Fix the race with user space powering up sensors") causes the system to resume immediately on suspend (S3 operation). On this system the sensor hub is on USB and is a wake up device from S3. So if any sensor sends data on motion, the system will wake up. This can be a legitimate use case to wake up device motion, but that needs proper user space support to set right thresholds. In fact the above commit didn't cause this regression, but any operation which cause sensors to wake up would have caused the same issue. So if user reads the raw sensor data, same issue occurs, with or without this commit. Only difference is that the above commit by default will trigger a power up and power down of sensors as part of runtime pm enable (runtime enable will cause a runtime resume callback followed by runtime_suspend callback). Previously user has to do some action on sensors. On investigation it was observed that the current driver correctly changing the state of all sensors to power off but then also some sensor will still send some data. Only option is to never power up any sensor. Only good option is to: - Using sysfs interface disable USB as a wakeup device (This will not need any driver change) Since some user don't care about sensors. So for those users this change brings back old functionality. As long as they don't cause any operation to power up sensors (like raw read or start iio-sensor-proxy service), the sensors will not be to touched. This is done by delaying run time enable till user space does some operation with sensors. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196853 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-14iio: proximity: Add rfd77402 driverPeter Meerwald-Stadler3-0/+363
Driver for RF Digital RFD77402 VCSEL (vertical-cavity surface-emitting laser) Time-of-Flight (ToF) sensor to measure distance up to 2 m with millimeter precision Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10iio: accel: add support to LIS3DHHLorenzo Bianconi3-0/+59
add support to STMicroelectronics LIS3DHH accel sensor http://www.st.com/resource/en/datasheet/lis3dhh.pdf Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10iio: common: st_sensors: check odr address value in st_sensors_set_odr()Lorenzo Bianconi1-0/+3
Do not try to configure sample frequency if the sensor do not export odr register address in register map. That change will be used to properly support LIS3DHH accel sensor. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10iio: st_sensors: split open-drain parameters for irq1 and irq2Lorenzo Bianconi3-17/+36
Define st_sensor_int_drdy structure in st_sensor_data_ready_irq in order to contain irq line parameters of the device. Moreover separate data-ready open-drain configuration parameters for INT1 and INT2 pins in st_sensor_data_ready_irq data structure. That change will be used to properly support LIS3DHH accel sensor. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10iio: pressure: st_pressure: add SPI-3wire support to st_pressure frameworkLorenzo Bianconi1-0/+16
Add SPI Serial Interface Mode (SIM) register information to STM pressure framework Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10iio: magnetometer: st_magn: add SPI-3wire support to LIS3MDLLorenzo Bianconi1-0/+4
Add SPI Serial Interface Mode (SIM) register information to LIS3MDL magn sensor Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10iio: gyro: st_gyro: add SPI-3wire support to st_gyro frameworkLorenzo Bianconi1-0/+12
Add SPI Serial Interface Mode (SIM) register information to STM gyroscope framework Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: add support to LIS2DW12Lorenzo Bianconi4-0/+91
add support to STMicroelectronics LIS2DW12 accelerometer in st_accel framework http://www.st.com/resource/en/datasheet/lis2dw12.pdf Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: st_sensors: do not always write enable_axis registerLorenzo Bianconi1-1/+4
New devices (e.g. LIS2DW12) enable all axis by default and do not export that capability in register map. Check if the enable_axis register address has been declared in st_sensor_settings map in order to verify if the driver needs to enable all sensor axis Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: st_sensors: decouple irq1 configuration parameters from the irq2 onesLorenzo Bianconi5-55/+94
Separate data-ready configuration parameters for INT1 and INT2 pins in st_sensor_data_ready_irq data structure. That change will be use to properly support LIS2DW12 accel sensor. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: st_sensors: add register mask for status registerLorenzo Bianconi6-28/+65
Introduce register mask for data-ready status register since pressure sensors (e.g. LPS22HB) export just two channels (BIT(0) and BIT(1)) and BIT(2) is marked reserved while in st_sensors_new_samples_available() value read from status register is masked using 0x7. Moreover do not mask status register using active_scan_mask since now status value is properly masked and if the result is not zero the interrupt has to be consumed by the driver. This fix an issue on LPS25H and LPS331AP where channel definition is swapped respect to status register. Furthermore that change allows to properly support new devices (e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register to figure out if the interrupt has been generated by the device. Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: adc: mcp320x: Add support for mcp3550/1/3Lukas Wunner2-7/+118
These ADCs are marketed as single-channel 22 bit delta-sigma ADCs, but in reality their resolution is 21 bit with an overrange or underrange of 12% beyond Vref. In other words, "full scale" means +/- 2^20. This driver does not explicitly signal back to the user when an overrange or underrange occurs, but the user can detect it by comparing the raw value to +/- 2^20 (or the scaled value to Vref). The chips feature an extended temperature range and high accuracy, low noise characteristics, but their conversion times are slow with up to 80 ms +/- 2% (on the MCP3550-50). Hence, unlike the other ADCs supported by the driver, conversion does not take place in realtime upon lowering CS. Instead, CS is asserted for 8 usec to start the conversion. After waiting for the duration of the conversion, the result can be fetched. While waiting, control of the bus is ceased so it may be used by a different device. After the result has been fetched and 10 us have passed, the chip goes into shutdown and an additional power-up delay of 144 clock periods is then required to wake the analog circuitry upon the next conversion (footnote below table 4-1, page 16 in the spec). Optionally, the chips can be used in so-called "continuous conversion mode": Conversions then take place continuously and the last result may be fetched at any time without observing a delay. The mode is enabled by permanently driving CS low, e.g. by wiring it to ground. The driver only supports "single conversion mode" for now but should be adaptable to "continuous conversion mode" with moderate effort. The chips clock out a 3 byte word, unlike the other ADCs supported by the driver which all have a lower resolution than 16 bit and thus make do with 2 bytes. Calculate the word length on probe by rounding up the resolution to full bytes. Crucially, if the clock idles low, the transfer is preceded by a useless Data Ready bit which increases its length from 24 bit to 25 bit = 4 bytes (section 5.5 in the spec). Autosense this based on the SPI slave's configuration. Cc: Mathias Duckeck <m.duckeck@kunbus.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhmStefan Brüns1-9/+9
According to the ABI documentation, the shunt resistor value should be specificied in Ohm. As this is also used/documented for the MAX9611, use the same for the INA2xx driver. This poses an ABI break for anyone actually altering the shunt value through the sysfs interface, it does not alter the default value nor a value set from the devicetree. Minor change: Fix comment, 1mA is 10^-3A. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: imu: st_lsm6dsx: add FIFO ops data structureLorenzo Bianconi3-15/+63
Introduce FIFO ops data structure to contain FIFO related parameters in order to properly support more devices in st_lsm6dsx driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: imu: st_lsm6dsx: move decimator info in st_lsm6dsx_sensor_settingsLorenzo Bianconi3-14/+47
Move FIFO decimator info in st_lsm6dsx_sensor_settings list since decimator registers are exported in register map just in lsm6ds3/lsm6ds3h/lsm6dsl/lsm6dsm sensors and not in other compliant devices Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: imu: st_lsm6dsx: split fifo mode and fifo odr configurationLorenzo Bianconi1-15/+17
Separate fifo mode and max fifo sample rate configuration. That change will be necessary to reuse st_lsm6dsx_set_fifo_mode() routine and to support more devices in st_lsm6dsx driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: imu: st_lsm6dsx: convert max_fifo_size in FIFO sample sizeLorenzo Bianconi1-6/+5
Express max fifo depth in ST_LSM6DSX_SAMPLE_SIZE instead of in bytes. That change will be necessary to properly support more devices in st_lsm6dsx driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: adc: rcar-gyroadc: Use of_device_get_match_data() helperGeert Uytterhoeven1-3/+2
Use the of_device_get_match_data() helper instead of open coding. Note that the rcar-gyroadc driver is used with DT only, so there's always a valid match. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: adc: rcar-gyroadc: Enable compile-testing on non-ARMGeert Uytterhoeven1-1/+1
The rcar-gyroadc driver compiles fine on other platforms, hence increase compile coverage. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: adc: rcar-gyroadc: Cast pointer to uintptr_t to fix warning on 64-bitGeert Uytterhoeven1-1/+1
On 64-bit: drivers/iio/adc/rcar-gyroadc.c: In function 'rcar_gyroadc_parse_subdevs': drivers/iio/adc/rcar-gyroadc.c:352:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] childmode = (unsigned int)of_id->data; ^ Cast the pointer to uintptr_t instead of unsigned int to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: dummy: evgen: use irq_simBartosz Golaszewski2-71/+20
Switch to using the recently added interrupt simulator for dummy irqs. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: light: vl6180: Correct ALS scale for non-default gain/integration timeStefan Brüns1-3/+6
The reported scale was only correct for the default settings of 100 ms integration time and gain 1. This aligns the reported scale with the behaviour of any other IIO driver and the documented ABI, but may require userspace changes if someone uses non-default settings. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: light: vl6180: Cleanup als_gain lookup, avoid register readbackStefan Brüns1-41/+44
Instead of manually iterating the array of allowed gain values, use find_closest. Storing the current gain setting avoids accessing the hardware on each query. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: light: vl6180: Avoid readback of integration time registerStefan Brüns1-6/+9
Instead of reading the value from the register on each query, store the set value. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: light: vl6180: Move range check to integration time setter, cleanupStefan Brüns1-7/+10
This improves code uniformity (range checks for als_gain are also done in the setter). Also unmangle rounding and calculation of register value. The calculated integration time it_ms is required in the next patch of the series. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: kxcjk1013: add support for KXTF9Michał Mirosław2-15/+104
KXTF9 has mostly compatible register layout to KXCJK accelerometer. There is no motion direction interrupt support, but there is tap direction detection instead (not implemented in this patch). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: kxcjk1013: make sampling_frequency_avail per-typeMichał Mirosław1-2/+3
Make sampling_frequency_avail per-type - like sampling_frequency is. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamicMichał Mirosław1-3/+12
In preparation for KXTF9 support, make sampling_frequency_avail attribute dynamic. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: kxcjk1013: extract report_motion_event() from interrupt handlerMichał Mirosław1-59/+67
Extract reporting of motion event direction from interrupt handler, as it is not supported by KXTF9. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit namesMichał Mirosław1-9/+14
Fix INT_CTRL1 bit names to match register name and add names for INT_SRC1 bits. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: kxcjk1003: refactor ODR settingMichał Mirosław1-57/+45
Refactor ODR/WUF setting code in preparation of KXTF9 support. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: mma8452: Rename read/write event value callbacks to generic ↵Harinath Nampally1-4/+4
function name. 'mma8452_read_thresh' and 'mma8452_write_thresh' functions does more than just read/write threshold values. They also handle IIO_EV_INFO_HIGH_PASS_FILTER_3DB and IIO_EV_INFO_PERIOD therefore renaming to generic names. Improves code readability, no impact on functionality. Signed-off-by: Harinath Nampally <harinath922@gmail.com> Acked-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: adc: sun4i-gpadc-iio: do not fail probing when no thermal DT nodeQuentin Schulz1-1/+5
Before this patch, forgetting to put a thermal-zones DT node would result in the driver failing to probe. It should be perfectly acceptable to have the driver probe even if no thermal-zones DT is found. However, it shouldn't want to fail if the thermal registering fail for any other reason (waiting for other drivers for example) so check on ENODEV only. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: adc: sun4i-gpadc-iio: register in the thermal after registering in pmQuentin Schulz1-19/+15
This driver has a get_temp function used by the thermal framework that uses pm functions. However, the driver isn't registered in pm before it is registered in thermal framework, resulting in the pm_resume not being called and thus the IP not enabled. When the IP is disabled, the raw temp value is always 0. With the devices currently supported, it isn't a problem since with their respective formula, they return a really cold SoC temperature which isn't a problem for the thermal framework. But for future SoC that have a different formula, it could return a critically hot temperature, forcing the thermal framework to shutdown the board. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 14:40:54 +0000